Design and Evaluation of Real-Time Data Storage and Signal Processing in a Long-Range Distributed Acoustic Sensing (DAS) Using Cloud-Based Services.

In cloud-based Distributed Acoustic Sensing (DAS) sensor data management, we are confronted with two primary challenges. First, the development of efficient storage mechanisms capable of handling the enormous volume of data generated by these sensors poses a challenge. To solve this issue, we propose a method to address the issue of handling the large amount of data involved in DAS by designing and implementing a pipeline system to efficiently send the big data to DynamoDB in order to fully use the low latency of the DynamoDB data storage system for a benchmark DAS scheme for performing continuous monitoring over a 100 km range at a meter-scale spatial resolution. We employ the DynamoDB functionality of Amazon Web Services (AWS), which allows highly expandable storage capacity with latency of access of a few tens of milliseconds. The different stages of DAS data handling are performed in a pipeline, and the scheme is optimized for high overall throughput with reduced latency suitable for concurrent, real-time event extraction as well as the minimal storage of raw and intermediate data. In addition, the scalability of the DynamoDB-based data storage scheme is evaluated for linear and nonlinear variations of number of batches of access and a wide range of data sample sizes corresponding to sensing ranges of 1-110 km. The results show latencies of 40 ms per batch of access with low standard deviations of a few milliseconds, and latency per sample decreases for increasing the sample size, paving the way toward the development of scalable, cloud-based data storage services integrating additional post-processing for more precise feature extraction. The technique greatly simplifies DAS data handling in key application areas requiring continuous, large-scale measurement schemes. In addition, the processing of raw traces in a long-distance DAS for real-time monitoring requires the careful design of computational resources to guarantee requisite dynamic performance. Now, we will focus on the design of a system for the performance evaluation of cloud computing systems for diverse computations on DAS data. This system is aimed at unveiling valuable insights into performance metrics and operational efficiencies of computations on the data in the cloud, which will provide a deeper understanding of the system's performance, identify potential bottlenecks, and suggest areas for improvement. To achieve this, we employ the CloudSim framework. The analysis reveals that the virtual machine (VM) performance decreases significantly the processing time with more capable VMs, influenced by Processing Elements (PEs) and Million Instructions Per Second (MIPS). The results also reflect that, although a larger number of computations is required as the fiber length increases, with the subsequent increase in processing time, the overall speed of computation is still suitable for continuous real-time monitoring. We also see that VMs with lower performance in terms of processing speed and number of CPUs have more inconsistent processing times compared to those with higher performance, while not incurring significantly higher prices. Additionally, the impact of VM parameters on computation time is explored, highlighting the importance of resource optimization in the DAS system design for efficient performance. The study also observes a notable trend in processing time, showing a significant decrease for every additional 50,000 columns processed as the length of the fiber increases. This finding underscores the efficiency gains achieved with larger computational loads, indicating improved system performance and capacity utilization as the DAS system processes more extensive datasets.

Investigation of the Reduction in Distributed Acoustic Sensing Signal Due to Perforation Erosion by Using CFD Acoustic Simulation and Lighthill's Acoustic Power Law.

Distributed Acoustic Sensing (DAS), widely adopted in hydraulic fracturing monitoring, continuously measures sound from perforation holes due to fluid flow through the perforation holes during fracturing treatment. DAS has the potential to monitor perforation Tulsa, OK 74136erosion, a phenomenon of increasing perforation size due to sand (referred to as proppant) injection during treatment. Because the sound generated by fluid flow at a perforation hole is negatively related to the perforation diameter, by detecting the decay of the DAS signal, the perforation erosion level can be estimated, which is critical information for fracture design. We used a Computation Fluid Dynamics (CFD) acoustic simulator to calculate the acoustic pressure induced by turbulence inside a wellbore and investigated the relationship between the acoustic response from fluid flow through a perforation and the perforation size by running the simulator for various perforation diameters and flow rates. The results show that if the perforation size is constant, the plot between the calculated sound pressure level and the logarithm of flow rate follows a straight line relationship. However, with different perforation sizes, the intercept of the linear relationship changes, reducing the sound pressure level. Lighthill's power law indicates that the change in intercept corresponds to the logarithm of the ratio of the increased diameter to the original diameter. The reduction in sound pressure level observed in the CFD simulation correlates with the reduction in the DAS signal in field data. The findings of this study help to evaluate perforation diameter growth using DAS and interpret fluid distribution in fracture stimulation.

Multilayer Structure Damage Detection Using Optical Fiber Acoustic Sensing and Machine Learning.

Over the past decade, distributed acoustic sensing has been utilized for structural health monitoring in various applications, owing to its continuous measurement capability in both time and space and its ability to deliver extensive data on the conditions of large structures using just a single optical cable. This work aims to evaluate the performance of distributed acoustic sensing for monitoring a multilayer structure on a laboratory scale. The proposed structure comprises four layers: a medium-density fiberboard and three rigid polyurethane foam slabs. Three different damages were emulated in the structure: two in the first layer of rigid polyurethane foam and another in the medium-density fiberboard layer. The results include the detection of the mechanical wave, comparing the response with point sensors used for reference, and evaluating how the measured signal behaves in time and frequency in the face of different damages in the multilayer structure. The tests demonstrate that evaluating signals in both time and frequency domains presents different characteristics for each condition analyzed. The supervised support vector machine classifier was used to automate the classification of these damages, achieving an accuracy of 93%. The combination of distributed acoustic sensing with this learning algorithm creates the condition for developing a smart tool for monitoring multilayer structures.

Quality Control of DAS VSP Data in Desert Environment Using Simulations and Matching Filters.

The unconsolidated near surface and large, daily temperature variations in the desert environment degrade the vertical seismic profiling (VSP) data, posing the need for rigorous quality control. Distributed acoustic sensing (DAS) VSP data are often benchmarked using geophone surveys as a gold standard. This study showcases a new simulation-based way to assess the quality of DAS VSP acquired in the desert without geophone data. The depth uncertainty of the DAS channels in the wellbore is assessed by calibrating against formation depth based on the concept of conservation of the energy flux. Using the 1D velocity model derived from checkshot data, we simulate both DAS and geophone VSP data via an elastic pseudo-spectral finite difference method, and estimate the source and receiver signatures using matching filters. These field geophone data show high amplitude variations between channels that cannot be replicated in the simulation. In contrast, the DAS simulation shows a high visual similarity with the field DAS first arrival waveforms. The simulated source and receiver signatures are visually indistinguishable from the field DAS data in this study. Since under perfect conditions, the receiver signatures should be invariant with depth, we propose a new DAS data quality control metric based on local variations of the receiver signatures which does not require geophone measurements.

3D VSP Imaging Using DAS Recording of P- and S-Waves in Vertical and Lateral Well Sections in West Texas.

A 3D vertical seismic profiling (VSP) survey was acquired using a distributed acoustic sensing (DAS) system in the Permian Basin, West Texas. In total, 682 shot points from a pair of vibroseis units were recorded using optical fibers installed in a 9000 ft (2743 m) vertical part and 5000 ft (1524 m) horizontal reach of a well. Transmitted and reflected P, S, and converted waves were evident in the DAS data. From first-break P and S arrivals, we found average P-wave velocities of approximately 14,000 ft/s (4570 m/s) and S-wave velocities of 8800 ft/s (3000 m/s) in the deep section. We modified the conventional geophone VSP processing workflow and produced P-P reflection and P-S volumes derived from the well's vertical section. The Wolfcamp formation can be seen in two 3D volumes (P-P and P-S) from the vertical section of the well. They cover an area of 3000 ft (914 m) in the north-south direction and 1500 ft (460 m) in the west-east direction. Time slices showed coherent reflections, especially at 1.7 s (~11,000 ft), which was interpreted as the bottom of the Wolfcamp formation. Vp/Vs values from 2300 ft (701 m) -8800 ft (2682 m) interval range were between 1.7 and 2.0. These first data provide baseline images to compare to follow-up surveys after hydraulic fracturing as well as potential usefulness in extracting elastic properties and providing further indications of fractured volumes.

Seismic Monitoring of a Deep Geothermal Field in Munich (Germany) Using Borehole Distributed Acoustic Sensing.

Geothermal energy exploitation in urban areas necessitates robust real-time seismic monitoring for risk mitigation. While surface-based seismic networks are valuable, they are sensitive to anthropogenic noise. This study investigates the capabilities of borehole Distributed Acoustic Sensing (DAS) for local seismic monitoring of a geothermal field located in Munich, Germany. We leverage the operator's cloud infrastructure for DAS data management and processing. We introduce a comprehensive workflow for the automated processing of DAS data, including seismic event detection, onset time picking, and event characterization. The latter includes the determination of the event hypocenter, origin time, seismic moment, and stress drop. Waveform-based parameters are obtained after the automatic conversion of the DAS strain-rate to acceleration. We present the results of a 6-month monitoring period that demonstrates the capabilities of the proposed monitoring set-up, from the management of DAS data volumes to the establishment of an event catalog. The comparison of the results with seismometer data shows that the phase and amplitude of DAS data can be reliably used for seismic processing. This emphasizes the potential of improving seismic monitoring capabilities with hybrid networks, combining surface and downhole seismometers with borehole DAS. The inherent high-density array configuration of borehole DAS proves particularly advantageous in urban and operational environments. This study stresses that realistic prior knowledge of the seismic velocity model remains essential to prevent a large number of DAS sensing points from biasing results and interpretation. This study suggests the potential for a gradual extension of the network as geothermal exploitation progresses and new wells are equipped, owing to the scalability of the described monitoring system.

Characterization of Gas-Liquid Two-Phase Slug Flow Using Distributed Acoustic Sensing in Horizontal Pipes.

This article discusses the use of distributed acoustic sensing (DAS) for monitoring gas-liquid two-phase slug flow in horizontal pipes, using standard telecommunication fiber optics connected to a DAS integrator for data acquisition. The experiments were performed in a 14 m long, 5 cm diameter transparent PVC pipe with a fiber cable helically wrapped around the pipe. Using mineral oil and compressed air, the system captured various flow rates and gas-oil ratios. New algorithms were developed to characterize slug flow using DAS data, including slug frequency, translational velocity, and the lengths of slug body, slug unit, and the liquid film region that had never been discussed previously. This study employed a high-speed camera next to the fiber cable sensing section for validation purposes and achieved a good correlation among the measurements under all conditions tested. Compared to traditional multiphase flow sensors, this technology is non-intrusive and offers continuous, real-time measurement across long distances and in harsh environments, such as subsurface or downhole conditions. It is cost-effective, particularly where multiple measurement points are required. Characterizing slug flow in real time is crucial to many industries that suffer slug-flow-related issues. This research demonstrated the DAS's potential to characterize slug flow quantitively. It will offer the industry a more optimal solution for facility design and operation and ensure safer operational practices.

How the Material Characteristics of Optical Fibers and Soil Influence the Measurement Results of Distributed Acoustic Sensing.

Fiber optic distributed acoustic sensing (DAS) technology is widely used in security surveillance and geophysical survey applications. The response of the DAS system to external vibrations varies with different types of fiber optic cable connections. The mechanism of mutual influence between the cable's characteristics and DAS measurement results remains unclear. This study proposed a dynamic model of the interaction between the optical cable and the soil, analyzed the impact of the dynamic parameters of the optical cable and soil on the sensitivity of the DAS system, and validated the theoretical analysis through experiments. The findings suggest that augmenting the cable's bending stiffness 5.5-fold and increasing its unit mass 4.2-fold result in a discernible reduction of the system's response to roughly 0.15 times of its initial magnitude. Cables with lower unit mass and bending stiffness are more sensitive to vibration signals. This research provides a foundation for optimizing vibration-enhanced fiber optic cables and broadening the potential usage scenarios for DAS systems.

Principles and Applications of Seismic Monitoring Based on Submarine Optical Cable.

Submarine optical cables, utilized as fiber-optic sensors for seismic monitoring, are gaining increasing interest because of their advantages of extending the detection coverage, improving the detection quality, and enhancing long-term stability. The fiber-optic seismic monitoring sensors are mainly composed of the optical interferometer, fiber Bragg grating, optical polarimeter, and distributed acoustic sensing, respectively. This paper reviews the principles of the four optical seismic sensors, as well as their applications of submarine seismology over submarine optical cables. The advantages and disadvantages are discussed, and the current technical requirements are concluded, respectively. This review can provide a reference for studying submarine cable-based seismic monitoring.

Traffic Vibration Signal Analysis of DAS Fiber Optic Cables with Different Coupling Based on an Improved Wavelet Thresholding Method.

Distributed Acoustic Sensing (DAS) is a novel technology that uses fiber optics to sense and monitor vibrations. It has demonstrated immense potential for various applications, including seismology research, traffic vibration detection, structural health inspection, and lifeline engineering. DAS technology transforms long sections of fiber optic cables into a high-density array of vibration sensors, providing exceptional spatial and temporal resolution for real-time monitoring of vibrations. Obtaining high-quality vibration data using DAS requires a robust coupling between the fiber optic cable and the ground layer. The study utilized the DAS system to detect vibration signals generated by vehicles operating on the campus road of Beijing Jiaotong University. Three distinct deployment methods were employed: the uncoupled fiber on the road, the underground communication fiber optic cable ducts, and the cement-bonded fixed fiber optic cable on the road shoulder, and compared for their outcomes. Vehicle vibration signals under the three deployment methods were analyzed using an improved wavelet threshold algorithm, which was verified to be effective. The results indicate that for practical applications, the most effective deployment method is the cement-bonded fixed fiber optic cable on the road shoulder, followed by the uncoupled fiber on the road, and the underground communication fiber optic cable ducts are the least effective. This has important implications for the future development of DAS as a tool for various fields.

Finding Well-Coupled Optical Fiber Locations for Railway Monitoring Using Distributed Acoustic Sensing.

Distributed acoustic sensors (DAS) utilize optical fibers to monitor vibrations across thousands of independent locations. However, the measured acoustic waveforms experience significant variations along the sensing fiber. These differences primarily arise from changes in coupling between the fiber and its surrounding medium as well as acoustic interferences. Here, a correlation-based method is proposed to automatically find the spatial locations of DAS where temporal waveforms are repeatable. Signal repeatability is directly associated with spatial monitoring locations with both good coupling and low acoustic interference. The DAS interrogator employed is connected to an over 30-year-old optical fiber installed alongside a railway track. Thus, the optical fiber exhibits large coupling changes and different installation types along its path. The results indicate that spatial monitoring locations with good temporal waveform repeatability can be automatically discriminated using the proposed method. The correlation between the temporal waveforms acquired at locations selected by the algorithm proved to be very high considering measurements taken for three days, the first two on consecutive days and the third one a month after the first measurement.

Diffusion Model for DAS-VSP Data Denoising.

Distributed acoustic sensing (DAS) has emerged as a transformational technology for seismic data acquisition. However, noise remains a major impediment, necessitating advanced denoising techniques. This study pioneers the application of diffusion models, a type of generative model, for DAS vertical seismic profile (VSP) data denoising. The diffusion network is trained on a new generated synthetic dataset that accommodates variations in the acquisition parameters. The trained model is applied to suppress noise in synthetic and field DAS-VSP data. The results demonstrate the model's effectiveness in removing various noise types with minimal signal leakage, outperforming conventional methods. This research signifies diffusion models' potential for DAS processing.

On the Comparison of Records from Standard and Engineered Fiber Optic Cables at Etna Volcano (Italy).

Distributed Dynamic Strain Sensing (DDSS), also known as Distributed Acoustic Sensing (DAS), is becoming a popular tool in array seismology. A new generation of engineered fibers is being developed to improve sensitivity and reduce the noise floor in comparison to standard fibers, which are conventionally used in telecommunication networks. Nevertheless, standard fibers already have extensive coverage around the Earth's surface, so it motivates the use of the existing infrastructure in DDSS surveys to avoid costs and logistics. In this study, we compare DDSS data from stack instances of standard multi-fiber cable with DDSS data from a co-located single-fiber engineered cable. Both cables were buried in an area located 2.5 km NE from the craters of Mt. Etna. We analyze how stacking can improve signal quality. Our findings indicate that the stack of DDSS records from five standard fiber instances, each 1.5 km long, can reduce optical noise of up to 20%. We also present an algorithm to correct artifacts in the time series that stem from dynamic range saturation. Although stacking is able to reduce optical noise, it is not sufficient for restoring the strain-rate amplitude from saturated signals in standard fiber DDSS. Nevertheless, the algorithm can restore the strain-rate amplitude from saturated DDSS signals of the engineered fiber, allowing us to exceed the dynamic range of the record. We present measurement strategies to increase the dynamic range and avoid saturation.

Few-Shot Classification with Meta-Learning for Urban Infrastructure Monitoring Using Distributed Acoustic Sensing.

This paper studies an advanced machine learning method, specifically few-shot classification with meta-learning, applied to distributed acoustic sensing (DAS) data. The study contributes two key aspects: (i) an investigation of different pre-processing methods for DAS data and (ii) the implementation of a neural network model based on meta-learning to learn a representation of the processed data. In the context of urban infrastructure monitoring, we develop a few-shot classification framework that classifies query samples with only a limited number of support samples. The model consists of an embedding network trained on a meta dataset for feature extraction and is followed by a classifier for performing few-shot classification. This research thoroughly explores three types of data pre-processing, that is, decomposed phase, power spectral density, and frequency energy band, as inputs to the neural network. Experimental results show the efficient learning capabilities of the embedding model when working with various pre-processed data, offering a range of pre-processing options. Furthermore, the results demonstrate outstanding few-shot classification performance across a large number of event classes, highlighting the framework's potential for urban infrastructure monitoring applications.

A Methodology for In-Well Multiphase Flow Measurement with Strategically Positioned Local and/or Distributed Acoustic Sensors.

A new three-phase downhole flow measurement methodology is developed based on measurements of speed of sound at different locations along the well, where the pressure is greater than the bubble-point pressure at the first location and smaller at the second location. A bulk velocity measurement is also required at the second location. The fluid at the first location is a mixture of two phases, but becomes a mixture of three phases at the second location due to the liberation of gas from the oil phase. The flow equations are first solved for two-phase flow at the first location to obtain the first phase fraction, water-in-liquid ratio, and then this information is fed into the flow equations after adjustment to the local pressure and temperature conditions to solve for three-phase flow at the second location to obtain the second phase fraction, namely the liquid volume fraction. These two phase fractions along with the bulk velocity at the second location are sufficient to calculate the three-phase flow rates. The methodology is fully explained and the analytical solutions for three-phase flow measurement is explicitly provided in a step-by-step process. A Lego-like approach may be used with various sensor technologies to obtain the required measurements, although distributed acoustic sensing systems and optical flowmeters are ideal to easily and efficiently adopt the current methodology. This game-changing new methodology for measuring downhole three-phase flow can be implemented in existing wells with an optical infrastructure by adding a topside optoelectronics system.

Detection of Gas Pipeline Leakage Using Distributed Optical Fiber Sensors: Multi-Physics Analysis of Leakage-Fiber Coupling Mechanism in Soil Environment.

Optical fiber sensors are newly established gas pipeline leakage monitoring technologies with advantages, including high detection sensitivity to weak leaks and suitability for harsh environments. This work presents a systematic numerical study on the multi-physics propagation and coupling process of the leakage-included stress wave to the fiber under test (FUT) through the soil layer. The results indicate that the transmitted pressure amplitude (hence the axial stress acted on FUT) and the frequency response of the transient strain signal strongly depends on the types of soil. Furthermore, it is found that soil with a higher viscous resistance is more favorable to the propagation of spherical stress waves, allowing FUT to be installed at a longer distance from the pipeline, given the sensor detection limit. By setting the detection limit of the distributed acoustic sensor to 1 nε, the feasible range between FUT and the pipeline for clay, loamy soil and silty sand is numerically determined. The gas-leakage-included temperature variation by the Joule-Thomson effect is also analyzed. Results provide a quantitative criterion on the installation condition of distributed fiber sensors buried in soil for the great-demanding gas pipeline leakage monitoring applications.

Long-Range Traffic Monitoring Based on Pulse-Compression Distributed Acoustic Sensing and Advanced Vehicle Tracking and Classification Algorithm.

We introduce a novel long-range traffic monitoring system for vehicle detection, tracking, and classification based on fiber-optic distributed acoustic sensing (DAS). High resolution and long range are provided by the use of an optimized setup incorporating pulse compression, which, to our knowledge, is the first time that is applied to a traffic-monitoring DAS system. The raw data acquired with this sensor feeds an automatic vehicle detection and tracking algorithm based on a novel transformed domain that can be regarded as an evolution of the Hough Transform operating with non-binary valued signals. The detection of vehicles is performed by calculating the local maxima in the transformed domain for a given time-distance processing block of the detected signal. Then, an automatic tracking algorithm, which relies on a moving window paradigm, identifies the trajectory of the vehicle. Hence, the output of the tracking stage is a set of trajectories, each of which can be regarded as a vehicle passing event from which a vehicle signature can be extracted. This signature is unique for each vehicle, allowing us to implement a machine-learning algorithm for vehicle classification purposes. The system has been experimentally tested by performing measurements using dark fiber in a telecommunication fiber cable running in a buried conduit along 40 km of a road open to traffic. Excellent results were obtained, with a general classification rate of 97.7% for detecting vehicle passing events and 99.6% and 85.7% for specific car and truck passing events, respectively.

Blast-Assisted Subsurface Characterisation Using a Novel Distributed Acoustic Sensing Setup Based on Geometric Phases.

A novel DAS setup based on geometric phases in coherent heterodyne detection is applied for the first time to the characterisation of the Earth's subsurface. In addition, an optimisation of the proposed setup in terms of its spatial resolution is also presented for the first time. The surface waves are generated by strong blasts of 25 kg of explosives at a dedicated test site. A 10 km dark fiber link in the vicinity of the test site connected to the test setup records the resulting strain signals. The spike-free and low-noise strain data thus obtained minimize post-processing requirements, making the setup a candidate for real-time seismic monitoring. An analysis of the dispersion characteristics of the generated surface waves is performed using a recently reported optimised seismic interferometric technique. Based on the dispersion characteristics, the shear wave velocities of the surface waves as a function of the depth profile of the Earth's crust are determined using an optimised evolutionary algorithm.

Brillouin-Scattering Induced Noise in DAS: A Case Study.

In the paper, the effect of spontaneous Brillouin scattering (SpBS) is analyzed as a noise source in distributed acoustic sensors (DAS). The intensity of the SpBS wave fluctuates over time, and these fluctuations increase the noise power in DAS. Based on experimental data, the probability density function (PDF) of the spectrally selected SpBS Stokes wave intensity is negative exponential, which corresponds to the known theoretical conception. Based on this statement, an estimation of the average noise power induced by the SpBS wave is given. This noise power equals the square of the average power of the SpBS Stokes wave, which in turn is approximately 18 dB lower than the Rayleigh backscattering power. The noise composition in DAS is determined for two configurations, the first for the initial backscattering spectrum and the second for the spectrum in which the SpBS Stokes and anti-Stokes waves are rejected. It is established that in the analyzed particular case, the SpBS noise power is dominant and exceeds the powers of the thermal, shot, and phase noises in DAS. Accordingly, by rejecting the SpBS waves at the photodetector input, it is possible to reduce the noise power in DAS. In our case, this rejection is carried out by an asymmetric Mach-Zehnder interferometer (MZI). The rejection of the SpBS wave is most relevant for broadband photodetectors, which are associated with the use of short probing pulses to achieve short gauge lengths in DAS.

The Impact of Rayleigh Scattering in UWFBG Array-Based Φ-OTDR and Its Suppression Method.

Ultra-weak fiber Bragg grating (UWFBG) array-based phase-sensitive optical time-domain reflectometry (Φ-OTDR) utilizes the interference interaction between the reference light and the reflected light from the broadband gratings for sensing. It significantly improves the performance of the distributed acoustic sensing system (DAS) because the intensity of the reflected signal is much higher than that of the Rayleigh backscattering. This paper shows that Rayleigh backscattering (RBS) has become one of the primary noise sources in the UWFBG array-based Φ-OTDR system. We reveal the impact of the Rayleigh backscattering signal on the intensity of the reflective signal and the precision of the demodulated signal, and we suggest reducing the pulse duration to improve the demodulation accuracy. Experimental results demonstrate that using light with a 100 ns pulse duration can improve the measurement precision by three times compared with the use of a 300 ns pulse duration.