The electrochemistry of stable sulfur isotopes versus lithium.

Sulfur in nature consists of two abundant stable isotopes, with two more neutrons in the heavy one (34S) than in the light one (32S). The two isotopes show similar physicochemical properties and are usually considered an integral system for chemical research in various fields. In this work, a model study based on a Li-S battery was performed to reveal the variation between the electrochemical properties of the two S isotopes. Provided with the same octatomic ring structure, the cyclo-34S8 molecules form stronger S-S bonds than cyclo-32S8 and are more prone to react with Li. The soluble Li polysulfides generated by the Li-34S conversion reaction show a stronger cation-solvent interaction yet a weaker cation-anion interaction than the 32S-based counterparts, which facilitates quick solvation of polysulfides yet hinders their migration from the cathode to the anode. Consequently, the Li-34S cell shows improved cathode reaction kinetics at the solid-liquid interface and inhibited shuttle of polysulfides through the electrolyte so that it demonstrates better cycling performance than the Li-32S cell. Based on the varied shuttle kinetics of the isotopic-S-based polysulfides, an electrochemical separation method for 34S/32S isotope is proposed, which enables a notably higher separation factor than the conventional separation methods via chemical exchange or distillation and brings opportunities to low-cost manufacture, utilization, and research of heavy chalcogen isotopes.

Unveil the origin of voltage oscillation for sodium-ion batteries operating at -40 °C.

Voltage oscillation at subzero in sodium-ion batteries (SIBs) has been a common but overlooked scenario, almost yet to be understood. For example, the phenomenon seriously deteriorates the performance of Na3V2(PO4)3 (NVP) cathode in PC (propylene carbonate)/EC (ethylene carbonate)-based electrolyte at -20 °C. Here, the correlation between voltage oscillation, structural evolution, and electrolytes has been revealed based on theoretical calculations, in-/ex-situ techniques, and cross-experiments. It is found that the local phase transition of the Na3V2(PO4)3 (NVP) cathode in PC/EC-based electrolyte at -20 °C should be responsible for the oscillatory phenomenon. Furthermore, the low exchange current density originating from the high desolvation energy barrier in NVP-PC/EC system also aggravates the local phase transformation, resulting in severe voltage oscillation. By introducing the diglyme solvent with lower Na-solvent binding energy, the voltage oscillation of the NVP can be eliminated effectively at subzero. As a result, the high capacity retentions of 98.3% at -20 °C and 75.3% at -40 °C are achieved. The finding provides insight into the abnormal SIBs degradation and brings the voltage oscillation behavior of rechargeable batteries into the limelight.

Superior Li+ Kinetics by "Low-Activity-Solvent" Engineering for Stable Lithium Metal Batteries.

The structure of solvated Li+ has a significant influence on the electrolyte/electrode interphase (EEI) components and desolvation energy barrier, which are two key factors in determining the Li+ diffusion kinetics in lithium metal batteries. Herein, the "solvent activity" concept is proposed to quantitatively describe the correlation between the electrolyte elements and the structure of solvated Li+. Through fitting the correlation of the electrode potential and solvent concentration, we suggest a "low-activity-solvent" electrolyte (LASE) system for deriving a stable inorganic-rich EEI. Nano LiF particles, as a model, were used to capture free solvent molecules for the formation of a LASE system. This advanced LASE not only exhibits outstanding antidendrite growth behavior but also delivers an impressive performance in Li/LiNi0.8Co0.1Mn0.1O2 cells (a capacity of 169 mAh g-1 after 250 cycles at 0.5 C).

An All-Climate Nonaqueous Hydrogen Gas-Proton Battery.

Rechargeable hydrogen gas batteries, driven by hydrogen evolution and oxidation reactions (HER/HOR), are emerging grid-scale energy storage technologies owing to their low cost and superb cycle life. However, compared with aqueous electrolytes, the HER/HOR activities in nonaqueous electrolytes have rarely been studied. Here, for the first time, we develop a nonaqueous proton electrolyte (NAPE) for a high-performance hydrogen gas-proton battery for all-climate energy storage applications. The advanced nonaqueous hydrogen gas-proton battery (NAHPB) assembled with a representative V2(PO4)3 cathode and H2 anode in a NAPE exhibits a high discharge capacity of 165 mAh g-1 at 1 C at room temperature. It also efficiently operates under all-climate conditions (from -30 to +70 °C) with an excellent electrochemical performance. Our findings offer a new direction for designing nonaqueous proton batteries in a wide temperature range.

Low-Temperature and Fast-Charging Lithium Metal Batteries Enabled by Solvent-Solvent Interaction Mediated Electrolyte.

Lithium metal batteries utilizing lithium metal as the anode can achieve a greater energy density. However, it remains challenging to improve low-temperature performance and fast-charging features. Herein, we introduce an electrolyte solvation chemistry strategy to regulate the properties of ethylene carbonate (EC)-based electrolytes through intermolecular interactions, utilizing weakly solvated fluoroethylene carbonate (FEC) to replace EC, and incorporating the low-melting-point solvent 1,2-difluorobenzene (2FB) as a diluent. We identified that the intermolecular interaction between 2FB and solvent can facilitate Li+ desolvation and lower the freezing point of the electrolyte effectively. The resulting electrolyte enables the LiNi0.8Co0.1Mn0.1O2||Li cell to operate at -30 °C for more than 100 cycles while delivering a high capacity of 154 mAh g-1 at 5.0C. We present a solvation structure and interfacial model to analyze the behavior of the formulated electrolyte composition, establishing a relationship with cell performance and also providing insights for the electrolyte design under extreme conditions.

Weak-Water-Coordination Electrolyte to Stabilize Zinc Anode Interface for Aqueous Zinc Ion Batteries.

The performance of zinc-ion batteries is severely hindered by the uncontrolled growth of dendrites and the severe side reactions on the zinc anode interface. To address these challenges, a weak-water-coordination electrolyte is realized in a peptone-ZnSO4 -based electrolyte to simultaneously regulate the solvation structure and the interfacial environment. The peptone molecules have stronger interaction with Zn2+ ions than with water molecules, making them more prone to coordinate with Zn2+ ions and then reducing the active water in the solvated sheath. Meantime, the peptone molecules selectively adsorb on the Zn metal surface, and then are reduced to form a stable solid-electrolyte interface layer that can facilitate uniform and dense Zn deposition to inhabit the dendritic growth. Consequently, the Zn||Zn symmetric cell can exhibit exceptional cycling performance over 3200 h at 1.0 mA cm-2 /1.0 mAh cm-2 in the peptone-ZnSO4 -based electrolyte. Moreover, when coupled with a Na2 V6 O16 ·3H2 O cathode, the cell exhibits a long lifespan of 3000 cycles and maintains a high capacity retention rate of 84.3% at 5.0 A g-1 . This study presents an effective approach for enabling simultaneous regulation of the solvation structure and interfacial environment to design a highly reversible Zn anode.

Recent Advances in Low-Temperature Liquid Electrolyte for Supercapacitors.

As one of the key components of supercapacitors, electrolyte is intensively investigated to promote the fast development of the energy supply system under extremely cold conditions. However, high freezing point and sluggish ion transport kinetics for routine electrolytes hinder the application of supercapacitors at low temperatures. Resultantly, the liquid electrolyte should be oriented to reduce the freezing point, accompanied by other superior characteristics, such as large ionic conductivity, low viscosity and outstanding chemical stability. In this review, the intrinsically physical parameters and microscopic structure of low-temperature electrolytes are discussed thoroughly, then the previously reported strategies that are used to address the associated issues are summarized subsequently from the aspects of aqueous and non-aqueous electrolytes (organic electrolyte and ionic liquid electrolyte). In addition, some advanced spectroscopy techniques and theoretical simulation to better decouple the solvation structure of electrolytes and reveal the link between the key physical parameters and microscopic structure are briefly presented. Finally, the further improvement direction is put forward to provide a reference and guidance for the follow-up research.

Bi-Functional Electrolyte Additive Leading to a Highly Reversible and Stable Zinc Anode.

A stable stripping/plating process of the zinc anode is extremely critical for the practical application of aqueous zinc metal batteries. However, obstacles, including parasitic reactions and dendrite growth, notoriously deteriorate the stability and reversibility of zinc anode. Herein, Methyl l-α-aspartyl-l-phenylalaninate (Aspartame) is proposed as an effective additive in the ZnSO4 system to realize high stability and reversibility. Aspartame molecule with rich polar functional groups successfully participates in the solvation sheath of Zn2+ to suppress water-induced side reactions. The self-driven adsorption of Aspartame on zinc anode improves uniform deposition with a dose of 10 mm. These synergetic functions endow the zinc anode with a significantly long cycling lifespan of 4500 h. The cell coupled with a vanadium-based cathode also exhibited a high-capacity retention of 71.8% after 1000 cycles, outperforming the additive-free counterparts.

Adjusting Li+ Solvation Structures via Dipole-Dipole Interaction to Construct Inorganic-Rich Interphase for High-Performance Li Metal Batteries.

Practical applications of lithium metal batteries are limited by unstable solid electrolyte interphase (SEI) and uncontrollable dendrite Li deposition. Regulating the solvation structure of Li+ via modifying electrolyte components enables optimizing the structure of the SEI and realizing dendrite-free Li deposition. In this work, it is found that the ionic-dipole interactions between the electron-deficient B atoms in lithium oxalyldifluoro borate (LiDFOB) and the O atoms in the DME solvent molecule can weaken the interaction between the DME molecule and Li+, accelerating the desolvation of Li+. On this basis, the ionic-dipole interactions facilitate the entry of abundant anions into the inner solvation sheath of Li+, which promotes the formation of inorganic-rich SEI. In addition, the interaction between DFOB- and DME molecules reduces the highest occupied molecular orbital energy level of DME molecules in electrolytes, which improves the oxidative stability of the electrolytes system. As a result, the Li||Li cells in LiDFOB-containing electrolytes exhibit an excellent cyclability of over 1800 h with a low overpotential of 18.2 mV, and the Li||LiFePO4 full cells display a high-capacity retention of 93.4% after 100 cycles with a high Coulombic efficiency of 99.3%.

Regulating Electrolyte Solvation Structures via Diluent-Solvent Interactions for Safe High-Voltage Lithium Metal Batteries.

Local high concentration electrolytes (LHCEs) have been proved to be one of the most promising systems to stabilize both high voltage cathodes and Li metal anode for next-generation batteries. However, the solvation structures and interactions among different species in LHCEs are still convoluted, which bottlenecks the further breakthrough on electrolyte development. Here, it is demonstrated that the hydrogen bonding interaction between diluent and solvent is crucial for the construction of LHCEs and corresponding interphase chemistries. The 2,2,2-trifluoroethyl trifluoromethane sulfonate (TFSF) is selected as diluent with the solvent dimethoxy-ethane (DME) to prepare a non-flammable LHCE for high voltage LMBs. This is first find that the hydrogen bonding interaction between TFSF and DME solvent tailors the electrolyte solvation structures by weakening the coordination of DME molecules to Li+ cations and allows more participation of anions in the first solvation shell, leading to the formation of aggregates (AGGs) clusters which are conducive to generating inorganic solid/cathodic electrolyte interphases (SEI/CEIs). The proposed TFSF based LHCE enables the Li||NCM811 (LiNi0.8 Mn0.1 O2 ) batteries to realize >80% capacity retention with a high average Coulombic efficiency of 99.8% for 230 cycles under aggressive conditions (NCM811 cathode: 3.4 mAh cm-2 , cut-off voltage: 4.4 V, and 20 µm Li foil).

Synergetic Dual-Additive Electrolyte Enables Highly Stable Performance in Sodium Metal Batteries.

Sodium (Na)-metal batteries (SMBs) are considered one of the most promising candidates for the large-scale energy storage market owing to their high theoretical capacity (1,166 mAh g-1) and the abundance of Na raw material. However, the limited stability of electrolytes still hindered the application of SMBs. Herein, sulfolane (Sul) and vinylene carbonate (VC) are identified as effective dual additives that can largely stabilize propylene carbonate (PC)-based electrolytes, prevent dendrite growth, and extend the cycle life of SMBs. The cycling stability of the Na/NaNi0.68Mn0.22Co0.1O2 (NaNMC) cell with this dual-additive electrolyte is remarkably enhanced, with a capacity retention of 94% and a Coulombic efficiency (CE) of 99.9% over 600 cycles at a 5 C (750 mA g-1) rate. The superior cycling performance of the cells can be attributed to the homogenous, dense, and thin hybrid solid electrolyte interphase consisting of F- and S-containing species on the surface of both the Na metal anode and the NaNMC cathode by adding dual additives. Such unique interphases can effectively facilitate Na-ion transport kinetics and avoid electrolyte depletion during repeated cycling at a very high rate of 5 C. This electrolyte design is believed to result in further improvements in the performance of SMBs.

Localized High-Concentration Sulfone Electrolytes with High-Voltage Stability and Flame Retardancy for Ni-Rich Lithium Metal Batteries.

The localized high-concentration electrolyte (LHCE) propels the advanced high-voltage battery system. Sulfone-based LHCE is a transformative direction compatible with high energy density and high safety. In this work, the application of lithium bis(trifluoromethanesulphonyl)imide and lithium bis(fluorosulfonyl)imide (LiFSI) in the LHCE system constructed from sulfolane and 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (TTE) is investigated. The addition of diluent causes an increase of contact ion pairs and ionic aggregates in the solvation cluster and an acceptable quantity of free solvent molecules. A small amount of LiFSI as an additive can synergistically decompose with TTE on the cathode and participate in the construction of both electrode interfaces. The designed electrolyte helps the Ni-rich system to cycle firmly at a high voltage of 4.5 V. Even with high mass load and lean electrolyte, it can keep a reversible specific capacity of 91.5% after 50 cycles. The constructed sulfone-based electrolyte system exhibits excellent thermal stability far beyond the commercial electrolytes. Further exploration of in-situ gelation has led to a quick conversion of the designed liquid electrolyte to the gel state, accompanied by preserved stability, which provides a direction for the synergistic development of LHCE with gel electrolytes.

Upgrading Gel Electrolytes Through Electrostatic-Induced Dual-Salt Paradigm for Superior Zn-Ion Battery Performance.

Gel electrolytes are gaining attention for rechargeable Zn-ion batteries because of their high safety, high flexibility, and excellent comprehensive electrochemical performances. However, current gel electrolytes still perform at mediocre levels due to incomplete Zn salts dissociation and side reactions. Herein, an electrostatic-induced dual-salt strategy is proposed to upgrade gel electrolytes to tackle intrinsic issues of Zn metal anodes. The competitive coordination mechanism driven by electrostatic repulsion and steric hindrance of dual anions promotes zinc salt dissociation at low lithium salt addition levels, improving ion transport and mechanical properties of gel electrolytes. Li+ ions and gel components coordinate with H2O, reducing active H2O molecules and inhibiting associated side reactions. The dual-salt gel electrolyte enables excellent reversibility of Zn anodes at both room and low temperatures. Zn||Polyaniline cells using the dual-salt gel electrolyte exhibit a high discharge capacity of 180 mAh g-1 and long-term cycling stability over 180 cycles at -20 °C. The dual-salt strategy offers a cost-effective approach to improving gel electrolytes for high-performance flexible Zn-ion batteries.

Fluorine Rich Borate Salt Anion Based Electrolyte for High Voltage Sodium Metal Battery Development.

This study demonstrates the enhanced performance in high-voltage sodium full cells using a novel electrolyte composition featuring a highly fluorinated borate ester anion (1 M Na[B(hfip)4].3DME) in a binary carbonate mixture (EC:EMC), compared to a conventional electrolyte (1 M Na[PF6] EC:EMC). The prolonged cycling performance of sodium metal battery employing high voltage cathodes (NVPF@C@CNT and NFMO) is attributed to uniform and dense sodium deposition along with the formation of fluorine and boron-rich solid electrolyte interphase (SEI) on the sodium metal anode. Simultaneously, a robust cathode electrolyte interphase (CEI) is formed on the cathode side due to the improved electrochemical stability window and superior aluminum passivation of the novel electrolyte. The CEIs on high-voltage cathodes are discovered to be abundant in C-F, B-O, and B-F components, which contributes to long-term cycling stability by effectively suppressing undesirable side reactions and mitigating electrolyte decomposition. The participation of DME in the primary solvation shell coupled with the comparatively weaker interaction between Na+ and [B(hfip)4]- in the secondary solvation shell, provides additional confirmation of labile desolvation. This, in turn, supports the active participation of the anion in the formation of fluorine and boron-rich interphases on both the anode and cathode.

Less is More: Underlying Mechanism of Zn Electrode Long-Term Stability using Sodium L-Ascorbate as Electrolyte Additive.

Structured passivation layers and hydrated Zn2+ solvation structure strongly influence Zn depositions on Zn electrodes and then the cycle life and electrochemical performance of aqueous zinc ion batteries. To achieve these, the electrolyte additive of sodium L-ascorbate (Ass) is introduced into aqueous zinc sulfate (ZnSO4, ZS) electrolyte solutions. Combined experimental characterizations with theoretical calculations, the unique passivation layers with vertical arrayed micro-nano structure are clearly observed, as well as the hydrated Zn2+ solvation structure is changed by replacing two ligand water molecules with As-, thus regulating the wettability and interfacial electric field intensity of Zn surfaces, facilitating rapid ionic diffusions within electrolytes and electrodes together with the inhibited side reactions and uniform depositions of Zn2+. When tested in Zn||Zn symmetric cell, the electrolyte containing Ass is extraordinarily stably operated for the long time ≈3700 h at both 1 mA cm-2 and 1 mAh cm-2. In Zn||MnO2 full coin cells, the energy density can still maintain as high as ≈184 Wh kg-1 at the power density high up to 2 kW kg-1, as well as the capacity retention can reach up to 80.5% even after 1000 cycles at 2 A g-1, which are substantially superior to the control cells.

N-methyl Formamide Electrolyte Additive Enabling Highly Reversible Zn Anodes.

Parasitic side reactions and dendrites formation hinder the application of aqueous zinc ion batteries due to inferior cycling life and low reversibility. Against this background, N-methyl formamide (NMF), a multi-function electrolyte additive is applied to enhance the electrochemical performance. Studied via advanced synchrotron radiation spectroscopy and DFT calculations, the NMF additive simultaneously modifies the Zn2+ solvation structure and ensures uniform zinc deposition, thus suppressing both parasitic side reactions and dendrite formation. More importantly, an ultralong cycling life of 3115 h in the Zn||Zn symmetric cell at a current density of 0.5 mA cm-2 is achieved with the NMF additive. Practically, the Zn||PANI full cell utilizing NMF electrolyte shows better rate and cycling performance compared to the pristine ZnSO4 aqueous electrolyte. This work provides useful insights for the development of high-performance aqueous metal batteries.

A systematic study of solvation structure of asymmetric lithium salts in water.

Aqueous electrolytes are promising in large-scale energy storage applications due to intrinsic low toxicity, non-flammability, high ion conductivity, and low cost. However, pure water's narrow electrochemical stability window (ESW) limits the energy density of aqueous rechargeable batteries. Water-in-salt electrolytes (WiSE) proposal has expanded the ESW to over 3 V by changing electrolyte solvation structure. The limited solubility and WIS electrolyte crystallization have been persistent concerns for imide-based lithium salts. Asymmetric lithium salts compensate for the above flaws. However, studying the solvation structure of asymmetric salt aqueous electrolytes is rare. Here, we applied small-angle x-ray scattering (SAXS) and Raman spectroscope to reveal the solvation structure of imide-based asymmetric lithium salts. The SAXS spectra show the blue shifts of the lowerqpeak with decreased intensity as the increasing of concentration, indicating a decrease in the average distance between solvated anions. Significantly, an exponential decrease in the d-spacing as a function of concentration was observed. In addition, we also applied the Raman spectroscopy technique to study the evolutions of solvent-separated ion pairs (SSIPs), contacted ion pairs (CIPs), and aggregate ions (AGGs) in the solvation structure of asymmetric salt solutions.

Effects of fluorinated solvents on electrolyte solvation structures and electrode/electrolyte interphases for lithium metal batteries.

Electrolyte is very critical to the performance of the high-voltage lithium (Li) metal battery (LMB), which is one of the most attractive candidates for the next-generation high-density energy-storage systems. Electrolyte formulation and structure determine the physical properties of the electrolytes and their interfacial chemistries on the electrode surfaces. Localized high-concentration electrolytes (LHCEs) outperform state-of-the-art carbonate electrolytes in many aspects in LMBs due to their unique solvation structures. Types of fluorinated cosolvents used in LHCEs are investigated here in searching for the most suitable diluent for high-concentration electrolytes (HCEs). Nonsolvating solvents (including fluorinated ethers, fluorinated borate, and fluorinated orthoformate) added in HCEs enable the formation of LHCEs with high-concentration solvation structures. However, low-solvating fluorinated carbonate will coordinate with Li+ ions and form a second solvation shell or a pseudo-LHCE which diminishes the benefits of LHCE. In addition, it is evident that the diluent has significant influence on the electrode/electrolyte interphases (EEIs) beyond retaining the high-concentration solvation structures. Diluent molecules surrounding the high-concentration clusters could accelerate or decelerate the anion decomposition through coparticipation of diluent decomposition in the EEI formation. The varied interphase features lead to significantly different battery performance. This study points out the importance of diluents and their synergetic effects with the conductive salt and the solvating solvent in designing LHCEs. These systematic comparisons and fundamental insights into LHCEs using different types of fluorinated solvents can guide further development of advanced electrolytes for high-voltage LMBs.

Understanding the Role of Titanium Metal-Organic Framework Nanosheets in Modulating Anode Chemistry for Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries have attracted a continually increasing level of interest for large-scale energy storage because they are highly safe and have high energy density and abundant reserves. However, Zn anodes face significant challenges such as severe dendrite growth and hydrogen evolution reaction (HER). We here propose an efficient Zn2+ sieve strategy for modulating the anode chemistry using two-dimensional NH2-MIL-125 (Ti) metal-organic framework (MOF) nanosheets. Theoretical investigations reveal the crucial role of the Ti MOF in regulating Zn2+ solvation structures for fast diffusion and uniform deposition and decreasing HER reactivity. The structure of the nanosheets enables abundant accessible desolvation sites and shortened ionic pathways. As a result, the MOF nanosheet-protected Zn anode exhibited greatly improved cycling stability in both symmetric cells and full cells. Operando optical monitoring and postmortem analysis revealed effective suppression of dendrite growth and HER by Ti MOF nanosheets. This anti-HER MOF-enabled Zn2+ sieve strategy provides a viable Zn anode and provides new insights for optimizing aqueous batteries.

The Construction of Anion-Induced Solvation Structures in Low-concentration Electrolyte for Stable Zinc Anodes.

Aqueous zinc-ion batteries (ZIBs) are promising large-scale energy storage devices because of their low cost and high safety. However, owing to the high activity of H2O molecules in electrolytes, hydrogen evolution reaction and side reactions usually take place on Zn anodes. Herein, additive-free PCA-Zn electrolyte with capacity of suppressing the activity of free and solvated H2O molecules was designed by selecting the cationophilic and solventophilic anions. In such electrolyte, contact ion-pairs and solvent-shared ion-pairs were achieved even at low concentration, where PCA- anions coordinate with Zn2+ and bond with solvated H2O molecules. Simultaneously, PCA- anions also induce the construction of H-bonds between free H2O molecules and them. Therefore, the activity of free and solvated H2O molecules is effectively restrained. Furthermore, since PCA- anions possess a strong affinity with metal Zn, they can also adsorb on Zn anode surface to protect Zn anode from the direct contact of H2O molecules, inhibiting the occurrence of water-triggered side reactions. As a result, plating/stripping behavior of Zn anodes is highly reversible and the coulombic efficiency can reach to 99.43 % in PCA-Zn electrolyte. To illustrate the feasibility of PCA-Zn electrolyte, the Zn||PANI full batteries were assembled based on PCA-Zn electrolyte and exhibited enhanced cycling performance.