Is there a tolerance for extension of the first metatarsal after the Lapidus procedure? A clinical, functional, and hindfoot radiographic analysis.

PURPOSE: Based on the tripod concept of load distribution, our study aimed to evaluate whether a slight extension of first metatarsal (M1) that may occur after the Lapidus procedure (LP) could alter the radiographic measurements of the hindfoot and influence clinical and functional outcomes. METHODS: Twenty-five patients (27 feet) were reviewed. Hindfoot radiographic analysis was based on seven measurements. Clinical and functional outcomes were evaluated with self-reported questionnaires. Transfer metatarsalgia was also assessed. Correlation analysis was performed according to variations of the studied variables. RESULTS: The average extension of the M1 was 4.26 degrees (p < 0.001). None of the hindfoot radiographic measurements changed significantly (p = 0.13, p = 0.50, p = 0.19, p = 0.70, p = 0.11, p = 0.36, p = 0.83). Patients improved on most questionnaires (p < 0.001). None presented transfer metatarsalgia. No correlation between M1 extension and clinical and functional outcomes was found. CONCLUSION: Possibly there is a tolerance of M1 extension in which it does not alter the radiographic measurements of the hindfoot, overload the lesser metatarsals, or compromise clinical and functional outcomes.

The Triplanar Hallux Abducto Valgus Classification System: Is it Valid?

Historically, 2-dimensional radiographic study techniques have been used to classify deformity and guide treatment of hallux valgus deformities in the transverse plane. Recently, a triplanar hallux abducto valgus classification system was proposed. The key elements of this classification system are the pathologic alignments in 3 anatomic planes. The triplanar hallux abducto valgus classification system is intended to clarify the deformity and apply a triplanar anatomic algorithm for treatment. To our knowledge, this classification system has not been validated. Our objective was to assess reliability of the triplanar hallux valgus classification system. Patients with hallux abducto valgus were identified from a foot and ankle registry. Digital radiographs were assembled in a digital slide presentation. The eligibility criteria required complete radiographic studies and represented varying degrees of hallux abducto valgus. The reviewers included 3 board-certified, fellowship-trained orthopedic foot and ankle surgeons. Each reviewer independently classified the hallux abducto valgus deformity for a total of 75 observations. After an 8-week washout period, the order of the hallux abducto valgus cases was randomized in the digital slide presentation and redistributed to the reviewers. The average kappa value from 3 readers was 0.241 with 95% CI (0.093-0.374), indicating a fair agreement. The inter-reader agreement was 0.046 with 95% CI (-0.041 to 0.112), showing poor agreement between readers. Our results indicate the triplanar hallux abducto valgus is not a reliable classification system. While this is the first known triplanar hallux abducto valgus classification system, it lacks prognostic value and reliability.

Operative Time, Cost, and Union Rate of Power Rasp Joint Preparation Versus Traditional Preparation in Arthrodesis of the Foot and Rearfoot.

Time spent in the operating room is valuable to both surgeons and patients. One of the biggest rate-limiting factors when it comes to arthrodesis procedures of the foot and ankle is cartilage removal and joint preparation. Power instrumentation in joint preparation provides an avenue to decrease joint preparation time, thus decreasing operating room time and costs. Arthrodesis of 47 joints (n) from 27 patients were included. Power rasp joint preparation in 26 joints was compared to traditional osteotome and curette joint preparation in 21 joints in both time (seconds), cost (total operating room time cost per minute), and union rate. The overall mean joint preparation time using power rasp for the subtalar joint was 268.3 seconds, talonavicular joint 212.3 seconds, calcaneocuboid joint 142.6 seconds, 1st TMT 107.2 seconds. Mean joint preparation time using traditional method for subtalar joint 509.8 seconds, talonavicular joint 393.0 seconds, calcaneocuboid joint 400.0 seconds, 1st TMT 319.6 seconds. Mean cost of joint preparation using power rasp for subtalar joint $165.47, talonavicular joint $130.89, calcaneocuboid joint $87.94, 1st TMT $66.11. Mean cost of joint preparation using traditional techniques for subtalar joint $314.34, talonavicular joint $242.35, calcaneocuboid joint $246.67, 1st TMT $197.33. Overall union rate was 98% (1 asymptomatic non-union). Increasing efficiency in the operating room is vital to every surgeon's practice. Power rasp joint preparation is a viable option to increase efficiency and decrease operative time, this study shows no statistically significant differences in union rate, with comparable rates to existing literature.

Cannulated screws versus nitinol staple for tarsometatarsal fusion: A cadaveric biomechanical comparison model.

BACKGROUND: The objective of this study was to evaluate the biomechanical stability of a medially placed nitinol staple compared to two crossed-screws in the first TMT-1 joint fusion in a cadaveric cyclic loading model. METHODS: Seven matched pairs (N = 7) of lower limb cadaveric specimens were utilized. TMT-1 joints from each donor were fixed with a medially placed nitinol staple or dorsally placed two 3.5 mm partially threaded cannulated crossed-screws. Specimens were tested in a 4-point bending setting with increasing cyclic forces. RESULTS: The mean plantar gapping was not significantly different between the two groups at any loading stage below 200 N. Specimens fixed with a nitinol staple failed at a mean load of 305 ± 57 N. Conversely, those fixed with crossed-screws failed at 373 ± 86 N. (P = .09). CONCLUSION: There was no statistical difference between a medially placed nitinol staple and dorsally placed crossed-screws in failure loads and plantar gapping under cyclic loads at the TMT-1 joint, however, the staple fixation was much more variable. LEVEL OF EVIDENCE: Level V, basic science study, biomechanics.

Midterm outcomes of the modified Lapidus arthrodesis using the Phantom® Intramedullary Nail System for the treatment of hallux valgus.

BACKGROUND: Lapidus arthrodesis is one of the most commonly used techniques in the correction of moderate and severe hallux valgus. We analyzed the clinical and radiological outcomes after using the Phantom® Lapidus intramedullary nail to find an effective technique with low complications. METHODS: We retrospectively analyzed data of 52 patients who underwent a modified Lapidus arthrodesis with an intramedullary nail at our center from November 2019 to September 2022. The mean follow-up period was 27 (range, 18-34) months. Clinical results were evaluated using the visual analog scale (VAS), the European Foot and Ankle Society score (EFAS) and the American Orthopaedic Foot and Ankle Society score (AOFAS); three different radiological measures were analyzed. RESULTS: The mean AOFAS score increased from 44.8 to 82 points. The mean EFAS score increased from 11.2 to 20.1 points. The mean VAS score decreased by 4.7 points. The mean EFAS Sport score was increased from 9.2 (SD 4.6) to 12.6 (SD 5.4) points. The intermetatarsal angle decreased from 15° to 6.9° and the hallux valgus angle by a mean of 17.9°. The forefoot width reduced from 93.6 to 84.7 mm. All results were statistically significant (p < .001). One case of nonunion was recorded. No implant-related complications were observed. CONCLUSIONS: This device was effective in correcting moderate to severe hallux valgus, with significant patient satisfaction. Its complication rate was not higher than that of other fixation devices. Correct compression of the arthrodesis, absence of extraosseous material, and multidirectional stability are important qualities of this implant for the correct treatment of this pathology. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Early results and complication rate of the LapiCotton procedure in the treatment of medial longitudinal arch collapse: a prospective cohort study.

INTRODUCTION: Instability/collapse of the medial column has been associated with many conditions, particularly progressive collapsing foot deformity (PCFD), hallux valgus (HV), and midfoot arthritis (MA). Restoration of first ray length and sagittal plane alignment to restore the foot tripod is essential when treating these deformities. This study aimed to assess early results, healing, and complication rate of a distraction dorsal opening plantarflexion wedge allograft first tarsometatarsal joint fusion (LapiCotton Procedure) in patients with collapse/instability of the medial column. METHODS: In this prospective cohort study, we included PCFD, HV, and MA patients that underwent a LapiCotton procedure. Fusion site healing was defined by > 50% bone bridging in both interfaces between allograft wedge and host bone using weight-bearing computed tomography (WBCT) after 3 months. First ray collapse radiographic correction and minor and major complications (deep dehiscence, deep infection, and reoperation) were assessed. RESULTS: A total of 22 patients (22 feet) were included (11 PCFD, 6 MA, and 5 of HV patients). Mean follow-up was 5.9 months (range 3-12) and median allograft size was 8 mm (range 5-19 mm). Bone healing was observed in 91% of cases. Two minor complications (9%, both superficial dehiscence) and one major complication (4.5%, deep infection) were observed. Statistically significant improvement of the sagittal plane talus-first metatarsal angle was observed, with mean improvement of 9.4° (95% CI 6.7-12.1°; p < 0.0001). CONCLUSION: In this prospective cohort study of 22 patients treated with the LapiCotton procedure for medial longitudinal arch collapse/instability, we observed a low complication rate (9% minor, 4.5% major), high healing rate after 3 months (91%), one clinically stable radiographic non-union (4.5%) and one unstable non-union (4.5%) needing reoperation. Our results demonstrate promising initial results for LapiCotton technique in treating collapse of the medial longitudinal arch in patients with PCFD, MA and HV deformities. Long-term results are needed to confirm these promising results. LEVEL OF EVIDENCE: Level II, prospective cohort study.

Rates of Lapidus Procedures in the US Military Before and After the Advent of and Advocacy for Tri-Plane Lapidus Corrective Surgery.

Tri-plane corrective Lapidus surgery has been described as advantageous with respect to its anatomic basis and outcomes. Because the procedure has been broadly publicized, changes in overall Lapidus procedure rates due to increased numbers of patients opting for the tri-plane approach could have occurred. Data supporting this possibility appears lacking. We employed official personnel and health records of the total active-duty US military to conduct a retrospective cohort study of Lapidus surgery rates before and after the advent of the tri-plane corrective Lapidus procedure. Least-squares and locally-weighted scatterplot smoother regression functions were used to confirm time trends. Sociodemographic and occupational traits of Lapidus patients were compared using 2-sided t tests and chi square tests. Lapidus surgery rates among hallux valgus patients decreased during 2014 to 2016 and increased during 2017 to 2021. While multiple factors might explain these trends, they coincide with the advent of and advocacy for tri-plane Lapidus surgery. The results support the possibility that its rise influenced overall Lapidus rates in this population. As these findings represent limited evidence of such an influence, further research is required to confirm a causal link. If such a link is found, and if the ongoing research suggests that superior outcomes are associated with tri-plane Lapidus surgery, substantial implications could exist for this population. Benefits might include enhanced medical readiness due to the importance of lower extremity function during military duties. Additional research is needed to confirm the impact of the procedure and to determine whether Lapidus surgery rate patterns in civilian populations mirror these findings.

Correlation Analysis Between Clinical Hypermobility Measurement and Radiographic Parameters of the Hallux Valgus Deformity.

The finding of "hypermobility" has conventionally been considered as a dichotomous categorical variable in both clinical practice and in the literature. In other words, it is defined as being either "present" or "absent" in patients with hallux valgus. Yet it might be far more likely that this represents a continuous variable described by a bell-shaped distribution. Therefore the objective of this investigation was to consider hypermobility as a continuous variable, and to compare the sagittal plane first ray motion to radiographic parameters commonly used in the evaluation of the hallux valgus deformity by means of correlation analyses. The radiographs and measurements of 86 feet were included and measurement of sagittal plane first ray motion was performed with the validated Klaue device. No statistically significant correlation was observed between the total first ray motion with the first intermetatarsal angle (Pearson correlation coefficient 0.106; p = .333), hallux valgus angle (Pearson correlation coefficient -0.106; p = .330), nor sesamoid position (Pearson correlation coefficient 0.155; p = .157). The results of this investigation uniquely consider measurement of hypermobility as a continuous variable, and find no correlation between first ray sagittal plane motion and radiographic parameters associated with the hallux valgus deformity. These results might indicate that although the concept of hypermobility has traditionally been coupled with presentation of the hallux valgus deformity, this might simply represent the result of a historical confirmation bias.

Maintenance of Correction of the Modified Lapidus Procedure With a First Metatarsal to Second Metatarsal Screw With "Spot Weld" Technique: A Retrospective and Radiographic Analysis.

Lapidus first tarsometatarsal (TMT) arthrodesis gained popularity for its ability to correct large deformities especially in cases of medial column instability. Despite solid first TMT fusion, instability between the first and second columns can result in loss of intermetatarsal (IM) angle correction over time. A "spot weld" or fusion between the first and second metatarsal may improve maintenance of correction. This retrospective study reviewed cases of Lapidus arthrodesis with first to second metatarsal base screw fixation for maintenance of IM correction and determine whether a "spot weld" is predictive of maintenance. A total of 90 cases (77 patients) performed by a single surgeon met inclusion with average follow-up of 309 days. First TMT fusion occurred in 87/90 (96.7%) cases with 76 dorsal plate, 10 dorsal staple, and 4 all screws. No incidence of complications related to the 1-2 screw was noted. Mean preoperative IM 1-2 angle 14.90°, mean correction to 6.22° post-operative and final maintained correction at 7.10°, mean loss of correction 0.87°. There were "spot welds" in 65/90 (72.2%) with mean loss of 0.48° versus loss of 1.88° in "no spot weld" subgroup (p < .001). Cases with no spot weld and screw lucency lost 2.25° (p < .001). Loss of IM 1-2 correction can occur due to first and second ray intra-column instability even in cases of solid first TMT arthrodesis. Incorporating a completed "spot weld" with bone grafting and first to second metatarsal screw was found to maintain correction with minimal loss (0.87°).

First Tarsometatarsal Joint Fusion for Hallux Valgus Deformity: A Retrospective Comparison of Two Fixation Constructs Regarding Initial Maintenance of Correction and Complications: Traditional Crossing Screw Fixation Versus Dorsomedial Locking Plate and Intercuneiform Compression Screw.

Various fixation constructs exist to address hallux valgus when performing a first tarsometatarsal joint arthrodesis. The goal of this present study is to compare complication rates, and degree and maintenance of angular correction between a dorsomedial locking plate with intercuneiform compression screw construct versus traditional crossing solid screw fixation construct. The plate plus intercuneiform compression screw construct fixation utilized a combined sagittal saw and curette method of joint preparation while the crossed screw fixation group utilized a curette and bur technique. A retrospective review was conducted of consecutive patients who underwent a midfoot fusion using either constructs. Sixty four total feet in 56 patients were enrolled in the study. Twenty four consecutive patients (32 feet) who underwent a midfoot arthrodesis using the locking plate and intercuneiform fixation were fully fused (100%) by 10 weeks postoperatively, with no incidents of nonunion and one deep vein thrombosis event. Thirty two consecutive patients (32 feet) who underwent midfoot arthrodesis with crossing screw fixation had 2 nonunion events, one that was asymptomatic and the other that required a revision midfoot fusion. There was a statistically significant improvement from the pre-operative intermetatarsal angle, hallux abductus angle compared to the 10 week and 1 year radiographs (p < .05) for the entire cohort for both fixation constructs. There was a statistically significant increase in American College of Foot and Ankle Surgery first ray scores from pre-op to 1 year follow-up for both fixation constructs. Overall, the dorsomedial locking plate plus intercuneiform compression screw fixation construct better maintains Intermetatarsal angle (IMA) correction at midterm follow-up compared to the traditional crossing screw construct. Both cohorts overall demonstrate similar fusion rates at 10 weeks, nonunion events, incidences of broken hardware, hardware removal, deep vein thrombosis, neuritis at 1 year postoperatively, and hallux varus.

A comparative analysis of clinical, functional and radiographic outcomes of patients with and without fusion between the first and second metatarsals after the lapidus procedure.

BACKGROUND: The aim of this study was to compare the clinical, functional and radiographic outcomes in patients who underwent the original Lapidus procedure (OLP) with fusion and undesired non-fusion between the first (M1) and second (M2) metatarsals. METHODS: A retrospective and comparative analysis of 29 patients (38 feet) who underwent the OLP was performed. They were divided in two groups: (1) 23 feet in which fusion occurred and (2) 15 with undesired non-fusion. Clinical and functional data were assessed with the VAS for pain, AOFAS, LEFS and SF-12. SF-12 comprises physical and mental health scales (PCS-12 and MCS-12). Radiographic parameters assessed were bony and soft tissue forefoot widths (BSFW), intermetatarsal-angle (IMA) and HV-angle (HVA). RESULTS: Separately, the groups presented significant improvements in all questionnaires (p < 0.001), except on MCS-12 (fusion p = 0.08 and non-fusion p = 0.27). When comparing both groups, patients with fusion had higher AOFAS scores (p < 0.05). Both groups presented the same improvements on BSFW, IMA and HVA (p = 0.09, p = 0.16, p = 0.52 and p = 0.63). CONCLUSION: Excellent results were observed, even when without fusion between M1 and M2. Patients who evolved with fusion between the M1 and M2 showed greater improvements in the AOFAS score. LEVEL OF EVIDENCE: III, retrospective comparative study.

Impact of forefoot width variation on clinical and functional outcomes following the Lapidus procedure.

PURPOSE: This study aimed to evaluate the effect of variations in bony and soft tissue foot widths on clinical and functional outcomes after hallux valgus correction with the Lapidus procedure. METHODS: Forty-three feet in 35 patients with a mean follow-up of 18.5 months undergoing the LP were reviewed. Clinical and functional data were assessed with the VAS for pain, AOFAS Scale, LEFS and SF-12 health survey, which is divided into physical and mental health composite scales (PCS-12 and MCS-12). Radiographic analysis of forefoot width was based on bony and soft tissue limits. Intermetatarsal-angle and HV-angle were also assessed. RESULTS: Bony width changed significantly from 95.5 mm to 84.2 mm (11.8%) and soft tissue width from 107.12 mm to 100.84 mm (5.86%) (p < 0.001). IMA and HVA improved significantly. Significant clinical and functional improvements were observed, except in MCS-12. In simple linear regression, correlation was found between variations of bony width with Δ-AOFAS and Δ-PCS-12, meaning that as the forefoot narrows, their values increase (p = 0.02 and p = 0.005, respectively). It was also related to Δ-IMA, meaning that the forefoot narrows as these parameters improve (p < 0.001 and p < 0.001). Soft tissue width was related to Δ-PCS-12 and Δ-AIM. In multiple linear regression, the strongest correlation was between bony width variation and Δ-IMA (p = 0.029, r2 = 0.22). CONCLUSION: Forefoot narrowing was correlated with improved clinical and functional outcomes, as measured by AOFAS and PCS-12. In addition, correction of the radiographic parameters, mainly IMA, reflected on a significant decrease in the forefoot width.

Biomechanical evaluation of the proximal chevron osteotomy in comparison to the Lapidus arthrodesis for the correction of hallux valgus deformities.

PURPOSE: The proximal chevron osteotomy and the modified Lapidus arthrodesis are both procedures utilized for deformity correction in patients with severe symptomatic hallux valgus. The aim of the current study was to compare their biomechanical stability when using locking plate fixation. METHODS: Twelve matched pairs of human anatomical lower leg specimens underwent on one side a proximal chevron osteotomy with a medial locking plate and on the other side a modified Lapidus arthrodesis with a plantar locking plate utilizing an interfragmentary compression screw. All specimens underwent bone mineral density (BMD) assessment and were tested in a servohydraulic load frame which applied a load on the centre of the metatarsal head over 1000 loading cycles with subsequently ultimate load testing. Displacement of the proximal and distal bone segment, ultimate load, and bending stiffness were analyzed. RESULTS: Mean displacement of both procedures showed no statistically significant difference throughout all the loading cycles (0.213 ≤ p ≤ 0.834). The mean ultimate load of the proximal chevron osteotomy was 227.9 N (± 232.4) and of the modified Lapidus arthrodesis 162.9 N (± 74.6) (p = 0.754). The proximal chevron osteotomy (38.2 N/mm (± 24.9)) had a significantly higher bending stiffness compared to the modified Lapidus arthrodesis (17.3 N/mm (± 9.9)) (p = 0.009). There was no correlation between BMD and displacement in all loading cycles, ultimate load, and bending stiffness of either procedure (p > 0.05). CONCLUSION: Although the bending stiffness of the chevron osteotomy was higher, there was no statistically significant difference between the surgical techniques in mean displacement and ultimate load. The BMD did not influence the overall stability of either reconstruction. Locking plate fixation increases the clinical value of the modified Lapidus arthrodesis by outweighing most of the biomechanical disadvantages in comparison to the proximal chevron osteotomy.

A Novel Manipulation Technique for Lapidus Fusion in Correction of Hallux Valgus Deformity With Underlying Metatarsus Adductus: A Case Series.

Underlying metatarsus adductus (MA) is commonly seen in patients with hallux valgus (HV) deformity, with implications regarding procedure selection and hallux valgus recurrence. Lapidus, or first tarsometatarsal fusion, is commonly performed allowing reduction in intermetatarsal angle (IMA) but this procedure has not been established as an approach to provide partial correction of MA deformity. Retrospective assessment of preoperative and postoperative metatarsus adductus angle (MAA), IMA and hallux abductus angle (HAA) in patients treated with Lapidus fusion for HV. Significance was determined via paired t test with a p value of <.05. All cases involved manual transverse plane manipulation to reduce both IMA and MAA during screw insertion. Intermetatarsal angle and Engel's angle were measured on preoperative AP radiographs to determine the presence of underlying MA in patients undergoing Lapidus fusion for HV. Ten weeks and 1 year postoperative radiographs were measured to determine degree of correction of IMA, HAA, and MAA. Thirty-four patients met inclusion criteria, which is approximately 46% of our sample population. The average preoperative IMA was 19.4˚ (range 12-32) and the average postoperative IMA was 9.7˚ (range 6-14). The average preoperative Engel's angle was 27.4˚ (range 24-34) and the average postoperative Engel's angle was 22.6˚ (range 15-28) with mean improvement in MA of 6.6˚. Of the 34, 27 (79.4%) patients had a normal Engel's angle at 10 weeks postoperatively. All measures of change met level of significance (p < .05). Of the 34 patients, 21 had radiographs taken beyond the 1 year mark (average 53 weeks). These patients were found to have an average Engel's angle of 23.0˚, which is not statistically significantly different from their 10 week measurements. Of the 21 patients, 17 (81%) maintained normal Engel's angle past 1 year. Metatarsus adductus varies regarding degree of reducibility and complicates preoperative angular measurement and correction of HV. Based on these findings, we recommend Lapidus fusion using this specified manipulation technique to obtain comprehensive transverse plane correction.

First Tarsometatarsal Joint Arthrodesis for Hallux Valgus With and Without Intermetatarsal Screw Fixation: A Comparison of Correction and Maintenance of Correction.

Tarsometatarsal joint arthrodesis is a commonly accepted procedure for hallux valgus associated with severe deformity and first ray hypermobility or medial column instability. This study evaluates the correction of hallux valgus deformity and the maintenance of correction with and without the use of a stabilization screw between the first and second metatarsal bases. Through retrospective review of first tarsometatarsal joint arthrodesis within our institution we evaluated 63 patients. Twenty-seven patients did not have a first to second metatarsal base screw and were placed into the no screw cohort. Thirty-six patients did have a first to second metatarsal base screw and were placed into the screw cohort. This study population had an osseous union rate of 95%. Clinical and radiographic recurrence occurred in 5 of 63 patients (8%). At 1-y postop the measurements demonstrated that the screw cohort had an average intermetatarsal angle correction of 11.6 degrees while the no screw cohort had an average correction of 7.8 degrees. Additionally, at 1-y postop the screw cohort had greater maintenance of the intermetatarsal angle correction with an average change of 0.5 degrees compared to 2.3 degrees in the no screw cohort. We conclude that the addition of the stabilization screw improves the first tarsometatarsal joint arthrodesis construct resulting in a greater degree of realignment and maintenance of correction.

One- and Two-Year Analysis of a Five-Year Prospective Multicenter Study Assessing Radiographic and Patient-Reported Outcomes Following Triplanar First Tarsometatarsal Arthrodesis With Early Weightbearing for Symptomatic Hallux Valgus.

We report one- and 2-year results of a prospective, 5-year, multicenter study of radiographic, clinical, and patient-reported outcomes following triplanar first tarsometatarsal arthrodesis with early weightbearing. One-hundred and seventeen patients were included with a mean (95% confidence interval [CI]) follow-up time of 16.6 (15.5, 17.7) months. Mean (95% CI) time to weightbearing in a boot walker was 7.8 (6.6, 9.1) days, mean time to return to athletic shoes was 45.0 (43.5, 46.6) days, and mean time to return to unrestricted activity was 121.0 (114.5, 127.5) days. There was a significant improvement in radiographic measures with a mean corrective change of -18.0° (-19.6, -16.4) for hallux valgus angle, -8.3° (-8.9, -7.8) for intermetatarsal angle and -2.9 (-3.2, -2.7) for tibial sesamoid position at 12 months (n = 108). Additionally, there was a significant improvement in patient-reported outcomes (Visual Analog Scale, Manchester-Oxford Foot Questionnaire, and Patient-Reported Outcomes Measurement Information System) and changes were maintained at 12 and 24 months postoperatively. There was 1/117 (0.9%) reported recurrence of hallux valgus at 12 months. There were 16/117 (13.7%) subjects who experienced clinical complications of which 10/117 (8.5%) were related to hardware. Of the 7/117 (6.0%) who underwent reoperation, only 1/117 (0.9%) underwent surgery for a nonunion. The results of the interim report of this prospective, multicenter study demonstrate favorable clinical and radiographic improvement of the HV deformity, early return to weightbearing, low recurrence, and low rate of complications.

The influence of concomitant hammertoe correction on postoperative outcomes in patients undergoing hallux valgus correction.

BACKGROUND: Patients with hallux valgus often develop secondary hammertoe deformities of the lesser toes. Operative management of bunions with hammertoe can be more extensive; however, it is unclear whether this affects patient-reported outcomes. The aim of this study was to compare postoperative patient-reported outcome measures and radiographic outcomes between patients who underwent isolated bunion correction and patients who underwent simultaneous bunion and hammertoe correction. METHODS: Preoperative, postoperative, and change in Patient-Reported Outcomes Measurement Information System (PROMIS) scores were compared between patients who underwent isolated hallux valgus correction and those who underwent concomitant hammertoe correction. Radiographic measures including hallux valgus angle (HVA), intermetatarsal angle (IMA), distal metatarsal-articular angle (DMAA), and Meary's angle were also compared. Targeted minimum-loss estimation (TMLE) was used for statistical analysis to control for confounders. RESULTS: A total of 221 feet (134 isolated bunion correction, 87 concomitant hammertoe correction) with a minimum of 12 months follow-up were included in this study. Both cohorts demonstrated significant improvements in the physical function, pain interference, pain intensity, and global physical health PROMIS domains (all p < 0.001). However, patients in the concomitant hammertoe cohort had significantly less improvements in pain interference and pain intensity (p < 0.01, p < 0.05 respectively). The concomitant hammertoe cohort also had significantly higher postoperative pain interference scores than the isolated bunion cohort (p < 0.01). Radiographic outcomes did not differ between the two groups. CONCLUSION: While both isolated bunion correction and concomitant hammertoe correction yielded clinically significant improvements in patient reported outcomes and normalized radiographic parameters, patients undergoing simultaneous bunion and hammertoe correction experienced substantially less improvement in postoperative pain-related outcomes than those who underwent isolated bunion correction.

Correlation of first metatarsal sagittal alignment with clinical and functional outcomes following the Lapidus procedure.

BACKGROUND: The purpose of this study was to evaluate the effect of the variation of the first metatarsal (M1) sagittal alignment after the Lapidus procedure (LP) on clinical and functional outcomes, and transfer metatarsalgia. METHODS: Twenty-nine patients who underwent a LP, with a mean follow-up of 20 months, were reviewed. Radiographic, clinical and functional measurements were compared. Clinical and functional questionnaires applied were the visual analogue scale (VAS), American Orthopaedic Foot and Ankle Society (AOFAS) scale, lower extremity functional scale (LEFS) and SF-12, which is divided in physical (PCS-12) and mental-health (MCS-12) scales. Radiographic analysis of M1 sagittal alignment was based on the first metatarsal declination angle (FMDA) and Meary Angle (MA). Intermetatarsal angle (IMA) and hallux valgus angle (HVA) were also measured. RESULTS: FMDA, IMA and HVA showed significant variation, but MA did not. Clinical and functional improvements were observed, except in MCS-12. No patient developed transfer metatarsalgia. A direct correlation was found between Δ-FMDA with Δ-PCS-12 and Δ-LEFS, meaning that excessive M1 dorsiflexion as measured by FMDA led to a decrease in PCS-12 and LEFS. Patients with Δ-FMDA of up to 3.2° of dorsiflexion were those who had significant improvements. CONCLUSION: Dorsiflexion of M1 can lead to decreased outcomes as measured by PCS-12 and LEFS. However, satisfactory outcomes can be obtained even with some dorsal deviation of the M1. LEVEL OF EVIDENCE: IV, retrospective case series.

Can we correct first metatarsal rotation and sesamoid position with the 3D Lapidus procedure?

OBJECTIVE: We examine the technique and radiographic outcomes obtained with triplanar first tarsometatarsal arthrodesis (3D Lapidus) for the surgical correction of hallux valgus (HV). This procedure, apart from correcting angular deformity 1st-2nd intermetatarsal angle, HV angle, etc., is specifically intended to act on first ray pronation and place the sesamoids in their normal position, to alleviate the metatarsalgia often occurring in HV before and after surgery, possibly caused by their abnormal position. This study aims to examine the radiographic outcomes of the 3D Lapidus procedure. MATERIALS AND METHODS: Retrospective study of 37 feet operated on from April 2019 to December 2019, with a minimum 1-year follow-up (mean 420 days), using the 3D Lapidus procedure. Radiographic outcomes were evaluated. RESULTS: The intermetatarsal angle decreased from a mean value of 16.42° to 5.62° (p < 0.0001). The HV angle decreased from a mean value of 32.12° to 8.05° (p < 0.0001). The preoperative first metatarsocuneiform angle, with a mean value of 21.86°, was null after arthrodesis (p < 0.0001). The tibial sesamoid position, according to the Hardy and Clapham classification, decreased from a mean value of 4.84 to 1.27 after surgery, within normality (p < 0.0001). DISCUSSION: Correction of the deformity in a single plane is generally insufficient. It is necessary to act on the three planes of space to correct the deformity, obtain good outcomes, and avoid recurrence. CONCLUSIONS: Radiographic outcomes of triplanar correction with the 3D Lapidus procedure are excellent, achieving statistically significant differences in all parameters studied.

Is first metatarsal shortening correlated with clinical and functional outcomes following the Lapidus procedure?

OBJECTIVE: To correlate first metatarsal (M1) shortening with transfer metatarsalgia, and clinical and functional outcomes in patients who underwent the Lapidus procedure (LP). MATERIALS AND METHODS: A retrospective review of 29 patients who were submitted to the LP for HV correction. The average follow-up was 20 months. M1 length was analyzed using the Relative First Metatarsal Length (RML) measurement. Intermetatarsal angle (IMA) and hallux valgus angle (HVA) were also measured. Clinical and functional analyses were based on the visual analogue scale (VAS), Lower Extremity Functional Scale (LEFS), and Short-form 12 (SF-12) health survey. SF-12 is divided into physical (PCS-12) and mental health (MCS-12) composite scales. Transfer metatarsalgia was diagnosed by the clinical exam. Radiographic, clinical, and functional outcomes were compared using paired Wilcoxon's and Student's t tests. Inter-observer reliability of RML measures was calculated using Intraclass Correlation Coefficients (ICC). The correlation between RML and the clinical and functional questionnaires was assessed with the Spearman's Rho test. RESULTS: There was a significant M1 shortening of 2.3 mm (p < 0.05), with mean preoperative RML of 3 mm and mean post-operative of 5.3 mm. None of the patients evolved with transfer metatarsalgia. ICC of the RML measures presented excellent reliability. IMA and HVA showed improvements (p < 0.05). Clinical and functional improvements were observed in all questionnaires applied, except in the MCS-12. In the linear regression, RML was inversely correlated to LEFS (p < 0.05), which means that LEFS scores increased as RML measurements decreased. CONCLUSION: The present study demonstrated that M1 shortening led to a decreased LEFS following the LP.