Evaluation of a battery of biotests to improve waste ecotoxicity assessment (HP 14), using incineration bottom ash as a case study.

The assessment of waste ecotoxicity (hazardous property HP14 in the European Union) is fundamental for proper waste classification and safe application/disposal. Biotests are relevant for evaluating waste complex matrices, but their efficiency is crucial to encourage their adoption at the industrial level. This work aims at evaluating possibilities of improving the efficiency of a biotest battery previously suggested in the literature, regarding test selection, duration, and/or laboratory resources optimization. Fresh incineration bottom ash (IBA) was the case study. The test battery analysed included standard aquatic (bacteria, microalgae, macrophytes, daphnids, rotifers, fairy shrimp) and terrestrial (bacteria, plants, earthworms, collembolans) organisms. The assessment followed an Extended Limit Test design (three dilutions of eluate or solid IBA) and the Lowest Ineffective Dilution (LID-approach) for ecotoxicity classification. The results emphasize the importance of testing different species. It was also evidenced that tests with daphnids and earthworms may be shortened to 24 h; the miniaturization of tests is suitable as e.g. differential sensitivity of microalgae and macrophytes was captured with low variability; alternative testing kits can be used when methodological difficulties are found. Microalgae were more sensitive than macrophytes. Similar results were found for the Thamnotoxkit and daphnids test for eluates with natural pH, so the former may be used as an alternative. B. rapa was the most sensitive organism, suggesting that it may be tested as the only terrestrial plant species and that minimum test duration is appropriate. F. candida does not appear to add information to the battery. The differences in sensitivity of A. fischeri and E. fetida compared to the remaining species were not significant enough to exclude them from the battery. Thus, this work suggests a biotest battery to test IBA comprising aquatic tests - Aliivibrio fischeri, Raphidocelis subcapitata (miniaturised test), and Daphnia magna (24 h when clear deleterious effects are observed) or Thamnocephalus platyurus (toxkit) - and terrestrial tests - Arthrobacter globiformis, Brassica rapa (14 d), and Eisenia fetida (24 h). Testing waste with natural pH is also recommended. The Extended Limit Test design considering the LID-approach seems useful in waste testing, particularly for the industry, involving low effort, test material requirements, and few laboratory resources. The LID-approach allowed for differentiating ecotoxic from non-ecotoxic effects and captured different sensitivities between species. Ecotoxicological assessment of other waste may benefit from these recommendations, but caution should be taken given the properties of each waste type.

Concentration of dioxin and screening level ecotoxicity of pore water from bottom sediments in relation to organic carbon contents.

The information about concentrations of dioxin in pore water, ecotoxicity and DOC and TOC content can be key factor for the prediction of the fate of dioxins in the aquatic environment as well as an ecological risk assessment. The aims of the study were to assess the concentration of PCDDs/PCDFs and ecotoxicity of pore water and to compare above results in relation to the dissolved organic carbon (DOC) and total organic carbon (TOC) content. The concentration of dioxins was assessed using an enzyme-linked immunoassay test, while the ecotoxicity of pore water was determined using a crustacean Daphnia magna and bacteria Aliivibrio fischeri. The studies were conducted on two different dammed reservoirs Roznów (catchment basin of an agricultural character) and Rybnik (catchment basin of an industrial character) located in southern Poland. The concentration of dioxins in pore water was between 8.56 to 90.92 ng EQ/L, with a significantly higher concentration in the pore water from the Roznów Reservoir than the Rybnik Reservoir. The DOC content in pore water was from 30.29 to 63.02 mg/L (Roznów Reservoir) and from 35.46 to 60.53 mg/L (Rybnik Reservoir). Higher toxic responses were recorded for A. fischeri than for D. magna. Moreover a significantly higher toxicity for both tested organisms was indicated in pore water from the Roznów Reservoir. Besides of TOC and DOC, the fine fractions of the sediments were particularly important in the concentration of dioxin in pore water. The other pore water parameters, such as pH and EC can influence the toxicity of water for organisms. The result indicate complex relationships between the PCDD/F, ecotoxicity and DOC, TOC concentration in pore water and confirms that these parameters are important in terms of water environmental contamination.

Mobility, ecotoxicity, bioaccumulation and sources of trace elements in the bottom sediments of the Roznów reservoir.

The aim of the study was to use of geochemical, chemical, ecotoxicological and biological indicators for a comprehensive assessment of ecological risks related to the mobility, ecotoxicity and bioavailability of trace elements in the bottom sediment of the Roznów reservoir. The study found three elements deserving attention in the sediments: cadmium, nickel and chromium. Cadmium proved to be the most mobile and bioavailable, although the total cadmium content and geochemical indicators did not reveal any risk to organisms. Geochemical indicators showed that the sediments are contaminated with nickel and chromium, but both elements had a low bioaccumulation factor. Fractional analysis also revealed relatively low mobility of Cr and Ni and a higher potential risk of bioavailability for nickel. Most of the tested sediment samples had low toxicity in relation to the tested organisms. For H. incongruens, 11% of the samples were non-toxic, 50% of the samples had low toxicity, and 39% of the samples were toxic. For A. fischeri, no toxicity was found in 7% of the samples, low toxicity in 76% of the samples and toxicity in 17% of the sediment samples. The As, Cd, Cu content in the F1 fraction correlated significantly positively with the content of these metals in mussel tissues. Both biotesting and chemical analysis can reveal a potential risk to aquatic organisms. For a real assessment of the ecological risks associated with trace elements, it is necessary to use bioindicators taken from the environment and exposed to trace elements in situ.

Assessment of the Bulgarian Wastewater Treatment Plants' Impact on the Receiving Water Bodies.

Deterioration of water quality is a major problem world widely according to many international non-governmental organizations (NGO). As one of the European Union (EU) countries, Bulgaria is also obliged by EU legislation to maintain best practices in assessing surface water quality and the efficiency of wastewater treatment processes. For these reasons studies were undertaken to utilize ecotoxicological (Microtox®, Phytotoxkit FTM, Daphtoxkit FTM), instrumental (to determine pH, electrical conductivity (EC), chemical oxygen demand, total suspended solids (TSS), total nitrogen (N) and phosphorus (P), chlorides, sulphates, Cr, Co, Cu, Cd, Ba, V, Mn, Fe, Ni, Zn, Se, Pb), as well as advanced chemometric methods (partial least squares-discriminant analysis (PLS-DA)) in data evaluation to comprehensively assess wastewater treatment plants' (WWTPs) effluents and surface waters quality around 21 major Bulgarian cities. The PLS-DA classification model for the physicochemical parameters gave excellent discrimination between WWTP effluents and surface waters with 93.65% correct predictions (with significant contribution of EC, TSS, P, N, Cl, Fe, Zn, and Se). The classification model based on ecotoxicological data identifies the plant test endpoints as having a greater impact on the classification model efficiency than bacterial, or crustaceans' endpoints studied.

UPLC-MS/MS analysis of antibiotics in pharmaceutical effluent in Tunisia: ecotoxicological impact and multi-resistant bacteria dissemination.

The UPLC MS/MS analysis showed the presence of the two antibiotics in the pharmaceutical industry discharges during 3 months; norfloxacin and spiramycin which were quantified with the mean concentrations of 226.7 and 84.2 ng mL-1, respectively. Sixteen resistant isolates were obtained from the pharmaceutical effluent and identified by sequencing. These isolates belong to different genera, namely Citrobacter, Acinetobacter, Pseudomonas, Delftia, Shewanella, and Rheinheimera. The antibiotic resistance phenotypes of these isolates were determined (27 tested antibiotics-discs). All the studied isolates were found resistant to amoxicillin and gentamicin, and 83.33% of isolates were resistant to ciprofloxacin. Multiple antibiotic resistances were revealed against ß-lactams, quinolones, and aminoglycosides families. Our overall results suggest that the obtained bacterial isolates may constitute potential candidates for bioremediation and can be useful for biotechnological applications. Genotoxic effects were assessed by a battery of biotests; the pharmaceutical wastewater was genotoxic according to the bacterial Vitotox test and micronuclei test. Genotoxicity was also evaluated by the comet test; the tail DNA damages reached 38 and 22% for concentrated sample (10×) and non-concentrated sample (1×), respectively. However, the histological sections of kidney and liver's mice treated by pharmaceutical effluent showed normal histology and no visible structural effects or alterations as cytolysis, edema, or ulcerative necrosis were observed. Residual antibiotics can reach water environment through wastewater and provoke dissemination of the antibiotics resistance and induce genotoxic effects.

Increased oxygen content in biochar lowered bioavailability of polycyclic aromatic hydrocarbons-related toxicity to various organisms.

Agricultural or environmental application of biochar (BC) is connected with the introduction of biochar-derived components among which polycyclic aromatic hydrocarbons (PAHs) and heavy metals are the most toxic. Their presence and bioavailability are crucial considering biochar toxicity. The effect of feedstock and pyrolysis temperature on the physicochemical properties of produced biochar and contaminant content was established and combined with toxicity to a broad range of living organisms. The obtained data revealed that predicting the bioavailability of PAHs using the total content is misleading. The toxicity was influenced by factors in the following way: the bioavailable PAHs > ash > total PAHs content in BC stressing the role of BC physicochemical characteristics. Among tested BC properties, surface functionalization, e.g. presence of oxygen-containing functional groups was crucial in revealing the toxicity. The data clearly indicate that additional research is required to determine BC's impact on various organisms and performing one ecotoxicity test is not sufficient.

Biotests in Cyanobacterial Toxicity Assessment-Efficient Enough or Not?

Cyanobacteria are a diverse group of organisms known for producing highly potent cyanotoxins that pose a threat to human, animal, and environmental health. These toxins have varying chemical structures and toxicity mechanisms and several toxin classes can be present simultaneously, making it difficult to assess their toxic effects using physico-chemical methods, even when the producing organism and its abundance are identified. To address these challenges, alternative organisms among aquatic vertebrates and invertebrates are being explored as more assays evolve and diverge from the initially established and routinely used mouse bioassay. However, detecting cyanotoxins in complex environmental samples and characterizing their toxic modes of action remain major challenges. This review provides a systematic overview of the use of some of these alternative models and their responses to harmful cyanobacterial metabolites. It also assesses the general usefulness, sensitivity, and efficiency of these models in investigating the mechanisms of cyanotoxicity expressed at different levels of biological organization. From the reported findings, it is clear that cyanotoxin testing requires a multi-level approach. While studying changes at the whole-organism level is essential, as the complexities of whole organisms are still beyond the reach of in vitro methodologies, understanding cyanotoxicity at the molecular and biochemical levels is necessary for meaningful toxicity evaluations. Further research is needed to refine and optimize bioassays for cyanotoxicity testing, which includes developing standardized protocols and identifying novel model organisms for improved understanding of the mechanisms with fewer ethical concerns. In vitro models and computational modeling can complement vertebrate bioassays and reduce animal use, leading to better risk assessment and characterization of cyanotoxins.

An integrated characterisation of incineration bottom ashes towards sustainable application: Physicochemical, ecotoxicological, and mechanical properties.

Environmental protection is a central concern regarding municipal solid waste incineration bottom ash (IBA) management, but the assessment of waste Hazardous Property HP14 (ecotoxicity) is still under debate. Civil engineering applications may be a suitable management strategy. This work aimed at evaluating IBA regarding mechanical behaviour and environmental hazardous potential, including a biotest battery for ecotoxicity assessment (comprising miniaturised tests), to explore its potential for safe utilization. Physical, chemical, ecotoxicological (Aliivibrio fischeri, Raphidocelis subcapitata, Lemna minor, Daphnia magna, Lepidium sativum), and mechanical (one-dimensional compressibility, shear strength) analyses were performed. The low leaching for potentially toxic metals and ions complied with European Union (EU) limit values for non-hazardous waste landfills. No relevant ecotoxicological effects were found. The biotest battery seems suitable for ecotoxicological assessment in the aquatic ecosystem, providing wide information on waste impact on different trophic/functional levels and chemical uptake routes, simultaneously involving short-duration tests and reduced amounts of waste. IBA presented more compressibility than sand, but its mixture with sand (30%:70%) was closer to sand compressibility. IBA (lower stresses) and the mixture (higher stresses) showed slightly higher shear strength than sand. Overall, IBA presented the potential for valorisation as loose aggregates from an environmental and mechanical viewpoint in a circular economy framework.

Ecotoxicological Estimation of 4-Cumylphenol, 4-t-Octylphenol, Nonylphenol, and Volatile Leachate Phenol Degradation by the Microscopic Fungus Umbelopsis isabellina Using a Battery of Biotests.

The phenolic xenobiotics nonylphenol (NP), 4-tert-octylphenol (4-t-OP), and 4-cumylphenol (4-CP) have the potential to seriously disrupt the endocrine system. Volatile phenols (VPs), especially those present in landfill leachate, also adversely affect the health of numerous organisms. Microbial degradation of xenobiotics can result in the formation of intermediates with higher toxicity than the precursor substrates. Therefore, the main aim of this study was to assess the changes in environmental ecotoxicity during the biotransformation of nonylphenol, 4-tert-octylphenol, 4-cumylphenol and volatile phenols by Umbelopsis isabellina using a battery of biotests. The application of bioindicators belonging to different taxonomic groups and diverse trophic levels (producers, consumers, and reducers) indicated a significant reduction in toxicity during the cultivation of fungus cultures both for nonylphenol, 4-tert-octylphenol, 4-cumylphenol and volatile phenols. The rate of toxicity decline was correlated with the degree of xenobiotic biotransformation. Removal of 4-cumylphenol and 4-tert-octylphenol also led to a decrease in the anti-androgenic potential. Moreover, this is the first report demonstrating the anti-androgenic properties of 4-cumylphenol. The results showed that U. isabellina is an attractive tool for the bioremediation and detoxification of contaminated environments.

Ecotoxicity screening evaluation of selected pharmaceuticals and their transformation products towards various organisms.

The intensive development of medical science has led to an increase in the availability and use of pharmaceutical products. However, nowadays, most of scientific attention has been paid to the native forms of pharmaceuticals, while the transformation products (TPs) of these substances, understood herein as metabolites, degradation products, and selected enantiomers, remain largely unexplored in terms of their characterization, presence, fate and effects within the natural environment. Therefore, the main aim of this study was to evaluate the toxicity of seven native compounds belonging to different therapeutic groups (non-steroidal anti-inflammatory drugs, opioid analgesics, beta-blockers, antibacterial and anti-epileptic drugs), along with the toxicity of their 13 most important TPs. For this purpose, an ecotoxicological test battery, consisting of five organisms of different biological organization was used. The obtained data shows that, in general, the toxicity of TPs to the tested organisms was similar or lower compared to their parent compounds. However, for example, significantly higher toxicity of the R form of ibuprofen to algae and duckweed, as well as a higher toxicity of the R form of naproxen to luminescent bacteria, was observed, proving that the risk associated with the presence of drug TPs in the environment should not be neglected.

Assessing toxicity of metal contaminated soil from glassworks sites with a battery of biotests.

The present study addresses toxicological properties of metal contaminated soils, using glassworks sites in south-eastern Sweden as study objects. Soil from five selected glassworks sites as well as from nearby reference areas were analysed for total and water-soluble metal concentrations and general geochemical parameters. A battery of biotests was then applied to assess the toxicity of the glassworks soil environments: a test of phytotoxicity with garden cress (Lepidium sativum); the BioTox™ test for toxicity to bacteria using Vibrio fischeri; and analyses of abundancies and biomass of nematodes and enchytraeids. The glassworks- and reference areas were comparable with respect to pH and the content of organic matter and nutrients (C, N, P), but total metal concentrations (Pb, As, Ba, Cd and Zn) were significantly higher at the former sites. Higher metal concentrations in the water-soluble fraction were also observed, even though these concentrations were low compared to the total ones. Nevertheless, toxicity of the glassworks soils was not detected by the two ex situ tests; inhibition of light emission by V. fischeri could not be seen, nor was an effect seen on the growth of L. sativum. A decrease in enchytraeid and nematode abundance and biomass was, however, observed for the landfill soils as compared to reference soils, implying in situ toxicity to soil-inhabiting organisms. The confirmation of in situ bioavailability and negative effects motivates additional studies of the risk posed to humans of the glassworks villages.

Laser-synthesized nanocrystalline, ferroelectric, bioactive BaTiO3/Pt/FS for bone implants.

The goal of our study is to design BaTiO3 ferroelectric layers that will cover metal implants and provide improved osseointegration. We synthesized ferroelectric BaTiO3 layers on Pt/fused silica substrates, and we studied their physical and bio-properties. BaTiO3 and Pt layers were prepared using KrF excimer laser ablation at substrate temperature Ts in the range from 200°C to 750°C in vacuum or under oxygen pressure of 10 Pa, 15 Pa, and 20 Pa. The BaTiO3/Pt and Pt layers adhered well to the substrates. BaTiO3 films of crystallite size 60-140 nm were fabricated. Ferroelectric loops were measured and ferroelectricity was also confirmed using Raman scattering measurements. Results of atomic force microscopy topology and the X-ray diffraction structure of the BaTiO3/Pt/fused silica multilayers are presented. The adhesion, viability, growth, and osteogenic differentiation of human osteoblast-like Saos-2 cells were also studied. On days 1, 3, and 7 after seeding, the lowest cell numbers were found on non-ferroelectric BaTiO3, while the values on ferroelectric BaTiO3, on non-annealed and annealed Pt interlayers, and on the control tissue culture polystyrene dishes and microscopic glass slides were similar, and were usually significantly higher than on non-ferroelectric BaTiO3. A similar trend was observed for the intensity of the fluorescence of alkaline phosphatase, a medium-term marker of osteogenic differentiation, and of osteocalcin, a late marker of osteogenic differentiation. At the same time, the cell viability, tested on day 1 after seeding, was very high on all tested samples, reaching 93-99%. Ferroelectric BaTiO3 films deposited on metallic bone implants through a Pt interlayer can therefore markedly improve the osseointegration of these implants in comparison with non-ferroelectric BaTiO3 films.

Characterization of 3D-Printed Moulds for Soft Lithography of Millifluidic Devices.

Increased demand for inexpensive and rapid prototyping methods for micro- and millifluidic lab-on-a-chip (LOC) devices has stimulated considerable interest in alternative cost-effective fabrication techniques. Additive manufacturing (AM)-also called three-dimensional (3D) printing-provides an attractive alternative to conventional fabrication techniques. AM has been used to produce LOC master moulds from which positive replicas are made using soft-lithography and a biocompatible elastomer, poly(dimethylsiloxane) (PDMS). Here we characterize moulds made using two AM methods-stereolithography (SLA) and material-jetting (MJ)-and the positive replicas produced by soft lithography and PDMS moulding. The results showed that SLA, more than MJ, produced finer part resolution and finer tuning of feature geometry. Furthermore, as assessed by zebrafish (Danio rerio) biotoxicity tests, there was no toxicity observed in SLA and MJ moulded PDMS replicas. We conclude that SLA, utilizing commercially available printers and resins, combined with PDMS soft-lithography, is a simple and easily accessible technique that lends its self particularly well to the fabrication of biocompatible millifluidic devices, highly suited to the in-situ analysis of small model organisms.

Bioassays as one of the Green Chemistry tools for assessing environmental quality: A review.

For centuries, mankind has contributed to irreversible environmental changes, but due to the modern science of recent decades, scientists are able to assess the scale of this impact. The introduction of laws and standards to ensure environmental cleanliness requires comprehensive environmental monitoring, which should also meet the requirements of Green Chemistry. The broad spectrum of Green Chemistry principle applications should also include all of the techniques and methods of pollutant analysis and environmental monitoring. The classical methods of chemical analyses do not always match the twelve principles of Green Chemistry, and they are often expensive and employ toxic and environmentally unfriendly solvents in large quantities. These solvents can generate hazardous and toxic waste while consuming large volumes of resources. Therefore, there is a need to develop reliable techniques that would not only meet the requirements of Green Analytical Chemistry, but they could also complement and sometimes provide an alternative to conventional classical analytical methods. These alternatives may be found in bioassays. Commercially available certified bioassays often come in the form of ready-to-use toxkits, and they are easy to use and relatively inexpensive in comparison with certain conventional analytical methods. The aim of this study is to provide evidence that bioassays can be a complementary alternative to classical methods of analysis and can fulfil Green Analytical Chemistry criteria. The test organisms discussed in this work include single-celled organisms, such as cell lines, fungi (yeast), and bacteria, and multicellular organisms, such as invertebrate and vertebrate animals and plants.

Addition of biochar to sewage sludge decreases freely dissolved PAHs content and toxicity of sewage sludge-amended soil.

Due to an increased content of polycyclic aromatic hydrocarbons (PAHs) frequently found in sewage sludges, it is necessary to find solutions that will reduce the environmental hazard associated with their presence. The aim of this study was to determine changes of total and freely dissolved concentration of PAHs in sewage sludge-biochar-amended soil. Two different sewage sludges and biochars with varying properties were tested. Biochars (BC) were produced from biogas residues at 400 °C or 600 °C and from willow at 600 °C. The freely dissolved PAH concentration was determined by means of passive sampling using polyoxymethylene (POM). Total and freely dissolved PAH concentration was monitored at the beginning of the experiment and after 90 days of aging of the sewage sludge with the biochar and soil. Apart from chemical evaluation, the effect of biochar addition on the toxicity of the tested materials on bacteria - Vibrio fischeri (Microtox®), plants - Lepidium sativum (Phytotestkit F, Phytotoxkit F), and Collembola - Folsomia candida (Collembolan test) was evaluated. The addition of biochar to the sewage sludges decreased the content of Cfree PAHs. A reduction from 11 to 43% of sewage sludge toxicity or positive effects on plants expressed by root growth stimulation from 6 to 25% to the control was also found. The range of reduction of Cfree PAHs and toxicity was dependent on the type of biochar. After 90 days of incubation of the biochars with the sewage sludge in the soil, Cfree PAHs and toxicity were found to further decrease compared to the soil with sewage sludge alone. The obtained results show that the addition of biochar to sewage sludges may significantly reduce the risk associated with their environmental use both in terms of PAH content and toxicity of the materials tested.

Environmental risk assessment of Polish wastewater treatment plant activity.

Wastewater treatment plants (WWTPs) play an extremely important role in shaping modern society's environmental well-being and awareness, however only well operated and supervised systems can be considered as environmentally sustainable. For this reason, an attempt was undertaken to assess the environmental burden posed by WWTPs in major Polish cities by collecting water samples prior to and just after wastewater release points. Both classical and biological methods (Microtox(®), Ostracodtoxkit F™ and comet assay) were utilized to assess environmental impact of given WWTP. Interestingly, in some cases, water quality improvement indicated as a toxicity decrement toward one of the bio-indicating organisms makes water worse for others in the systems. This fact is particularly noticeable in case of Silesian cities where heavy industry and high population density is present. It proves that WWTP should undergo individual evaluation of pollutant removal efficiency and tuned to selectively remove pollutants of highest risk to surrounding regional ecosystems. Biotests again proved to be an extremely important tool to fully assess the impact of environmental stressors on water bodies receiving effluents from WWTPs.

Occurrence of the Toxin-Producing Aspergillus versicolor Tiraboschi in Residential Buildings.

In an area representative of a moderate climate zone (Lubuskie Province in Poland), mycological tests in over 270 flats demonstrated the occurrence of 82 species of moulds. Aspergillus versicolor Tiraboschi was often encountered on building partitions (frequency 4: frequently). The ability to synthesize the carcinogenic sterigmatocystin (ST) means that it poses a risk to humans and animals. Biotoxicological tests of biomasses of A. versicolor were conducted in the Microbiological and Toxicological Laboratory, using the planarians Dugesia tigrina (Girard). The obtained results of the tests covered a broad range of toxicity levels of isolated strains: from weakly toxic (100-1000 mg·L(-3)) to potently toxic (1-10 mg·L(-3)). The high-performance liquid chromatography (HPLC) physicochemical method confirmed the ability of A. versicolor strains to synthesize sterigmatocystin. All of the samples of the air-dry biomasses of the fungi contained ST in the range between 0.03 and 534.38 mg·kg(-1). In the bio-safety level (BSL) classification A. versicolor belongs to category 1. Additionally, A. versicolor is an allergenic mould.

Biological plausibility as a tool to associate analytical data for micropollutants and effect potentials in wastewater, surface water, and sediments with effects in fishes.

Discharge of substances like pesticides, pharmaceuticals, flame retardants, and chelating agents in surface waters has increased over the last decades due to the rising numbers of chemicals used by humans and because many WWTPs do not eliminate these substances entirely. The study, results of which are presented here, focused on associations of (1) concentrations of micropollutants in wastewater treatment plant (WWTP) effluents, surface waters, sediments, and tissues of fishes; (2) results of laboratory biotests indicating potentials for effects in these samples and (3) effects either in feral chub (Leuciscus cephalus) from two German rivers (Schussen, Argen) or in brown trout (Salmo trutta f. fario) and rainbow trout (Oncorhynchus mykiss) exposed in bypass systems to streamwater of these rivers or in cages directly in the rivers. The Schussen and Argen Rivers flow into Lake Constance. The Schussen River is polluted by a great number of chemicals, while the Argen River is less influenced by micropollutants. Pesticides, chelating agents, flame retardants, pharmaceuticals, heavy metals, polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs) were detected in effluents of a WWTP discharging to the Schussen as well as in surface water, and/or fishes from downstream of the WWTP. Results obtained by biotests conducted in the laboratory (genotoxicity, dioxin-like toxicity, and embryotoxicity) were linked to effects in feral fish collected in the vicinity of the WWTP or in fishes exposed in cages or at the bypass systems downstream of the WWTP. Dioxin-like effect potentials detected by reporter gene assays were associated with activation of CYP1A1 enzymes in fishes which are inducible by dioxin-like chemicals. Abundances of several PCBs in tissues of fishes from cages and bypass systems were not associated with these effects but other factors can influence EROD activity. Genotoxic potentials obtained by in vitro tests were associated with the presence of micronuclei in erythrocytes of chub from the river. Chemicals potentially responsible for effects on DNA were identified. Embryotoxic effects on zebrafish (Danio rerio), investigated in the laboratory, were associated with embryotoxic effects in trout exposed in streamwater bypass systems at the two rivers. In general, responses at all levels of organization were more pronounced in samples from the Schussen than in those from the Argen. These results are consistent with the magnitudes of chemical pollution in these two streams. Plausibility chains to establish causality between exposures and effects and to predict effects in biota in the river from studies in the laboratory are discussed.

Revision of biological methods for determination of EDC presence and their endocrine potential.

Endocrine-disrupting compounds (EDC) are chemicals responsible for disturbances in the hormonal balance of organisms. This group of chemicals includes both egzogenic and endogenic substances or their mixtures that impact functioning of natural hormones in organisms. In the available literature one can find information on the application of chromatographic and related techniques in the analysis of environmental samples for detection, identification, and quantitation of a wide spectrum of chemicals posing endocrine properties. On the other hand, more and more biotests are being developed to determine endocrine potency of environmental samples due to development of genetic engineering methods and specific detection methods of cells' response to the action of particular chemicals of interest. This article presents revisions of the most novel methods for this potency determination with application to biological elements.