Androgen synthesis cell-specific CREBZF deficiency alters adrenal cortex steroid secretion and develops behavioral abnormalities in adult male mice.

The global challenge of male infertility is escalating, notably due to the decreased testosterone (T) synthesis in testicular Leydig cells under stress, underscoring the critical need for a more profound understanding of its regulatory mechanisms. CREBZF, a novel basic region-leucine zipper transcription factor, regulates testosterone synthesis in mouse Leydig cells in vitro; however, further validation through in vivo experiments is essential. Our study utilized Cyp17a1-Cre to knock out CREBZF in androgen-synthesis cells and explored the physiological roles of CREBZF in fertility, steroid hormone synthesis, and behaviors in adult male mice. Conditional knockout (cKO) CREBZF did not affect fertility and serum testosterone level in male mice. Primary Leydig cells isolated from CREBZF-cKO mice showed impaired testosterone secretion and decreased mRNA levels of Star, Cyp17a1, and Hsd3b1. Loss of CREBZF resulted in thickening of the adrenal cortex, especially X-zone, with elevated serum corticosterone and dehydroepiandrosterone levels and decreased serum dehydroepiandrosterone sulfate levels. Immunohistochemical staining revealed increased expression of StAR, Cyp11a1, and 17ß-Hsd3 in the adrenal cortex of CREBZF-cKO mice, while the expression of AR was significantly reduced. Along with the histological changes and abnormal steroid levels in the adrenal gland, CREBZF-cKO mice showed higher anxiety-like behavior and impaired memory in the elevated plus maze and Barnes maze, respectively. In summary, CREBZF is dispensable for fertility, and CREBZF deficiency in Leydig cells promotes adrenal function in adult male mice. These results shed light on the requirement of CREBZF for fertility, adrenal steroid synthesis, and stress response in adult male mice, and contribute to understanding the crosstalk between testes and adrenal glands.

Comparison of early changes in tear film protein profiles after small incision lenticule extraction (SMILE) and femtosecond LASIK (FS-LASIK) surgery.

BACKGROUND: Small incision lenticule extraction (SMILE) and femtosecond laser-assisted in situ keratomileusis (LASIK) are widely used surgical methods to correct myopia with comparable efficacy, predictability, and safety. We examined and compared the early changes of tear protein profiles after SMILE and FS-LASIK surgery in order to find possible differences in the initial corneal healing process. METHODS: SMILE operations for 26 eyes were made with Visumax femtosecond laser. In FS-LASIK surgery for 30 eyes, the flaps were made with Ziemer FEMTO LDV Z6 femtosecond laser and stromal ablation with Wavelight EX500 excimer laser. Tear samples were collected preoperatively, and 1.5 h and 1 month postoperatively using glass microcapillary tubes. Tear protein identification and quantification were performed with sequential window acquisition of all theoretical fragment ion spectra mass spectrometry (SWATH-MS). RESULTS: Immediately (1.5 h) after we found differences in 89 proteins after SMILE and in 123 after FS-LASIK operation compared to preoperative protein levels. Of these differentially expressed proteins, 48 proteins were common for both surgery types. There were, however, quantitative differences between SMILE and FS-LASIK. Upregulated proteins were mostly connected to inflammatory response and migration of the cells connected to immune system. One month after the operation protein expressions levels were returned to baseline levels with both surgical methods. CONCLUSIONS: Our study showed that immediate changes in protein profiles after SMILE and FS-LASIK surgeries and differences between the methods are connected to inflammatory process, and the protein levels quickly return to the baseline within 1 month. The differences in protein profiles between the methods are probably associated with the different size of the epithelial wound induced.

Longitudinal analysis of wound healing response post SMILE and LASIK surgery using proteomic profiling of tears.

Different types of refractive surgeries often exhibit differences in wound healing responses. The current study investigated post-operative tear protein profiles in subjects who underwent LASIK and SMILE to elucidate global changes to the proteomic profile during the period the patient cornea undergoes healing. In this study, 10 patients underwent LASIK and SMILE surgery with a contralateral paired eye design. Tear samples were collected using Schirmer's strips preoperatively, at 1 month, 3 months and 6 months postoperatively. Quantitative ITRAQ labeled proteomics was performed and the tear protein ratios were normalized to pre-operative protein levels for each subject. Whole proteomics identified 1345 proteins in tears from LASIK and 1584 proteins in SMILE across time points. About 67 proteins were common in LASIK and SMILE tears across all the time points. Wound healing responses were differentially regulated between two refractive surgeries (SMILE and LASIK). The proteins Ceruloplasmin, Clusterin, Serotransferrin were upregulated at 1 month and 3 months and downregulated at 6 months post operatively in LASIK surgery where as in SMILE these were downregulated. Galectin 3 binding protein showed upregulation at 1 month and the levels decreased at 3 months and 6 months postop in LASIK tears whereas the levels increased at 3 months and 6 months post-op in SMILE tears. The levels of proteins that protect from oxidative stress were higher in SMILE as compared to LASIK postoperatively. The extracellular matrix proteins showed an increase in expression at 6 months in SMILE tears and was stabilized at 6 months in LASIK tears post operatively. Different refractive surgeries induce distinct wound healing responses as identified in tears. This study has implications in targeting key proteins for improving the clinical outcome postrefractive surgery.

Comparative visual outcomes of the first versus second eye following small-incision lenticule extraction (SMILE).

BACKGROUND: This study aimed to compare the visual outcomes of the first operated eyes with those of the second operated eyes following small-incision lenticule extraction (SMILE). METHODS: A total of 202 patients (404 eyes) underwent SMILE using the tear film mark centration method for myopia and myopic astigmatism correction. Baseline characteristics, objective optical quality, decentered displacement, induced corneal aberrations, and modulation transfer function (MTF) values were assessed. Linear regression analyzed the relationship between decentration and visual quality parameters, including corneal aberrations and MTF values. RESULTS: No significant difference was observed in objective visual quality, efficacy, and safety indexes between the two groups (all P > 0.05). The average decentered displacement for the first and second surgical eyes was 0.278 ± 0.17 mm and 0.315 ± 0.15 mm, respectively (P = 0.002). The horizontal coma in the first surgical eyes were notably lower than in the second (P = 0.000). MTF values at spatial frequencies of 5, 10, 15, and 20 cycles/degree (c/d) were higher in the first surgical eyes compared to the second (all P < 0.05). Linear regression indicated that high-order aberrations (HOAs), root mean square (RMS) coma, spherical aberration, horizontal coma, vertical coma, and eccentric displacement were all linearly correlated. Furthermore, MTF values exhibited a linear relationship with eccentric displacement across these spatial frequencies. CONCLUSIONS: There was no discernible difference in visual acuity, efficacy, or safety between the two operated eyes. Nonetheless, the first operated eyes exhibited reduced decentered displacement and demonstrated superior outcomes in terms of horizontal coma and MTF values compared to the second operated eyes following SMILE. The variations in visual quality parameters were linearly correlated with decentered displacement.

Capturing the smile: Exploring embodied and social acts of smiling.

Smiling is an embodied and complex social act. Smiling is presented as facilitating individual health and wellbeing, but the value placed on smiling raises questions about structural conditions acting on the body. While smiling has been considered sociologically, psychologically and historically, we argue that further exploration of the embodied smile offers fruitful avenues for future research. This article attempts to advance understanding of the smile and its importance by: (I) Bringing together literature on smiling as a social act and smiling as embodied. (II) Systematically identifying key themes, which recognise sociological insights and the relevance of oral health. (III) Pointing to useful directions for future sociological research into smiling. In this article, we review literature on body techniques; impression management and social interaction; gender, race and smiling; and emotional, aesthetic and affective labour. We move on to embodiment, considering the mouth as a body project and in relation to the ageing body, before reflecting on the significance of oral health and dentistry. We highlight future directions for sociological research on smiling, building on eight interrelated and cross-cutting themes: norms and expectations, aesthetic ideals, self and identity, health and wellbeing, body work, commodification and labour, inclusion and exclusion and resistance.

Proximal radio-ulna joint but not posterolateral instability is present in SMILE patients compared to controls.

INTRODUCTION: The elbow joint is stabilized laterally by a complex of bony and ligamentous structures, such as the lateral ulnar collateral ligament (LUCL) and radial lateral collateral ligament (RLCL). Pathogenesis of many elbow conditions like SMILE (Symptomatic Minor Instability of the Lateral Elbow) is based on ligamentous incompetency. The aim of this study is to measure ligament elongation in SMILE patients and determine the correlation with the development of this pathological condition. MATERIALS AND METHODS: Twenty-eight patients were included in this study: half of them were operated for suspected SMILE while the others were affected by other elbow diseases. All the patients underwent elbow arthroscopy. During this procedure, four parameters were analyzed: Annular Drive Through (ADT), Ulnar-humeral Stressed Distance (UHSD) at 45° and 30° of flexion, and Loose Collar Sign (LCS). A dedicated arthroscopic mini-spreader introduced through an arthroscopic portal was used to do measurements. RESULTS AND DISCUSSION: A statistically significative difference was found for LCS (p value 0,0003) and ADT (p value 0,000002). UHSD at 30° and 45° elbow flexion was slightly higher in SMILE patients, but not significantly. Progressive stretching of the RLCL and annular ligament may lead to their elongation, allowing a pathological antero-posterior shifting of the radial head and a lower congruence between the inner surface of the annular ligament and the radial head cartilage, resulting in proximal radio-ulnar instability. CONCLUSIONS: RLCL and annular ligament are elongated in SMILE patients compared to controls, causing instability of the proximal radio-ulnar joint (PRUJ) and confirming that ligament incompetency is involved in SMILE condition.

Smile dynamics: A comparative study of Fijians and NZ Europeans.

BACKGROUND: The Fijian 'Bula Smile' is often described as the world's friendliest; however, its description remains anecdotal. OBJECTIVE: This study aimed to describe and compare the dynamics of Fijians' smiles with those of New Zealand Europeans. METHODS: An observational study was conducted on two ethnic groups, Fijians (FJ; N = 23) and New Zealand Europeans (NZ; N = 23), age- and gender-matched. All participants were asked to watch amusing videos, and their reactions were video recorded. The videos were analysed by software to assess the frequency, duration, intensity and genuineness of smiling episodes. Based on the Facial Action Coding System, Action Unit 6 (AU6-cheek raiser), Action Unit 12 (AU12-lip corner puller) and Action Unit 25 (AU25-lips apart) were assessed. Data were analysed by generalised linear models after adjusting for personality traits. RESULTS: Fijians smiled longer than New Zealand Europeans (+19.9%; p = .027). Mean intensity of AU6 (+1.0; 95%CIs = 0.6-1.5; p < .001), AU12 (+0.5; 95%CIs = 0.1-0.9; p = .008) and AU25 (+22.3%; 95%CIs = 7.3%-37.3%; p = .005) were significantly higher in FJ group than the NZ group. CONCLUSION: Smiling features of Fijians and New Zealanders showed objective differences, the most distinctive being a higher activation of the Duchenne's marker (AU6) in the Fijian group, which is regarded as a sign of smile genuineness.

What comes first: teeth or face? Recommendations for an interdisciplinary collaboration between facial esthetic surgery and dentistry.

OBJECTIVE: The aim of the present study was to provide recommendations in order to facilitate communication between dental professionals and surgeons who are collaborating in the field of dentofacial esthetics. CLINICAL CONSIDERATIONS: Smile esthetics are beyond the scope, both of the surgeons who are collaborating with facial esthetics and of the dentists, as a wide range of treatment options from both sides is available. It can be difficult for the surgeon or the dentist that first comes in contact with the patient to conduct an individualized global treatment plan, in order to find out how the various phases of the treatment can be sequenced, as a workflow for an efficient interaction between facial surgery and dentistry still does not exist in the scientific literature. CONCLUSIONS: Facial cosmetic procedures and dental treatment have to be planned as individual elements of the whole dentofacial esthetic rehabilitation. The treatment has to be initiated with the design of the smile and the intraoral mock-up, followed by the required surgical interventions, and to be finished with the delivery of the definitive dental restoration. CLINICAL SIGNIFICANCE: Dentofacial esthetics require comprehensive communication between surgeons and dentists. Following the proposed recommendations, an individualized interdisciplinary treatment plan can be conducted, defining the role of each specialty.

The impact of dental midline angulation towards the facial flow curve on the esthetics of an asymmetric face: Perspective of laypeople and orthodontists.

PURPOSE: The objective of the present article was to evaluate the impact of dental midline angulation in asymmetrical faces. MATERIALS AND METHODS: A full-portrait image was used to create a set of digitally modified images with a different degree of facial asymmetry, towards the right and the left side of the face respectively. Half of the images were designed with an equivalent angulation of the dental midline in respect to the curve of the lower third of the face and half of them without. Through a web survey, 250 laypeople and 250 orthodontists were asked to assess the attractiveness of each image separately. RESULTS: As the asymmetry of the face was increased, facial attractiveness was further decreased both for laypersons and orthodontists. For each one of the modified images, when the dental midline was following the curve that was formed from the inclination of the simulated asymmetry of the face, the smile attractiveness scores were significantly higher compared to a straight dental midline. CONCLUSION: Facial asymmetries derived from the inclination of the nose, the chin and the commissural line of the lips can significantly affect the smile attractiveness. An orientation of the dental midline towards the facial asymmetry in order to follow the facial curve, can be beneficial for the smile attractiveness compared to a perpendicular to the face dental midline. During the design of a smile, clinicians have to take into consideration deviations in facial midline, in order their restorations to be in harmony with the rest of the face. CLINICAL SIGNIFICANCE: During the design of a smile, clinicians have to take into consideration deviations in the facial midline, in order their restorations to be in harmony with the rest of the face.

The influence of different tooth proportions obtained using digital smile design on the perception of smile esthetics.

OBJECTIVE: The aim of this study is to examine the effect of designs using different esthetic dental proportions made with a digital smile design program on the esthetic perception of individuals of different ages, genders and educational statuses. MATERIALS AND METHODS: Different smile designs were made on facial photos taken of a female and male model using a smile design program. Four different dental proportions (golden proportion [GPR], golden percentage [GPE]), Preston proportion [P] and recurring esthetic dental proportion [RED]) and two different tooth shapes (oval and square) were used. Images with 16 different smile designs were presented to 4th and 5th-year students of a faculty of dentistry, dentists, specialist dentists and laypersons for scoring. RESULTS: The gender of the participants did not affect the scores given (p > 0.05), and participants over the age of 30 and lay people had higher scores (p < 0.05). The GPR design was scored lower than RED when all designs were subdivided by tooth shape and gender (p < 0.001). CONCLUSIONS: The esthetic perceptions of people of different ages and dentistry education levels may differ from each other. Using the GPR when designing a digital smile may not be suitable for both genders. CLINICAL SIGNIFICANCE: If esthetic dental proportions are to be utilized when designing a smile, it may be more appropriate to use the P and RED proportions instead of the GPR. In addition, if the patients whose smiles will be designed are young and have received dental education, it should be considered that their esthetic expectations may be high. Trial registration ClinicalTrials.gov Identifier: NCT0567043.

An interdisciplinary treatment to reshape upper anterior displaced teeth by using dynamic occlusal recording with an intraoral scanner.

OBJECTIVE: This article describes an interdisciplinary treatment that helped a patient with displaced upper anterior teeth. A gingivectomy, root canal therapies, digital smile design, digital wax-up, and guided tooth preparations were applied. CLINICAL CONSIDERATIONS: A patient with pathologically migrated teeth asked for treatment without orthodontic involvement due to a primary failed orthodontic treatment history. A smile photo was taken and superimposed with the dentition in a CAD software to accomplish a digital smile design. The jaw movements were recorded with two different methods, a mechanical articulator and an intraoral scanner with Patient-Specific-Motion function. The occlusal contacts during protrusive and lateral movements were compared and the digital wax-up was designed according to the later occlusal data. An aesthetic crown lengthening and pre-op root canal treatment were carried out in advance accordingly. After guided tooth preparation with a silicone index, the final fixed restorations were manufactured and cemented. A 2-year follow-up showed that our prosthesis functions well. CONCLUSIONS: This clinical report revealed that an intraoral scanner with Patient-Specific-Motion function can effectively record individual dynamic occlusal patterns and these data can be integrated into the CAD/CAM process to enhance the fulfillment of clinical requirements. CLINICAL SIGNIFICANCE: This clinical procedure with a 2-year follow-up demonstrated that a prosthodontic-based interdisciplinary treatment of pathologically migrated teeth using dynamic occlusal recording with an intraoral scanner could achieve satisfactory esthetics in a relatively short treatment period. The Patient Specific Motion module may be used to record a personalized functional movement and the data can be integrated into the design process of the final restorations.

Isolation and Structure Determination of New Pyrones from Dictyostelium spp. Cellular Slime Molds Coincubated with Pseudomonas spp.

Cellular slime molds are excellent model organisms in the field of cell and developmental biology because of their simple developmental patterns. During our studies on the identification of bioactive molecules from secondary metabolites of cellular slime molds toward the development of novel pharmaceuticals, we revealed the structural diversity of secondary metabolites. Cellular slime molds grow by feeding on bacteria, such as Klebsiella aerogenes and Escherichia coli, without using medium components. Although changing the feeding bacteria is expected to affect dramatically the secondary metabolite production, the effect of the feeding bacteria on the production of secondary metabolites is not known. Herein, we report the isolation and structure elucidation of clavapyrone (1) from Dictyostelium clavatum, intermedipyrone (2) from D. magnum, and magnumiol (3) from D. intermedium. These compounds are not obtained from usual cultural conditions with Klebsiella aerogenes but obtained from coincubated conditions with Pseudomonas spp. The results demonstrate the diversity of the secondary metabolites of cellular slime molds and suggest that widening the range of feeding bacteria for cellular slime molds would increase their application potential in drug discovery.

The Scalloped Surgical Guide as an Alternative to Flat Bone Reduction Guide in Full-Arch Implant Restoration.

The goal of this clinical report was to present an alternative to traditional flat bone reduction guides, using a custom-designed 3-dimensional (3D)-printed guide according to the future gingival margin of the planned dentition. A 61-year-old woman with concerns regarding her smile appearance was presented. The initial examination revealed excessive gingival show accompanied by excessive overjet. The dentition was in a failing situation. The proposed treatment plan, relying on the sufficient amount of bone and keratinized tissue, consisted of recontouring of the alveolar ridge and gingiva and placement of 6 implants and an FP-1 prosthesis after extraction of all remaining maxillary teeth. Digital smile design was completed, and a fully digitally guided surgery was planned. This consisted of using 3 surgical guides, starting with the fixation pin guide, continuing with the scalloped hard- and soft-tissue reduction guide, and finally the implant placement template. Following the surgery, the patient received a temporary restoration, and on the 4-month follow-up, a new polymethyl meta-acrylate temporary prosthesis was delivered. The patient's 7-month follow-up is presented in the article. The report of this triple-template guided surgery indicated that digital 3D planning is a considerably predictable tool to properly establish and evaluate future occlusal plane, smile line, and lip support. Scalloped guides seem to be an excellent alternative to conventional bone reduction guides since they require less bone removal and improve patient comfort during surgery.

Influence of education level and gender of dental students on perception of dental aesthetics.

BACKGROUND: Fulfilling aesthetic norms is an imperative of modern society. Accordingly, aesthetics has found its important role in dental medicine. The aim was to study whether there is a difference in the perception of tooth shade change and anatomical variations of anterior maxillary teeth among dental students depending on the level of education, gender, and experience in assisting in a dental office. METHODS: The research was conducted among dental students via the Google Forms platform. Students evaluated the aesthetic acceptability of a smile on the unaltered, reference photograph (RP) and on the other 28 photographs in which the tooth shade (lighter and darker teeth), length (shortened central incisors, elongated, and beveled lateral incisors, elongated canines) and position (atypical and typical rotations and diastemas) of the upper maxillary teeth were altered by digital manipulation. The 1-10 assessment scale was used. Statistical analysis comprised one-way Kolmogorov-Smirnov test, X2 tests, t-test, and 3-way MANOVA. RESULTS: In the research 208 students participated, 113 were preclinical students, 104 assisted in dental office and 175 were females. There were no significant effects of gender regarding length and position modifications (p > .05), while women were stricter in evaluation of lighter shade (p < .05). Clinical students were stricter in evaluating all manipulated photographs (MP) except those towards darker shade modifications, while assisting in a dental office or having a dentist in close family showed no significant effects (p > .05). CONCLUSIONS: With a higher level of targeted academic education, dental students sharpen their ability to notice deviations from the aesthetic norms of a smile.

Smile aesthetics in Pakistani population: dentist preferences and perceptions of anterior teeth proportion and harmony.

BACKGROUND: This study aimed to evaluate dentist perceptions of attractive smiles in the Pakistani population, considering different dental proportions. METHODS: Maxillary casts and digital images were used to create symmetrical representations of anterior teeth. dentists' preferences for good and bad teeth proportions, width/height ratios, and various dental proportions (golden, recurring esthetic dental (RED), golden percentage, Preston, and local/observed) were assessed using one sample and paired t-test. The Chi-square test was used to determine the gender disparities and factors affecting smile attractiveness. A p-value of ≤ 0.05 was taken as significant. RESULTS: The RED proportion emerged as the preferred choice for normal-sized teeth, with specialists and general dentists favoring it over the golden proportion. For tall teeth, the golden proportion was predominantly preferred. The golden percentage received limited preference for aesthetic smile construction. CONCLUSIONS: The smiles created using the principles of RED proportion were opted as the most attractive by local dentists. Factors such as tooth arrangement, color, and midline were highlighted as essential considerations in aesthetic smile construction.

A comparative study of the use of digital technology in the anterior smile experience.

OBJECTIVES: this study aims to compare the clinical outcomes of traditional and digital crown extension guides in the aesthetic restoration of anterior teeth. Additionally, the study will analyze the differences in the results of various digital crown extension guides in anterior aesthetic restorations. METHODS: Sixty-two patients who required aesthetic restoration of their anterior teeth were selected for this study. The patients had a total of 230 anterior teeth and were randomly divided into three groups: a control group of 22 cases who received diagnostic wax-up with pressure film, an experimental group 1 of 20 cases who received 3D printed digital models with pressure film, and an experimental group 2 of 20 patients who received digital dual-positioning guides. The control group had a total of 84 anterior teeth, experimental group 1 had 72 anterior teeth, and experimental group 2 had 74 anterior teeth. The study compared three methods for fabricating crown extension guides: the control group used the diagnostic wax-up plus compression film method, while experimental group 1 used compression film on 3D printed models and experimental group 2 used 3D printed digital dual-positioning crown extension guides. After the crown lengthening surgery, the control group patients wore DMG resin temporary crown material for gingival contouring, while the experimental group patients wore 3D printed resin temporary crowns for the same purpose. The patients were followed up in the outpatient clinic after wearing temporary crowns for 1 month, 3 months, and 6 months, respectively. The clinical results were evaluated in terms of marginal fit, red aesthetic index, and white aesthetic index. RESULTS: Based on the statistical analysis, the experimental group required significantly fewer follow-up visits and less time for guide design and fabrication compared to the control group. Additionally, the surgical time for the experimental group was significantly shorter than that of the control group. During the postoperative period between the 1st and 3rd month, the PES index scores for the marginal gingival level, proximal, and distal mesiodistal gingival papillae of the experimental group showed a trend of superiority over those of the control group. By the 6th month, the marginal gingival level exhibited a significant difference between the experimental and control groups. The experimental group demonstrated superior results to the control group in terms of shape, contour, and volume of the teeth, color, surface texture, and transparency of the restorations, and features during the 1st and 3rd postoperative months. In the 6th month, the comparative results indicated that the experimental group continued to exhibit superior outcomes to the control group in terms of the shape, color, surface texture, and transparency of the restorations, as well as the characteristics of the teeth. Additionally, the experimental group demonstrated significantly fewer gingival alterations than the control group at 1 month, 3 months, and 6 months post-procedure, with this difference being statistically significant. Furthermore, the combination of 3D printing technology and restorative techniques was utilized, resulting in consistent patient satisfaction. CONCLUSION: Digitalisation plays an important role in anterior aesthetic restorations. The use of digital technology to manage the entire process of anterior cosmetic restorations can improve restorative results, reduce the number of follow-up appointments, shorten consultation time, and achieve better patient satisfaction.

Treatment of excessive gingival display using conventional esthetic crown lengthening versus computer guided esthetic crown lengthening: (a randomized clinical trial).

BACKGROUND: Surgical guides have been proposed in an attempt to reach more predictable outcomes for esthetic crown lengthening. The objective of the present study was to evaluate the effectiveness of esthetic crown lengthening using 3D-printed surgical guides in the management of excessive gingival display due to altered passive eruption type 1B. MATERIALS AND METHODS: Sixteen patients diagnosed with altered passive eruption type 1B, were divided into two groups. In the control group, the procedure was carried out conventionally, and in the study group, a dual surgical guide was used. The parameters of wound healing (swelling, color, probing depth, bleeding index, and plaque index), pain scores, gingival margin stability, and operating time were assessed at 1 week, 2 weeks, 3 months, and 6 months postoperatively. RESULTS: There was no statistically significant difference in terms of wound healing, pain scores, and gingival margin stability between both groups at different time intervals (P = 1), however, there was a statistical difference between both groups in terms of operating time with the study group being significantly lower (P < 0.001). CONCLUSION: Digitally assisted esthetic crown lengthening helps shorten the operating time and reduces the possibility of human errors during the measurements. This will be useful in helping practitioners achieve better results. PRACTICAL IMPLICATIONS: The conventional method remains to be the gold standard. However, shorter operating time and lower margins for errors will help reduce costs as the chair side time is reduced as well as the possibility for a second surgery is lower. This will improve patient satisfaction as well.

Perception of maxillary incisor inclination and its correlation with dental cephalometric measurements.

OBJECTIVE: To correlate the clinical perception of maxillary incisor inclination from photographs of the smiling face with cephalometric measurements, using conventional incisor axis reference points and crown reference points. DESIGN: Cross-sectional study. SETTING: Department of Orthodontics, School of Dentistry, University of Lisbon (Portugal). PARTICIPANTS: Eight orthodontists. METHODS: The perception of maxillary incisor inclination of 47 female patients (mean age 23.4 ± 1.5 years) was evaluated by eight orthodontists. The participants' photographs (smiling frontal, smiling three-quarter and smiling profile) were shown to each assessor and a continuous visual analogue rating scale was used to assess the perception of maxillary incisor inclination. Pearson's correlation and linear regression were calculated between each cephalometric measurement and the perception of incisor inclination. RESULTS: Anatomical crown inclination measurements U1ac-FH (r = 0.854; P < 0.01) and U1ac-SN (r = 0.845; P < 0.01) had the highest correlation values with the assessors' perception of maxillary incisor inclination. Conventional incisor axis measurements showed the lowest correlation values (r = 0.668-0.756). CONCLUSION: Cephalometric measurements of the labial surface of the anatomical crown of the maxillary incisors showed the strongest correlations with the clinical perception of maxillary incisor inclination from photographs. For optimal aesthetics, the inclination of the labial surface of maxillary incisor crown should be evaluated.

Artificial intelligence and smile design: An e-Delphi consensus statement of ethical challenges.

PURPOSE: Smile design software increasingly relies on artificial intelligence (AI). However, using AI for smile design raises numerous technical and ethical concerns. This study aimed to evaluate these ethical issues. METHODS: An international consortium of experts specialized in AI, dentistry, and smile design was engaged to emulate and assess the ethical challenges raised by the use of AI for smile design. An e-Delphi protocol was used to seek the agreement of the ITU-WHO group on well-established ethical principles regarding the use of AI (wellness, respect for autonomy, privacy protection, solidarity, governance, equity, diversity, expertise/prudence, accountability/responsibility, sustainability, and transparency). Each principle included examples of ethical challenges that users might encounter when using AI for smile design. RESULTS: On the first round of the e-Delphi exercise, participants agreed that seven items should be considered in smile design (diversity, transparency, wellness, privacy protection, prudence, law and governance, and sustainable development), but the remaining four items (equity, accountability and responsibility, solidarity, and respect of autonomy) were rejected and had to be reformulated. After a second round, participants agreed to all items that should be considered while using AI for smile design. CONCLUSIONS: AI development and deployment for smile design should abide by the ethical principles of wellness, respect for autonomy, privacy protection, solidarity, governance, equity, diversity, expertise/prudence, accountability/responsibility, sustainability, and transparency.

Determining the widths of the maxillary anterior teeth for esthetics: comparison of the Mondelli and Albers formulas, esthetic proportion, and golden ratio.

The purpose of this study was to compare various formulas for idealized proportions of the maxillary incisors to the actual dimensions of natural teeth. The Mondelli formula 1 (MF1), Mondelli formula 2 (MF2), Albers formula (AF), esthetic proportion (EP) for width and height of anterior teeth, and golden ratio (GR) were calculated for a total of 50 dental students (30 women and 20 men) who participated in the study. The following measurements were obtained directly in the participant's mouth with a digital caliper: the mesiodistal and incisogingival dimensions of the maxillary central incisors, lateral incisors, and canines; the intercanine distance; and the smile width. The participants were photographed, and the smile width was also measured on the photographs. The MF1 and MF2 were each calculated twice, using both direct measurements and photographic measurements. The projected central incisor widths calculated using the MF1, MF2, and AF were compared among themselves and against the actual measurements using analysis of variance and Fisher test for multiple comparisons (α = 0.05). The EP and GR were analyzed using descriptive statistics. There was a statistically significant difference between all of the widths projected by the formulas and the actual widths of the central incisors (P < 0.05). Whether calculated from a direct or a photographic measurement, the incisor widths projected by the MF1 and MF2 were statistically similar to each other (P > 0.05). The EP values were similar to those reported in the literature. Only 2% of the participants had an incisor width ratio (central incisor/lateral incisor) that matched the GR of 1.618, while 86% fell within the range of 1.2 to 1.4. Overall, the proportions calculated with the MF1, MF2, AF, EP, and GR did not exactly match the actual dimensions of natural teeth. The formulas and the proportions available in the literature can assist in esthetic planning, but the individual characteristics of each patient and expertise of the dentist should guide treatment for each case.