Insight into Surface Electronic Effects on Pd Nanostructures as Efficient Electrocatalysts.

Although the unique properties of nanomaterials have endowed enzyme-mimic catalysts with broad applications, the development of catalysts still relies on trial-and-error strategies without predictive indicators. Surface electronic structures have rarely been studied in enzyme-mimic catalysts. Herein, we present a platform for understanding the impact of surface electronic structures on electrocatalysis toward H2O2 decomposition, using the Pd icosahedra (Pd ico), Pd octahedra (Pd oct) and Pd cubic nanocrystals as electrocatalysts. The electronic properties on Pd were modulated with a correlation of surface orientation. We revealed the relationship between the electronic properties and electrocatalytic performance, in which the surface electron accumulation can boost the electrocatalytic activity of the enzyme-mimic catalysts. As a result, the Pd icodimer exhibits the highest electrocatalytic and sensing efficiency. This work offers new perspectives for the investigation of structure-activity relationships and provides an effective knob for utilizing the surface electronic structures to boost the catalytic performance for enzyme-mimics.

Electronic Effects in a Green Protocol for (Hetero)Aryl-S Coupling.

Aryl and heteroaryl iodides have been efficiently converted into the corresponding thioacetates in cyclopentyl methyl ether (CPME), a green solvent, under Cu catalysis. The chemoselectivity of the reaction is mainly controlled by electronic factors, enabling the conversion of both electron-rich and electron-deficient substrates into the corresponding thioacetates in good to excellent yields. The products can be easily deprotected to the corresponding thiolates to carry out additional synthetic transformations in situ. Surprisingly, despite CPME's relatively low dielectric constant, the reaction rate significantly increased when conducted under microwave irradiation conditions. This synthetic methodology exhibits a remarkable tolerance to functional groups, mild reaction conditions, and a wide substrate scope, utilizing a safe and inexpensive CuI pre-catalyst in the green solvent CPME. A non-aqueous workup allowing for the complete recovery of both catalyst and solvent makes this approach an environmentally sustainable protocol for C(sp2) sulfur functionalization. Additionally, the reaction shows selective cross-coupling with iodides in competition with chlorides and bromides, allowing its use in multistep syntheses. To demonstrate the potential of this methodology, it was applied to the high-yield synthesis of a photochromic dithienylethene, where a selective synthesis had not been reported before.

Integrating Host Design and Tailored Electronic Effects of Yolk-Shell Zn-Mn Diatomic Sites for Efficient CO2 Electroreduction.

Modulating the surface and spatial structure of the host is associated with the reactivity of the active site, and also enhances the mass transfer effect of the CO2 electroreduction process (CO2 RR). Herein, we describe the development of two-step ligand etch-pyrolysis to access an asymmetric dual-atomic-site catalyst (DASC) composed of a yolk-shell carbon framework (Zn1 Mn1 -SNC) derived from S,N-coordinated Zn-Mn dimers anchored on a metal-organic framework (MOF). In Zn1 Mn1 -SNC, the electronic effects of the S/N-Zn-Mn-S/N configuration are tailored by strong interactions between Zn-Mn dual sites and co-coordination with S/N atoms, rendering structural stability and atomic distribution. In an H-cell, the Zn1 Mn1 -SNC DASC shows a low onset overpotential of 50 mV and high CO Faraday efficiency of 97 % with a low applied overpotential of 343 mV, thus outperforming counterparts, and in a flow cell, it also reaches a high current density of 500 mA cm-2 at -0.85 V, benefitting from the high structure accessibility and active dual sites. DFT simulations showed that the S,N-coordinated Zn-Mn diatomic site with optimal adsorption strength of COOH* lowers the reaction energy barrier, thus boosting the intrinsic CO2 RR activity on DASC. The structure-property correlation found in this study suggests new ideas for the development of highly accessible atomic catalysts.

Encapsulating Ni Nanoparticles into Interlayers of Nitrogen-Doped Nb2 CTx MXene to Boost Hydrogen Evolution Reaction in Acid.

Design and development of low-cost and highly efficient non-precious metal electrocatalysts for hydrogen evolution reaction (HER) in an acidic medium are key issues to realize the commercialization of proton exchange membrane water electrolyzers. Ni is regarded as an ideal alternative to substitute Pt for HER based on the similar electronic structure and low price as well. However, low intrinsic activity and poor stability in acid restrict its practical applications. Herein, a new approach is reported to encapsulate Ni nanoparticles (NPs) into interlayer edges of N-doped Nb2 CTx MXene (Ni NPs@N-Nb2 CTx ) by an electrochemical process. The as-prepared Ni NPs@N-Nb2 CTx possesses Pt-like onset potentials and can reach 500 mA cm-2 at overpotentials of only 383 mV, which is much higher than that of N-Nb2 CTx supported Ni NPs synthesized by a wet-chemical method (w- Ni NPs/N-Nb2 CTx ). Furthermore, it shows high durability toward HER with a large current density of 300 mA cm-2 for 24 h because of the encapsulated structure against corrosion, oxidation as well as aggregation of Ni NPs in an acidic medium. Detailed structural characterization and density functional theory calculations reveal that the stronger interaction boosts the HER.

The Ultrashort Spike-Ring Interaction in Substituted Iron Maiden Molecules.

The in forms of molecular iron maidens are known for their unique ultrashort interaction between the apical hydrogen atom or its small substituent and the surface of the benzene ring. It is generally believed that this forced ultrashort X⋯π contact is associated with high steric hindrance, which is responsible for specific properties of iron maiden molecules. The main aim of this article is to investigate the influence of significant charge enrichment or depletion of the benzene ring on the characteristics of the ultrashort C-X⋯π contact in iron maiden molecules. For this purpose, three strongly electron-donating (-NH2) or strongly electron-withdrawing (-CN) groups were inserted into the benzene ring of in-[34,10][7]metacyclophane and its halogenated (X = F, Cl, Br) derivatives. It is shown that, despite such extremely electron-donating or electron-accepting properties, the considered iron maiden molecules surprisingly reveal quite high resistance to changes in electronic properties.

Carbonate-induced enhancement of phenols degradation in CuS/peroxymonosulfate system: A clear correlation between this enhancement and electronic effects of phenols substituents.

This study investigated the enhancement effects of dissolved carbonates on the peroxymonosulfate-based advanced oxidation process with CuS as a catalyst. It was found that the added CO32- increased both the catalytic activity and the stability of the catalyst. Under optimized reaction conditions in the presence of CO32-, the degradation removal of 4-methylphenol (4-MP) within 2 min reached 100%, and this was maintained in consecutive multi-cycle experiments. The degradation rate constant of 4-MP was 2.159 min-1, being 685% greater than that in the absence of CO32- (0.315 min-1). The comparison of dominated active species and 4-MP degradation pathways in both CO32--free and CO32--containing systems suggested that more CO3•-/1O2 was produced in the case of CO32-deducing an electron transfer medium, which tending to react with electron-rich moieties. Meanwhile, Characterization by X-ray photoelectron spectroscopic and cyclic voltammetry measurement verified CO32- enabled the effective reduction of Cu2+ to Cu+. By investigating the degradation of 11 phenolics with different substituents, the dependence of degradation kinetic rate constant of the phenolics on their chemical structures indicated that there was a good linear relationship between the Hammett constants σp of the aromatic phenolics and the logarithm of k in the CO32--containing system. This work provides a new strategy for efficient removal of electron-rich moieties under the driving of carbonate being widely present in actual water bodies.

Exceptionally Long Covalent CC Bonds-A Local Vibrational Mode Study.

For decades one has strived to synthesize a compound with the longest covalent C-C bond applying predominantly steric hindrance and/or strain to achieve this goal. On the other hand electronic effects have been added to the repertoire, such as realized in the electron deficient ethane radical cation in its D3d form. Recently, negative hyperconjugation effects occurring in diamino-o-carborane analogs such as di-N,N-dimethylamino-o-carborane have been held responsible for their long C-C bonds. In this work we systematically analyzed CC bonding in a diverse set of 53 molecules including clamped bonds, highly sterically strained complexes such as diamondoid dimers, electron deficient species, and di-N,N-dimethylamino-o-carborane to cover the whole spectrum of possibilities for elongating a covalent C-C bond to the limit. As a quantitative intrinsic bond strength measure, we utilized local vibrational CC stretching force constants ka(CC) and related bond strength orders BSO n(CC), computed at the ωB97X-D/aug-cc-pVTZ level of theory. Our systematic study quantifies for the first time that whereas steric hindrance and/or strain definitely elongate a C-C bond, electronic effects can lead to even longer and weaker C-C bonds. Within our set of molecules the electron deficient ethane radical cation, in D3d symmetry, acquires the longest C-C bond with a length of 1.935 Å followed by di-N,N-dimethylamino-o-carborane with a bond length of 1.930 Å. However, the C-C bond in di-N,N-dimethylamino-o-carborane is the weakest with a BSO n value of 0.209 compared to 0.286 for the ethane radical cation; another example that the longer bond is not always the weaker bond. Based on our findings we provide new guidelines for the general characterization of CC bonds based on local vibrational CC stretching force constants and for future design of compounds with long C-C bonds.

Stabilizing a different cyclooctatetraene stereoisomer.

An unconventional cis-cis-cis-trans or (Z,Z,Z,E) structure B of cyclooctatetraene (COT) is calculated to lie only 23 kcal/mol above the well-known tub-shaped (Z,Z,Z,Z) isomer A; one example of this type of structure is known. The barrier for B returning to A is small, 3 kcal/mol. However, by suitable choice of substituents, the (Z,Z,Z,E) isomer can be made to lie in energy below the tub-shaped structure. Steric, clamping, and electronic strategies are proposed for achieving this. In the steric strategy, the C8H4(CH3)2(C( t Bu)3)2 structure B is predicted to lie 21 kcal/mol below structure A, which is separated from form B only by a small barrier. A simple clamping strategy, effective for COT planarization, does not influence the A/B isomerization much. But, if the clamping group is aromatic (a fused benzene, pyrrole, thiophene, furan), the subtle interplay of potential aromaticity with clamping can be used to confer persistence if not stability on the (Z,Z,Z,E) isomer. An electronic strategy of a different kind, push-pull substitution on the COT ring, was not very effective in stabilizing the B form. However, it led us to vicinal amine-borane-substituted normal COTs that proved to be quite good at activating H2 in a frustrated Lewis pair scenario.

Enhanced CO2 Electroreduction on Neighboring Zn/Co Monomers by Electronic Effect.

It is of great significance to reveal the detailed mechanism of neighboring effects between monomers, as they could not only affect the intermediate bonding but also change the reaction pathway. This paper describes the electronic effect between neighboring Zn/Co monomers effectively promoting CO2 electroreduction to CO. Zn and Co atoms coordinated on N doped carbon (ZnCoNC) show a CO faradaic efficiency of 93.2 % at -0.5 V versus RHE during a 30-hours test. Extended X-ray absorption fine structure measurements (EXAFS) indicated no direct metal-metal bonding and X-ray absorption near-edge structure (XANES) showed the electronic effect between Zn/Co monomers. In situ attenuated total reflection-infrared spectroscopy (ATR-IR) and density functional theory (DFT) calculations further revealed that the electronic effect between Zn/Co enhanced the *COOH intermediate bonding on Zn sites and thus promoted CO production. This work could act as a promising way to reveal the mechanism of neighboring monomers and to influence catalysis.

(NHC)NiH-Catalyzed Regiodivergent Cross-Hydroalkenylation of Vinyl Ethers with α-Olefins: Syntheses of 1,2- and 1,3-Disubstituted Allyl Ethers.

Cross-hydroalkenylation of a vinyl ether (1) with an α-olefin (2) was first achieved by a set of [NHC-Ni(allyl)]BArF (NHC=N-heterocyclic carbene) catalysts. Both 1,2- and 1,3-disubstituted allyl ethers were obtained, highly selectively, by using NHCs of different sizes. In contrast, the chemoselectivity (i.e., 1 as acceptor and 2 as donor) was controlled mostly by electronic effects through the catalyst-substrate interaction. Sterically bulkier alkenes (2) were used as preferred donors compared to smaller alkenes. This electronic effect also served as a basis for the first tail-to-head cross-hydroalkenylations of 1 with either a vinyl silane or boronic ester.

Impact of the Long-Range Electronic Effect of a Fluorous Ponytail on Metal Coordination during Solvent Extraction.

With the need for a precise description of the long-range electronic effects of a perfloroalkyl chain (F-ponytail) grafted onto metal chelators, we studied in detail the effect of a spacer inserted between the polar complexing head and the F-ponytail, in relation to the metal coordination ability of the resulting molecules. The prepared molecules were then applied for the extraction of various metals from an aqueous phase into an organic phase, and the optimum spacer length could be estimated to be between three and four methylene units, according to the extraction conditions. The study also revealed the difficulty of modeling and anticipating the tiny energy differences involved in the extraction process and the importance in peculiar cases to go beyond only these studied inductive effects to understand better the factors that govern the stabilization of a metallic cation in a complex fluorous phase.

Regioselective, Asymmetric Formal Hydroamination of Unactivated Internal Alkenes.

We report the regioselective and enantioselective formal hydroamination of unsymmetrical internal alkenes catalyzed by a copper catalyst ligated by DTBM-SEGPHOS. The regioselectivity of the reaction is controlled by the electronic effects of ether, ester, and sulfonamide groups in the homoallylic position. The observed selectivity underscores the influence of inductive effects of remote substituents on the selectivity of catalytic processes occurring at hydrocarbyl groups, and the method provides direct access to various 1,3-aminoalcohol derivatives with high enantioselectivity.

Exploring the consequences of a representative "disallowed" conformation of Aib on a 310-helical fold.

The structural effects of a representative "disallowed" conformation of Aib on the 3(10)-helical fold of an octapeptidomimetic are explored. The 1D ((1)H, (13)C) & 2D NMR, FT-IR and CD data reveal that the octapeptide 1, adopts a 3(10)-helical conformation in solution, as it does in its crystal structure. The C-terminal methyl carboxylate (CO2Me) of 1 was modified into an 1,3-oxazine (Oxa) functional group in the peptidomimetic 2. This modification results in the stabilization of the backbone of the C-terminal Aib (Aib*-Oxa) of 2, in a conformation (ϕ, ψ = 180, 0) that is natively disallowed to Aib. Consequent to the presence of this natively disallowed conformation, the 3(10)-helical fold is not disrupted in the body of the peptidomimetic 2. But the structural distortions that do occur in 2 are primarily in residues in the immediate vicinity of the natively disallowed conformation, rather than in the whole peptide body. Non-native electronic effects resulting from modifications in backbone functional groups can be at the origin of stabilizing residues in natively disallowed conformations.

Steric and electronic interactions controlling the cis/trans isomer equilibrium at X-Pro tertiary amide motifs in solution.

A systematic understanding of the noncovalent interactions that influence the structures of the cis conformers and the equilibrium between the cis and the trans conformers, of the X-Pro tertiary amide motifs, is presented based on analyses of (1)H-, (13)C-NMR and FTIR absorption spectra of two sets of homologous peptides, X-Pro-Aib-OMe and X-Pro-NH-Me (where X is acetyl, propionyl, isobutyryl and pivaloyl), in solvents of varying polarities. First, this work shows that the cis conformers of any X-Pro tertiary amide motif, including Piv-Pro, are accessible in the new motifs X-Pro-Aib-OMe, in solution. These conformers are uniquely observable by FTIR spectroscopy at ambient temperatures and by NMR spectroscopy from temperatures as high as 273 K. This is made possible by the persistent presence of n(i-1) →π(i)* interactions at Aib, which also influence the disappearance of steric effects at these cis X-Pro rotamers. Second, contrary to conventional understanding, the energy contribution of steric effects to the cis/trans equilibrium at the X-Pro motifs is found to be nonvariant (0.54 ± 0.02 kcal/mol) with increase in steric bulk on the X group. Third, the current studies provide direct evidence for the weak intramolecular interactions namely the n(i-1) →π(i)*, the N(Pro) •••H(i+1) (C5a), and the C7 hydrogen bond that operate and influence the structures, stabilities, and dynamics between different conformational states of X-Pro tertiary amide motifs. NMR and IR spectral data suggest that the cis conformers of X-Pro motifs are ensembles of short-lived rotamers about the C'(X)-N(Pro) bond.

Electrospray ionization tandem mass spectrometry of 4-aryl-3,4-dihydrocoumarins.

We have investigated the gas-phase fragmentation reactions of 11 synthetic 4-aryl-3,4-dihydrocoumarins by electrospray ionization tandem mass spectrometry (ESI-MS/MS) on a quadrupole-time-of flight (Q-TOF) hybrid mass spectrometer. We have also estimated thermochemical data for the protonated coumarins (precursor ion A) and product ion structures by computational chemistry at a B3LYP level of theory to establish the ion structures and to rationalize the fragmentation pathways. The most abundant ions in the product ion spectra of coumarins 1-11 resulted from C8H8O2, CO2, C4H4O3, C8H10O3, C8H8O2, and CH3OH eliminations through retro-Diels-Alder (RDA) reactions, remote hydrogen rearrangements (ß-eliminations), and ß-lactone ring contraction. Although the investigated coumarins shared most of the fragmentation pathways, formation of a benzylic product ion and its corresponding tropylium ion was diagnostic of the substituents at ring C. The thermochemical data revealed that the nature and position of the substituents at ring C played a key role in the formation of this product ion and determined its relative intensity in the product ion spectrum. The results of this study contribute to knowledge of the gas-phase ion chemistry of this important class of organic compounds.

A modified two temperature molecular dynamics (2T-MD) model for cascades.

Two-Temperature molecular dynamics (2T-MD) is a common approach for describing how electrons contribute to the evolution of a damage cascade by addressing their role in the redistribution of energy in the system. However, inaccuracies in 2T-MD's treatment of the high-energy particles have limited its utilisation. Here, we propose a reformulation of the traditional 2T-MD scheme to overcome this limitation by addressing the spurious double-interaction of high-energy atoms with electrons. We conduct a series of radiation damage cascades for 30, 50, and 100 keV primary knock-on atoms in increasingly large cubic W cells. In the simulations, we employ our modified 2T-MD scheme along with other treatments of electron-phonon coupling to explore their impact on the cascade evolution and the number of remnant defects. The results suggest that with the proposed modification, 2T-MD simulations account for the temperature time evolution during the ballistic phase and remove arbitrary choices, thus providing a better description of the underlying physics of the damage process.

Enantioselective Biomimetic Structures Inspired by Oxi-Dase-Type Metalloenzymes, Utilizing Polynuclear Compounds Containing Copper (II) and Manganese (II) Ions as Building Blocks.

This study focuses on developing and evaluating two novel enantioselective biomimetic models for the active centers of oxidases (ascorbate oxidase and catalase). These models aim to serve as alternatives to enzymes, which often have limited action and a delicate nature. For the ascorbate oxidase (AO) model (compound 1), two enantiomers, S,S(+)cpse and R,R(-)cpse, were combined in a crystalline structure, resulting in a racemic compound. The analysis of their magnetic properties and electrochemical behavior revealed electronic transfer between six metal centers. Compound 1 effectively catalyzed the oxidation of ascorbic to dehydroascorbic acid, showing a 45.5% yield for the racemic form. This was notably higher than the enantiopure compounds synthesized previously and tested in the current report, which exhibited yields of 32% and 28% for the S,S(+)cpse and R,R(-)cpse enantiomers, respectively. This outcome highlights the influence of electronic interactions between metal ions in the racemic compound compared to pure enantiomers. On the other hand, for the catalase model (compound 2), both the compound and its enantiomer displayed polymeric properties and dimeric behavior in the solid and solution states, respectively. Compound 2 proved to be effective in catalyzing the oxidation of hydrogen peroxide to oxygen with a yield of 64.7%. In contrast, its enantiomer (with R,R(-)cpse) achieved only a 27% yield. This further validates the functional nature of the prepared biomimetic models for oxidases. This research underscores the importance of understanding and designing biomimetic models of metalloenzyme active centers for both biological and industrial applications. These models show promising potential as viable alternatives to natural enzymes in various processes.

Regulating Intramolecular Electron Transfer of Nickel-Based Coordinations through Ligand Engineering for Aqueous Batteries.

The integration of electronic effects into complexes for the construction of novel materials has not yet attracted significant attention in the field of energy storage. In the current study, eight one-dimensional (1D) nickel-based salicylic acid  complexes (Ni-XSAs, X = pH, pMe, pMeO, mMe, pBr, pCl, pF, and pCF3 ), are prepared by ligand engineering. The coordination environments in the Ni-XSAs are explored using X-ray absorption fine structure spectroscopy. The charge transfer of the complexes is modulated according to the difference in the electron-donating ability of the substituents, in combination with frontier orbital theory. Furthermore, density functional theory is used to investigate the effect of the substituent position on the electronic properties of the complexes. Ni-mMeSA exhibits better electrical conductivity than Ni-pMeSA. The electrochemical performance of Ni-mMeSA as an aqueous battery cathode is remarkably improved with a maximum energy density of 0.30 mWh cm-2 (125 Wh kg-1 ) and a peak power density of 33.72 mW cm-2 (14.03 kW kg-1 ). This study provides ideas for the application of new coordination chemistry in the field of energy materials science.

Universal Synthesized Strategy for Amorphous Pd-Based Nanosheets Boosting Ambient Ammonia Electrosynthesis.

The electrocatalytic nitrogen reduction reaction (NRR) is emerging as a great promise for ambient and sustainable NH3 production while it still suffers from the high adsorption energy of N2 , the difficulty of *NN protonation, and inevitable hydrogen evolution, leading to a great challenge for efficient NRR. Herein, we synthesized a series of amorphous trimetal Pd-based (PdCoM (M = Cu, Ag, Fe, Mo)) nanosheets (NSs) with an ultrathin 2D structure, which shows high efficiency and robust electrocatalytic nitrogen fixation. Among them, amorphous PdCoCu NSs exhibit excellent NRR activity at low overpotentials with an NH3 yield of 60.68 µg h-1 mgcat -1 and a corresponding Faraday efficiency of 42.93% at -0.05 V versus reversible hydrogen electrode as well as outstanding stability with only 5% decrease after a long test period of 40 h at room temperature. The superior NRR activity and robust stability should be attributed to the large specific surface area, abundant active sites as well as structural engineering and electronic effect that boosts up the Pd 4d band center, which further efficiently restrains the hydrogen evolution. This work offers an opportunity for more energy conversion devices through the novel strategy for designing active and stable catalysts.

Alkene selenenylation: A comprehensive analysis of relative reactivities, stereochemistry and asymmetric induction, and their comparisons with sulfenylation.

A broad perspective of various factors influencing alkene selenenylation has been developed by concurrent detailed analysis of key experimental and theoretical data, such as asymmetric induction, stereochemistry, relative reactivities, and comparison with that of alkene sulfenylation. Alkyl group branching α to the double bond was shown to have the greatest effect on alkene reactivity and the stereochemical outcome of corresponding addition reactions. This is in sharp contrast with other additions to alkenes, which depend more on the degree of substitution on C=C or upon substituent electronic effects. Electronic and steric effects influencing asymmetric induction, stereochemistry, regiochemistry, and relative reactivities in the addition of PhSeOTf to alkenes are compared and contrasted with those of PhSCl.