RESUMO
Benzobicyclo[3.2.1]octane is a cage-like unique motif containing a bicyclo[3.2.1]octane structure fused with at least one benzene ring. It is found in various natural products that exhibit structural complexities and important biological activities. The total synthesis of natural products possessing this challenging structure has received considerable attention, and great advances have been made in this field during the past 15â years. This review summarizes thus far achieved chemical syntheses and synthetic studies of natural compounds featuring the benzobicyclo[3.2.1]octane core. It focuses on strategic approaches constructing the bridged structure, aiming to provide a useful reference for inspiring further advancements in strategies and total syntheses of natural products with such a framework.
RESUMO
Fuel fraud has proliferated due to underlying economic advantage in nearly every nation. For the purpose of detecting adulteration and providing real-time quality assurance, non-destructive oil analysis is crucial. This paper reports the simple approach for fingerprinting undiluted petroleum products including gasoline from various brands, diesel, and kerosene oil in comparison with organic solvents using synchronous fluorescence spectroscopy and hierarchical cluster analysis. Fluorescence-based successful detection of adulterated samples is demonstrated in imported RON 92 gasoline, synthetically adulterated with kerosene oil (KO) in proportions up to 70%. Compared to gasoline, kerosene oil has a lower relative poly aromatic hydrocarbons, as the amount of kerosene oil (KO) increases, the KO peak at 352 nm rises, but the gasoline's peak intensity decreases in the range of 371-500 nm. It is noteworthy that imported fuel grades RON 92 and RON 95 are comparable to each other and surprisingly clustered with RON 91 from the Attock refinery presenting concerns about quality. Similarly, the Shell website mentions that Shell V-Power is RON 99 but interestingly it clusters with retail fuel samples acquired from PSO filling stations and PSO RON 95 showing disagreement with the claim that the fuel is high octane. Another use for this technique in oil exploration was the detection of adulterants and successfully spotted methanol, ethanol, and kerosene oil in the tainted samples. These findings suggest SFS as an accurate, and low-cost testing tool for gasoline fingerprinting and contamination screening.
RESUMO
The norcembranoid and cembranoid diterpenoids represent an intriguing class of natural products isolated from marine sources. Their chemical synthesis has been a challenging and exciting field of research over the past two decades, owing largely to their structural complexity. We recently disclosed a total synthesis of a member of this class, ineleganolide, in a 23 step longest linear sequence. In search of a shorter, more efficient route, we have devised a new strategy for the synthesis of a key bicyclic enone. Disclosed herein is our improved synthesis of this strained intermediate, completing the formal synthesis of ineleganolide in only 14 steps, thereby shortening our previous synthesis by 9 steps. Dedicated to Prof. Thomas Maimone on his receipt of the Tetrahedron Young Investigator Award 2024.
RESUMO
Over the past few years, there has been a surge of interest in the chemistry of bicyclobutanes (BCBs). Although BCBs have been used to synthesize bicyclo[2.1.1]hexanes and bicyclo[3.1.1]heptanes, the synthesis of bicyclo[4.1.1]octanes has remained elusive. Herein, we report the first Lewis acid-catalyzed unexpected (4+3) annulation of para-quinonemethides (p-QMs) with BCBs allowing the synthesis of oxabicyclo[4.1.1]octanes proceeding under mild conditions. With 5 mol % of Bi(OTf)3, the reaction afforded the (4+3) annulated product in high regioselectivity and good functional group compatibility via a simultaneous Lewis acid activation of BCBs and p-QMs. The reaction is likely initiated by the 1,6-addition of Lewis acid activated BCBs to p-QMs followed by the C2-selective intramolecular addition of the phenol moiety to the generated cyclobutyl cation intermediate. Moreover, detailed mechanistic studies provided insight into the mechanism of the reaction.
RESUMO
The improvement of the Total Isomerization Process (TIP) for the production of high-quality gasoline with the ultimate goal of reaching a Research Octane Number (RON) higher than 92 requires the use of specific sorbents to separate pentane and hexane isomers into classes of linear, mono- and di-branched isomers. Herein we report the design of a new multi-cage microporous Fe(III)-MOF (referred to as MIP-214, MIP stands for materials of the Institute of Porous Materials of Paris) with a flu-e topology, incorporating an asymmetric heterofunctional ditopic ligand, 4-pyrazolecarboxylic acid, that exhibits an appropriate microporous structure for a thermodynamic-controlled separation of hydrocarbon isomers. This MOF produced via a direct, scalable, and mild synthesis route was proven to encompass a unique separation of C5/C6 isomers by classes of low RON over high RON alkanes with a sorption hierarchy: (n-hexaneâ«n-pentane≈2-methylpentane>3-methylpentane)low RONâ«(2,3-dimethylbutane≈i-pentane≈2,2-dimethylbutane)high RON following the adsorption enthalpy sequence. We reveal for the first time that a single sorbent can efficiently separate such a complex mixture of high RON di-branched hexane and mono-branched pentane isomers from their low RON counterparts, which is a major achievement reported so far.
RESUMO
A small set of twelve compounds of a nitrofuran carboxamide chemotype was elaborated from a readily available 2,6-diazaspiro[3.4]octane building block, exploring diverse variants of the molecular periphery, including various azole substituents. The in vitro inhibitory activities of the synthesized compounds were assessed against Mycobacterium tuberculosis H37Rv. As a result, a remarkably potent antitubercular lead displaying a minimal inhibitory concentration of 0.016 µg/mL was identified.
Assuntos
Mycobacterium tuberculosis , Nitrofuranos , Octanos , Relação Estrutura-Atividade , Antituberculosos/farmacologia , Nitrofuranos/farmacologia , Testes de Sensibilidade MicrobianaRESUMO
In this work, electrocatalytic upgrade of n-valeraldehyde to octane with higher activity and selectivity is achieved over Au single-atom catalysts (SACs)-NiMn2 O4 spinel synergetic composites. Experiments combined with density functional theory calculation collaboratively demonstrate that Au single-atoms occupy surface Ni2+ vacancies of NiMn2 O4 , which play a dominant role in n-valeraldehyde selective oxidation. A detailed investigation reveals that the initial n-valeraldehyde molecule preferentially adsorbs on the Mn tetrahedral site of NiMn2 O4 spinel synergetic structures, and the subsequent n-valeraldehyde molecule easily adsorbs on the Ni site. Specifically, Au single-atom surficial derivation over spinel lowers the adsorption energy (Eads ) of the initial n-valeraldehyde molecule, which will facilitate its adsorption on the Mn site of Au SACs-NiMn2 O4 . Furthermore, the single-atom Au surficial derivation not only alters the electronic structure of Au SACs-NiMn2 O4 but also lower the Eads of subsequent n-valeraldehyde molecule. Hence, the subsequent n-valeraldehyde molecules prefer adsorption on Au sites rather than Ni sites, and the process of two alkyl radicals originating from Mn-C4 H9 and Au-C4 H9 dimerization into an octane is accordingly accelerated. This work will provide an avenue for the rational design of SACs and supply a vital mechanism for understanding the electrocatalytic upgrade of n-valeraldehyde to octane.
Assuntos
Óxido de Magnésio , Octanos , Aldeídos , Óxido de Alumínio , CatáliseRESUMO
The κ opioid receptor (KOR) is one of the promising targets to develop analgesics lacking morphine like side effects. To seek a novel KOR agonist we designed 6-amide derivatives with an oxabicyclo[3.2.1]octane structure based on a proposed active conformation of a selective KOR agonist nalfurafine. All the synthesized compounds strongly bound to the KOR and some compound showed KOR selectivities. 6R-Amides were more potent and efficacious KOR agonists than the corresponding 6S-isomers. However, most 6-amide derivatives were partial KOR agonist. Conformational analyses of 6R- and 6S-amide derivatives and nalfurafine well accounted for the difference of KOR agonistic activities between two diastereomers. Surprisingly, the tested N-H amides were full δ opioid receptor (DOR) agonists. Among the tested compounds 7a with benzamide moiety was the most potent dual DOR/KOR agonist. On the other hand, 6S-phenylacetamide 8b was potent full DOR agonist with less efficacious agonist activity for the µ receptor and KOR. 6-Amide derivatives with an oxabicyclo[3.2.1]octane structure were expected to be a promising fundamental skeleton for the dual DOR/KOR agonists and/or selective DOR agonists.
Assuntos
Analgésicos/farmacologia , Morfinanos/farmacologia , Receptores Opioides delta/agonistas , Receptores Opioides kappa/agonistas , Analgésicos/síntese química , Analgésicos/química , Relação Dose-Resposta a Droga , Humanos , Estrutura Molecular , Morfinanos/síntese química , Morfinanos/química , Relação Estrutura-AtividadeRESUMO
The Research Octane Number (RON) is a key quality parameter for gasoline, obtained offline through complex, time-consuming, and expensive standard methods. Measurements are usually only available a few times per week and after long delays, making process control very challenging. Therefore, alternative methods have been proposed to predict RON from readily available data. In this work, we report the development of inferential models for predicting RON from process data collected in a real catalytic reforming process. Data resolution and synchronization were explicitly considered during the modelling stage, where 20 predictive linear and non-linear machine learning models were assessed and compared using a robust Monte Carlo double cross-validation approach. The workflow also handles outliers, missing data, multirate and multiresolution observations, and processes dynamics, among other features. Low RMSE were obtained under testing conditions (close to 0.5), with the best methods belonging to the class of penalized regression methods and partial least squares. The developed models allow for improved management of the operational conditions necessary to achieve the target RON, including a more effective use of the heating utilities, which improves process efficiency while reducing costs and emissions.
Assuntos
Gasolina , Octanos , Análise dos Mínimos Quadrados , Aprendizado de MáquinaRESUMO
The separation of alkanes, particularly monobranched and dibranched isomers, is of paramount importance in the petrochemical industry for optimizing the feedstock of ethylene production as well as for upgrading the octane number of gasoline. Here, we report the full separation of linear/monobranched alkanes from their dibranched isomers by a robust and easily scalable metal-organic framework material, Co3 (HCOO)6 . The compound completely excludes dibranched alkanes but adsorbs their linear and monobranched isomers, as evidenced by single-component and multicomponent adsorption measurements. More importantly, the material exhibits excellent performance in separating naphtha and is capable of providing high quality feedstock for the production of ethylene and gasoline components with high octane number, making it a promising candidate for naphtha separation in petrochemical industry.
RESUMO
Diquinane or bicyclo[3.3.0]octane is a conspicuous structural unit existing in the carbo-frameworks of a wide range of natural products such as alkaloids and terpenoids. These diquinane-containing molecules not merely exhibit intriguing architectures, but also showcase a broad spectrum of significant bioactivities, which draw widespread attention from the global synthetic community. During the past decade, with an aim to accomplish the total syntheses of such specified cornucopias of natural products, a variety of elegant strategies for construction of the diquinane ring system have been disclosed. In this Minireview, the achievements on this subject in the timeline from 2010 to June 2020 are demonstrated and it is discussed how the diquinane unit is strategically forged in the context of the specific target structure. In addition, impacts of the selected works to the field of natural product total synthesis is highlighted and the particular outlook of diquinane-containing natural product synthesis is provided.
RESUMO
As an important advanced oxidation technology for environmental purification, photocatalytic degradation has received extensive attention. Designing and synthesizing a catalyst with high-intensity photocatalytic performance is a very challenging subject. Herein, one polydentate cation was synthesized by 1,4-diazabicyclo[2.2.2]octane (DABCO) and 1, 4-bis (bromomethyl) benzene. Inorganic-organic hybrid compounds 1, 2 were synthesized by hydrothermal and room temperature volatilization with inorganic metal salts, namely, {[L1]0.5·[Cu2Br4]0.5}n (1), {[L1]·[Cu2I4]·CH3CN}n (2). Under visible light, compounds 1 and 2 were investigated for their degradation effects on tetracycline (TC) in water. The experimental results showed that compounds 1 and 2 with appropriate concentration of H2O2 had obvious photocatalytic degradation effect on TC. In addition, the influencing factors of photocatalysis such as the amount of adsorbent, the initial concentration of TC and the different pH value were investigated. The photocatalyst exhibits good stability and cyclability.
Assuntos
Peróxido de Hidrogênio , Tetraciclina , Catálise , Luz , PiperazinasRESUMO
Rhodojaponin III is a grayanane-type diterpenoid natural product with a novel chemical scaffold. It shows potent antinociceptive activity and may represent a new class of natural non-opioid analgesics with a novel mode of action. We explored the Au(I)-catalyzed Conia-ene cyclization and the Mn(III)-mediated radical cyclization of alkynyl ketones for the synthesis of the bicyclo[3.2.1]octane fragment of rhodojaponin III. These strategies will be applicable in the synthesis of rhodojaponin III and analogs for future biological studies.
RESUMO
Gasoline is one of the most important distillate fuels obtained from crude refining; it is mainly used as an automotive fuel to propel spark-ignited (SI) engines. It is a complex hydrocarbon fuel that is known to possess several hundred individual molecules of varying sizes and chemical classes. These large numbers of individual molecules can be assembled into a finite set of molecular moieties or functional groups that can independently represent the chemical composition. Identification and quantification of groups enables the prediction of many fuel properties that otherwise may be difficult and expensive to measure experimentally. In the present work, high resolution 1H nuclear magnetic resonance (NMR) spectroscopy, an advanced structure elucidation technique, was employed for the molecular characterization of a gasoline sample in order to analyze the functional groups. The chemical composition of the gasoline sample was then expressed using six hydrocarbon functional groups, as follows: paraffinic groups (CH, CH2 and CH3), naphthenic CH-CH2 groups and aromatic C-CH groups. The obtained functional groups were then used to predict a number of fuel properties, including research octane number (RON), motor octane number (MON), derived cetane number (DCN), threshold sooting index (TSI) and yield sooting index (YSI).
RESUMO
The contamination of the environment by crude oil and its by-products, mainly composed of aliphatic and aromatic hydrocarbons, is a widespread problem. Biodegradation by bacteria is one of the processes responsible for the removal of these pollutants. This study was conducted to determine the abilities of Burkholderia sp. B5, Cupriavidus sp. B1, Pseudomonas sp. T1, and another Cupriavidus sp. X5 to degrade binary mixtures of octane (representing aliphatic hydrocarbons) with benzene, toluene, ethylbenzene, or xylene (BTEX as aromatic hydrocarbons) at a final concentration of 100 ppm under aerobic conditions. These strains were isolated from an enriched bacterial consortium (Yabase or Y consortium) that prefer to degrade aromatic hydrocarbon over aliphatic hydrocarbons. We found that B5 degraded all BTEX compounds more rapidly than octane. In contrast, B1, T1 and X5 utilized more of octane over BTX compounds. B5 also preferred to use benzene over octane with varying concentrations of up to 200 mg/l. B5 possesses alkane hydroxylase (alkB) and catechol 2,3-dioxygenase (C23D) genes, which are responsible for the degradation of alkanes and aromatic hydrocarbons, respectively. This study strongly supports our notion that Burkholderia played a key role in the preferential degradation of aromatic hydrocarbons over aliphatic hydrocarbons in the previously characterized Y consortium. The preferential degradation of more toxic aromatic hydrocarbons over aliphatics is crucial in risk-based bioremediation.
Assuntos
Burkholderia/metabolismo , Cupriavidus/metabolismo , Hidrocarbonetos Aromáticos/metabolismo , Octanos/metabolismo , Pseudomonas/metabolismo , Técnicas de Tipagem Bacteriana , Benzeno/metabolismo , Derivados de Benzeno/metabolismo , Biodegradação Ambiental , Burkholderia/classificação , Burkholderia/genética , Catecol 2,3-Dioxigenase/genética , Cupriavidus/classificação , Cupriavidus/genética , Citocromo P-450 CYP4A/genética , DNA Bacteriano , Microbiologia Ambiental , Poluentes Ambientais/metabolismo , Campos de Petróleo e Gás/microbiologia , Petróleo/microbiologia , Pseudomonas/classificação , Pseudomonas/genética , RNA Ribossômico 16S , Tolueno/metabolismo , Xilenos/metabolismoRESUMO
Cyclobutenone has been used as a highly reactive dienophile in Diels-Alder reactions, however, no enantioselective example has been reported. We disclose herein a chiral oxazaborolidine-aluminum bromide catalyzed enantioselective Diels-Alder reaction of 3-alkoxycarbonyl cyclobutenone with a variety of dienes. Furthermore, a total synthesis of (-)-kingianinâ F was completed for the first time via enantioenriched cycloadduct bicyclo[4.2.0]octane derivative.
RESUMO
This review deals with the historical development of all N-F fluorinating agents developed so far. The unique properties of fluorine make fluorinated organic compounds attractive in many research areas and therefore fluorinating agents are important. N-F agents have proven useful by virtue of their easy handling. This reagent class includes many types of N-F compounds: perfluoro-N-fluoropiperidine, N-fluoro-2-pyridone, N-fluoro-N-alkylarenesulfonamides, N-fluoropyridinium salts and derivatives, N-fluoroquinuclidium salts, N-fluoro-trifluoromethanesulfonimide, N-fluoro-sultams, N-fluoro-benzothiazole dioxides, N-fluoro-lactams, N-fluoro-o-benzenedisulfonimide, N-fluoro-benzenesulfonimide, 1-alkyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane salts, N-fluoropyridinium-2-sulfonate derivatives, 1-fluoro-4-hydroxy-1,4-diazoniabicyclo[2.2.2]octane salts, N-fluorodinitroimidazole, N-fluoro-trichloro-1,3,5-triazinium salt, N-F ethano-Tröger's base derivatives, N-fluoro-methanesulfonimide, N-fluoro-N-arylarenesulfonamides, bisN-F salts such as N,N'-difluorobipyridinium salts and N,N'-difluoro-1,4-diazoniabicyclo[2.2.2]octane salts, and their many derivatives and analogs, including chiral N-F reagents such as optically active N-fluoro-sultam derivatives, N-fluoro-alkaloid derivatives, DABCO-based N-F derivatives, and N-F binaphthyldisulfonimides. The synthesis and reactions of these reagents are described chronologically and the review also discusses the relative fluorination power of each reagent and their mechanisms chronicling developments from a historical perspective.
RESUMO
With the burgeoning interest in cage motifs for bioactive molecule discovery, and the recent disclosure of 1,4-cubane-dicarboxylic acid impact sensitivity, more research into the safety profiles of cage scaffolds is required. Therefore, the impact sensitivity and thermal decomposition behavior of judiciously selected starting materials and synthetic intermediates of cubane, bicyclo[1.1.1]pentane (BCP), and bicyclo[2.2.2]octane (BCO) were evaluated via hammer test and sealed cell differential scanning calorimetry, respectively. Iodo-substituted systems were found to be more impact sensitive, whereas hydroxymethyl substitution led to more rapid thermodecomposition. Cubane was more likely to be impact sensitive with these substituents, followed by BCP, whereas all BCOs were unresponsive. The majority of derivatives were placed substantially above Yoshida thresholds-a computational indicator of sensitivity.
RESUMO
BACKGROUND: To evaluate the feasibility of a surgical technique using a sub-perfluoro-n-octane (PFO) injection of ocular viscoelastic device (OVD) to stabilize inverted internal limiting membrane (ILM) flap for the treatment of macular hole retinal detachment (MHRD). METHODS: This study was a retrospective, consecutive, interventional case series. Patients who underwent MHRD surgery with sub-PFO injection of OVD to stabilize inverted ILM flap onto the macular hole (MH) were reviewed. The color fundus and optical coherence tomography (OCT) images were collected and evaluated. The best-corrected visual acuity (BCVA) before and after surgery were compared as the functional outcome. RESULTS: The study included 8 eyes of 8 consecutive patients (mean age: 61.8 ± 7.1 years; mean follow-up period: 9.0 ± 2.5 months). All eyes (100%) achieved successful MH closure; 7 eyes (87.5%) demonstrated complete retinal reattachment, and 1 eye (12.5%) had minimal residual subretinal fluid parafoveally. Of the 8 patients, 7 patients (87.5%) had achieved improvement in BCVA after the primary surgery, whereas 1 eye remained stable. The average BCVA before and after the surgery at the last visit improved from 20/843 (1.63 ± 0.48 logMAR) to 20/200 (1.00 ± 0.39 logMAR) (P = 0.016). Anatomically, near-normal foveal contour was noted in five (62.5%) eyes at the final follow-up. CONCLUSIONS: The use of sub-PFO injection of OVD in MHRD surgery could stabilize inverted ILM flaps, achieve good anatomical results and improve postoperative BCVA.
Assuntos
Membrana Basal/cirurgia , Tamponamento Interno/métodos , Membrana Epirretiniana/cirurgia , Fluorocarbonos/administração & dosagem , Descolamento Retiniano/cirurgia , Perfurações Retinianas/cirurgia , Retalhos Cirúrgicos , Idoso , Idoso de 80 Anos ou mais , Membrana Basal/diagnóstico por imagem , Membrana Basal/fisiopatologia , Membrana Epirretiniana/diagnóstico por imagem , Membrana Epirretiniana/fisiopatologia , Feminino , Seguimentos , Humanos , Injeções Intravítreas , Masculino , Pessoa de Meia-Idade , Descolamento Retiniano/diagnóstico por imagem , Descolamento Retiniano/fisiopatologia , Perfurações Retinianas/diagnóstico por imagem , Perfurações Retinianas/fisiopatologia , Estudos Retrospectivos , Tomografia de Coerência Óptica , Acuidade Visual/fisiologia , VitrectomiaRESUMO
Perfluorocarbon liquids (PFCLs) have been considered safe for intraocular manipulation of the retina, but since 2013 many cases of acute eye toxicity cousing blindness have been reported in various countries when using various commercial PFCLs. All these PFCLs were CE marked (Conformité Européenne), which meant they had been subjected to evaluation complying with the International Organization for Standardization (ISO) guidelines. These dramatic events raised questions about the safety of PFCLs and the validity of some cytotoxicity tests performed under ISO guidelines. Samples from toxic batches were analyzed by gas chromatography-mass spectrometry combined with Raman and infrared spectrometry. Perfluorooctanoic acid, dodecafluoro-1-heptanol, ethylbenzene and tributyltin bromide were identified and evaluated by a direct contact cytotoxicity test using ARPE-19â¯cell line, patented by our group (EP 3467118 A1). Perfluorooctanoic acid at a concentration of >0.06â¯mM and tributyltin bromide at a concentration of ≥0.016â¯mM were shown to be toxic, whereas the concentration found in the toxic samples reached 0.48â¯mM, and 0.111â¯mM, respectively. These finding emphasized the idea that determination of partially fluorinated compounds are not enough to guarantee the safety of these medical devices.