RESUMO
The heteroatom substitution is considered as a promising strategy for boosting the redox kinetics of transition metal compounds in hybrid supercapacitors (HSCs) although the dissimilar metal identification and essential mechanism that dominate the kinetics remain unclear. It is presented that d-p orbital hybridization between the metal and electrolyte ions can be utilized as a descriptor for understanding the redox kinetics. Herein, a series of Co, Fe and Cu heteroatoms are respectively introduced into Ni3Se4 cathodes, among them, only the moderate Co-substituted Ni3Se4 can hold the optimal d-p orbital hybridization resulted from the formed more unoccupied antibonding states π*. It inevitably enhances the interfacial charge transfer and ensures the balanced OH- adsorption-desorption to accelerate the redox kinetics validated by the lowest reaction barrier (0.59â eV, matching well with the theoretical calculations). Coupling with the lower OH- diffusion energy barrier, the prepared cathode delivers ultrahigh rate capability (~68.7 % capacity retention even the current density increases by 200â times), and an assembled HSC also presents high energy/power density. This work establishes the principles for determining heteroatoms and deciphers the underlying effects of the heteroatom substitution on improving redox kinetics and the rate performance of battery-type electrodes from a novel perspective of orbital-scale manipulation.
RESUMO
Organic-inorganic heterostructures play a pivotal role in modern electronic and optoelectronic applications including photodetectors and field effect transistors, as well as in solar energy conversion such as photoelectrodes of dye-sensitized solar cells, photoelectrochemical cells, and in organic photovoltaics. To a large extent, performance of such devices is controlled by charge transfer dynamics at and across (inner) interfaces, e.g., between a wide band gap semiconductor and molecular sensitizers and/or catalysts. Hence, a detailed understanding of the structure-dynamics-function relationship of such functional interfaces is necessary to rationalize possible performance limitations of these materials and devices on a molecular level. Vibrational sum-frequency generation (VSFG) spectroscopy, as an interface-sensitive spectroscopic technique, allows to obtain chemically specific information from interfaces and combines such chemical insights with ultrafast time resolution, when integrated as a spectroscopic probe into a pump-probe scheme. Thus, this minireview discusses the advantages and potential of VSFG spectroscopy for investigating interfacial charge transfer dynamics and structural changes at inner interfaces. A critical perspective of the unique spectroscopic view of otherwise inaccessible interfaces is presented, which we hope opens new opportunities for an improved understanding of function-determining processes in complex materials, and brings together communities who are devoted to designing materials and devices with spectroscopists.
RESUMO
Conventional photovoltaic (PV)-photodetectors are hard to detect fainted signals, while photomultiplication (PM)-capable devices indispensable for detecting weak light and are prone to degrade under strong light illumination and large bias, and it is urgent to realize highly efficient integrated detecting system with both PM and PV operation modes. In this work, one lead-free Cs3Cu2I5 nanocrystals with self-trapping exciton nature was introduced as interfacial layer adjacent to bulk and layer-by-layer heterojunction structure, and corresponding organic photodetectors with bias-switchable dual modes are demonstrated. The fabricated device exhibits low operating bias (0â V for PV mode and 0.8â V for PM mode), high specific detectivity (~1013â Jones), fast response speed as low as 1.59â µs, large bandwidth over 0.2â MHz and long-term operational stability last for 4â months in ambient condition. This synergy strategy also validated in different materials and device architectures, providing a convenient and scalable production process to develop highly efficient bias-switchable multi-functional organic optoelectrical applications.
RESUMO
Coupling hollow semiconductor with metal-organic frameworks (MOFs) holds great promise for constructing high-efficient CO2 photoreduction systems. However, energy band mismatch between them makes it difficult to exert their advantages to maximize the overall photocatalytic efficiency, since that the blockage of desirable interfacial charge transfer gives rise to the enrichment of photoelectrons and CO2 molecules on the different locations. Herein, an interfacial engineering is presented to overcome this impediment, based on the insertion of plasmonic metal into the heterointerfaces between them, forming a stacked semiconductor/metal@MOF photocatalyst. Experimental observations and theoretical simulations validate the critical roles of embedded Au in maneuvering the charge separation/transfer and surface reaction: (i) bridges the photoelectron transfer from hollow CdS (H-CdS) to ZIF-8; (ii) produces hot electrons and shifts them to ZIF-8; (iii) induces the formation of ZIF-8 defects in promoting the CO2 adsorption/activation and transformation to CO with low energy barriers. Consequently, the as-prepared H-CdS/Au@ZIF-8 with optimal ZIF-8 thickness exhibits distinctly boosted activity and superb selectivity in CO production as compared with H-CdS@ZIF-8 and other counterparts. This work provides protocols to take full advantages of components involved for enhanced solar-to-chemical energy conversion efficiency of hybrid artificial photosynthetic systems through rationally harnessing the charge transfer between them.
RESUMO
Bio-electrochemical conversion of anthropogenic CO2 into value-added products using cost-effective metal-free catalysts represents a promising strategy for sustainable fuel production. Herein, N-doped carbon nanosheets synthesized via pyrolysis of the zeolitic-imidazolate framework (ZIF) are developed for constructing efficient biohybrids to facilitate CO2 -to-CH4 conversion. The microbial enrichment and bio-interfacial charge transfer are significantly affected by the proportion of the co-existed graphitic-N, pyridinic-N, and pyrrolic-N in the defective carbon nanosheets. It is unfolded that pyridinic-N and pyrrolic-N with the doped N atoms near the edge can significantly enhance the adsorption of their adjacent C atoms toward O, leading to improved microbe enrichment. Especially, pyridinic-N which can provide one p electron to the aromatic π system, greatly enhances the electron-donating capability of the carbon nanosheets to the microorganisms. Correspondingly, due to its largest amount of pyridinic-N doping, the N-doped carbon nanosheets derived from ZIF pyrolysis at 900 °C (denoted 900-NC) achieve the highest methane production of ≈215.7 mmol m-2 day-1 with a high selectivity (Faradaic efficiency = ≈94.2%) at -0.9 V versus Ag/AgCl. This work demonstrates the effectiveness of N-doped carbon catalysts for bio-electrochemical CO2 fixation and contributes to the understanding of N functionalities toward microbiome response and biotic-abiotic charge transfer in various bio-electrochemical systems.
RESUMO
The recent outbreak of Covid-19 guarantees overconsumption of different drugs as a necessity to reduce the symptoms caused by this pandemic. This triggers the proliferation of pharmaceuticals into drinking water systems. Is there any hope for access to safe drinking water? Photocatalytic degradation using artificial Z-scheme photocatalysts that has been employed for over a decade conveys a prospect for sustainable clean water supply. It is compelling to comprehensively summarise the state-of-the-art effects of Z-scheme photocatalytic systems towards the removal of pharmaceuticals in water. The principle of Z-scheme and the techniques used to validate the Z-scheme interfacial charge transfer are explored in detail. The application of the Z-scheme photocatalysts towards the degradation of antibiotics, NSAIDs, and bacterial/viral inactivation is deliberated. Conclusions and stimulating standpoints on the challenges of this emergent research direction are presented. The insights and up-to-date information will prompt the up-scaling of Z- scheme photocatalytic systems for commercialization.
RESUMO
Photogeneration of charge carriers in semiconductors provides the scientific fundamental for photocatalytic water splitting. However, an ongoing challenge is the development of a new mechanism promoting charge carrier separation. Here we propose a trap-state-induced interfacial charge-transfer transition mechanism (TSICTT), in which electrons in long-lived trap states recombine with holes on the valence band (VB) of the semiconductor, thus prolonging the electron lifetime. We demonstrate this concept in the Sr4Al14O25:Eu2+, Dy3+/CdS (SAO/CdS) heterostructure, where trapped electrons with a lifetime of up to several hours in the SAO persistent luminescence phosphor (PLP) can continuously consume holes on the VB of CdS nanoparticles (NPs). We discover that the interfacial interaction and the work function difference between SAO and CdS are crucial for the TSICTT, which finally contributes to the improved H2 production from 34.4 to 1212.9 µmol gCdS-1 h-1 under visible-light irradiation. This model introduces a new strategy to manipulate charge carrier transport for the effective utilization of solar energy.
RESUMO
Cooperative coupling of H2 evolution with oxidative organic synthesis is promising in avoiding the use of sacrificial agents and producing hydrogen energy with value-added chemicals simultaneously. Nonetheless, the photocatalytic activity is obstructed by sluggish electron-hole separation and limited redox potentials. Herein, Ni-doped Zn0.2 Cd0.8 S quantum dots are chosen after screening by DFT simulation to couple with TiO2 microspheres, forming a step-scheme heterojunction. The Ni-doped configuration tunes the highly active S site for augmented H2 evolution, and the interfacial Ni-O bonds provide fast channels at the atomic level to lower the energy barrier for charge transfer. Also, DFT calculations reveal an enhanced built-in electric field in the heterojunction for superior charge migration and separation. Kinetic analysis by femtosecond transient absorption spectra demonstrates that expedited charge migration with electrons first transfer to Ni2+ and then to S sites. Therefore, the designed catalyst delivers drastically elevated H2 yield (4.55â mmol g-1 h-1 ) and N-benzylidenebenzylamine production rate (3.35â mmol g-1 h-1 ). This work provides atomic-scale insights into the coordinated modulation of active sites and built-in electric fields in step-scheme heterojunction for ameliorative photocatalytic performance.
RESUMO
In photosynthesis, solar energy is harvested by photosensitizers, and then, the excited electrons transfer via a Z-Scheme mode to enzymatic catalytic centers to trigger redox reactions. Herein, we constructed a core-shell Z-scheme heterojunction of semiconductor@single-atom catalysts (SACs). The oxygen-vacancy-rich ZnO core and single-atom Co-N4 sites supported on nitrogen-rich carbon shell (SA-Co-CN) act as the photosensitizer and the enzyme-mimicking active centers, respectively. Driven by built-in electric field across the heterojunction, photoexcited electrons could rapidly (2â ps) transfer from the n-type ZnO core to the p-type SA-Co-CN shell, finally boosting the catalytic performance of the surface-exposed single-atom Co-N4 sites for peroxymonosulfate (PMS) activation under light irradiation. The synergies between photocatalysis and heterogeneous Fenton-like reaction lead to phenomenally enhanced production of various reactive oxygen species for rapid degradation of various microcontaminants in water. Experimental and theoretical results validate that the interfacial coupling of SA-Co-CN with ZnO greatly facilitates PMS adsorption and activation by reducing the adsorption energy and enhancing the cascade electron transfer processes for the photo-Fenton-like reaction.
RESUMO
We investigate [Formula: see text]/[Formula: see text] superlattices in which we observe a full electron transfer at the interface from Ir to Ni, triggering a massive structural and electronic reconstruction. Through experimental characterization and first-principles calculations, we determine that a large crystal field splitting from the distorted interfacial [Formula: see text] octahedra surprisingly dominates over the spin-orbit coupling and together with the Hund's coupling results in the high-spin (S = 1) configurations on both the Ir and Ni sites. This demonstrates the power of interfacial charge transfer in coupling lattice, charge, orbital, and spin degrees of freedom, opening fresh avenues of investigation of quantum states in oxide superlattices.
RESUMO
1D nanostructured photoelectrodes are promising for application as photoelectrochemical (PEC) devices for solar energy conversion into hydrogen (H2 ) owing to the optical, structural, and electronic advantages. Titanium dioxide (TiO2 ) is the most investigated candidate as a photoelectrode due to its good photostability, low production cost, and eco-friendliness. The obstacle for TiO2 's practical application is the inherent wide bandgap (UV-lights response), poor conductivity, and limited hole diffusion length. Here, a comprehensive review of the current research efforts toward the development of 1D TiO2 based photoelectrodes for heterogeneous PEC water splitting is provided along with a discussion of nanoarchitectures and energy band engineering influences on interfacial charge transfer and separation of 1D TiO2 composited with different dimensional photoactive materials. The key focus of this review is to understand the charge transfer processes at interfaces and the relationship between photogenerated charge separation and photoelectrochemical performance. It is anticipated that this review will afford enriched information on the rational designs of nanoarchitectures, doping, and heterojunction interfaces for 1D TiO2 based photoelectrodes to achieve highly efficient solar energy conversion.
RESUMO
SrSn(OH)6 (SSOH) possesses a high oxidation potential in the valence band (VB), which is suitable for photocatalytic oxidation removal of pollutants. However, the electrons in the VB of these catalysts are difficult to transition to the conduction band (CB) under visible light, which makes it difficult to utilize sunlight effectively. In this work, Ag/Ag2O is loaded on the surface of SSOH nanowires, which stimulates the interfacial charge-transfer transition on SSOH. Compared with pure-phase SSOH, the NO abatement ratio of Ag/Ag2O-SSOH under visible light irradiation is increased to 45.10%. The e- in the VB of Ag2O are excited into the CB under visible light, and are further transferred to the Ag to react with O2 to produce superoxide radicals. The photo-excited e- in the VB of SSOH enter into the VB of Ag2O through interfacial charge-transfer transition to recombine with the photo-generated holes in the VB of Ag2O, thereby leaving photo-generated holes in the VB of SSOH. The holes in the VB of SSOH have sufficient oxidizing ability to oxidize the adsorbed hydroxyl groups into hydroxyl radicals. This work provides a new perspective for photocatalytic removal of pollutants by wide band gap photocatalyst under visible light.
Assuntos
Nanofios , Catálise , Luz , Oxirredução , Luz SolarRESUMO
Hydroxyl/amino and Fe(III) co-grafted graphite carbon nitride (CN) is fabricated via alkaline hydrothermal treatment and followed by an impregnation adsorption process. In this unique fabrication, hydroxyl and amino groups enriched on the surface play a vital role in improving the adsorption capacity for volatile organic compounds (VOCs), while the grafted amorphous Fe(III) clusters could dominantly regulate the path of molecular oxygen activation via photo-Fenton reaction, and change the selectivity of intermediate reactive oxygen species (ROS) with the assistant of the rich surficial hydroxyl groups. Meanwhile, both the grafted functional groups and Fe(III) clusters can serve as photogenerated charge acceptors for collaboratively accelerating carriers' separation. Besides, the Fe(III)-mediated interfacial charge transfer effect (IFCT) also could extend visible light absorption and boost carriers' generation. Benefiting from the virtues of the complementary and synergy of the grafted hydroxyl/amino and Fe(III), the dual-functionalized CN is qualified as an efficient photocatalyst for removal of VOCs, which exhibits 22 and 18 times isopropanol (IPA) adsorption capacity and CO2 production than of pristine CN during photocatalytic IPA removal, respectively. Moreover, this work provides a new strategy of surficial group-cluster bifunctionalization for systematically improving sustainable solar-to-chemical energy conversion towards VOCs mineralization.
Assuntos
Grafite , Compostos Orgânicos Voláteis , Catálise , Compostos Férricos , NitrilasRESUMO
Atomic dispersion of dopants and control over their defect chemistry are central goals in the development of oxide nanoparticles for functional materials with dedicated electronic, optical or magnetic properties. We produced highly dispersed oxide nanocubes with atomic distribution of cobalt ions in substitutional sites of the MgO host lattice via metal organic chemical vapor synthesis. Vacuum annealing of the nanoparticle powders up to 1173â K has no effect on the shape of the individual particles and only leads to moderate particle coarsening. Such materials processing, however, gives rise to the electronic reduction of particle surfaces, which-upon O2 admission-stabilize anionic oxygen radicals that are accessible to UV/Vis diffuse reflectance and electron paramagnetic resonance (EPR) spectroscopy. Multi-reference quantum chemical calculations show that the optical bands observed mainly originate from transitions into 4 A2g (4 F), 4 T1g (4 P) states with a contribution of transitions into 2 T1g , 2 T2g (2 G) states through spin-orbit coupling and gain intensity through vibrational motion of the MgO lattice or the asymmetric ion field. Related nanostructures are a promising material system for single atomic site catalysis. At the same time, it represents an extremely valuable model system for the study of interfacial electron transfer processes that are key to nanoparticle chemistry and photochemistry at room temperature, and in heterogeneous catalysis.
RESUMO
We highlight the recent progress in ultrafast dynamic microscopy that combines ultrafast optical spectroscopy with microscopy approaches, focusing on the application transient absorption microscopy (TAM) to directly image energy and charge transport in solar energy harvesting and conversion systems. We discuss the principles, instrumentation, and resolutions of TAM. The simultaneous spatial, temporal, and excited-state-specific resolutions of TAM unraveled exciton and charge transport mechanisms that were previously obscured in conventional ultrafast spectroscopy measurements for systems such as organic solar cells, hybrid perovskite thin films, and molecular aggregates. We also discuss future directions to improve resolutions and to develop other ultrafast imaging contrasts beyond transient absorption.
RESUMO
Dual-band-gap systems are promising for solar water splitting due to their excellent light-harvesting capability and high charge-separation efficiency. However, a fundamental understanding of interfacial charge-transfer behavior in the dual-band-gap configuration is still incomplete. Taking CdS/reduced graphene oxide (CdS/RGO) nanoheterojunctions as a model solar water splitting system, we attempt here to highlight the interaction-dependent interfacial charge-transfer behavior based on both experimental observations and theoretical calculations. Experimental evidence points to charge transfer at the CdS-RGO interface playing a dominant role in the photocatalytic hydrogen production activity. By tuning the degree of reduction of RGO, the interfacial interaction, and, thereby, the charge transfer can be controlled at the CdS-RGO interface. This observation is supported by theoretical analysis, where we find that the interfacial charge transfer is a balance between the effective single-electron- and hole-transfer probability and the surface free electron and hole concentration, both of which are related to the surface potential and tailored by interfacial interaction. This mechanism is applicable to all systems for solar water splitting, providing a useful guidance for the design and study of heterointerfaces for high-efficiency energy conversion.
RESUMO
Cobalt oxides as efficient oxygen evolution reaction (OER) electrocatalysts have received much attention because of their rich reserves and cheap cost. There are two common cobalt oxides, Co3 O4 (spinel phase, stable but poor intrinsic activity) and CoO (rocksalt phase, active but easily be oxidatized). Constructing Co3 O4 /CoO heterophase can inherit both characteristic features of each component and form a heterophase interface facilitating charge transfer, which is believed to be an effective strategy in designing excellent electrocatalysts. Herein, an atomic arrangement engineering strategy is applied to improve electrocatalytic activity of Co3 O4 for the OER. With the presence of oxygen vacancies, cobalt atoms at tetrahedral sites in Co3 O4 can more easily diffuse into interstitial octahedral sites to form CoO phase structure as revealed by periodic density functional theory computations. The Co3 O4 /CoO spinel/rocksalt heterophase can be in situ fabricated at the atomic scale in plane. The overpotential to reach 10 mA cm-2 of Co3 O4 /CoO is 1.532 V, which is 92 mV smaller than that of Co3 O4 . Theoretical calculations confirm that the excellent electrochemical activity is corresponding to a decline in average p-state energy of adsorbed-O on the Co3 O4 /CoO heterophase interface. The reaction Gibbs energy barrier has been significantly decreased with the construction of the heterophase interface.
RESUMO
Semiconductor-based surface enhanced Raman scattering (SERS) has attracted great attention due to its excellent spectral reproducibility, high uniformity, and good anti-interference ability. However, its relatively low SERS sensitivity still hinders its further developments in both performance and applications. Since the SERS is a peculiar surface effect, investigating the facet-dependent SERS activity of semiconductor nanostructures is crucial to boost their SERS signals. Although the semiconductor facet-dependent SERS effect is predicted via numerical calculations, convincing experimental evidence is scarce due to complicated and undefined surface conditions. In this work, three facet-defined ({100}, {110}, and {111} facets) Cu2 O microcrystals (MCs) with clear surface atomic configuration are utilized to investigate the facet-dependent SERS effect. The results from the Kelvin probe force microscopy measurements on single Cu2 O polyhedron, demonstrate that the facet-dependent work function plays a crucial role in the interfacial charge transfer process. Comparing with the {110} and {111} facets, the {100} facet possesses the lowest electronic work function, which enables more efficient interfacial charge transfer. The simulation results further confirm that the {100}-facets can transfer the most electrons from Cu2 O MCs to molecules due to its lowest facet work function, resulting in the largest increment of the molecular polarization.
RESUMO
Highly efficient perovskite solar cells have been characterized by current-density/voltage measurements in the dark at varied scan rates. The results were compared to the solar cells without a hole-transporting layer to investigate the role of ultrathin hole-transporting layers in solar-cell function. The parameters of internal voltage, diode ideality factor, capacitive current, and capacitance were calculated from the current-density/voltage response of the cells in the dark. The results show that the absence of the hole-transporting layer can cause a large recombination current within the depletion region at the gold contact/perovskite interface, and thus affects the cell performance.
RESUMO
Elegant Z-scheme WO3/Au/In2S3 nanowire arrays were precisely constructed through a facile step-by-step route. Surface potential change on pristine or In2S3-Au coated WO3 single nanowire under dark and illumination detected through a Kelvin probe force microscopy (KPFM) technique indicates that the vectorial holes transfer of In2S3 â Au â WO3 should occur upon the excitation of both WO3 and In2S3. In such charge transfer processes, the embedded Au nanoparticles in the heterojunction systems act as a charge mediator for electrons in the conduction band of WO3 and holes in the valence band of In2S3. The strong charge carrier separation ability of this structure will finally enhance the oxidation ability of WO3 with high concertation of photogenerated holes and, further, leave the free electrons in the In2S3 with long surviving time. Therefore, the unique Z-scheme WO3/Au/In2S3 heterostructure shows great visible-light activity toward photocatalytic reduction of CO2 in the presence of water vapor into renewable hydrocarbon fuel (methane: CH4).