Reproductive & Developmental Toxicity of quaternary ammonium compounds.

Quaternary ammonium compounds (QACs) are a class of chemicals commonly used as disinfectants in household and healthcare settings. Their usage has significantly increased in recent years due to the COVID-19 pandemic. In addition, QACs have replaced the recently banned disinfectants triclosan and triclocarban in consumer products. QACs are found in daily antimicrobial and personal care products such as household disinfectants, mouthwash, and hair care products. Due to the pervasiveness of QACs in daily use products, humans are constantly exposed. However, little is known about the health effects of everyday QAC exposure, particularly effects on human reproduction and development. Studies that investigate the harmful effects of QACs on reproduction are largely limited to high-dose studies, which may not be predictive of low dose, daily exposure, especially as QACs may be endocrine disrupting chemicals. This review analyzes recent studies on QAC effects on reproductive health, identifying knowledge gaps, and recommending future directions in QAC-related research.

Sex-Specific Effects of Environmental Exposure to the Antimicrobial Agents Benzalkonium Chloride and Triclosan on the Gut Microbiota and Health of Zebrafish (Danio rerio).

The use of disinfectants containing benzalkonium chloride (BAC) has become increasingly widespread in response to triclosan (TCS) restrictions and the COVID-19 pandemic, leading to the increasing presence of BAC in aquatic ecosystems. However, the potential environmental health impacts of BAC on fish remain poorly explored. In this study, we show that BAC and TCS can induce the gut dysbiosis in zebrafish (Danio rerio), with substantial effects on health. Breeding pairs of adult zebrafish were exposed to environmentally relevant concentrations of BAC and TCS (0.4-40 µg/L) for 42 days. Both BAC and TCS exposure perturbed the gut microbiota, triggering the classical NF-κB signaling pathway and resulting in downstream pathological toxicity associated with inflammatory responses, histological damage, inhibited ingestion, and decreased survival. These effects were dose-dependent and sex-specific, as female zebrafish were more susceptible than male zebrafish. Furthermore, we found that BAC induced toxicity to a greater extent than the restricted TCS at environmentally relevant concentrations, which is particularly concerning. Our results suggest that environmental exposure to antimicrobial chemicals can have ecological consequences by perturbing the gut microbiota, a previously underappreciated target of such chemicals. Rigorous ecological analysis should be conducted before widely introducing replacement antimicrobial compounds into disinfecting products.

High-Resolution Mass Spectrometry Screening of Quaternary Ammonium Compounds (QACs) in Dust from Homes and Various Microenvironments in South China.

Despite their ubiquitous use, information regarding the presence of quaternary ammonium compounds (QACs) in various microenvironments remains scarce and only a small subset of QACs has been monitored using targeted chemical analysis. In this study, a total of 111 dust samples were collected from homes and various public settings in South China during the COVID-19 pandemic and were analyzed for traditional and emerging QACs using high-resolution mass spectrometry. The total traditional QAC concentrations in residential dust (∑traditional QAC, sum of 18 traditional QACs) ranged from 13.8 to 150 µg/g with a median concentration of 42.2 µg/g. Twenty-eight emerging QACs were identified in these samples, and the composition of ∑emerging QAC (sum of emerging QACs) to ∑QAC (sum of traditional and emerging QACs) ranged from 19 to 42% across various microenvironments, indicating the widespread existence of emerging QACs in indoor environments. Additionally, dust samples from cinemas exhibited higher ∑QAC concentrations compared to homes (medians 65.9 µg/g vs 58.3 µg/g, respectively), indicating heavier emission sources of QACs in these places. Interestingly, significantly higher ∑QAC concentrations were observed in dust from the rooms with carpets than those without (medians 65.6 µg/g vs 32.6 µg/g, p < 0.05, respectively). Overall, this study sheds light on the ubiquitous occurrence of QACs in indoor environments in South China.

Development and Application of a Multidimensional Database for the Detection of Quaternary Ammonium Compounds and Their Phase I Hepatic Metabolites in Humans.

The COVID-19 pandemic has led to significantly increased human exposure to the widely used disinfectants quaternary ammonium compounds (QACs). Xenobiotic metabolism serves a critical role in the clearance of environmental molecules, yet limited data are available on the routes of QAC metabolism or metabolite levels in humans. To address this gap and to advance QAC biomonitoring capabilities, we analyzed 19 commonly used QACs and their phase I metabolites by liquid chromatography-ion mobility-tandem mass spectrometry (LC-IM-MS/MS). In vitro generation of QAC metabolites by human liver microsomes produced a series of oxidized metabolites, with metabolism generally occurring on the alkyl chain group, as supported by MS/MS fragmentation. Discernible trends were observed in the gas-phase IM behavior of QAC metabolites, which, despite their increased mass, displayed smaller collision cross-section (CCS) values than those of their respective parent compounds. We then constructed a multidimensional reference SQLite database consisting of m/z, CCS, retention time (rt), and MS/MS spectra for 19 parent QACs and 81 QAC metabolites. Using this database, we confidently identified 13 parent QACs and 35 metabolites in de-identified human fecal samples. This is the first study to integrate in vitro metabolite biosynthesis with LC-IM-MS/MS for the simultaneous monitoring of parent QACs and their metabolites in humans.

Synthesis and antimicrobial activity testing of quaternary ammonium silane compounds.

With increasing health awareness of the pathogenic effects of disease-causing microorganisms, interest in and use (of medical textiles, disinfectants in medical devices, etc.) of antimicrobial substances have increased in various applications, such as medical textiles and disinfectants (alcohol-based and nonalcoholic), in medical devices There are several concerns with alcohol-based disinfectants, such as surface deformation of medical devices due to high alcohol content and damage to skin tissue caused by lipid and protein denaturation of cell membranes. Quaternary ammonium compounds (quats) were preferred because they have the potential to prepare water-based disinfectants. In this study, novel (3-chloropropyl)triethoxysilane (CPTMO) and (3-chloropropyl)triethoxysilane (CPTEO) based quaternary ammonium silane compounds (silane-quats) were developed using quats with carbon chain lengths of C12, C14, C16 and C18. Titration (ASTM D2074) was used to calculate the yield of the synthesis and the structures of the products were characterised by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (13C NMR, 1H NMR) and gas chromatography-mass spectrometry (GC-MS).The in vitro antimicrobial activity of the synthesized samples was evaluated against Gram-positive (Staphylococcus aureus (S. aureus), Enterococcus hirae (E. hirae)) and Gram-negative (Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa)) bacteria and fungi (Candida albicans (C. albicans), Aspergillus brasiliensis (A. brasiliensis)) using the minimum inhibitory concentration (MIC) test. According to MIC tests, the silane-quats with the highest antimicrobial effects were dimethylhexadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (SQ3), which had an MIC of < 16 µg/ml (ppm) against E. coli, S. aureus, E. hirae, C. albicans, and A. brasiliensis and 32 µg/ml against P. aeruginosa. The MIC test results also showed antimicrobial activity at least 2 times greater than that of the commercially available disinfectant benzalkonium chloride (BAC). Findings suggest that SQ3 (C16) holds promise as an effective medical disinfectant, presenting a novel approach to combating microbial infections in healthcare settings.

A Label-Free Optical Flow Cytometry Based-Method for Rapid Assay of Disinfectants' Bactericidal Activity.

Selecting the appropriate disinfectant to control and prevent healthcare-associated infections (HAIs) is a challenging task for environmental health experts due to the large number of available disinfectant products. This study aimed to develop a label-free flow cytometry (FCM) method for the rapid evaluation of bactericidal activity and to compare its efficacy with that of standard qualitative/quantitative suspension tests. The bactericidal efficiency of eight commercial disinfectants containing quaternary ammonium compounds (QACs) was evaluated against four strains recommended by EN 13727 (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus hirae) and four multidrug-resistant pathogens. The proposed FCM protocol measures changes in scattered light and counts following disinfectant exposure, neutralization, and culture steps. Unlike other available FCM-based methods, this approach does not rely on autofluorescence measurements, impedance cytometry, or fluorescent dyes. The FCM scattered light signals revealed both decreased count rates and morphological changes after treatment with minimum inhibitory concentrations (MICs) and higher concentrations for all tested bacteria. The results from the FCM measurements showed excellent correlation with those from standard assays, providing a rapid tool for monitoring the susceptibility profile of clinical, multidrug-resistant pathogens to chemical disinfectants, which could support infection prevention and control procedures for healthcare environments. This label-free FCM protocol offers a novel and rapid tool for environmental health experts, aiding in the optimization of disinfectant selection for the prevention and control of HAIs.

Facile Synthesis of Dual-Functional Cross-Linked Membranes with Contact-Killing Antimicrobial Properties and Humidity-Response.

Poly(2-hydroxyethylmethacrylate-co-2-(dimethylamino)ethyl methacrylate), P(HEMA-co-DMAEMAx), copolymers were quaternized through the reaction of a part of (dimethylamino)ethyl moieties of DMAEMA units with 1-bromohexadecane. Antimicrobial coatings were further prepared through the cross-linking reaction between the remaining DMAEMA units of these copolymers and the epoxide ring of poly(N,N-dimethylacrylamide-co-glycidyl methacrylate), P(DMAm-co-GMAx), copolymers. The combination of P(HEMA-co-DMAEMAx)/P(DMAm-co-GMAx) copolymers not only enabled control over quaternization and cross-linking for coating stabilization but also allowed the optimization of the processing routes towards a more facile cost-effective methodology and the use of environmentally friendly solvents like ethanol. Careful consideration was given to achieve the right content of quaternized units, qDMAEMA, to ensure antimicrobial efficacy through an appropriate amphiphilic balance and sufficient free DMAEMA groups to react with GMA for coating stabilization. Optimal synthesis conditions were achieved by membranes consisting of cross-linked P(HEMA78-co-DMAEMA9-co-qDMAEMA13)/P(DMAm-co-GMA42) membranes. The obtained membranes were multifunctional as they were self-standing and antimicrobial, while they demonstrated a distinct fast response to changes in humidity levels, widening the opportunities for the construction of "smart" antimicrobial actuators, such as non-contact antimicrobial switches.

Quaternary ammoniums activate human dendritic cells and induce a specific T-cell response in vitro.

BACKGROUND: In many countries, neuro-muscular blocking agents (NMBAs) are the first cause of perioperative anaphylaxis. Epidemiological studies identified pholcodine, a quaternary ammonium-containing opiate as one of the sensitization sources. However, NMBA anaphylaxis exists in countries where pholcodine was unavailable, prompting the hypothesis of other sensitizing molecules, most likely quaternary ammonium compounds (QACs). Indeed, QACs are commonly used as disinfectants, antiseptics, preservatives, and detergents. Occupational exposure to QACs has been reported as a risk factor for NMBA anaphylaxis, but little is known about the sensitization mechanism and the capacity of these molecules to elicit an immune response. We aimed to establish the immunogenicity of QACs representative of the main existing chemical structures. METHODS: We measured the sensitization potential of seven QACs (two polyquaterniums, three alkyl-ammoniums and two aromatic ammoniums) by using two standard dendritic cells (DCs) models (THP-1 cell line and monocyte derived-dendritic cells). The allergenicity of the sensitizing compounds was further tested in heterologous and autologous T-cell-DC co-culture models. RESULTS: Amongst the seven molecules tested, four could modulate activation markers on DCs, and thus can be classified as chemical sensitizers (polyquaterniums-7 and -10, ethylhexadecyldimethylammonium and benzethonium). This activation was accompanied by the secretion of pro-inflammatory and maturation cytokines. Furthermore, activation by polyquaternium-7 could induce T-cell proliferation in heterologous and autologous coculture models, demonstrating that this molecule can induce a specific CD4+ T cell response. CONCLUSIONS: We provide evidence at the cellular level that some QACs can elicit an immune response, which could be in line with the hypothesis of these molecules' role in NMBA sensitization.

Pholcodine exposure increases the risk of perioperative anaphylaxis to neuromuscular blocking agents: the ALPHO case-control study.

BACKGROUND: Neuromuscular blocking agents (NMBAs) are among the leading cause of perioperative anaphylaxis, and most of these reactions are IgE mediated. Allergic sensitisation induced by environmental exposure to other quaternary ammonium-containing compounds, such as pholcodine, has been suggested. The aim of this study was to assess the relationship between pholcodine exposure and NMBA-related anaphylaxis. METHODS: ALPHO was a multicentre case-control study, comparing pholcodine exposure within a year before anaesthesia between patients with NMBA-related perioperative anaphylaxis (cases) and control patients with uneventful anaesthesia in France. Each case was matched to two controls by age, sex, type of NMBA, geographic area, and season. Pholcodine exposure was assessed by a self-administered questionnaire and pharmaceutical history retrieved from pharmacy records. The diagnostic values of anti-pholcodine and anti-quaternary ammonium specific IgE (sIgE) were also evaluated. RESULTS: Overall, 167 cases were matched with 334 controls. NMBA-related anaphylaxis was significantly associated with pholcodine consumption (odds ratio 4.2; 95% confidence interval 2.3-7.0) and occupational exposure to quaternary ammonium compounds (odds ratio 6.1; 95% confidence interval 2.7-13.6), suggesting that apart from pholcodine, other environmental factors can also lead to sensitisation to NMBAs. Pholcodine and quaternary ammonium sIgEs had a high negative predictive value (99.9%) but a very low positive predictive value (<3%) for identifying NMBA-related reactions. CONCLUSIONS: Patients exposed to pholcodine 12 months before NMBA exposure have a significantly higher risk of an NMBA-related anaphylaxis. The low positive predictive values of pholcodine and quaternary ammonium sIgEs precludes their use to identify a population with a high risk of NMBA-related anaphylaxis. CLINICAL TRIAL REGISTRATION: NCT02250729.

Tiered human health risk assessment of antibacterial quaternary ammonium compounds (QACs) in dishwashing detergents.

Quaternary ammonium compounds (QACs) are widely used in consumer products because of their unique antibacterial properties, and dishwashing detergents are a major source of exposure through oral, inhalation, and dermal routes. The three classes of QACs, including benzalkonium chloride (BAC), n-alkyldimethylethylbenzylammonium chloride (ADEBAC), and di-n-alkyldimethylammonium chloride (DDAC), in spray and non-spray types of dishwashing detergents were quantified by high-performance liquid chromatography-mass spectrometry. A tiered risk assessment approach was also considered. In the Tier 1 assessment, the mean and worst-case exposure were estimated to screen for rough exposure and risk levels. In the Tier 2 assessment, mean and upper-tail exposure levels were calculated based on the exposure parameters of Korean consumers using Monte Carlo simulation. QACs had a low frequency of detection of up to 20% in dishwashing detergents, and the contents of detected QACs varied depending on the individual samples. Based on the results of the Tier 1 assessment, BACs and DDACs posed potential health risks via inhalation and dermal routes. Tier 2 assessment suggested that the current level of oral and dermal exposure of Korean consumers to QACs in dishwashing detergents is unlikely to pose a health risk, even for upper-tail exposure groups. However, the present results suggest that spray-type DDACs may pose a health risk in the upper-tail inhalation exposure group, and further investigation is required to clarify this risk.

A Systematic Review and Quantitative Synthesis of the Efficacy of Quaternary Ammonium Compounds in Disinfesting Nonfungal Plant Pathogens.

This quantitative review and systematic analysis of the effectiveness of quaternary ammonium compounds (QACs) in disinfesting nonfungal plant pathogens in agricultural and horticultural cropping systems is a complementary follow-up to a previous study that evaluated the efficacy of QACs against fungal plant pathogens. In the present study, a meta-analysis involving 67 studies was conducted to assess the overall efficacy of QACs against plant pathogenic bacteria, oomycetes, and viruses and to identify factors associated with observed differences in product efficacy. Across all studies, QACs resulted in a significant (P < 0.0001) reduction in either disease intensity or propagule viability with a mean Hedges' g ([Formula: see text]) of 1.75, indicating that overall QAC treatments were moderately effective against nonfungal pathogens. Significant differences in product efficacy were observed between organism types (P = 0.0001), with QAC interventions resulting in higher efficacy (P = 0.0002) against oomycetes ([Formula: see text] = 4.20) than against viruses ([Formula: see text] = 1.42) and bacteria ([Formula: see text] = 1.07), which were not different (P = 0.2689) from each other. As a result, bacterium and virus types were combined into a composite set (BacVir). QAC intervention against BacVir resulted in significant differences in efficacy within categorical moderator subgroups for genus (P = 0.0133), target material (P = 0.0001), and QAC product generation (P = 0.0281). QAC intervention against oomycetes resulted in significant differences in efficacy only for genus (P < 0.0001). For the BacVir composite, five random effect (RE) meta-regression models were significant (P = 0.05), where models with dose and time, dose and genus, time and genus, dose and target, and time and target accounted for 62, 61, 52, 83, and 88%, respectively, of the variance in true effect sizes (R2) associated with [Formula: see text]. For oomycetes, three RE meta-regression models were significant (P = 0.05), where models with dose and time, dose and genus, and time and genus accounted for 64, 86, and 90%, respectively, of R2 associated with [Formula: see text]. These results show that while QACs are moderately effective against nonfungal plant pathogens, the observed variability in their efficacy due to dose of active ingredient and contact time of these products can be influenced by organism type, genus within organism type, the target being treated, and the generation of QAC products.

Study of Cationic Surfactants Raw Materials for COVID-19 Disinfecting Formulations by Potentiometric Surfactant Sensor.

The behavior of a new 1,3-dioctadecyl-1H-imidazol-3-ium tetraphenylborate (DODI-TPB) surfactant sensor was studied in single and complex mixtures of technical grade QACs-benzalkonium chloride (BAC), N,N-didecyl-N,N-dimethylammonium chloride (DDAC), and N,N-dioctyl-N,N-dimethylammonium chloride (DOAC) usually used in COVID-19 disinfecting agents formulations. The results obtained with the new DODI-TPB sensor were in good agreement with data measured by a 1,3-dihexadecyl-1H-benzo[d]imidazol-3-ium-tetraphenylborate (DMI-TPB) surfactant sensor, as well as two-phase titration used as a reference method. The quantitative titrations of a two-component mixture of the cationic homologs (a) DDAC and DOAC; and (b) BAC and DOAC showed that the new DODI-TPB surfactant sensor can clearly distinguish two separate mixture components in a single potentiometric titration curve with two characteristic inflexion points. The consumption of SDS (used as a titrant) in the end-point 1 (EP 1) corresponded to the content of DDAC (or BAC), whereas the consumption in the end-point 2 (EP 2) corresponded to the total content of both cationic surfactants in the mixture. DOAC content in both mixtures can be calculated from the difference of the titrant used to achieve EP1 and EP2. The addition of nonionic surfactants resulted in the signal change decrease from 333.2 mV (1:0; no nonionic surfactant added) to 243.0 mV (1:10, w/w). The sensor was successfully tested in ten two-component COVID-19 disinfecting formulations.

Anticancer and Antiphytopathogenic Activity of Fluorinated Isatins and Their Water-Soluble Hydrazone Derivatives.

A series of new fluorinated 1-benzylisatins was synthesized in high yields via a simple one-pot procedure in order to explore the possible effect of ortho-fluoro (3a), chloro (3b), or bis-fluoro (3d) substitution on the biological activity of this pharmacophore. Furthermore, the new isatins could be converted into water-soluble isatin-3-hydrazones using their acid-catalyzed reaction with Girard's reagent P and its dimethyl analog. The cytotoxic action of these substances is associated with the induction of apoptosis caused by mitochondrial membrane dissipation and stimulated reactive oxygen species production in tumor cells. In addition, compounds 3a and 3b exhibit platelet antiaggregation activity at the level of acetylsalicylic acid, and the whole series of fluorine-containing isatins does not adversely affect the hemostasis system as a whole. Among the new water-soluble pyridinium isatin-3-acylhydrazones, compounds 7c and 5c,e exhibit the highest antagonistic effect against phytopathogens of bacterial and fungal origin and can be considered useful leads for combating plant diseases.

Development of Antifouling Coatings Based on Quaternary Ammonium Compounds through a Multilayer Approach.

The development of polymeric materials as antifouling coatings for aquaculture nets is elaborated in the present work. In this context, cross-linked polymeric systems based on quaternary ammonium compounds (immobilized or releasable) prepared under mild aqueous conditions were introduced as a more environmentally friendly methodology for coating nets on a large scale. To optimize the duration of action of the coatings, a multilayer coating method was applied by combining the antimicrobial organo-soluble copolymer poly(cetyltrimethylammonium 4-styrenesulfonate-co-glycidyl methacrylate) [P(SSAmC16-co-GMA20)] as the first layer with either the water-soluble copolymer poly(vinylbenzyl trimethylammonium chloride-co-acrylic acid) [P(VBCTMAM-co-AA20)] or the water-soluble polymers poly(acrylic acid) (PAA) and poly(hexamethylene guanidine), PHMG, as the second layer. The above-mentioned approach, followed by thermal cross-linking of the polymeric coatings, resulted in stable materials with controlled release of the biocidal species. The coated nets were studied in terms of their antifouling efficiency under accelerated biofouling conditions as well as under real conditions in an aquaculture field. Resistance to biofouling after three water-nutrient replenishments was observed under laboratory accelerated biofouling conditions. In addition, at the end of the field test (day 23) the uncoated nets were completely covered by marine contaminants, while the coated nets remained intact over most of their extent.

The Antimicrobial and Antibiofilm Potential of New Water-Soluble Tris-Quaternary Ammonium Compounds.

The invention and innovation of highly effective antimicrobials are always crucial tasks for medical and organic chemistry, especially at the current time, when there is a serious threat of shortages of effective antimicrobials following the pandemic. In the study presented in this article, we established a new approach to synthesizing three novel series of bioactive water-soluble tris-quaternary ammonium compounds using an optimized one-pot method, and we assessed their antimicrobial and antibiofilm potential. Five pathogenic microorganisms of the ESKAPE group, including highly resistant clinical isolates, were used as the test samples. Moreover, we highlighted the dependence of antibacterial activity from the hydrophilic-hydrophobic balance of the QACs and noted the significant performance of the desired products on biofilms with MBEC as low as 16 mg/L against bacteria and 8 mg/L against fungi. Particularly notable was the high activity against Pseudomonas aeruginosa and Acinetobacter baumannii, which are among the most resilient bacteria known. The presented work will provide useful insights for future research on the topic.

Effect and mechanism of benzalkonium bromide on short chain fatty acid production from anaerobic sludge fermentation process.

Quaternary ammonium compounds (QACs) was frequently detected in wastewater treatment plants and leads to potential toxicity to the related biological processes. In this study, the effect of benzalkonium bromide (BK) on anaerobic sludge fermentation process for short chain fatty acid (SCFAs) production was investigated. Batch experiments indicated that BK exposure significantly enhanced the SCFAs production from anaerobic fermentation sludge and the maximum concentration of total SCFAs increased from 474.40 ± 12.35 mg/L to 916.42 ± 20.35 mg/L with BK increasing from 0 to 8.69 mg/g VSS. Mechanism exploration exhibited that the presence of BK enhanced much more bioavailable organic matters release, little affected on hydrolysis, acidification, but seriously inhibited methanogenesis. Microbial community investigation revealed that BK exposure importantly enhanced the relative abundances of hydrolytic-acidifying bacteria and also improved the metabolic pathways and functional genes for sludge lysis. This work further supplement the information for environmental toxicity of emerging pollutants.

Bringing resistance modulation to methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant enterococci (VRE) strains using a quaternary ammonium compound coupled with zinc oxide nanoparticles.

Nowadays, there are concerns about the inadequacy of new antimicrobials and the rise of antimicrobial resistance. Hence, novel antibacterial agents need to be discovered. In this respect, the use of nanoparticles (NPs) seems promising. Zinc oxide nanoparticles (ZnONPs) are functional and inexpensive NPs that possess antimicrobial characteristics, stability, microbial selectivity, and an easy manufacturing procedure. Imidazolium is one of the quaternary ammonium compounds (QACs) frequently employed as antimicrobial materials in industrial and clinical fields. The present study successfully employed imidazolium to couple with ZnONPs to improve their antimicrobial properties. The antimicrobial activities of ZnONPs doped with imidazolium (IM@ZnONPs) compared to ZnONPs and zinc (Zn) ions against some pathogen microorganism species including Streptococcus aureus (S. aureus), Enterococcus faecalis (E. faecalis), methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), and Candida albicans (C. albicans) were evaluated by the microdilution method. The minimum inhibitory concentration (MIC) results revealed that the antimicrobial activities of Zn ions, ZnONPs, and IM@ZnONPs were concentration-dependent. Moreover, we found that the nanoparticulate forms of Zn had considerably stronger antibacterial activities, particularly against VRE and MRSA, compared to Zn ions which failed to restrain the microbial strains at the tested microdilutions of this experiment (MIC: ≥512 µg/mL). Interestingly, the incorporation of imidazolium into ZnONPs resulted in significant inhibition of microbial growth in antimicrobial-resistant pathogens at low concentrations (MIC: 32 µg/mL) and effectively improved the monodispersity of the final coated NPs in terms of size and morphology. To sum up, IM@ZnONPs can be a favorable substitute for conventional antimicrobial agents to combat antimicrobial resistance in many fields, including pharmaceuticals, dental materials, and cosmetic products.

Synthesis and characterization ofα-Fe2O3nanoparticles showing potential applications for sensing quaternary ammonium vapor at room temperature.

P-type and n-type metal oxide semiconductors are widely used in the manufacture of gas sensing materials, due to their excellent electronic, electrical and electrocatalytic properties. Hematite (α-Fe2O3) compound has been reported as a promising material for sensing broad types of gases, due to its affordability, good stability and semiconducting properties. In the present work, the efficient and easy-to-implement sol-gel method has been used to synthesizeα-Fe2O3nanoparticles (NPs). The TGA-DSC characterizations of the precursor gel provided information about the phase transformation temperature and the mass percentage of the hematite NPs. X-ray diffraction, transmission electron microscopy and x-ray photoelectron spectroscopy data analyses indicated the formation of two iron oxide phases (hematite and magnetite) when the NPs are subjected to thermal treatment at 400 °C. Meanwhile, only the hematite phase was determined for thermal annealing above 500 °C up to 800 °C. Besides, the crystallite size shows an increasing trend with the thermal annealing and no defined morphology. A clear reduction of surface defects, associated with oxygen vacancies was also evidenced when the annealing temperature was increased, resulting in changes on the electrical properties of hematite NPs. Resistive gas-sensing tests were carried out using hematite NPs + glycerin paste, to detect quaternary ammonium compounds. Room-temperature high sensitivity values (Sr âˆ¼ 4) have been obtained during the detection of ∼1 mM quaternary ammonium compounds vapor. The dependence of the sensitivity on the particle size, the mass ratio of NPs with respect to the organic ligand, changes in the dielectric properties, and the electrical conduction mechanism of gas sensing was discussed.

Singlet oxygen-dominated electrocatalytic oxidation treatment for the high-salinity quaternary ammonium compound wastewater with Ti/(RuxIry)O2 anode.

The widespread application of quaternary ammonium compounds (QAC) has posed a serious hazard to the environment and human being, and high concentration of Cl- in QAC wastewater may further increase the difficulty of pollutants elimination. In this study, such a QAC wastewater under high salinity conditions was chosen as the target, the prepared Ti/(RuxIry)O2 anode exhibited favorable catalytic performance for the oxidation and mineralization of QAC under high salinity conditions. Increasing the Ru/Ir ratio of Ti-based electrode coating also slightly promoted the inner catalytic capacity. The combination of electron paramagnetic resonance (EPR) and quenching experiments indicates that 1O2 served as a main reactive specie in the Ti/(RuxIry)O2 electrooxidation system. The increase of pH could decrease the removal efficiency of QAC for the reduced 1O2 yield, and the rise of Cl- concentration could favor the QAC oxidation, and Cl- was a better electrolyte to promote the oxidation of organic contaminants when compared to Na2SO4 or Na2CO3. Additionally, the conversion pathway of the model pollutant was tentatively investigated, the results demonstrated that there were almost no halogenated final products residual by electrocatalytic oxidation with Ti/(RuxIry)O2 anode. This study not only elucidate the reaction mechanism of Ti/(RuxIry)O2 anode electrocatalytic oxidation of high salinity QAC wastewater, but also may provide an efficacious and eco-friendly method for the treatment of high salinity QAC wastewater.

Adverse Outcome Pathway for Antimicrobial Quaternary Ammonium Compounds.

Quaternary ammonium compounds (QACs) or quats are a large class of antimicrobial chemicals used in households and institutions as sanitizers and disinfectants. These chemicals are utilized as food processing sanitizers, algicides, in the process of water treatment, and preservatives in cosmetics. The aim of this study was to determine an Adverse Outcome Pathway (AOP) whereby two widely used QACs, alkyl dimethyl benzyl ammonium chloride (ADBAC) and didecyl dimethyl ammonium chloride (DDAC), may result in respiratory tract and gastrointestinal tract effects. When inhaled or ingested, these QACs are incorporated into the epithelial cell membrane at the point of contact. With sufficient dosage, the epithelial membrane is disrupted, reducing its fluidity, and releasing cellular contents. Further, ADBAC and DDAC might disrupt mitochondrial functions leading to decreased ATP production. Both events might lead to cell death, either attributed to direct lysis, necrosis, or apoptosis. Pro-inflammatory mediators are recruited to the tissue, inducing inflammation, edema, and excess mucus production. The primary tissue-level adverse outcome is epithelial degeneration and dysplasia. Most important, no apparent metabolism or distribution is involved in QAC action. Based upon this knowledge, it is suggested to replace default Uncertainty Factors for risk assessments with a set of Data Derived Extrapolation Factors.