In situ fabrication of atomically adjacent dual-vacancy sites for nearly 100% selective CH4 production.

The photocatalytic CO2-to-CH4 conversion involves multiple consecutive proton-electron coupling transfer processes. Achieving high CH4 selectivity with satisfactory conversion efficiency remains challenging since the inefficient proton and electron delivery path results in sluggish proton-electron transfer kinetics. Herein, we propose the fabrication of atomically adjacent anion-cation vacancy as paired redox active sites that could maximally promote the proton- and electron-donating efficiency to simultaneously enhance the oxidation and reduction half-reactions, achieving higher photocatalytic CO2 reduction activity and CH4 selectivity. Taking TiO2 as a photocatalyst prototype, the operando electron paramagnetic resonance spectra, quasi in situ X-ray photoelectron spectroscopy measurements, and high-angle annular dark-field-scanning transmission electron microscopy image analysis prove that the VTi on TiO2 as initial sites can induce electron redistribution and facilitate the escape of the adjacent oxygen atom, thereby triggering the dynamic creation of atomically adjacent dual-vacancy sites during photocatalytic reactions. The dual-vacancy sites not only promote the proton- and electron-donating efficiency for CO2 activation and protonation but also modulate the coordination modes of surface-bound intermediate species, thus converting the endoergic protonation step to an exoergic reaction process and steering the CO2 reduction pathway toward CH4 production. As a result, these in situ created dual active sites enable nearly 100% CH4 selectivity and evolution rate of 19.4 µmol g-1 h-1, about 80 times higher than that of pristine TiO2. Thus, these insights into vacancy dynamics and structure-function relationship are valuable to atomic understanding and catalyst design for achieving highly selective catalysis.

Femtosecond Laser Fabrication of Three-Dimensional Bubble-Propelled Microrotors for Multicomponent Mechanical Transmission.

Inspired by the reverse thrust generated by fuel injection, micromachines that are self-propelled by bubble ejection are developed, such as microrods, microtubes, and microspheres. However, controlling bubble ejection sites to build micromachines with programmable actuation and further enabling mechanical transmission remain challenging. Here, bubble-propelled mechanical microsystems are constructed by proposing a multimaterial femtosecond laser processing method, consisting of direct laser writing and selective laser metal reduction. The polymer frame of the microsystems is first printed, followed by the deposition of catalytic platinum into the desired local site of the microsystems by laser reduction. With this method, a variety of designable microrotors with selective bubble ejection sites are realized, which enable excellent mechanical transmission systems composed of single and multiple mechanical components, including a coupler, a crank slider, and a crank rocker system. We believe the presented bubble-propelled mechanical microsystems could be extended to applications in microrobotics, microfluidics, and microsensors.

Selective Photoreduction of CO2 to CH4 Triggered by Metal-Vacancy Pair Sites.

Selectively achieving the photoreduction of carbon dioxide (CO2) to methane (CH4) remains a significant challenge, which primarily arises from the complexity of the protonation process. In this work, we designed metal-vacancy pair sites in defective metal oxide semiconductors, which anchor the reactive intermediates with a bridged linkage for the selective protonation to produce CH4. As an example, oxygen-deficient Nb2O5 nanosheets are synthesized, in which the niobium-oxygen vacancy pair sites are demonstrated by X-ray photoelectron spectroscopy and electron paramagnetic resonance spectra. In situ Fourier transform infrared spectroscopy monitors the *CH3O intermediate, a key intermediate for CH4 production, during the CO2 photoreduction in oxygen-deficient Nb2O5 nanosheets. Importantly, the built metal-vacancy pair sites regulate the *CH3O formation step as a spontaneous process, making the reduction of CO2 to CH4 the preferred method. Therefore, the oxygen-deficient Nb2O5 nanosheets exhibit a CH4 formation rate of 19.14 µmol g-1 h-1, with an electron selectivity of ∼94.1%.

Nitrogen Doping-Roused Synergistic Active Sites in Perovskite Enabling Highly Selective CO2 Photoreduction into CH4.

The intricate protonation process in carbon dioxide reduction usually makes the product unpredictable. Thus, it is significant to control the reactive intermediates to manipulate the reaction steps. Here, we propose that the synergistic La-Ti active sites in the N-La2Ti2O7 nanosheets enable the highly selective carbon dioxide photoreduction into methane. In the photoreduction of CO2 over N-La2Ti2O7 nanosheets, in situ Fourier transform infrared spectra are utilized to monitor the *CH3O intermediate, pivotal for methane production, whereas such monitoring is not conducted for La2Ti2O7 nanosheets. Also, theoretical calculations testify to the increased charge densities on the Ti and La atoms and the regulated formation energy barrier of *CO and *CH3O intermediates by the constructed synergistic active sites. Accordingly, the methane formation rate of 7.97 µL h-1 exhibited by the N-La2Ti2O7 nanosheets, along with an electron selectivity of 96.6%, exceeds that of most previously reported catalysts under similar conditions.

Synthetic Leaves Based on Crystalline Olefin-Linked Covalent Organic Frameworks for Efficient CO2 Photoreduction with Water.

We report, for the first time, a new synthetic strategy for the preparation of crystalline two-dimensional olefin-linked covalent organic frameworks (COFs) based on aldol condensation between benzodifurandione and aromatic aldehydes. Olefin-linked COFs can be facilely crystallized through either a pyridine-promoted solvothermal process or a benzoic anhydride-mediated organic flux synthesis. The resultant COF leaf with high in-plane π-conjugation exhibits efficient visible-light-driven photoreduction of carbon dioxide (CO2) with water (H2O) in the absence of any photosensitizer, sacrificial agents, or cocatalysts. The production rate of carbon monoxide (CO) reaches as high as 158.1 µmol g-1 h-1 with near 100% CO selectivity, which is accompanied by the oxidation of H2O to oxygen. Both theoretical and experimental results confirm that the key lies in achieving exceptional photoinduced charge separation and low exciton binding. We anticipate that our findings will facilitate new possibilities for the development of semiconducting COFs with structural diversity and functional variability.

Synthesis of Double Trivalent Perovskite Quantum Dots Cs3BiSbX9 (X = Cl, Br, I) for Efficient CO2 Photoreduction Performance.

Non-toxic Bi halides have great potential in the field of CO2 photoreduction, but strong charge localization limits their charge separation and transfer. In this study, a series of Cs3BiSbX9 (X = Cl, Br, I) perovskite quantum dots (PQDs) are synthesized by antisolvent recrystallization at room temperature, in which Cs3BiSbBr9 PQDs has high selectivity (94.51%) and yield (15.32 µmol g-1 h-1) of CO2 to CO. In situ DRIFTS and theoretical calculations suggest that the surface charge can be tailored by halogen modulation, allowing for the customization of intermediate species. The Bi─Br─Sb symmetric charge distribution induced by the halogen Br promotes the formation of b─HCOO and reduces the reaction energy barrier of the rate-limiting step, while the weak electronegativity of Cl and the high electronegativity of I leads to m─HCOO and ─COOH production, which are detrimental to CO generation. This work provides new insights into the design of halide alloy perovskites for CO2 photoreduction.

Single-Atom Electron Pumps Over Transition Metal Chalcogenides Boosting Photocatalysis.

Cocatalyst is of paramount significance to provide fruitful active sites for suppressing the spatial charge recombination toward boosted photocatalysis. Up to date, exploration of robust and stable cocatalysts is remained challenging. Inspired by the intrinsic merits of single-atom catalysts (SACs), such as distinctive electronic structure and high atomic utilization efficiency, single-atom/transition metal chalcogenides (TMCs) is utilized as a model to synthesize CdS-Pd single-atom catalyst (CdS-PdSA) heterostructures. This demonstrates the precise anchoring of isolated metal single-atom catalysts (SACs) onto TMCs through a simple yet effective wet-chemical strategy. The resulting heterostructures exhibit significantly enhanced and stable photocatalytic activity for selective anaerobic organic transformations and hydrogen production under visible light. This enhancement is primarily inferred due to the role of Pd SACs as electron pumps, which directionally trap the electrons photoexcited over CdS, accelerating the spatial charge separation and prolonging the carrier lifespan. The charge transport route and photocatalytic mechanism are elucidated. This work underscores the potential of SACs as cocatalysts in heterogeneous photocatalysis, offering valuable insights for the rational design of atomic-level cocatalysts for solar-to-chemical energy conversion and beyond.

2D Atomic Layers for CO2 Photoreduction.

Artificial photosynthesis can convert carbon dioxide into high value-added chemicals. However, due to the poor charge separation efficiency and CO2 activation ability, the conversion efficiency of photocatalytic CO2 reduction is greatly restricted. Ultrathin 2D photocatalyst emerges as an alternative to realize the higher CO2 reduction performance. In this review, the basic principle of CO2 photoreduction is introduced, and the types, advantages, and advances of 2D photocatalysts are reviewed in detail including metal oxides, metal chalcogenides, bismuth-based materials, MXene, metal-organic framework, and metal-free materials. Subsequently, the tactics for improving the performance of 2D photocatalysts are introduced in detail via the surface atomic configuration and electronic state tuning such as component tuning, crystal facet control, defect engineering, element doping, cocatalyst modification, polarization, and strain engineering. Finally, the concluding remarks and future development of 2D photocatalysts in CO2 reduction are prospected.

Spatial Heterogeneity and Strong Coupling of FeII /FeIII in an Individual Metal-Organic Framework Nanoparticle for Efficient CO2 Photoreduction.

The synthesis and characterization of an FeII /FeIII metal-organic framework (MOF) nanocrystal with spatial heterogeneity that arises from the non-uniform distribution of different valence states is disclosed. The FeII /FeIII -Ni Prussian blue analog (PBA) delivers superior photocatalytic performance in the selective CO2 reduction reaction thanks to the strong FeII /FeIII coupling, with CO yield up to 12.27 mmol g-1 h-1 and 90.6% selectivity under visible-light irradiation. Density functional theory calculation and experimental studies prove that the spatial heterogeneity of FeII /FeIII in the individual MOF nanocrystal not only directs and expedites the charge transfer within a catalyst particle but also creates the heterogeneity of catalytically-active Ni sites for efficient CO2 photoreduction. The current findings add to a growing literature of materials with compositional heterogeneity and provide a reference for future research.

In-Plane Palladium and Interplanar Copper Dual Single-Atom Catalyst in Bulk-Like Carbon Nitride for Cascade CO2 Photoreduction.

Dual single-atom catalysts (DSACs) are promising for breaking the scaling relationships and ensuring synergistic effects compared with conventional single-atom catalysts (SACs). Nevertheless, precise synthesis and optimization of DSACs with specific locations and functions remain challenging. Herein, dual single-atoms are specifically incorporated into the layer-stacked bulk-like carbon nitride, featuring in-plane three-coordinated Pd and interplanar four-coordinated Cu (Pd1-Cu1/b-CN) atomic sites, from both experimental results and DFT simulations. Using femtosecond time-resolved transient absorption (fs-TA) spectroscopy, it is found that the in-plane Pd features a charge decay lifetime of 95.6 ps which is much longer than that of the interplanar Cu (3.07 ps). This finding indicates that the in-plane Pd can provide electrons for the reaction as the catalytically active site in both structurally and dynamically favorable manners. Such a well-defined bi-functional cascade system ensures a 3.47-fold increase in CO yield compared to that of bulk-like CN (b-CN), while also exceeding the effects of single Pd1/b-CN and Cu1/b-CN sites. Furthermore, DFT calculations reveal that the inherent transformation from s-p coupling to d-p hybridization between the Pd site and CO2 molecule occurs during the initial CO2 adsorption and hydrogenation processes and stimulates the preferred CO2-to-CO reaction pathway.

Ligand Defect-Induced Active Sites in Ni-MOF-74 for Efficient Photocatalytic CO2 Reduction to CO.

The conversion of CO2 into valuable carbon-based products using clean and renewable solar energy has been a significant challenge in photocatalysis. It is of paramount importance to develop efficient photocatalysts for the catalytic conversion of CO2 using visible light. In this study, the Ni-MOF-74 material is successfully modified to achieve a highly porous structure (Ni-74-Am) through temperature and solvent modulation. Compared to the original Ni-MOF-74, Ni-74-Am contains more unsaturated Ni active sites resulting from defects, thereby enhancing the performance of CO2 photocatalytic conversion. Remarkably, Ni-74-Am exhibits outstanding photocatalytic performance, with a CO generation rate of 1380 µmol g-1 h-1 and 94% CO selectivity under visible light, significantly surpassing the majority of MOF-based photocatalysts reported to date. Furthermore, experimental characterizations reveal that Ni-74-Am has significantly higher efficiency of photogenerated electron-hole separation and faster carrier migration rate for photocatalytic CO2 reduction. This work enriches the design and application of defective MOFs and provides new insights into the design of MOF-based photocatalysts for renewable energy and environmental sustainability. The findings of this study hold significant promise for developing efficient photocatalysts for CO2 reduction under visible-light conditions.

Modulating the Moderate d-Band Center of Indium in InVO4 Nanobelts by Synergizing MnOx and Oxygen Vacancies for High-Efficiency CO2 Photoreduction.

Modulating the electronic properties of transition metal sites in photocatalysts at the atomic level is essential for achieving high-activity carbon dioxide photoreduction (CO2PR). An electronic strategy is herein proposed to engineer In-d-band center of InVO4 by incorporating MnOx nanoparticles and oxygen vacancies (VO) into holey InVO4 nanobelts (MnOx/VO-InVO4), which synergistically modulates the In-d-band center to a moderate level and consequently leads to high-efficiency CO2PR. The MnOx/VO-InVO4 catalyst with optimized electronic property exhibits a single carbon evolution rate of up to 145.3 µmol g-1 h-1 and a carbon monoxide (CO) product selectivity of 92.6%, coming out in front of reported InVO4-based materials. It is discovered that the modulated electronic property favors the interaction between the In sites and their intermediates, which thereby improves the thermodynamics and kinetics of the CO2PR-to-CO reaction. This work not only demonstrates the effective engineering of the d orbital of the low-coordination In atoms to promote CO2PR, but also paves the way for the application of tuning d-band center to develop high-efficiency catalysts.

Tannic Acid Selective Modulation Defects to Enhance the Photocatalytic CO2 Reduction Activity of Layered Double Hydroxides.

Recently, layered double hydroxides (LDH) have shown great potential in photoreduction of CO2 owing to its flexible structural adjustability. In this study, the mild acidic property of tannic acid (TA) is exploited to etch the bimetal LDH to create abundant vacancies to gain the coordination unsaturated active centers. Based on the different chelating abilities of TA to various metal ions, the active metals are remained by selective chelation while the inert metals are removed during the etching process of bimetal LDH. Furthermore, selective chelating with metal ions not only increases the percentage of highly active metals but also compensates for the structural damage caused by the etch, which achieves a scalpel-like selective construction of vacancies. The NiAl-LDH etched and functionalized by TA for 3 h exhibits superior photo-reduction of CO2 performance without co-catalysts and photo-sensitizers, which is 14 times that of the pristine NiAl-LDH. The fact that many bimetal LDHs can be functionalized by TA and exhibit significantly improved photocatalytic efficiency is confirmed, suggesting this strategy is generalized to functionalize double- or multi-metal LDH. The method provided in this work opens the door for polyphenol-functionalized LDHs to enhance their ability for light-driven chemical transformations.

Printing 3D Metallic Structures in Porous Matrix.

The fabrication of metallic micro/nanostructures has great potential for advancing optoelectronic microdevices. Over the past decade, femtosecond laser direct writing (FsLDW) technology has played a crucial role in driving progress in this field. In this study, silica gel glass is used as a supporting medium, and FsLDW is employed to reduce gold and palladium ions using 7-Diethylamino-3-thenoylcoumarin (DETC) as a two-photon sensitizer, enabling the printing of conductive multilayered and 3D metallic structures. How the pore size of the silica gel glass affects the electrical conductivity of printed metal wires is systematically examined. This 3D printing method is versatile and offers expanded opportunities for applying metallic micro/nanostructures in optoelectronic devices.

A Novel Non-Fullerene D-A Interface with Two Asymmetrical Electron Acceptors Facilitates Charge and Energy Transfer for Effective Carbon Dioxide Reduction.

Converting carbon dioxide (CO2) into high-value chemicals using solar energy remains a formidable challenge. In this study, the CSC@PM6:IDT6CN-M:IDT8CN-M non-fullerene small-molecule organic semiconductor is designed with highly efficient electron donor-acceptor (D-A) interface for photocatalytic reduction of CO2. Atomic Force Microscope and Transmission Electron Microscope images confirmed the formation of an interpenetrating fibrillar network after combination of donor and acceptor. The CO yield from the CSC@PM6:IDT6CN-M:IDT8CN-M reached 1346 µmol g-1 h-1, surpassing those of numerous reported inorganic photocatalysts. The D-A structure effectively facilitated charge separation to enable electrons transfer from the PM6 to IDT6CN-M:IDT8CN-M. Meanwhile, attributing to the dipole moments of the strong intermolecular interactions between IDT6CN-M and IDT8CN-M, the intermolecular forces are enhanced, and laminar stacking and π-π stacking are strengthened, thereby reinforcing energy transfer between acceptor molecules and significantly enhanced charge separation. Moreover, the strong internal electric field in the D-A interface enhanced the excited state lifetime of PM6:IDT6CN-M:IDT8CN-M. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis demonstrated that carboxylate (COOH*) is the predominant intermediate during CO2 reduction, and possible pathways of CO2 reduction to CO are deduced. This study presents a novel approach for designing materials with D-A interface to achieve high photocatalytic activity.

Enhanced Solar Fuel Production over In2 O3 @Co2 VO4 Hierarchical Nanofibers with S-Scheme Charge Separation Mechanism.

The conversion of CO2 into valuable solar fuels via photocatalysis is a promising strategy for addressing energy shortages and environmental crises. Here, novel In2 O3 @Co2 VO4 hierarchical heterostructures are fabricated by in situ growing Co2 VO4 nanorods onto In2 O3 nanofibers. First-principle calculations and X-ray photoelectron spectroscopy (XPS) measurements reveal the electron transfer between In2 O3 and Co2 VO4 driven by the difference in work functions, thus creating an interfacial electric field and bending the bands at the interfaces. In this case, the photogenerated electrons in In2 O3 transport to Co2 VO4 and recombine with its holes, indicating the formation of In2 O3 @Co2 VO4 S-scheme heterojunctions and resulting in effective separation of charge carriers, as confirmed by in situ irradiation XPS. The unique S-scheme mechanism, along with the enhanced optical absorption and the lower Gibbs free energy change for the production of * CHO, significantly contributes to the efficient CO2 photoreduction into CO and CH4 in the absence of any molecule cocatalyst or scavenger. Density functional theory simulation and in situ diffuse reflectance infrared Fourier transform spectroscopy are employed to elucidate the reaction mechanism in detail.

Nanostructurally Engineering Covalent Organic Frameworks for Boosting CO2 Photoreduction.

Herein, a series of imine-linked covalent organic frameworks (COFs) are developed with advanced ordered mesoporous hollow spherical nanomorphology and ultra-large mesopores (4.6 nm in size), named OMHS-COF-M (M = H, Co, and Ni). The ordered mesoporous hollow spherical nanomorphology is revealed to be formed via an Ostwald ripening mechanism based on a one-step self-templated strategy. Encouraged by its unique structural features and outstanding photoelectrical property, the OMHS-COF-Co material is applied as the photocatalyst for CO2-to-CO reduction. Remarkably, it delivers an impressive CO production rate as high as 15 874 µmol g-1 h-1, a large selectivity of 92.4%, and a preeminent cycling stability. From in/ex situ experiments and density functional theory (DFT) calculations, the excellent CO2 photoreduction performance is ascribed to the desirable cooperation of unique ordered mesoporous hollow spherical host and abundant isolated Co active sites, enhancing CO2 activation, and improving electron transfer kinetics as well as reducing the energy barriers for intermediates *COOH generation and CO desorption.

A Sandwich Structure Ag/MgFe2O4-Deposited Surface Carbonized Wood for Integrated Solar Steam Generation and Photoreduction of Cr(VI).

The severe deterioration of the marine ecosystem significantly negatively impacts the performance of solar-driven steam generation (SSG) and the quality of the obtained freshwater. Herein, a bifunctional Ag/MgFe2O4@SCW reactor with a sandwich structure is designed for efficient SSG and Cr(VI) reduction, which is constructed via in situ deposit Ag nanoparticles (NPs) and MgFe2O4 onto surface carbonized wood (SCW). Owing to the advanced sandwich structure and strong interfacial interactions between each component, an ultra-high evaporation rate of 1.55 kg m-2 h-1 and the efficiency of 88.6% are achieved using Ag/MgFe2O4@SCW under 1 sun. The system exhibits the long-term evaporation performance in the simulated sewage and strong acid/base solutions along with water-harvesting capacity in outdoor solar desalination. The quality of distilled water after desalination of actual seawater and NaCl solutions with different concentrations meets the WHO-recommended drinkable water standards. Furthermore, Ag/MgFe2O4@SCW shows outstanding antibacterial property, self-desalting capacity, as well as reusability and structure stability. Most importantly, the fast carrier separation endows Ag/MgFe2O4@SCW with superior photocatalytic activity and Cr(VI) photoreduction of up to 96.1% after 180 min of illumination. The bifunctional Ag/MgFe2O4@SCW reactor provides an advanced synergistic mechanism for improving SSG and photocatalytic performance, while being promising for solar-powered production of clean water.

Revealing the Effect of Electronic Configuration in Cux Species on CO2 Photoreduction Characteristic Products.

As of the present time, the in-depth study of the structure-activity relationship between electronic configuration and CO2 photoreduction performance is often overlooked. Herein, a series of Cux species modified CeO2 nanodots are constructed in situ by flame spray pyrolysis (FSP) to achieve an efficient photocatalytic CO2-to-C2 conversion with an electron utilization of up to 142.5 µmol g-1. Through an in-depth study of the electronic behavior and catalytic pathways, it is found that the Cu0/Cu+ species in the coexistence state of Cu0/Cu+/Cu2+ can optimize the energy band structure, photocurrent stability, and provide a kinetic basis for the active surface catalytic reaction process that requires the conversion of multiple electrons into C2 products, which ultimately enhances the CO2-to-C2H6 photoreduction by 3.8-fold and that for CO2-to-C2H4 photoreduction by 5.2-fold. Besides, the Cu2+ species in the coexistence state of Cu0/Cu+/Cu2+ are able to regulate the electronic behavior and the choice of the catalytic pathway, enabling the transitions between CO2-to-C2H6 and CO2-to-C2H4. This work indicates that electronic configuration optimization is an effective strategy to significantly enhance the CO2 photoreduction performance and provides new ideas for the design and synthesis of high-performance heterostructure photocatalysts.

Amorphous Strategy and Doping Copper on Metal-Organic Framework Surface for Enhanced Photocatalytic CO2 Reduction to C2H4.

Amorphous photocatalysts are characterized by numerous grain boundaries and abundant unsaturated sites, which enhance reaction efficiency from both kinetic and thermodynamic perspectives. However, amorphization strategies have rarely been used for photocatalytic CO2 reduction. Doping copper onto a metal-organic framework (MOF) surface can regulate the electronic structure of photocatalysts, promote electron transfer from the MOF to Cu, and improve the separation efficiency of electron-hole pairs. In this study, an amorphous photocatalyst MOFw-p/Cu containing highly dispersed Cu (0, I, II) sites was designed and synthesized by introducing a regulator and in situ copper species during the nucleation process of MOF (UiO-66-NH2). Various characterizations confirmed that the Cu species were anchored to the organometallic skeleton of the surface amorphization MOF structure. The synergistic effect of Cu doping and surface amorphization in MOFw-p/Cu can significantly enhance the CO and CH4 yields while promoting the formation of the multicarbon product C2H4. The approach holds promise for developing novel, highly efficient MOFs as photocatalysts for CO2 photoreduction, enabling the production of high-value-added C2 products.