Unveiling singlet oxygen spin trapping in catalytic oxidation processes using in situ kinetic EPR analysis.

Singlet oxygen (1O2) plays a pivotal role in numerous catalytic oxidation processes utilized in water purification and chemical synthesis. The spin-trapping method based on electron paramagnetic resonance (EPR) analysis is commonly employed for 1O2 detection. However, it is often limited to time-independent acquisition. Recent studies have raised questions about the reliability of the 1O2 trapper, 2,2,6,6-tetramethylpiperidine (TEMP), in various systems. In this study, we introduce a comprehensive, kinetic examination to monitor the spin-trapping process in EPR analysis. The EPR intensity of the trapping product was used as a quantitative measurement to evaluate the concentration of 1O2 in aqueous systems. This in situ kinetic study was successfully applied to a classical photocatalytic system with exceptional accuracy. Furthermore, we demonstrated the feasibility of our approach in more intricate 1O2-driven catalytic oxidation processes for water decontamination and elucidated the molecular mechanism of direct TEMP oxidation. This method can avoid the false-positive results associated with the conventional 2D 1O2 detection techniques, and provide insights into the reaction mechanisms in 1O2-dominated catalytic oxidation processes. This work underscores the necessity of kinetic studies for spin-trapping EPR analysis, presenting an avenue for a comprehensive exploration of the mechanisms governing catalytic oxidation processes.

An experimental and modeling approach to describe the deactivation of cellulases at the air-liquid interface.

Understanding the reaction mechanisms involved in the enzymatic hydrolysis of cellulose is important because it is kinetically the most limiting step of the bioethanol production process. The present work focuses on the enzymatic deactivation at the air-liquid interface, which is one of the aspects contributing to this global deactivation. This phenomenon has already been experimentally proven, but this is the first time that a model has been proposed to describe it. Experiments were performed by incubating Celluclast cocktail solutions on an orbital stirring system at different enzyme concentrations and different surface-to-volume ratios. A 5-day follow-up was carried out by measuring the global FPase activity of cellulases for each condition tested. The activity loss was proven to depend on both the air-liquid surface area and the enzyme concentration. Both observations suggest that the loss of activity takes place at the air-liquid surface, the total amount of enzymes varying with volume or enzyme concentration. Furthermore, tests performed using five individual enzymes purified from a Trichoderma reesei cocktail showed that the only cellulase that is deactivated at the air-liquid interface is cellobiohydrolase II. From the experimental data collected by varying the initial enzyme concentration and the ratio surface to volume, it was possible to develop, for the first time, a model that describes the loss of activity at the air-liquid interface for this configuration.

Synthesis and biological evaluation of triazolones/oxadiazolones as novel urease inhibitors.

Urease is the main virulence factor of infectious gastritis and gastric ulcers. Urease inhibitors are regarded as the first choice for the treatment of such diseases. Based on the triazolone/oxadiazolone skeleton, a urea-like fragment being able to specifically bind the urease activity pocket and prevent urea from hydrolysis, we designed and synthesized 45 triazolones/oxadiazolones as urease inhibitors. Eight compounds were proved to show excellent inhibitory activity against Helicobacter pylori urease, being more potency than the clinically used urease inhibitor acetohydroxamic acid. The most active inhibitor with IC50 value of 1.2 µM was over 20-fold higher potent than the positive control. Enzymatic kinetic assays showed that these novel inhibitors reversibly inhibited urease with a mixed competitive mechanism. Molecular dockings provided evidence for the observations in enzyme assays. Furthermore, these novel inhibitors were proved as drug-like compounds with very low cytotoxicity to mammalian cells and favorable water solubility. These results suggested that triazolone and oxadiazolone were promising scaffolds for the design and discovery of novel urease inhibitors, and were expected as good candidates for further drug development.

Enhanced fluoride removal using montmorillonite clay modified with CoFe2O4 and metal-organic frameworks.

The use of modified clays can play an effective role as an effective adsorbent in removing fluoride (Flu) ions from water and aqueous solutions. In the present research, montmorillonite clay (MMt) was modified using CoFe2O4 magnetic particles and Al-Fe fumarate metal-organic framework (Al-Fe Fum) and was utilized as an efficient adsorbent for removing Flu from aqueous solution. The properties of MMt and MMt/CoFe2O4/Al-Fe Fum samples were investigated using different techniques. The results showed that with the modification of MMt using CoFe2O4 magnetic particles and the metal-organic framework of Al-Fe Fum, the BET surface has increased notably from 13.217 to 365.80 m2/g. To investigate the effect of independent variables and their interaction on the efficiency of the Flu adsorption, response surface method-central compound design (RSM-CCD) was served. Based on the results of ANOVA, the F-value and p-value parameters for the desired model were determined to be 783.09 and < 0.0001, respectively, which confirms the success and high ability of the model. The number of R2, adjusted R2, and Predicted R2 for adsorption of Flu ion was determined to be 0.998, 0.997, and 0.995, respectively, which shows that the proposed regression model can describe the process of adsorption and interaction between variables well. Compared to other kinetic models, the pseudo 2nd order kinetic model has a greater ability to describe the Flu adsorption behavior. The R2 parameter value determined that the Freundlich isotherm model has a suitable ability to investigate the isotherm behavior and confirms the effect of heterogeneous surfaces in the process. Generally, the outcomes signified that the MMt and MMt/CoFe2O4/Al-Fe Fum samples can be reused several times in the process of Flu adsorption, while the efficiency is more than 90%.

Progress and challenges in valorisation of biomass waste from ornamental trees pruning through pyrolysis processes. Prospects in the bioenergy sector.

Nowadays, the scarcity of energy resources is promoting the search for alternative energy sources, boosting interest in the use of forest lignocellulosic residue in the energy sector. In this study, the focus is on the energy recovery from two lignocellulosic residues originated during the pruning of ornamental trees (Horse Chestnut, CI, and False Acacia, FA). Both conventional and flash pyrolysis techniques were applied. The experimental pyrolysis variables were obtained from the study of the thermal behaviour of the pruning residues in thermogravimetric analysis. It was carried out under 5 heating rates and kinetic parameters were estimated using Flynn-Wall-Ozawa method. Results denoted higher maximum mass loss rate values for the same release temperature regions under FA experiments. Also, FA samples had lower final residues for the processes. However, activation energy values were so close for both species. FA was also linked to the faster reactions according frequency factor outcomes. Conventional pyrolysis of pruning residues was carried out in a horizontal oven of original design at a heating rate of 25 °C/min, at 750 °C and 60 min of permanence at that temperature; flash pyrolysis was tested in that oven at 750 and 850 °C. In these pyrolysis processes, three fractions were obtained: bio-char, bio-oil and gas. The physicochemical attributes of the bio-chars suggested their potential utility as biofuels (28.4-29.8 MJ/kg), adsorbent precursors or soil additives. Conventional pyrolysis bio-oils had a dominant monoaromatic hydrocarbons nature, with phenols being the most abundant (≥60%), while flash bio-oils contain mainly polycyclic aromatic hydrocarbons. Conventional pyrolysis gases contained up to 60 vol% of CO2; flash pyrolysis gases had high combustible gas content (CO, CH4, H2) and a low CO2 content (<25 vol%). As a result, their calorific value (18.06 MJ/kg) exhibited a threefold increase compared to the gas produced through conventional pyrolysis (6.04 MJ/kg).

Evaluation of borinic acids as new, fast hydrogen peroxide-responsive triggers.

Hydrogen peroxide (H2O2) is responsible for numerous damages when overproduced, and its detection is crucial for a better understanding of H2O2-mediated signaling in physiological and pathological processes. For this purpose, various "off-on" small fluorescent probes relying on a boronate trigger have been prepared, and this design has also been involved in the development of H2O2-activated prodrugs or theranostic tools. However, this design suffers from slow kinetics, preventing activation by H2O2 with a short response time. Therefore, faster H2O2-reactive groups are awaited. To address this issue, we have successfully developed and characterized a prototypic borinic-based fluorescent probe containing a coumarin scaffold. We determined its in vitro kinetic constants toward H2O2-promoted oxidation. We measured 1.9 × 104 m-1⋅s-1 as a second-order rate constant, which is 10,000-fold faster than its well-established boronic counterpart (1.8 m-1⋅s-1). This improved reactivity was also effective in a cellular context, rendering borinic acids an advantageous trigger for H2O2-mediated release of effectors such as fluorescent moieties.

Biodegradation of commercial textile reactive dye mixtures by industrial effluent adapted bacterial consortium VITPBC6: a potential technique for treating textile effluents.

Textile industries release major fraction of dyestuffs in effluents leading to a major environmental concern. These effluents often contain more than one dyestuff, which complicates dye degradation. In this study ten reactive dyes (Reactive Yellow 145, Reactive Yellow 160, Reactive Orange 16, Reactive Orange 107, Reactive Red 195, Reactive Blue 21, Reactive Blue 198, Reactive Blue 221, Reactive Blue 250, and Reactive Black 5) that are used in textile industries were subjected to biodegradation by a bacterial consortium VITPBC6, formulated in our previous study. Consortium VITPBC6 caused single dye degradation of all the mentioned dyes except for Reactive Yellow 160. Further, VITPBC6 efficiently degraded a five-dye mixture (Reactive Red 195, Reactive Orange 16, Reactive Black 5, Reactive Blue 221, and Reactive Blue 250). Kinetic studies revealed that the five-dye mixture was decolorized by VITPBC6 following zero order reaction kinetic; Vmax and Km values of the enzyme catalyzed five-dye decolorization were 128.88 mg L-1 day-1 and 1003.226 mg L-1 respectively. VITPBC6 degraded the dye mixture into delta-3,4,5,6-Tetrachlorocyclohexene, sulfuric acid, 1,2-dichloroethane, and hydroxyphenoxyethylaminohydroxypropanol. Phytotoxicity, cytogenotoxicity, microtoxicity, and biotoxicity assays conducted with the biodegraded metabolites revealed that VITPBC6 lowered the toxicity of five-dye mixture significantly after biodegradation.

A validated bioanalytical method for the simultaneous estimation of telmisartan and gallic acid in rat plasma samples by high-performance thin-layer chromatography-mass spectrometry: Application to an oral pharmacokinetic study.

A novel and cost-effective high-performance thin-layer chromatography (HPTLC) method, combined with densitometric quantification, was developed for the biomedical analysis of telmisartan (TEL) and gallic acid (GA). Recent research indicates that when used in combination, these compounds offer improved therapeutic efficacy for the treatment of cardiovascular diseases with reduced side effects. The study focused on the simultaneous quantification and pharmacokinetic analysis of drugs in rat plasma. The separation was conducted using HPTLC silica gel 60 F254 plates with dimensions of 20 × 10 cm and a thickness of 0.2 mm. The mobile phase used for separation consisted of a mixture of ethyl acetate, methanol, chloroform, and acetic acid in the ratio of 4:2:2:0.2 (v/v). GA and TEL were analyzed using ultraviolet detection at specific wavelengths, with GA at 280 nm and TEL at 296 nm. Peak purity was assessed through spectral correlation analysis using Vision CATS software. The method underwent validation following the guidelines of the US Food and Drug Administration (US FDA). Calibration plots demonstrated linearity in the concentration range of 200-1200 ng/spot, with high correlation coefficients (R2 ). The retention factors (Rf ) were 0.67 for TEL and 0.60 for GA. The identity of the separated compounds was further confirmed using MS, with GA having a mass-to-charge ratio (m/z) of 168.9 in negative mode and TEL with m/z 515.2 in positive mode. In the pharmacokinetic study, the maximum peak plasma concentration (Cmax ) for GA was 899.7 ng/mL, and for TEL, it was 1013 ng/mL. The time to reach maximum concentration (Tmax ) was 2 h for GA and 6 h for TEL. This simultaneous qualitative and quantitative determination of the drugs in an oral pharmacokinetic study involving Wistar rats can serve as a valuable tool for future investigations into pharmacokinetic interactions, quality control, and routine analysis of these drugs, both in their pure forms and in novel formulations.

Development and Optimization of a Bromothymol Blue-Based PLA2 Assay Involving POPC-Based Self-Assemblies.

Phospholipase A2 (PLA2) is a superfamily of phospholipase enzymes that dock at the water/oil interface of phospholipid assemblies, hydrolyzing the ester bond at the sn-2 position. The enzymatic activity of these enzymes differs based on the nature of the substrate, its supramolecular assemblies (micelle, liposomes), and their composition, reflecting the interfacial nature of the PLA2s and requiring assays able to directly quantify this interaction of the enzyme(s) with these supramolecular assemblies. We developed and optimized a simple, universal assay method employing the pH-sensitive indicator dye bromothymol blue (BTB), in which different POPC (3-palmitoyl-2-oleoyl-sn-glycero-1-phosphocholine) self-assemblies (liposomes or mixed micelles with Triton X-100 at different molar ratios) were used to assess the enzymatic activity. We used this assay to perform a comparative analysis of PLA2 kinetics on these supramolecular assemblies and to determine the kinetic parameters of PLA2 isozymes IB and IIA for each supramolecular POPC assembly. This assay is suitable for assessing the inhibition of PLA2s with great accuracy using UV-VIS spectrophotometry, being thus amenable for screening of PLA2 enzymes and their substrates and inhibitors in conditions very similar to physiologic ones.

Predictive modeling of plastic pyrolysis process for the evaluation of activation energy: Explainable artificial intelligence based comprehensive insights.

Pyrolysis, a thermochemical conversion approach of transforming plastic waste to energy has tremendous potential to manage the exponentially increasing plastic waste. However, understanding the process kinetics is fundamental to engineering a sustainable process. Conventional analysis techniques do not provide insights into the influence of characteristics of feedstock on the process kinetics. Present study exemplifies the efficacy of using machine learning for predictive modeling of pyrolysis of waste plastics to understand the complexities of the interrelations of predictor variables and their influence on activation energy. The activation energy for pyrolysis of waste plastics was evaluated using machine learning models namely Random Forest, XGBoost, CatBoost, and AdaBoost regression models. Feature selection based on the multicollinearity of data and hyperparameter tuning of the models utilizing RandomizedSearchCV was conducted. Random forest model outperformed the other models with coefficient of determination (R2) value of 0.941, root mean square error (RMSE) value of 14.69 and mean absolute error (MAE) value of 8.66 for the testing dataset. The explainable artificial intelligence-based feature importance plot and the summary plot of the shapely additive explanations projected fixed carbon content, ash content, conversion value, and carbon content as significant parameters of the model in the order; fixed carbon > carbon > ash content > degree of conversion. Present study highlighted the potential of machine learning as a powerful tool to understand the influence of the characteristics of plastic waste and the degree of conversion on the activation energy of a process that is essential for designing the large-scale operations and future scale-up of the process.

CH4 production potential of autotrophic nitrification bacteria produced in the submerged nitrification bioreactor in the laboratory and kinetic analysis.

In this study, CH4 production capacity of nitrification bacteria (NB) obtained from the submerged biofilter in the laboratory was investigated. Biochemical methane potential (BMP) test was carried out with the NB amount of zero (control, CR), 5% (R1), 10% (R2), and 15% (R3) at a temperature of about 37 ± 0.5°C. Compared to the CR, significantly higher cumulative CH4 volume of about 290, 490, and 715 mL were determined in the R1, R2, and R3, respectively. All the applied kinetic models gave good results (R2 ≥0.97), while the Transference Function and First-order models provided the better R2 values. The delay phase (λ) was not observed in the AD process, and CH4 production started immediately on the first day of operation. The predicted k value of 0.133 day-1 was high in CR, while it was approximately between 0.078 and 0.112 day-1 for the higher amount of NB containing BMP units, which indicated that the AD required long reaction time.

Synthesis of bis(2-aminoethyl)amine functionalized mesoporous silica (SBA-15) adsorbent for selective adsorption of Pb2+ ions from wastewater.

Rapid growth in the industry has released large quantities of contaminants, particularly metal discharges into the environment. Heavy metal poisoning in water bodies has become a major problem due to its toxicity to living organisms. In this study, we developed a 3-chloropropyl triethoxysilane incorporated mesoporous silica nanoparticle (SBA-15) based adsorbent utilizing the sol-gel process and Pluronic 123 (P123) as a structure-directing surfactant. Furthermore, the produced SBA-15 NPs were functionalized with bis(2-aminoethyl)amine (BDA) using the surface grafting approach. The physical and chemical properties of the prepared SBA-15@BDA NPs were determined using a variety of instruments, including small-angle X-ray diffraction (SAXS), Fourier-transform infrared (FTIR), scanning electron microscope (SEM), N2 adsorption-desorption, thermogravimetric, particle size distribution, and zeta potential analysis. The MSN has a large surface area of up to 574 m2/g, a pore volume of 0.57 cm3/g, and a well-ordered mesoporous nanostructure with an average pore size of 3.6 nm. The produced SBA-15@BDA NPs were used to adsorb selectively to lead (Pd2+) ions from an aqueous solution. The adsorption study was performed under various conditions, including the influence of solution pH, adsorbent dose, adsorption kinetics, adsorption selectivity in the presence of competing metal ions, and reusability. The results of the kinetic study demonstrated that SBA-15@BDA NPs absorb selectively Pb2+ ions via chemisorption. The SBA-15@BDA NPs show Pb2+ ions with a maximum adsorption capacity of ~ 88% and an adsorbed quantity of approximately ~ 112 mg/g from the studied aqueous solution. The adsorption mechanism relies on coordination bonding between Pb2+ ions and surface-functionalized amine groups on SBA-15@BDA NPs. Furthermore, the proposed SBA-15@BDA NPs adsorbent demonstrated excellent reusability over five cycles without significantly reducing adsorption performance. As a consequence, SBA-15@BDA NPs might serve as an effective adsorbent for the selective removal of Pb2+ ions from aqueous effluent.

Kinetic modeling and optimization of ethanol fermentation by the marine yeast Wickerhamomyces subpelliculosus ZE75.

The study aims to enhance ethanol production by Wickerhamomyces subpelliculosus ZE75 isolated from marine sediment. In addition, analyzing the kinetic parameters of ethanol production and optimization of the fermentation conditions was performed. The marine yeast isolate ZE75 was selected as the front runner ethanol-producer, with an ethanol yield of 89.77 gL-1. ZE75 was identified relying on the phenotypic and genotypic characteristics of W. subpelliculosus. The genotypic characterization based on the Internal Transcribed Spacer (ITS) sequence was deposited in the GenBank database with the accession number OP715873. The maximum specific ethanol production rate (vmax) was 0.482 gg-1 h-1 at 175 gL-1 glucose concentration, with a high accuracy of R2 0.95. The maximum growth specific rates (µmax) were 0.141 h-1 obtained at 150 gL-1 glucose concentration with R2 0.91. Optimization of the fermentation parameters such as pH and salinity has been achieved. The highest ethanol yield 0.5637 gg-1 was achieved in a 100% natural seawater-based medium. The maximum ethanol production of 104.04 gL-1 was achieved at pH 4.5 with a specific ethanol rate of 0.1669 gg-1 h-1. The findings of the present study recommend the possibility of ethanol production from a seawater-based medium on a large scale using W. subpelliculosus ZE75.

Identification of (N-aryl-N-arylsulfonyl)aminoacetohydroxamic acids as novel urease inhibitors and the mechanism exploration.

Thirty-three (N-aryl-N-arylsulfonyl)aminoacetohydroxamic acids were synthesized in an effort to develop novel urease inhibitors. Among these compounds, 2-(N-(3-nitrophenyl)-N-(4-tert-butylphenylsulfonyl))aminoacetohydroxamic acid (e2) exhibited excellent inhibitory activity against Helicobacter pylori urease with no perceptible cytotoxicity to mammalian cells. Compound e2 showed over 690-fold higher potency than the clinical used urease inhibitor acetohydroxamic acid, reversibly inhibiting urease with a mixed mechanism. Molecular modeling revealed that (N-aryl-N-arylsulfonyl)aminoacetohydroxamic acids may possibly bind Ni ions and two hydrophobic regions with a 'Y'-like shape.

Trametes versicolor laccase activity modulated by the interaction with gold nanoparticles.

In this study, the impact of gold nanoparticles (AuNPs) on the structure and activity of laccase from Trametes versicolor (Lc) was described. Fluorescence experiments revealed that AuNPs efficiently quench Lc's tryptophan fluorescence by a static and dynamic process. By using differential scanning microcalorimetry and circular dichroism spectroscopy, it was determined how the concentration of nanoparticles and the composition of the medium affected the secondary structure of Lc. The data revealed that upon binding with AuNPs, conformational changes take place mainly in presence of high amounts of nanoparticles. The complex kinetic analysis unveiled the Lc activity enhancement at low concentrations of AuNPs as opposed to the concentrated regime, where it can be reduced by up to 55%. The Michaelis-Menten tests highlighted that the activity of the biocatalyst is closely related to the concentration of AuNPs, while the Selwyn analysis demonstrated that even in a concentrated regime of Lc it is not deactivated regardless of the amount of AuNPs added. The thermal parameters improved by twofold in the presence of low AuNPs concentration, whereas the activation energy increased with AuNPs content, implying that not all collisions are beneficial to the enzyme structure. The effect of AuNPs on the decomposition of a recalcitrant dye (naphthol green B, NG) by Lc was also evaluated, and the Michaelis-Menten model revealed that only the high AuNPs content influenced negatively the Lc activity. The isothermal titration calorimetry revealed that hydrogen bonds are the main intermolecular forces between Lc and AuNPs, while electrostatic interactions are responsible for NG adsorption to AuNPs. The results of the docking analysis show the binding of NG near the copper T1 site of Lc with hydrogen bonds, electrostatic and hydrophobic interactions. The findings of this work provide important knowledge for laccase-based bio-nanoconjugates and their use in the field of environmental remediation.

Coupling of carboxymethyl starch with 2-carboxyethyl acrylate: A new sorbent for the wastewater remediation of methylene blue.

Textile and printing industries play a vital role in the economy of any country. But the effluents of these industries, which contain toxic Methylene Blue (MB) dye when mixed with fresh water, make it unfit for human health and aquatic life. For the removal of MB, different adsorbents were used, but they were expensive, non-biodegradable or less effective. In this research, novel carboxymethyl starch grafted poly 2-carboxyethyl acrylate (CM-St-g-P2CEtA) was synthesized by reacting carboxymethyl starch with 2-carboxyethyl acrylate. The reaction followed a free radical polymerization mechanism. The structure and properties of CM-St-g-P2CEtA were investigated by advanced analytical techniques. The CM-St-g-P2CEtA was employed for the remediation of Methylene Blue (MB) dye from wastewater. The removal percentage (%R) of MB was checked under different parameters, like different pH levels, different initial concentrations of dye, different adsorbent doses, and different contact times. The results obtained during the experiment were subjected to different adsorption and kinetic models. In the kinetic investigation, the experimental results were best represented by the pseudo-second-order kinetic model due to its high R2 value of 0.999. Similarly, with a regression coefficient (R2) value of 0.947, the Langmuir adsorption isotherm was best represented by the experimental results. The Langmuir adsorption model showed that MB dye was adsorbed on the surface of CM-St-g-P2CEtA in a monolayer pattern. The pseudo 2nd order kinetic model suggested that the adsorption process favored chemisorption mechanism. The CM-St-g-P2CEtA showed maximum percentage removal efficiency (%R) of 99.3% for MB dye.

Pharmacokinetic study and the extraction efficiency of bulk and precipitated ibuprofen-imprinted polymer sorbents for gas chromatography and gas chromatography-mass spectrometry ibuprofen bio-analysis.

Bulk and precipitation polymerization methods were used to prepare ibuprofen-molecularly imprinted polymers. Molecularly imprinted polymer-bulk and -precipitation were synthesized in acetonitrile, likewise molecularly imprinted polymer-bulk (mixture) and molecularly imprinted polymer-precipitation (mixture) in a mixture of acetonitrile/toluene (75:25 v/v). N2 adsorption-desorption analysis data revealed that molecularly imprinted polymer-precipitation (mixture) has the highest specific surface area (200.74 m2 /g). The surface chemistry and morphology of the synthesized sorbents were investigated by Fourier-transform infrared analysis and scanning electron microscope micrographs respectively. The prepared sorbents in the mixture of solvents were used in a dispersive solid-phase extraction process for selective extraction and pre-concentration of ibuprofen from urine and human plasma samples. The detection limits were 62.91 and 7.89 ng/ml using molecularly imprinted polymer-bulk (mixture) and molecularly imprinted polymer-precipitation (mixture), respectively. Also, the sorbents showed selective behavior to extract ibuprofen in the presence of naproxen, fenoprofen, and ketoprofen. Overall, the results showed that the precipitation method in the mixture of acetonitrile/toluene resulted in the preparation of a sorbent with the highest extraction efficiency. Furthermore, a pharmacokinetic study was done. The maximum plasma concentration, the time required for maximum plasma concentration, and plasma half-life were 28.95 µg/ml, 2, and 2.39 h, respectively.

Ugi Bis-Amide Derivatives as Tyrosinase Inhibitor; Synthesis, Biology Assessment, and in Silico Analysis.

Herein, a straightforward synthetic strategy mediated by Ugi reaction was developed to synthesize novel series of compounds as tyrosinase inhibitors. The structures of all compounds were confirmed by FT-IR, 1 H-NMR, 13 C-NMR, and CHNOS techniques. The tyrosinase inhibitory activities of all synthesized derivatives 5a-m were determined against mushroom tyrosinase and it was found that derivative 5c possesses the best inhibition with an IC50 value of 69.53±0.042 µM compared to the rest of the synthesized derivatives. Structure-activity relationships (SARs) showed that the presence of 4-MeO or 4-NO2 at the R2 position plays a key role in tyrosinase inhibitory activities. The enzyme kinetics studies showed that compound 5c is an noncompetitive inhibitor. For in silico study, the allosteric site detection was first applied to find the appropriate binding site and then molecular docking and molecular dynamic studies were performed to reveal the position and interactions of 5c as the most potent inhibitor within the tyrosinase active site. The results showed that 5c bind well with the proposed binding site and formed a stable complex with the target protein.

N-Substituted piperidine-3-carbohydrazide-hydrazones against Alzheimer's disease: Synthesis and evaluation of cholinesterase, beta-amyloid inhibitory activity, and antioxidant capacity.

A series of piperidine-3-carbohydrazide-hydrazones bearing phenylethyl, phenylpropyl, and phenylbutyl substituents on piperidine nitrogen were designed and synthesized as cholinesterase (ChE) inhibitors. The title compounds were screened for acetylcholinesterase (AChE), butyrylcholinesterase (BuChE) inhibitory activities and antioxidant capacities, and the active ones for Aß42 self-aggregation inhibition, in vitro. The chemiluminescence method was used to determine the effect of the selected compounds on the reactive oxygen species (ROS) levels in brain tissue. Physicochemical properties were calculated by the MOE program. Kinetic analysis and molecular modeling studies were also carried out for the most active compounds. Generally, the final compounds exhibited moderate to good AChE or BuChE inhibitory activity. Among them, 3g and 3j showed the most potent activity against AChE (IC50 = 4.32 µM) and BuChE (IC50 = 1.27 µM), respectively. The kinetic results showed that both compounds exhibited mixed-type inhibition. Among the selected compounds, nitro derivatives (3g, 4g, and 5g) provided better Aß42 inhibition. According to the chemiluminescence assay, 4i exhibited the most active superoxide free-radical scavenger activity and 3g, 3j, and 4i showed similar scavenger activity on other ROS. All results suggested that 3g, 3j, and 4i have good AChE/BuChE, Aß42 inhibitory potentials and antioxidant capacities and can therefore be suggested as promising multifunctional agents to combat Alzheimer's disease.

A novel green approach for silver recovery from chloride leaching solutions through photodeposition on zinc oxide.

Silver is extensively used in electronics, industrial catalysis, and biomedical sector owing to its enhanced physicochemical properties. E-waste recycling may contribute significantly to enhance silver recovery in the view of a circular economy and limit the depletion of mineral sources. In this scenario, hydrometallurgical routes represent the most widely used techniques for silver extraction/recovery and require strong acidic solutions, high temperatures, and multiple operating units. An alternative sustainable route for silver recovery from leaching solutions used for silver extraction in industrial applications is herein proposed for the first time. The novel green process of silver recovery is based on the UV/vis light-driven photocatalytic deposition of pure metallic silver over low-cost and non-toxic ZnO photocatalyst. In the second step, ZnO is dissolved by slight acidification and pure metallic silver is easily recovered. Low environmental impact, mild operating conditions, and economic viability are among the major perks of the new silver recovery process developed. In the view of a full-scale implementation, several operating conditions of the recovery process (i.e., photocatalyst load, starting silver concentration, type of hole scavenger and irradiation) were thoroughly investigated. A mathematical model capable of describing the system behaviour under different operating conditions was also developed and allowed to estimate unknown kinetic parameters for the Ag-photodeposition process.