Cryo-EM Structure and Assembly of an Extracellular Contractile Injection System.

Contractile injection systems (CISs) are cell-puncturing nanodevices that share ancestry with contractile tail bacteriophages. Photorhabdus virulence cassette (PVC) represents one group of extracellular CISs that are present in both bacteria and archaea. Here, we report the cryo-EM structure of an intact PVC from P. asymbiotica. This over 10-MDa device resembles a simplified T4 phage tail, containing a hexagonal baseplate complex with six fibers and a capped 117-nanometer sheath-tube trunk. One distinct feature of the PVC is the presence of three variants for both tube and sheath proteins, indicating a functional specialization of them during evolution. The terminal hexameric cap docks onto the topmost layer of the inner tube and locks the outer sheath in pre-contraction state with six stretching arms. Our results on the PVC provide a framework for understanding the general mechanism of widespread CISs and pave the way for using them as delivery tools in biological or therapeutic applications.

Plant ESCRT protein ALIX coordinates with retromer complex in regulating receptor-mediated sorting of soluble vacuolar proteins.

Vacuolar proteins play essential roles in plant physiology and development, but the factors and the machinery regulating their vesicle trafficking through the endomembrane compartments remain largely unknown. We and others have recently identified an evolutionarily conserved plant endosomal sorting complex required for transport (ESCRT)-associated protein apoptosis-linked gene-2 interacting protein X (ALIX), which plays canonical functions in the biogenesis of the multivesicular body/prevacuolar compartment (MVB/PVC) and in the sorting of ubiquitinated membrane proteins. In this study, we elucidate the roles and underlying mechanism of ALIX in regulating vacuolar transport of soluble proteins, beyond its conventional ESCRT function in eukaryotic cells. We show that ALIX colocalizes and physically interacts with the retromer core subunits Vps26 and Vps29 in planta. Moreover, double-mutant analysis reveals the genetic interaction of ALIX with Vps26 and Vps29 for regulating trafficking of soluble vacuolar proteins. Interestingly, depletion of ALIX perturbs membrane recruitment of Vps26 and Vps29 and alters the endosomal localization of vacuolar sorting receptors (VSRs). Taken together, ALIX functions as a unique retromer core subcomplex regulator by orchestrating receptor-mediated vacuolar sorting of soluble proteins.

Partial volume correction in longitudinal tau PET studies: is it really needed?

BACKGROUND: [18F]flortaucipir (FTP) tau PET quantification is known to be affected by non-specific binding in off-target regions. Although partial volume correction (PVC) techniques partially account for this effect, their inclusion may also introduce noise and variability into the quantification process. While the impact of these effects has been studied in cross-sectional designs, the benefits and drawbacks of PVC on longitudinal FTP studies is still under scrutiny. The aim of this work was to study the performance of the most common PVC techniques for longitudinal FTP imaging. METHODS: A cohort of 247 individuals from the Alzheimer's Disease Neuroimaging Initiative with concurrent baseline FTP-PET, amyloid-beta (Aß) PET and structural MRI, as well as with follow-up FTP-PET and MRI were included in the study. FTP-PET scans were corrected for partial volume effects using Meltzer's, a simple and popular analytical PVC, and both the region-based voxel-wise (RBV) and the iterative Yang (iY) corrections. FTP SUVR values and their longitudinal rates of change were calculated for regions of interest (ROI) corresponding to Braak Areas I-VI, for a temporal meta-ROI and for regions typically displaying off-target FTP binding (caudate, putamen, pallidum, thalamus, choroid plexus, hemispheric white matter, cerebellar white matter, and cerebrospinal fluid). The longitudinal correlation between binding in off-target and target ROIs was analysed for the different PVCs. Additionally, group differences in longitudinal FTP SUVR rates of change between Aß-negative (A-) and Aß-positive (A+), and between cognitively unimpaired (CU) and cognitively impaired (CI) individuals, were studied. Finally, we compared the ability of different partial-volume-corrected baseline FTP SUVRs to predict longitudinal brain atrophy and cognitive decline. RESULTS: Among off-target ROIs, hemispheric white matter showed the highest correlation with longitudinal FTP SUVR rates from cortical target ROIs (R2=0.28-0.82), with CSF coming in second (R2=0.28-0.42). Application of voxel-wise PVC techniques minimized this correlation, with RBV performing best (R2=0.00-0.07 for hemispheric white matter). PVC also increased group differences between CU and CI individuals in FTP SUVR rates of change across all target regions, with RBV again performing best (No PVC: Cohen's d = 0.26-0.66; RBV: Cohen's d = 0.43-0.74). These improvements were not observed for differentiating A- from A+ groups. Additionally, voxel-wise PVC techniques strengthened the correlation between baseline FTP SUVR and longitudinal grey matter atrophy and cognitive decline. CONCLUSION: Quantification of longitudinal FTP SUVR rates of change is affected by signal from off-target regions, especially the hemispheric white matter and the CSF. Voxel-wise PVC techniques significantly reduce this effect. PVC provided a significant but modest benefit for tasks involving the measurement of group-level longitudinal differences. These findings are particularly relevant for the estimations of sample sizes and analysis methodologies of longitudinal group studies.

Predictors and possible mechanisms of premature ventricular contraction induced cardiomyopathy.

Premature ventricular complexes (PVCs) are encountered frequently in clinical practice. While PVCs may have various causes, a small number of individuals with PVCs develop cardiomyopathy in the absence of other potential etiologies. When correctly identified, patients with PVC-incuded cardiomyopathy can have dramatic improvement of their cardiomyopathy with treatment of their PVCs. In this focused review, we discuss potential predictors of PVC-induced cardiomyopathy, including PVC frequency, PVC characteristics, and modifiable patient risk factors. We also review some proposed mechanisms of PVC-induced cardiomyopathy and conclude with future directions for research and clinical practice.

Poly(vinyl chloride) Dechlorination Catalyzed by Zirconium.

Poly(vinyl chloride) undergoes dechlorination in the presence of triethylsilane (Et3SiH) and a catalytic amount of [Cp2Zr(NPh2)][CH3B(C6F5)3] (1 b) at 40-80 °C, with up to 91 % efficiency. Stoichiometric reactivity studies conducted on cyclohexyl chloride as a model suggest that 1 b dechlorinates PVC by initial chloride abstraction, followed by hydride transfer to the cationic PVC chain from Et3SiH. Consumer items such as pipe fitting, vinyl disc or electric cable insulation undergo either dechlorination or hydrosilylation of the carbonyl-containing copolymer (polyvinyl acetate) or plasticizer (phthalate).

Effect of Biofilm Forming on the Migration of Di(2-ethylhexyl)phthalate from PVC Plastics.

Plastic additives, represented by plasticizers, are important components of plastic pollution. Biofilms inevitably form on plastic surfaces when plastic enters the aqueous environment. However, little is known about the effect of biofilms on plastic surfaces on the release of additives therein. In this study, PVC plastics with different levels of di(2-ethylhexyl)phthalate (DEHP) content were investigated to study the effect of biofilm growth on DEHP release. The presence of biofilms promoted the migration of DEHP from PVC plastics to the external environment. Relative to biofilm-free controls, although the presence of surface biofilm resulted in 0.8 to 11.6 times lower DEHP concentrations in water, the concentrations of the degradation product, monoethylhexyl phthalate (MEHP) in water, were 2.3 to 57.3 times higher. When the total release amounts of DEHP in the biofilm and in the water were combined, they were increased by 0.6-73 times after biofilm growth. However, most of the released DEHP was adsorbed in the biofilms and was subsequently degraded. The results of this study suggest that the biofilm as a new interface between plastics and the surrounding environment can affect the transport and transformation of plastic additives in the environment through barrier, adsorption, and degradation. Future research endeavors should aim to explore the transport dynamics and fate of plastic additives under various biofilm compositions as well as evaluate the ecological risks associated with their enrichment by biofilms.

Chemiluminescence sensing for Hg2+ in environment water using carbon materials from PVC dechlorination as signal initiator.

Chemiluminescence (CL) sensing with good performance remains a challenge. The utilization of secondary residues from polyvinyl chloride (PVC) treatment is the key to improve PVC recycling rate. Herein, dechlorinated carbon materials from PVC/iron scrap co-treatment in subcritical water were used as CL sensing element. It was found that tiny changes in the spatial structure of aptamer could cause huge changes in CL signal of the residue-luminol system. A CL biosensor was constructed for mercury in environment water for the first time. The detection limit was estimated to be 0.37 pM. High sensitivity was mainly due to strong CL triggering and signal amplification from residues and effective regulating residue activity by aptamer space dimension. For real water samples, the results by residue CL analysis were consistent with that by cold vapor atom adsorption spectroscopy (CVAAS). Most strikingly, the used material was secondary residues from the treatment of PVC waste, which reduced the time and energy consumption of CL sensing. This research proposed the approach for routine monitoring mercury in environment but also provided the reference for developing other environmentally beneficial analysis platforms.

Hydrophilic catheters for intermittent catheterization and occurrence of urinary tract infections. A retrospective comparative study in patients with spinal cord Injury.

BACKGROUND: Neurogenic bladder dysfunction is a major problem for spinal cord injury (SCI) patients not only due to the risk of serious complications but also because of the impact on quality of life. The main aim of this study is to compare the rate of urinary tract infection (UTI) associated with hydrophilic-coated catheters versus uncoated polyvinyl chloride (PVC) catheters among SCI patients presenting with functional neurogenic bladder sphincter disorders. METHODOLOGY: This was a retrospective cohort study from 2005 to 2020 including adult male or female patients who have an SCI at least more than 1 month ago with neurogenic bladder dysfunction and were using intermittent catheterization (single-use hydrophilic-coated or the standard-of-care polyvinyl chloride uncoated standard catheters) at least 3 times a day to maintain bladder emptying. RESULTS: A total of 1000 patients were selected and recruited through a stratified random sampling technique with 467 (47.60%) patients in the uncoated catheter arm and 524 (52.60%) in the coated catheter groups. The three outcome measures, namely: symptomatic UTI, Bacteriuria, and pyuria were significantly higher in the group using uncoated polyvinyl chloride (PVC) catheters compared to hydrophilic-coated catheters at the rate of 79.60% vs.46.60%, 81.10% vs. 64.69, and 53.57% versus 41.79% respectively. Males, elder patients, longer duration, and severity of SCI were associated with increased risk of symptomatic UTI. CONCLUSIONS: The results indicate a beneficial effect regarding clinical UTI when using hydrophilic-coated catheters in terms of fewer cases of symptomatic UTI. Bacteriuria is inevitable in patients with long-term catheterization, however, treatment should not be started unless the clinical symptoms exist. More attention should be given to the high-risk group for symptomatic UTIs.

Biodegradation of PVCs through in-vitro identification of Bacillus albus and computational pathway analysis of ABH enzyme.

Microplastics pose significant challenges to ecosystems and organisms. They can be ingested by marine and terrestrial species, leading to potential health risks and ecological disruptions. This study aims to address the urgent need for effective remediation strategies by focusing on the biodegradation of microplastics, specifically polyvinyl chloride (PVC) derivatives, using the bacterial strain Bacillus albus. The study provides a comprehensive background on the accumulation of noxious substances in the environment and the importance of harnessing biodegradation as an eco-friendly method for pollutant elimination. The specific objective is to investigate the enzymatic capabilities of Bacillus albus, particularly the alpha/beta hydrolases (ABH), in degrading microplastics. To achieve this, in-silico studies were conducted, including analysis of the ABH protein sequence and its interaction with potential inhibitors targeting PVC derivatives. Docking scores of - 7.2 kcal/mol were obtained to evaluate the efficacy of the interactions. The study demonstrates the promising bioremediation prospects of Bacillus albus for microplastics, highlighting its potential as a key player in addressing microplastic pollution. The findings underscore the urgent need for further experimental validation and practical implementation of Bacillus albus in environmental remediation strategies.

Analysis of the gut microbiome associated to PVC biodegradation in yellow mealworms.

The potential of invertebrates in the biodegradation of plastic polymers such as polyvinyl chloride (PVC) is receiving increasing attention. The present study is aimed to identify the gut microbiome involved in this degradation in yellow mealworms, i.e., the larvae of Tenebrio molitor Linnaeus. The egested PVC polymer experienced a dramatic reduction in both number average molecular weight (Mn) and weight average molecular weight (Mw) of 99.3% and 99.6%, respectively, whereas FTIR analysis revealed chemical alterations. Mass spectrometry analysis identified two potential degradation products: phthalic acid, di(2-propylpentyl) ester and 2-Propenoic acid, tridecyl ester. Further, we used metagenomic sequencing to elucidate the response of the gut microbiome when transitioning from bran to PVC as a food source, identifying four microorganisms actively involved in PVC degradation. Additionally, metagenomic functional analysis of the gut microbiome identified 111 key gene modules that were significantly enriched. In summary, our findings suggest that yellow mealworms adapt to PVC degradation by modifying their gut microbiome both structurally and functionally.

Poly(vinyl chloride)/Nanocarbon Composites for Advanced Potentiometric Membrane Sensor Design.

Polymer nanocomposites filled with carbon nanoparticles (CNPs) are a hot topic in materials science. This article discusses the current research on the use of these materials as interfacial electron transfer films for solid contact potentiometric membrane sensors (SC-PMSs). The results of a comparative study of plasticized poly (vinyl chloride) (pPVC) matrices modified with single-walled carbon nanotubes (SWCNTs), fullerenes-C60, and their hybrid ensemble (SWCNTs-C60) are reported. The morphological characteristics and electrical conductivity of the prepared nanostructured composite films are reported. It was found that the specific electrical conductivity of the pPVC/SWCNTs-C60 polymer film was higher than that of pPVC filled with individual nanocomponents. The effectiveness of this composite material as an electron transfer film in a new potentiometric membrane sensor for detecting phenylpyruvic acid (in anionic form) was demonstrated. Screening for this metabolic product of phenylalanine in body fluids is of significant diagnostic interest in phenylketonuria (dementia), viral hepatitis, and alcoholism. The developed sensor showed a stable and fast Nernstian response for phenylpyruvate ions in aqueous solutions over the wide linear concentration range of 5 × 10-7-1 × 10-3 M, with a detection limit of 10-7.2 M.

Multiscale Carbon Fibre-Carbon Nanotube Composites of Poly(Vinyl Chloride)-An Evaluation of Their Properties and Structure.

To date, there has been limited information in the literature on the application of carbon fibre-carbon nanotube systems for the modification of poly(vinyl chloride) (PVC) matrixes by micro- and nanometric fillers and an evaluation of the properties of the unique materials produced. This paper presents the results of newly designed unique multiscale composites. The advantages of the simultaneous use of carbon fibres (CFs) and carbon nanotubes (CNTs) in PVC modification are discussed. To increase the dispersibility of the nanofiller, CFs together with nanotubes were subjected to a sonication process. The resulting material was introduced into PVC blends, which were processed by extrusion. The ratio of components in the hybrid filler with CF_CNT was 20:1, and its proportion in the PVC matrix was 1, 5, and 10 wt.%, respectively. Comparatively, PVC composites modified only with carbon fibres were obtained. The structure, thermal, electrical, and mechanical properties and swelling resistance of the composites were studied. The study showed a favourable homogeneous dispersion of nanotubes in the PVC matrix. This enabled effective modification of the structure at the nanometric level and the formation of an interpenetrating network of well-dispersed hybrid filler, as evidenced by a decrease in volume resistivity and improvement in swelling resistance, as well as an increase in glass transition temperature in the case of PVC/CF_CNT composites.

Transplantation of soil from organic field confers disease suppressive ability to conducive soil.

Organic agriculture is a sustainable method of farming, and confers disease-suppressing abilities to disease-conducive soils via specialized soil microbiomes. This study aimed at transforming a disease-conducive soil from a conventional field into disease-suppressive soil by inoculating soil from an organic field previously established as "disease-suppressive". The effectiveness of the transformed soil was established with the model plant wheat (Triticum aestivum) grown under natural conditions, with regard to its potential in inhibiting fungal phytopathogens, Rhizoctonia solani and Fusarium oxysporum. The conducive soil inoculated with the disease-suppressive soil performed better than the control conducive soil in terms of reduced disease severity in plants, improved soil nutrient content, increased activity of hydrolytic enzymes, and increased abundance of structural and functional microbial markers. The study demonstrates the efficacy of the soil microbiome under long-term organic agriculture in transforming disease-conducive soil into disease-suppressive soils. Such practises are simple and easy to implement, and could greatly improve the sustainability and crop yield in developing countries.

Comprehensive investigation of recycled PVC powder.

This study constitutes a comprehensive investigation centred on comprehending the behaviour and characteristics of recycled polyvinyl chloride (PVC) powders. The overarching objective is to successfully conclude the initial research phase, during which PVC-coated fabric offcuts undergo a transformation into PVC powder while achieving complete separation from polyethylene terephthalate fibres. The study entails a qualitative description of the morphology of PVC powder particles, employing an optical microscope to distinguish the diverse shapes exhibited by these particles. The optical microscope observations of PVC powder reveal a distinct array of non-spherical particles characterized by flat, elongated shapes. These high-magnification images unveil the intricate morphological features of the particles, highlighting their irregular shapes. Subsequently, a quantitative analysis of PVC particle size distribution is performed, comparing results from optical microscopy with those obtained through mechanical sieving. The qualitative and quantitative findings obtained provide robust evidence supporting the correlation and confirm that most particles are smaller than 600 µm (93.6%) using an optical microscope and the sieving process (96.39%). The greatest fraction (83.44%) is in the size range between 200 and 600 µm. Assessing flowability, another significant aspect in the evaluation of powders, provides insights into its behaviour and interparticle interactions. The flowability results indicate a Compressibility Index of approximately 26.84%, which suggests poor flowability. This means that the powder is likely to encounter difficulties in flowing freely. This finding is in line with the Hausner ratio, which measures 1.37. This investigation of recycled PVC powder will offer insights into the potential applications and processing considerations of this powder. More concretely, the use of recycled PVC powder shows promise as a viable alternative to conventional PVC resin in plastisol formulations, offering the potential to maintain the properties of the final PVC product without adverse effects.

Idiopathic ventricular fibrillation associated with long-coupled Purkinje ectopy.

INTRODUCTION: Idiopathic ventricular fibrillation (IVF) is mainly associated with and triggered by short-coupled (R-on-T) ventricular ectopics. However, little is known about the risk of VF associated with long-coupled premature ventricular complexes (LCPVCs). OBJECTIVE: To examine the prevalence and characteristics of IVF patients presenting with LCPVCs. METHODS: Consecutive patients with IVF and PVCs from five arrhythmia referral centers were reviewed. We included patients presenting LCPVCs, defined as PVCs falling after the end of the T wave, with a normal QTc interval. We evaluated demographics, medical history, and clinical circumstances associated with PVCs and VF episodes. The origin of PVCs was determined by invasive mapping. RESULTS: Seventy-nine patients with IVF were reviewed. Among them, 12 (15.2%) met the inclusion criteria (8 women, age 36 ± 14 years). Eleven patients had documented LCPVCs initiating repetitive PVCs or sustained VF, whereas 1 had only documented isolated PVCs. In 10 of 12 patients, PVCs were recorded showing both long and short coupling intervals of 418 ± 46 and 304 ± 33 ms, respectively. Mapping showed that PVCs originated from the left Purkinje in 10 patients, from the right Purkinje in 1 patient, and both in 1 patient. Compared to other patients from the initial cohort, IVF with LCPVCs was associated with a left-sided origin of PVCs (92% in long-coupled IVF vs. 46% of left Purkinje PVCs in short-coupled IVF, p = .004). CONCLUSION: Long-coupled fascicular PVCs, traditionally recognized as benign, can be associated with IVF in a subset of patients. They can induce IVF by themselves or in association with short-coupled PVCs.

Best ablation strategy in patients with premature ventricular contractions with multiple morphology: a single-centre experience.

AIMS: This study aimed to examine the clinical benefits of targeted ablation of all Premature ventricular complex (PVC) morphologies vs. predominant PVC only. METHODS AND RESULTS: A total of 171 consecutive patients with reduced left ventricular ejection fraction (LVEF) and ≥2 PVC morphology with high burden (>10%/day) undergoing their first ablation procedure were included in the analysis. At the initial procedure, prevalent PVC alone was ablated in the majority. However, at the redo, all PVC morphologies were targeted for ablation. : At the first procedure, 152 (89%) patients received ablation of the dominant PVC only. In the remaining 19 (11%) patients, all PVC morphologies were ablated. At two years, high PVC burden was detected in 89 (52%) patients. Repeat procedure was performed in 78 of 89, where all PVC morphologies were ablated. At 5 years after the repeat procedure, 71 (91%) had PVC burden of <5% [3.8 ± 1.1% vs. 15.4 ± 4.3% in successful vs. failed subjects (P < 0.001)]. In patients with low PVC burden after the initial procedure, LVEF improved from 37.5% to 41.6% [mean difference (MD): 3.39 ± 2.9%, P < 0.001], whereas a reduction in LVEF from 39.8% to 34.5% (MD: 6.45 ± 4.7%, P < 0.001) was recorded in patients with high PVC burden. One year after the repeat procedure, LVEF improved from 36.2% to 41.7% (MD: 5.5 ± 4.3%, P < 0.001) in patients with successful ablation. CONCLUSION: In this observational series, ablation of all PVC morphologies was associated with significantly lower PVC burden and improvement of LVEF at long-term follow-up, compared with ablation of the dominant morphology only.

Health Risks Posed by Dermal and Inhalation Exposure to High Concentrations of Chlorinated Paraffins Found in Soft Poly(vinyl chloride) Curtains.

Chlorinated paraffins (CPs) are used in many products, including soft poly(vinyl chloride) curtains, which are used in many indoor environments. Health hazards posed by CPs in curtains are poorly understood. Here, chamber tests and an indoor fugacity model were used to predict CP emissions from soft poly(vinyl chloride) curtains, and dermal uptake through direct contact was assessed using surface wipes. Short-chain and medium-chain CPs accounted for 30% by weight of the curtains. Evaporation drives CP migration, like for other semivolatile organic plasticizers, at room temperature. The CP emission rate to air was 7.09 ng/(cm2 h), and the estimated short-chain and medium-chain CP concentrations were 583 and 95.3 ng/m3 in indoor air 21.2 and 172 µg/g in dust, respectively. Curtains could be important indoor sources of CPs to dust and air. The calculated total daily CP intakes from air and dust were 165 ng/(kg day) for an adult and 514 ng/(kg day) for a toddler, and an assessment of dermal intake through direct contact indicated that touching just once could increase intake by 274 µg. The results indicated that curtains, which are common in houses, could pose considerable health risks through inhalation of and dermal contact with CPs.

Microplastic pollution in the sediments of interconnected lakebed, seabed, and seashore aquatic environments: polymer-specific total mass through the multianalytical "PISA" procedure.

The total mass of individual synthetic polymers present as microplastic (MP < 2 mm) pollutants in the sediments of interconnected aquatic environments was determined adopting the Polymer Identification and Specific Analysis (PISA) procedure. The investigated area includes a coastal lakebed (Massaciuccoli), a coastal seabed (Serchio River estuarine), and a sandy beach (Lecciona), all within a natural park area in Tuscany (Italy). Polyolefins, poly(styrene) (PS), poly(vinyl chloride) (PVC), polycarbonate (PC), poly(ethylene terephthalate) (PET), and the polyamides poly(caprolactame) (Nylon 6) and poly(hexamethylene adipamide) (Nylon 6,6) were fractionated and quantified through a sequence of selective solvent extractions followed by either analytical pyrolysis or reversed-phase HPLC analysis of the products of hydrolytic depolymerizations under acidic and alkaline conditions. The highest concentrations of polyolefins (highly degraded, up to 864 µg/kg of dry sediment) and PS (up to 1138 µg/kg) MPs were found in the beach dune sector, where larger plastic debris are not removed by the cyclic swash action and are thus prone to further aging and fragmentation. Surprisingly, low concentrations of less degraded polyolefins (around 30 µg/kg) were found throughout the transect zones of the beach. Positive correlation was found between polar polymers (PVC, PC) and phthalates, most likely absorbed from polluted environments. PET and nylons above their respective LOQ values were found in the lakebed and estuarine seabed hot spots. The pollution levels suggest a significant contribution from riverine and canalized surface waters collecting urban (treated) wastewaters and waters from Serchio River and the much larger Arno River aquifers, characterized by a high anthropogenic pressure.

Evaluation of shields and ventilation as a countermeasure to protect bus drivers from infection.

We evaluated the deposition of droplets and droplet nuclei-generated by simulated coughing and talking from three points in a bus-on the driver's face and on surfaces around the driver (e.g., the steering wheel), based on whether countermeasures were taken, and assuming that an infected passenger was talking to the driver. When a shield, such as acrylic boards or polyvinyl chloride (PVC) sheets, was used as the countermeasure, the deposition of artificial droplets (>4 µm), emitted from beside or behind the driver, on his eyes, mouth, and cheeks reduced by two to three orders of magnitude or more. Deposition on the surfaces around the driver was also reduced following the use of shields. For artificial droplet nuclei (1.3 µm of polystyrene latex (PSL)) emitted from atomizers beside the driver, the operation of the ventilation fan (VF) and air conditioner (AC), and defroster (DEF) greatly reduced the driver's exposure, while the use of the shield did not. The infection risk of the driver was estimated through exposure to the virus via transfer to the mucosa via hands or surface-to-finger, direct adhesion on the mucosa, and direct inhalation of droplets and droplet nuclei. This is under the assumption that the droplets and droplet nuclei measured in this study are 40% the diameter of those after immediately leaving the mouth of the infected person and are constant regardless of particle size. When using the shield, total infection risk via droplet, airborne, and contact transmission was decreased by 75.0-99.8%. When the shield was not installed, the infection risk decreased by 9.74-48.7% with the operation of the VF, AC, and/or DEF.

Inactivation of Cronobacter sakazakii biofilms using high voltage atmospheric cold plasma on various food-contact surfaces-a preliminary study.

Cronobacter sakazakii is an opportunistic foodborne pathogen in powdered infant formula (PIF) associated with several foodborne outbreaks. Biofilms of C. sakazakii in the PIF manufacturing plant may be a source of contamination, but information on the treatment of these biofilms is limited. This study investigated the inactivation of C. sakazakii biofilms on three food contact surfaces (stainless steel, silicone, and PVC) using high voltage atmospheric cold plasma (HVACP) applied as a dielectric barrier discharge in a 10:90 air: helium modified atmosphere. After the 90 s  of cold plasma exposure at 40 kV, C. sakazakii was reduced by ∼3 log CFU/coupon comparing to without cold plasma treatments. HVACP treatment caused cell shrinkage, fragmentation of the cell membrane, and leakage of cytoplasm. The inactivation of the cells on the surface was confirmed by live/dead staining. These above-mentioned results indicate the antibiofilm efficacy of HVACP on C. sakazakii isolates on various food contact surfaces.