Optimal Design of Multiple Floating Rings for 3D Large-Area Trench Electrode Silicon Detector.

The 3D electrode silicon detector eliminates the limit of chip thickness, so it can reduce the electrode spacing (small area) and effectively improve the radiation hardness. In order to expand the application range of the 3D electrode detector, we first propose a 3D large-area silicon detector with a large sensitive volume, and realize multiple floating rings on the upper and lower surfaces of the detector. Due to the influence of different charge states and energy levels in the Si-SiO2 interface system, the top and bottom of the 3D P+ electrode are more prone to avalanche breakdown in the 3D large-area detector before the detector is completely depleted or the carrier saturation drift velocity is reached. Moreover, the electric field distribution becomes very uneven under the influence of the oxide charge, resulting in non-equilibrium carriers that cannot drift in the optimal path parallel to the detector surface. In this paper, the effect of floating rings on the performance of a 3D large-area silicon detector is studied by TCAD simulation. It can increase avalanche breakdown voltage by 14 times in a non-irradiated environment, and can work safely in a moderate irradiated environment. The charge collection efficiency can be effectively improved by optimizing the drift path.

Visualizing Carrier Transport in Metal Halide Perovskite Nanoplates via Electric Field Modulated Photoluminescence Imaging.

Metal halide perovskite nanostructures have recently been the focus of intense research due to their exceptional optoelectronic properties and potential applications in integrated photonics devices. Charge transport in perovskite nanostructure is a crucial process that defines efficiency of optoelectronic devices but still requires a deep understanding. Herein, we report the study of the charge transport, particularly the drift of minority carrier in both all-inorganic CsPbBr3 and organic-inorganic hybrid CH3NH3PbBr3 perovskite nanoplates by electric field modulated photoluminescence (PL) imaging. Bias voltage dependent elongated PL emission patterns were observed due to the carrier drift at external electric fields. By fitting the drift length as a function of electric field, we obtained the carrier mobility of about 28 cm2 V-1 S-1 in the CsPbBr3 perovskite nanoplate. The result is consistent with the spatially resolved PL dynamics measurement, confirming the feasibility of the method. Furthermore, the electric field modulated PL imaging is successfully applied to the study of temperature-dependent carrier mobility in CsPbBr3 nanoplates. This work not only offers insights for the mobile carrier in metal halide perovskite nanostructures, which is essential for optimizing device design and performance prediction, but also provides a novel and simple method to investigate charge transport in many other optoelectronic materials.

Optimized Design of a Hexagonal Equal Gap Silicon Drift Detector with Arbitrary Surface Electric Field Spiral.

In our previous studies, the silicon drift detector (SDD) structure with a constant spiral ring cathode gap (g) and a given surface electric field has been partially investigated based on the physical model that gives an analytical solution to the integrals in the calculations. Those results show that the detector has excellent electrical characteristics with a very homogeneous carrier drift electric field. In order to cope with the implementation of the theoretical approach with a complete set of technical parameters, this paper performs different theoretical algorithms for the technical implementation of the detector performance using the Taylor expansion method to construct a model for cases where the parameter "j" is a non-integer, approximating the solution with finite terms. To verify the accuracy of this situation, we performed a simulation of the relevant electrical properties using the Sentaurus TCAD tool 2018. The electrical properties of the single and double-sided detectors are first compared, and then the effects of different equal gaps g (g = 10 µm, 20 µm, and 25 µm, respectively) on the electrical properties of the double-sided detectors are analyzed and demonstrated. By analyzing and comparing the electrical characteristics data from the simulation results, we can show that the double-sided structure has a larger transverse drift electric field, which improves the spatial position resolution as well as the response speed. The effect of the gap size on the electrical characteristics of the detector is also analyzed by analyzing three different gap bifacial detectors, and the results show that a 10 µm equal gap is the optimal design. Such results can be used in applications requiring large-area SDD, such as the pulsar X-ray autonomous navigation. in the future to provide navigation and positioning space services for spacecraft deep-space exploration.

Nonlinear effect of carrier drift on the performance of an n-type ZnO nanowire nanogenerator by coupling piezoelectric effect and semiconduction.

In piezoelectric semiconductors, electric fields drive carriers into motion/redistribution, and in turn the carrier motion/redistribution has an opposite effect on the electric field itself. Thus, carrier drift in a piezoelectric semiconducting structure is essentially nonlinear unless the induced fluctuation of carrier concentration is very small. In this paper, the nonlinear governing equation of carrier concentration was established by coupling both piezoelectric effect and semiconduction. A nonlinear carrier-drift effect on the performance of a ZnO nanogenerator was investigated in detail and it was elucidated that carrier motion/redistribution occurs in the ZnO nanowire (ZNW) cross section while there is no carrier motion in the axial direction. At the same time, we noted that the amplitude of boundary electric charge grows with increasing deformation, but the peaks of boundary electric charge do not appear at the cross-section endpoints. Thus, in order to effectively improve the performance of the ZNW nanogenerator, the effect of electrode configuration on the piezoelectric potential difference and output power was analyzed in detail. The electrode size for the optimal performance of a ZnO nanowire generator was proposed. This analysis that couples electromechanical fields and carrier concentration as a whole has some referential significance to piezotronics.