RESUMO
A key challenge for sensor miniaturization is to create electrodes with smaller footprints, while maintaining or increasing sensitivity. In this work, the electroactive surface of gold electrodes was enhanced 30-fold by wrinkling followed by chronoamperometric (CA) pulsing. Electron microscopy showed increased surface roughness in response to an increased number of CA pulses. The nanoroughened electrodes also showed excellent fouling resistance when submerged in solutions containing bovine serum albumin. The nanoroughened electrodes were used for electrochemical detection of Cu2+ in tap water and of glucose in human blood plasma. In the latter case, the nanoroughened electrodes allowed highly sensitive enzyme-free sensing of glucose, with responses comparable to those of two commercial enzyme-based sensors. We anticipate that this methodology to fabricate nanostructured electrodes can accelerate the development of simple, cost-effective, and high sensitivity electrochemical platforms.
Assuntos
Técnicas Biossensoriais , Nanoestruturas , Humanos , Ouro , Técnicas Eletroquímicas/métodos , Glucose , Eletrodos , Técnicas Biossensoriais/métodosRESUMO
Paper has emerged as an excellent alternative to create environmentally benign disposable electrochemical sensing devices. The critical step to fabricating electrochemical sensors is making paper conductive. In this work, paper-based electrodes with a high electroactive surface area (ESA) were fabricated using a simple electroless deposition technique. The polymerization time of a polydopamine adhesion layer and the gold salt concentration during the electroless deposition step were optimized to obtain uniformly conductive paper-based electrodes. The optimization of these fabrication parameters was key to obtaining the highest ESA possible. Roughening factors (Rf) of 7.2 and 2.3 were obtained when cyclic voltammetry was done in sulfuric acid and potassium ferricyanide, respectively, demonstrating a surface prone to fast electron transfer. As a proof of concept, mercury detection was done through anodic stripping, achieving a limit of quantification (LOQ) of 0.9 ppb. By changing the metal deposition conditions, the roughness of the metalized papers could also be tuned for their use as surface-enhanced Raman scattering (SERS) sensors. Metallized papers with the highest SERS signal for thiophenol detection yielded a LOQ of 10 ppb. We anticipate that this method of fabricating nanostructured paper-based electrodes can accelerate the development of simple, cost-effective, and highly sensitive electrochemical and SERS sensing platforms.
RESUMO
Surface nanostructures of silicon nanomembranes (SiNMs) play a dominant role in modulating their energy band structures and trapping surface charges, thus strongly affecting the Schottky barrier height, the surface resistance, and the optoelectronic response of Schottky-contacted SiNMs. Here, controllable nanoroughening of SiNMs without substantial changes in thickness was realized via a metal-masked chemical-etching approach. The mechanism of surface roughness effect on the electrical characteristics and contact properties of SiNM-based diodes and thin-film transistors was investigated. Meanwhile, photodetective devices were fabricated by utilizing rough SiNMs, and significant dark current suppressions were demonstrated due to surface depletion and Schottky barrier modulations. Moreover, by introducing a three-terminal device structure (adding a gate), the photoresponse could be further enhanced with high current on/off ratio. Our work may provide guidance for creating and designing principles of SiNM-based optoelectronic devices, especially for Schottky barrier modulations.