Eco-Friendly One-Pot Supramolecular-Assembly of P-N Flame Retardant for Fire-Safe Epoxy Resin.

Flame retardant treatment of epoxy resins (EP) to reduce their flammability for extending their range of applications attracts considerable attention. However, the synthesis process of conventional flame retardants is complicated and involves organic hazardous solvents. Meanwhile, how to ensure both the flame-retardant and mechanical properties is a long-standing and actual difficult problem. In this work, a supramolecular flame retardant (named ATPFR) is facilely created by one-pot reaction, using cheap and accessible raw materials in an ecologically benign aqueous solvent. ATPFR is applied to improve the fire safety of EP. With only 5 wt% ATPFR addition, EP can reach the limiting oxygen index of 28.5% and the UL-94 V-0 rating with a significant "blow-out effect." The cone calorimetry test reveals that the EP thermoset with 5 wt% ATPFR has a 75.8% reduction in the peak heat release rate (p-HRR) and a 67.3% reduction in the peak smoke production rate (p-SPR), respectively, compared with the pure EP. Additionally, EP composites with the small amount of ATPFR exhibit a slight decrease and maintain good mechanical properties. Therefore, the facile synthesis and application of this supramolecular flame retardant provide a reliable way for the construction of polymer materials with environment-friendly and effective flame-retardant system.

A Novel Anderson-Type POMs-Based Hybrids Flame Retardant for Reducing Smoke Release and Toxicity of Epoxy Resins.

Smoke emission and smoke toxicity have drawn more attention to improving the fire safety of polymers. In this work, a polyoxometalates (POMs)-based hybrids flame retardant (P-AlMo6 ) epoxy resin (EP) is prepared with toxicity-reduction and smoke-suppression properties via a peptide coupling reaction between POMs and organic molecules with double DOPO (bisDOPA). It combines the good compatibility of the organic molecule and the superior catalytic performance of POMs. Compared to pure EP, the glass transition temperature and flexural modulus of EP composite with 5 wt.% P-AlMo6 (EP/P-AlMo6 -5) are raised by 12.3 °C and 57.75%, respectively. Notably, at low flame-retardant addition, the average CO to CO2 ratio (Av-COY/Av-CO2 Y) is reduced by 33.75%. Total heat release (THR) and total smoke production (TSP) are lowered by 44.4% and 53.7%, respectively. The Limited Oxygen Index (LOI) value achieved 31.7% and obtained UL-94 V-0 rating. SEM, Raman, X-ray photoelectron spectroscopy, and TG-FTIR are applied to analyze the flame-retardant mechanism in condensed and gas phase. Outstanding flame retardant, low smoke toxicity properties are attained due to the catalytic carbonization ability of metal oxides Al2 O3 and MoO3 produced from the breakdown of POMs. This work advances the development of POMs-based hybrids flame retardants with low smoke toxicity properties.

Preparation of Naphthalene-Based Flame Retardant for High Fire Safety and Smoke Suppression of Epoxy Resin.

One of the current challenges in the development of flame retardants is the preparation of an environmentally friendly multi-element synergistic flame retardant to improve the flame retardancy, mechanical performance, and thermal performance of composites. This study synthesized an organic flame retardant (APH) using (3-aminopropyl) triethoxysilane (KH-550), 1,4-phthalaadehyde, 1,5-diaminonaphthalene, and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) as raw materials, through the Kabachnik-Fields reaction. Adding APH to epoxy resin (EP) composites could greatly improve their flame retardancy. For instance, UL-94 with 4 wt% APH/EP reached the V-0 rating and had an LOI as high as 31.2%. Additionally, the peak heat release rate (PHRR), average heat release rate (AvHRR), total heat release (THR), and total smoke produced (TSP) of 4% APH/EP were 34.1%, 31.8%, 15.2%, and 38.4% lower than EP, respectively. The addition of APH improved the mechanical performance and thermal performance of the composites. After adding 1% APH, the impact strength increased by 15.0%, which was attributed to the good compatibility between APH and EP. The TG and DSC analyses revealed that the APH/EP composites that incorporated rigid naphthalene ring groups had higher glass transition temperatures (Tg) and a higher amount of char residue (C700). The pyrolysis products of APH/EP were systematically investigated, and the results revealed that flame retardancy of APH was realized by the condensed-phase mechanism. APH has good compatibility with EP, excellent thermal performance, enhanced mechanical performance and rational flame retardancy, and the combustion products of the as-prepared composites complied with the green and environmental protection standards which are also broadly applied in industry.

Preeminent Flame-Retardant and Smoke Suppression Properties of PCaAl-LDHs Nanostructures on Bamboo Scrimber.

Bamboo scrimber is widely used in interior decoration, architecture, and many other fields. However, it has caused huge security risks due to its inherent flammability and easy-to-produce toxic volatiles after combustion. In this work, the bamboo scrimber with superior flame retardant and smoke suppression properties was produced via the coupling of phosphocalcium-aluminum hydrotalcite (PCaAl-LDHs) with bamboo bundles. The results demonstrated that the flame-retardant bamboo scrimber (FRBS) heat release rate (HRR) and total heat release (THR) were, respectively, reduced by 34.46% and 15.86% compared with that of untreated bamboo scrimber. At the same time, the unique multi-layer structure of PCaAl-LDHs effectively slowed down the release rate of flue gas by extending its escape path. Cone calorimetry showed that the total smoke emissions (TSR) and specific extinction area (SEA) of FRBS were, respectively, reduced by 65.97% and 85.96% when the concentration of the flame retardant was 2%, which greatly developed the fire safety of the bamboo scrimber. This method not only improves the fire safety of bamboo scrimber but can also be expected to broaden its use scenarios.

Enhancing Flame Retardancy and Smoke Suppression in Epoxy Resin Composites with Sulfur-Phosphorous Reactive Flame Retardant.

The presence of massive amounts of toxic volatiles and smoke during combustion is a very serious problem facing epoxy resin (EP) composites. Therefore, flame retardants (FRs) can simultaneously enhance flame retardancy and reduce the release of smoke and fatal gases. Herein, a novel sulfur-phosphorous reactive flame retardant (SPMS) was synthesized for epoxy resin. The high efficiency of smoke suppression and flame retardancy of the EP/SPMS-APP hybrid was investigated using a cone calorimeter, a vertical burning test, and limited oxygen index measurements. Compared with those of pure EP, the composite with 20 wt% SPMS-APP reduced the peak heat release rate (pHRR), the peak smoke production rate (SPR), and total smoke production rate (TSR) by 82%, 94%, and 84%, respectively. The results showed a remarkable suppressed effect of alleviating the fire hazard of EP using a sulfur-phosphorus flame retardant.

Comparative Study of M(â ¡)Al (M=Co, Ni) Layered Double Hydroxides for Silicone Foam: Characterization, Flame Retardancy, and Smoke Suppression.

To compare the different actions of the two representative transition metal cations of Co2+ and Ni2+ in layered double hydroxides (LDHs), CoAl-LDH and NiAl-LDH intercalated with CO32- were synthesized, and the chemical structures, microstructures, and surface areas thereof were successfully characterized. Then, the two LDHs were utilized as flame retardants and smoke suppressants for silicone foam (SiF). The densities, flame retardancy, smoke suppression, thermal stabilities, and compressive strengths of the two SiF/LDHs nanocomposites were investigated. The introduction of LDHs slightly decreased the density of SiF due to the catalytic actions of Co and Ni during the foaming process of SiF. With respect to the flame retardancy, the addition of only 1 phr of either CoAl-LDH or NiAl-LDH could effectively improve the limiting oxygen index of SiF from 28.7 to 29.6%. Based on the results of vertical flame testing and a cone calorimeter test, the flame retardancy and fire safety of the SiF were effectively enhanced by the incorporation of LDHs. In addition, owing to the good catalytic action and large specific surface area (NiAl-LDH: 174.57 m2 g-1; CoAl-LDH: 51.47 m2 g-1), NiAl-LDH revealed higher efficiencies of flame retardancy and smoke suppression than those of CoAl-LDH. According to the results of energy-dispersive X-ray spectroscopy, Co and Ni participated in the formation of protective char layers, which inhibited the release of SiO2 into the gas phase. Finally, the influences on the thermal decomposition and compressive strength for SiF resulting from the addition of LDHs are discussed.

Linear polydichlorophosphazene and Ti3C2Tx MXene nanohybrids: Synthesis and application to epoxy resin to improve the fire safety and mechanical properties.

Enhancing the fire safety of epoxy resins (EPs) typically requires a significant amount of flame retardants, which often results in considerable degradation of their mechanical properties. To address this issue, a novel flame retardant known as PDCP@DPA@MXene was synthesized and integrated into EP to achieve notable improvements in flame retardancy, smoke suppression, and mechanical strength. By incorporating 1.5 wt% PDCP@DPA@MXene, the impact strength, tensile strength, and elongation at break of the resulting PDM-1.5 %/EP composite reached 12.1 kJ/m2, 57.4 MPa, and 13.0, respectively, reflecting enhancements of 63.5 %, 18.4 %, and 17.1 % compared to the pure EP. The enhancement in tensile strength may be attributed to the high rigidity of Ti3C2Tx MXene, which reinforces the EP matrix. Additionally, the intertwined structure of PDCP@DPA@MXene chains effectively mitigates material fracturing and absorbs impact forces, thus toughening the EP. The presence of phosphorus, nitrogen, and titanate in PDCP@DPA@MXene contributes to the formation of a more compact char layer. The PDM-1.5 %/EP sample achieved a V-0 rating in the vertical UL-94 test and exhibited a high limiting oxygen index of 32.0. Furthermore, the sample containing 2 wt% PDCP@DPA@MXene showed a significant reduction in peak heat release rate (p-HRR) and total heat release (THR), recording values of 689 kW/m2 and 71.9 MJ/m2, which are decreases of 45.1 % and 26.9 %, respectively, compared to pure EP. Additionally, the incorporation of PDCP@DPA@MXene led to a reduction in CO production. These flame-retarded EPs demonstrate strong potential for various applications due to their elevated glass transition temperature and robust thermal stability.

Developing flame retardant, smoke suppression and self-healing polyvinyl alcohol composites by dynamic reversible cross-linked chitosan-based macromolecule.

With the increasing threat of white pollution to the public health and ecosystem, functional materials driven by green and sustainable biological macromolecule are attracting considerable attention. Inspired by the double-helix structure of DNA, a P-B-N ternary synergistic chitosan-based macromolecule (PBCS) was constructed to prepare flame retardant, smoke suppression and self-healing polyvinyl alcohol composite (PVA@PBCS) via dynamic reversible interactions. The limiting oxygen index value of PVA@PBCS increased from 19.6 % to 28.7 %, whereas the peak heat release rate and total heat release decreased by 47.04 % and 43.37 %, respectively. Besides, the peak smoke production rate and total smoke production of PVA@PBCS also decreased by 45.31 % and 54.98 %. With the presence of borate ester-based covalent and multiple hydrogen bonds, the tensile strength and elongation at break of PVA@PBCS increased by 19.50 % and 16.85 % compared to the control sample, and the healing efficiency for tensile strength and elongation at break was as high as 93.86 % and 90.57 %, respectively. This work developed an eco-friendly and effective scenario for fabricating flame retardant and smoke suppression PVA materials, stimulating the substantial potential of chitosan-based biomacromolecule and dynamic reversible cross-linked tactics in self-healing field.

Enhancing Flame Retardancy and Smoke Suppression in EPDM Rubber Using Sepiolite-Based Systems.

The burning of Ethylene-Propylene-Diene Monomer (EPDM) rubber generates substantial smoke, posing a severe threat to the environment and personal safety. Considering the growing emphasis on safety and environmental protection, conventional non-smoke-suppressing flame retardants no longer satisfy the present application requirements. Consequently, there is an urgent need to develop a novel flame retardant capable of suppressing smoke formation while providing flame retardancy. Sepiolite (SEP), a porous silicate clay mineral abundant in silica and magnesium, exhibits notable advantages in the realm of flame retardancy and smoke suppression. This research focuses on the synthesis of two highly efficient flame-retardant smoke suppression systems, namely AEGS and PEGS, using Enteromorpha (EN), graphene (GE), sepiolite (SEP), ammonium polyphosphate (APP), and/or piperazine pyrophosphate (PPAP). The studied flame-retardant systems were then applied to EPDM rubber and the flame-retardant and smoke suppression abilities of EPDM/AEGS and EPDM/PEGS composites were compared. The findings indicate that the porous structure of sepiolite plays a significant role in reducing smoke emissions for EPDM composites during combustion.

The Effect of Expanded Vermiculite on the Fire Resistance of Waterborne Acrylic Coatings.

Due to their ability to prevent or slow the spread of fires, fire-retardant coatings are utilized as the main means of fire protection for steel structures, combining easy application and high economic efficiency. This study investigates the effects of the particle size and dosage of expanded vermiculite (EV) on the fire resistance and application performance of coatings. Ammonium polyphosphate, melamine, and pentaerythritol were used as intumescent fire-retardant systems, along with waterborne hydroxyl-modified acrylic resins as the film-forming substances. The properties of fire resistance coatings were tested via scanning electron microscope (SEM), X-ray diffractometry (XRD), thermogravimetric analysis (TGA), limiting oxygen index (LOI), and cone calorimetry. The excellent fire performance of the coatings with 3 wt.% 300-mesh EV was proven, exhibiting a relative expansion of 30.43 times. Moreover, the surface structure of the charcoal layer was dense. The total smoke production (TSP) and smoke concentration (TSR) were only 0.18 m2 and 0.25 m2/m2.

Significantly suppressing CO release achieved by the catalysis effect of nanostructured rare earth/manganese oxides: Application in flame retardant thermoplastic polyurethane.

There is significant smoke and toxic volatiles generated from the combustion of thermoplastic polyurethane (TPU), which has compromised its application and posed a significant threat to human life. Here, the hydrothermal-citrate complexation method synthesised the rare earth Mn-based composite catalyst and blended with TPU to mitigate smoke release and toxic gas generation during TPU combustion. The results demonstrate that the inclusion of 3 wt% Mn-La and Mn-Ce catalysts into TPU leads to a 41.3% and 33.6% decrease in maximum smoke density (Ds max), respectively, along with a 52.4% and 50.5% reduction in peak CO production rate (pCOPR). The mechanism of rare earth Mn-based catalyst-based smoke suppression and toxicity reduction in TPU is explained at a microscopic scale based on density functional theory (DFT) research: the introduction of catalyst bolsters the adsorption of O2 and CO on the surface of TPU nanocomposites and facilitates the oxidation of CO. Additionally, it can expedite the formation of dense carbon layers and impede heat and mass transfer. The TPU nanocomposites exhibit excellent flame retardancy and effective smoke suppression. A feasible strategy for manufacturing fire-safety TPU nanocomposites with favorable comprehensive properties is proposed.

Single overall 'H-shaped' multifunctional compound achieves fire safety, durability, enhanced strength, and smoke suppression of cotton fabrics.

Challenges currently faced by phosphorus-based flame retardants for cotton fabrics include reduced fabric strength after treatment, high smoke release during combustion, formaldehyde release from commercial phosphorus-based flame retardants and poor flame retardant durability after treatment. In the present work, a P/N/B synergistic flame retardant TBST is synthesized using phosphoric acid, cyanuric acid, boric acid, pentaerythritol, etc. The phosphorus­nitrogen­boron atomic ratio is 2:3:1, and it is successfully prepared on cotton fabric to prepare TBST/Cotton. When the weight gain rate is 29.8 %, the LOI value is 41.6 ± 0.3 %, indicating that TBST/Cotton has excellent flame retardant performance. At the same time, in the vertical flame test, the length of residual carbon is 5.6 cm. In addition, the THR and HRR are reduced by 58.4 % and 91.9 % respectively compared to Cotton, indicating that TBST/Cotton has excellent combustion performance. In addition, compared to the residual carbon content of Cotton at 710 °C, the residual carbon content of TBST/Cotton in nitrogen increased by 27.79 %. For a 30 % increase in weight, the increase in longitudinal mechanical strength is 23.1 %. Inferred the decomposition mechanism and flame retardant mechanism of TBST/Cotton. TBST/Cotton has the advantages of good flame retardant durability and enhanced mechanical properties, and the reinforcement mechanism of TBST has been speculated.

Simultaneously Flame Retarding and Toughening of Epoxy Resin Composites Based on Two-Dimensional Polyhedral Oligomeric Silsesquioxane/Polyoxometalate Supramolecular Nanocrystals with Ultralow Loading.

For industrial practical applications, it is difficult to simultaneously endow epoxy resin (EP) composites with superior flame retardancy, smoke suppression, toughness, and low-dielectric constants. Herein, unique polyhedral oligomeric silsesquioxane/polyoxometalate (POM(Mo)-POSS(ibu-Li)) nanosheets were synthesized via a simple one-pot method using laboratory-made lithium-containing hepta-isobutyl-POSS (ibu-Li-POSS) and the low-cost industrial chromogenic agent H3PMo12O40 as raw materials. The incorporation of 2 wt % POM(Mo)-POSS(ibu-Li) nanoflakes into EP significantly enhanced the compatibility between nanoadditives and the EP matrix. Compared with EP, the flexural and impact strengths increased by 36.2 and 78.2%, respectively. Therefore, POM(Mo)-POSS(ibu-Li) has significant advantages in enhancing the toughness of EP compared with existing flame retardants. The dielectric constant and loss were apparently reduced to meet the increasing requirements of EP-type electronic packaging materials and components. Notably, the synthesized POM(Mo)-POSS(ibu-Li) contained various flame-retardant and smoke-suppression elements such as P, Mo, and Si. The ultralow loading (2 wt %) of POM(Mo)-POSS(ibu-Li) significantly reduced the peak heat release rate, peak of smoke production rate, and CO production rate by 43.9, 40.6, and 65.8%, respectively. Meanwhile, the value of LOI increased directly from 24.0% for EP to 30.2% and passed the V-0 rating in the UL-94 test. However, incorporating 5 wt % POSS derivatives into EP alone to ensure that the prepared composites pass the V-0 rating of the UL-94 test has always been an extraordinarily difficult problem. Therefore, the dilemmas of poor dielectric properties, inherent flammability, and brittleness of EP were completely overcome through the successful application of POM(Mo)-POSS(ibu-Li) supramolecular nanosheets.

Self-assembled lignin-based flame retardant hybrids carrying Cu2+ for poly(lactic acid) composites with improved fire safety and mechanical properties.

To enhance the flame retardancy and mechanical performance of PLA, a polyelectrolyte complex predicated on lignin was obtained by electrostatic mutual adsorption of ammonium polyphosphate (APP), polyethyleneimine (PEI), and copper ions as raw materials. The FT-IR spectra and EDX analysis confirmed the successful synthesis of a lignin-based flame retardant hybrid (APL-Cu2+) containing copper, phosphorus, and nitrogen elements. The combustion test results showed that the peak heat release rate and total heat release of the PLA composite containing 12 wt% APL-Cu2+ were decreased by 15.1 % and 18.2 %, respectively, as compared to those of pure PLA. The char residue morphology observation revealed that the addition of APL-Cu2+ could promote the formation of a highly dense and stable graphitized char layer, while TG-MS detected the emission of refractory gases such as ammonia gas, carbon dioxide, and water during combustion. The strong hydrogen bonding between APL-Cu2+ and the PLA matrix kept the composite maintaining good strength and toughness. The tensile strength and impact strength of PLA/6APL-Cu2+ increased by 4.73 % and 65.71 %, respectively, due to its high crystallinity and good interfacial compatibility. This work provides a feasible method to develop biobased flame retardant hybrids for PLA composites with better fire safety and improved mechanical properties.

Bio-based P-N flame retardant with ZIF-67 in-situ growth on flexible polyurethane foam with excellent fire safety performance.

The wide application of flexible polyurethane foam (FPUF) poses a giant challenge to human society in terms of fire prevention and environmental pollution. To solve this problem, the lignocellulose-based P-N flame retardant (LFPN) has been developed using mechanochemical methods. It was found that FPUF treated using LFPN exhibited good flame retardancy, but suffered from high smoke generation and toxicity. The hollow dodecahedral ZIF-67 has been used for smoke suppression catalysis, but the agglomeration phenomenon makes it inefficient. Hence, in this study, the adhesive properties of polydopamine (PDA) were utilized to assist the in-situ growth of ZIF-67. The results showed that the total smoke release rate of the treated FPUF was reduced by 40.5%. The toxic gases, such as carbon monoxide (CO), hydrogen cyanide, etc., also showed the same decreasing trend. What's more, the catalytic effect of ZIF-67 itself and the synergistic effect with LFPN gave FPUF great flame retardant and smoke inhibition properties. This novel FPUF provides a new reference for achieving smoke suppression and toxicity reduction.

A Gas-Steamed Route to Mesoporous Open Metal-Organic Framework Cages Enhancing Flame Retardancy and Smoke Suppression of Polyurea.

Up to now, metal-organic frameworks (MOFs) with open nanostructures have shown outstanding capabilities in trapping smoke particles compared to the original MOFs. However, only a few MOF-based strategies have been reported to synthesize hierarchical porous cages thus far, which are mainly restricted to environmentally unfriendly wet-chemical liquid methods. Herein, as a proof-of-concept, a gas-steamed metal-organic framework approach was designed to fabricate a series of cheeselike open cages with hierarchical porosity. Briefly, zeolitic imidazolate framework-67 (ZIF-67) and phytic acid were employed as precursor and etchant, respectively. Abandoning the conventional wet-chemical method, the coordination bond of ZIF-67 was cleaved by acidic steam, forming an open framework with a high specific surface area and a hierarchical porous structure. The universality of this method was also confirmed by the selection of different etchants. Impressively, they also show outstanding fume-toxic adsorption capability and labyrinth effects based on abundant and complex porous channels. At only 5 wt % loading, Co3O4@open ZIF-67 cage-2 (Co3O4@OZC-2) imparted polyurea (PUA) composites with a 21.2% limiting oxygen index, and the peak of heat release rate, total heat release, and total smoke production were reduced by around 37.5, 25.5, and 40.4%, respectively, compared to neat PUA. This work will shed light on the advanced structural design of polymer composites with high fire safety, especially smoke suppression performance, so as to obtain more feasible applications.

Enhancing Char Formation and Flame Retardancy of Ethylene-Vinyl Acetate Copolymer (EVA)/Aluminum Hydroxide (ATH) Composites by Grafting Ladder Phenyl/Vinyl Polysilsesquioxane (PhVPOSS).

The ladder phenyl/vinyl polysilsesquioxane (PhVPOSS) was used to improve the flame-retardancy performances of ethylene-vinyl acetate copolymer (EVA)/aluminum hydroxide (ATH) composites due to the reactivity of its vinyl groups. FTIR, XPS, 1H NMR, and SEM-EDS data demonstrated the PhVPOSS grafting onto EVA molecular chains. The PhVPOSS improved the thermal stability of EVA/ATH composites, as shown by the thermogravimetric analysis (TGA). Furthermore, with the cone calorimeter (CONE) experiments, EVA/ATH/PhVPOSS showed better fire safety than the EVA/ATH composites, with the PHRR, PSPR, and PCOP reduced by 7.89%, 57.4%, and 90.9%, respectively. The mechanism investigations of flame retardancy revealed that the charring behaviors of the EVA/ATH/PhVPOSS composites were improved by the formation of Si-C bonds and Si-O bonds, and a more compact and denser char layer can contribute more to the barrier effect.

Co-curing preparation of flame retardant and smoke-suppressive epoxy resin with a novel phosphorus-containing ionic liquid.

Phosphorus-containing ionic liquid derivatives have been proven to be effective flame retardants for epoxy resin (EP). Flame retardants can accelerate the curing process and improve flame retardancy and smoke suppression of EP composites, which is challenging. In this paper, a novel phosphorus-containing ionic liquid (TPP-PF6) was synthesized and used both as a co-curing agent with 4,4'-diaminodiphenylmethane (DDM) and as a highly effective flame retardant for EP. It has been found that TPP-PF6 was conducive to improve the char formation of EP to inhibit the smoke release at high temperatures. For EP/TPP-PF6 composites, the flame-retardant performance was enhanced rapidly with the increase of TPP-PF6. With only 2 wt% of TPP-PF6, EP/2.0TPP-PF6 reached a UL-94 V-0 rating and a limiting oxygen index of 30.3%. The peak heat release rate, total heat release, and total smoke production values of EP/2.0TPP-PF6 were reduced by 36.32%, 45.81%, and 15.1% compared with those of pure EP, respectively. The thermal degradation products and flame retardant mechanism in gas and condensed phases were studied. It was found that TPP-PF6 had flame retardant effect in the barrier effect of the condensed phase and the quenching effect of the gas phase. This work explores the high-efficiency flame retardant and smoke-suppressive structures with co-curing properties for EP, thus promoting the wide application of EP materials.

3-D flower-like templated LDH-rGO as coating additive for flame retardant products.

Construction of multi-component heterostructures as a flame retardant reinforcer within a polymer is a favorable option to realize the synergistic effects between different types of reinforcers. However, it is difficult to improve polymer flame retardance as the poor compatibility of retardants with polymer matrix can lead to low dispersion. Herein, 3-D flower-like templated layered double hydroxides (LDH) and graphene (rGO) were prepared on the surface of a caprolactam-modified casein micelle template for integration with casein latex based on a blending-casting method. Temp@LDH-rGO hardly affected the stability of the casein-based latex, as its casein-based composite latex was used as a leather surface coating. The limiting oxygen index of finished leather increased up to 27.4% when casein-based 4% Temp@LDH-rGO composite latex was applied for leather finishing. In contrast, its heat release rate and smoke production rate were lowered to 55.686 kW/m2 and 2.239 m-2 s-1, respectively. According to the combustion analysis, the leather samples finished by casein-based Temp@LDH-rGO latex exhibited significant improvement in flame retardant and smoke suppression performance. The casein-based Temp@LDH-rGO composite latex has thus been demonstrated as a highly effective option for functional coatings in diverse fields (e.g., automobile interior decoration, furniture manufacturing, and firefighting equipment).

Flame Retardancy and Smoke Suppression of Silicone Rubber Foam with Microencapsulated Sepiolite and Zinc Borate.

The flame-retardant micro-encapsulated sepiolite (MSEP) was successfully prepared by sol-gel method. Fourier transform infrared, X-ray photoelectron spectroscopy, scanning electron microscopy, and energy dispersive spectroscopy were utilized to prove that sepiolite was encapsulated. Then, the mechanical properties, flame retardance, smoke suppression, and pyrolysis characteristics of silicone rubber foam (SiFs) with MSEP and zinc borate (ZB) were analyzed. The results indicated that the tensile and compressive properties of SiFs could evidently improve with the incorporation of MSEP/ZB. SiFs with 3 wt% MSEP and 6 wt% ZB could achieve an limiting oxygen index value of 30.9 vol% and UL-94 V-0 rating, the time to ignition was 64.7% above that of pure SiFs, the peak heat release rate and total heat release were 42.7% and 25.0% lower than that of pure SiFs, respectively. Furthermore, the peak smoke production rate and total smoke production of SiFs with 3 wt% MSEP and 6 wt% ZB were merely 54.22% and 64.10% of pure SiFs. Especially, the thermal stability of SiFs was significantly enhanced, and the carbon residue of SiFs became denser and more complete after adding 3 wt% MSEP and 6 wt% ZB.