A feasible way to explore real blood vessels thermal responses to laser irradiation by combing optical clearing and the reflectance spectra measurements: animal experiment study.

Laser therapy has been widely used to treat port-wine stains (PWS) and other cutaneous vascular lesions via selective photothermolysis. Animal models are a valuable tool for investigating thermal responses beneath the skin. However, in previous animal experiments, such as the dorsal skin chamber model, one side of the skin was removed, resulting in the loss of mechanical support for the target blood vessel. In this study, the optical clearing technique was applied to the dorsal skin, allowing direct observation of real thermal responses within the tissue without removing the covering skin. The target blood vessels were irradiated with a pulsed 1064 nm Nd: YAG laser. The corresponding thermal responses were recorded using a CCD camera. Additionally, variations in skin reflectance spectra were measured before and after laser irradiation. Due to the optical clearing and reflectance spectra measurement, vessel responses such as contraction, reperfusion, and full occlusion were correlated with specific variation patterns in reflectance spectral signals.

Extensively Microtwinned Diamond with Nanolaminates of Lonsdaleite Formed by Flash Laser Heating of Glassy Carbon.

Diamond's unique properties on the nanoscale make it one of the most important materials for use in biosensors and quantum computing and for components that can withstand the harsh environments of space. We synthesize oriented, faceted diamond particles by flash laser heating of glassy carbon at 16 GPa and 2300 K. Detailed transmission electron microscopy shows them to consist of a mosaic of diamond nanocrystals frequently joined at twin boundaries forming microtwins. Striking 3-fold translational periodicity was observed in both imaging and diffraction. This periodicity was shown to originate from nanodimensional wedge-shaped overlapping regions of twinned diamond and not from a possible 9R polytype, which has also been reported in other group IVa elements and water ice. Extended bilayers of hexagonal layer stacking were observed, forming lonsdaleite nanolaminates. The particles exhibited optical fluorescence with a rapid quench time (<1 ns) attributed to their unique twinned microstructure.

Dynamics of femtosecond heated warm dense copper with time-resolved L3-edge XANES.

Combining experimental set up and ab initio molecular dynamics simulations, we were able to follow the time evolution of the X-ray absorption near edge spectrum (XANES) of a dense copper plasma. This provides a deep insight into femtosecond laser interaction with a metallic copper target. This paper presents a review of the experimental developments we made to reduce the X-ray probe duration, from approximately 10 ps to fs duration with table-top laser systems. Moreover, we present microscopic scale simulations, performed with Density Functional Theory, as well as macroscopic simulations considering the Two-Temperature Model. These tools allow us to get a complete picture of the evolution of the target at a microscopic level, from the heating process to the melting and expansion stages, with a clear view of the physics involved during these processes. This article is part of the theme issue 'Dynamic and transient processes in warm dense matter'.

P-V-T equation of state of boron carbide.

We report the P-V-T equation of state measurements of B4C to 50 GPa and approximately 2500 K in laser-heated diamond anvil cells. We obtain an ambient temperature, third-order Birch-Murnaghan fit to the P-V data that yields a bulk modulus K0 of 221(2) GPa and derivative, (dK/dP)0 of 3.3(1). These were used in fits with both a Mie-Grüneisen-Debye model and a temperature-dependent, Birch-Murnaghan equation of state that includes thermal pressure estimated by thermal expansion (α) and a temperature-dependent bulk modulus (dK0/dT). The ambient pressure thermal expansion coefficient (α0 + α1T), Grüneisen γ(V) = γ0(V/V0)q and volume-dependent Debye temperature, were used as input parameters for these fits and found to be sufficient to describe the data in the whole P-T range of this study. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 1)'.

Oxidation of Ceramic Materials Based on HfB2-SiC under the Influence of Supersonic CO2 Jets and Additional Laser Heating.

The features of oxidation of ultra-high-temperature ceramic material HfB2-30 vol.%SiC modified with 1 vol.% graphene as a result of supersonic flow of dissociated CO2 (generated with the use of high-frequency induction plasmatron), as well as under the influence of combined heating by high-speed CO2 jets and ytterbium laser radiation, were studied for the first time. It was found that the addition of laser radiation leads to local heating of the central region from ~1750 to ~2000-2200 °C; the observed temperature difference between the central region and the periphery of ~300-550 °C did not lead to cracking and destruction of the sample. Oxidized surfaces and cross sections of HfB2-SiC-CG ceramics with and without laser heating were investigated using X-ray phase analysis, Raman spectroscopy and scanning electron microscopy with local elemental analysis. During oxidation by supersonic flow of dissociated CO2, a multilayer near-surface region similar to that formed under the influence of high-speed dissociated air flows was formed. An increase in surface temperature with the addition of laser heating from 1750-1790 to 2000-2200 °C (short term, within 2 min) led to a two to threefold increase in the thickness of the degraded near-surface area of ceramics from 165 to 380 microns. The experimental results indicate promising applications of ceramic materials based on HfB2-SiC as part of high-speed flying vehicles in planetary atmospheres predominantly composed of CO2 (e.g., Venus and Mars).

Optical and thermal fields induced in the bone marrow by external laser irradiation.

In regenerative medicine, the problem of growing mesenchymal stem cells from the bone marrow often arises. In such cases is important that the number of initial cells was large enough and their proliferative activity was high. We believe that this problem can be solved by short-term heating of local areas of the bone marrow in vivo with laser radiation. In this regard, it is of interest to study the optical and temperature fields induced inside the tubular bone under external laser irradiation. In this work, we obtained experimental data on the spatial distribution of temperature in the bone marrow of the rat femur in vitro under external exposure to laser radiation with wavelengths of 970 and 1940 nm. Radiation delivery was carried out using an optical fiber which tip contacted the surface of the femur bone. A thin thermocouple was used to measure the temperature in a local area of the bone marrow. By moving the optical fiber tip discretely along the longitudinal axis of the bone, and the thermocouple in the perpendicular direction, the spatial temperature distributions in dynamics were measured. Similarly, the spatial distributions of the laser radiation intensity were measured by replacing thermocouple with optical fiber probe. A thermal camera was used to control the temperature of the bone surface near the tip of the fiber. It was shown that the marrow could be heated from the outside by about 5-10 °C during 10 s without significant overheating of the bone tissue. The data obtained make it possible to estimate the volume of the bone marrow heated by the laser to a predetermined temperature and to make a reasonable choice of laser exposure modes to stimulate the proliferative activity of bone marrow mesenchymal stem cells in vivo.

Thermochemical Analysis of Improvised Energetic Materials by Laser-Heating Calorimetry.

Thermochemical analysis of six improvised energetic materials was carried out using laser-heating calorimetry to demonstrate the feasibility of this methodology to provide distinctive thermal signatures and information on the material shelf life. The chemicals evaluated were erythritol tetranitrate, hexamethylene triperoxide diamine (HMTD), poor-man's C-4 (blend of potassium chlorate and petroleum jelly), R-salt (represented by 1,3,5-trinitroso-1,3,5-triazinane), triacetone triperoxide (TATP), and urea nitrate. The measurement technique records the temperature rise with time, from which one can estimate the material endothermic/exothermic behavior, energy release rate, and total specific energy release (heating value, enthalpy of explosion), as well as the sample mass rate of change. Measurements were carried out in an inert nitrogen environment at laser heating rates up to 60 K/s with steady-state temperatures reaching about 933 K. Sample initial mass was between 1.0 mg and 4.0 mg. Experiments were carried out with freshly prepared samples, as well as refrigerated samples and those stored at room (laboratory) temperature for three years. Results indicated that the samples reacted rapidly between 0.50 s and 0.75 s, being initiated near the material decomposition temperature. The total specific energy release, using two different thermal-analysis models, was calculated and compared to values available in the literature. One model represents sample reaction and decomposition within the spherical reactor volume, while the second represents reactions emanating from sample in a pan centrally positioned within the sphere; the former model was found to be the more appropriate approach for these faster-reacting energetic materials. The thermal signatures (temperature-time derivatives with temperature) were different for each chemical, a feature that may be important for energetic material identification. The initiation and peak reaction temperatures were found to decrease with increasing initial sample mass. Also, the shelf life for TATP and HMTD was found not to degrade under nonideal conditions after three years.

Novel Probe for Thermally Controlled Raman Spectroscopy Using Online IR Sensing and Emissivity Measurements.

Temperature rise during Raman spectroscopy can induce chemical alterations of the material under analysis and seriously affect its characterization. Thus, such photothermal side effects can represent a serious problem to be carefully controlled in order to safeguard the integrity of the material and its spectral features. In this work, an innovative probe for thermally controlled portable Raman spectroscopy (exc. 785 nm) equipped with infrared sensing lines was developed. It included an infrared source and two thermopile sensors, which allowed to perform real-time measurements of the local emissivity of the material surface under laser excitation. The emissivity, which is needed in order to monitor the temperature of the irradiated surface through infrared radiation measurements, represents the complementary component of the reflectance in the radiative energy balance. Thus, total reflectance, temperature measurements and Raman spectroscopy were integrated in the present probe. After independently assessing the reliability of the former in order to derive the emissivity of variety of materials, the probe was successfully applied on pigments, paint layers, and a painting on canvas. The results achieved evidence the significant exploitation potential of the novel tool.

Experimental and Numerical Validation of Whispering Gallery Resonators as Optical Temperature Sensors.

This study experimentally and numerically validates the commonly employed technique of laser-induced heating of a material in optical temperature sensing studies. Furthermore, the Er3+-doped glass microspheres studied in this work can be employed as remote optical temperature sensors. Laser-induced self-heating is a useful technique commonly employed in optical temperature sensing research when two temperature-dependent parameters can be correlated, such as in fluorescence intensity ratio vs. interferometric calibration, allowing straightforward sensor characterization. A frequent assumption in such experiments is that thermal homogeneity within the sensor volume, that is, a sound hypothesis when dealing with small volume to surface area ratio devices such as microresonators, but has never been validated. In order to address this issue, we performed a series of experiments and simulations on a microsphere supporting whispering gallery mode resonances, laser heating it at ambient pressure and medium vacuum while tracking the resonance wavelength shift and comparing it to the shift rate observed in a thermal bath. The simulations were done starting only from the material properties of the bulk glass to simulate the physical phenomena of laser heating and resonance of the microsphere glass. Despite the simplicity of the model, both measurements and simulations are in good agreement with a highly homogeneous temperature within the resonator, thus validating the laser heating technique.

Single-Bonded Cubic AsN from High-Pressure and High-Temperature Chemical Reactivity of Arsenic and Nitrogen.

Chemical reactivity between As and N2 , leading to the synthesis of crystalline arsenic nitride, is here reported under high pressure and high temperature conditions generated by laser heating in a diamond anvil cell. Single-crystal synchrotron X-ray diffraction at different pressures between 30 and 40 GPa provides evidence for the synthesis of a covalent compound of AsN stoichiometry, crystallizing in a cubic P21 3 space group, in which each of the two elements is single-bonded to three atoms of the other and hosts an electron lone pair, in a tetrahedral anisotropic coordination. The identification of characteristic structural motifs highlights the key role played by the directional repulsive interactions between non-bonding electron lone pairs in the formation of the AsN structure. Additional data indicate the existence of AsN at room temperature from 9.8 up to 50 GPa. Implications concern fundamental aspects of pnictogens chemistry and the synthesis of innovative advanced materials.

Laser heating system at the Extreme Conditions Beamline, P02.2, PETRA III.

A laser heating system for samples confined in diamond anvil cells paired with in situ X-ray diffraction measurements at the Extreme Conditions Beamline of PETRA III is presented. The system features two independent laser configurations (on-axis and off-axis of the X-ray path) allowing for a broad range of experiments using different designs of diamond anvil cells. The power of the continuous laser source can be modulated for use in various pulsed laser heating or flash heating applications. An example of such an application is illustrated here on the melting curve of iron at megabar pressures. The optical path of the spectroradiometry measurements is simulated with ray-tracing methods in order to assess the level of present aberrations in the system and the results are compared with other systems, that are using simpler lens optics. Based on the ray-tracing the choice of the first achromatic lens and other aspects for accurate temperature measurements are evaluated.

Switching between laser-induced thermophoresis and thermal convection of liquid suspension in a microgap with variable dimension.

Phoretic motion of particles along a temperature gradient formed in a fluid, known as thermophoresis, often takes place under the influence of bulk motion caused by thermal convection. In this paper, using a laser heating method, the significance of two competing effects, that is, thermophoresis and thermal convection, for the particle transport in a liquid phase confined in a microgap is investigated experimentally by changing the gap size as a control parameter. It is found that there is a threshold of the gap size, above which the particles tend to accumulate around the heated spot, forming a ring-like particle distribution. On the contrary, if the gap size is below the threshold, the particles are depleted from the heated spot. Switching between these accumulation and depletion modes is expected to develop novel manipulation techniques.

A portable on-axis laser-heating system for near-90° X-ray spectroscopy: application to ferropericlase and iron silicide.

A portable IR fiber laser-heating system, optimized for X-ray emission spectroscopy (XES) and nuclear inelastic scattering (NIS) spectroscopy with signal collection through the radial opening of diamond anvil cells near 90°with respect to the incident X-ray beam, is presented. The system offers double-sided on-axis heating by a single laser source and zero attenuation of incoming X-rays other than by the high-pressure environment. A description of the system, which has been tested for pressures above 100 GPa and temperatures up to 3000 K, is given. The XES spectra of laser-heated Mg0.67Fe0.33O demonstrate the potential to map the iron spin state in the pressure-temperature range of the Earth's lower mantle, and the NIS spectra of laser-heated FeSi give access to the sound velocity of this candidate of a phase inside the Earth's core. This portable system represents one of the few bridges across the gap between laser heating and high-resolution X-ray spectroscopies with signal collection near 90°.

Melting dynamics of ice in the mesoscopic regime.

How does a crystal melt? How long does it take for melt nuclei to grow? The melting mechanisms have been addressed by several theoretical and experimental works, covering a subnanosecond time window with sample sizes of tens of nanometers and thus suitable to determine the onset of the process but unable to unveil the following dynamics. On the other hand, macroscopic observations of phase transitions, with millisecond or longer time resolution, account for processes occurring at surfaces and time limited by thermal contact with the environment. Here, we fill the gap between these two extremes, investigating the melting of ice in the entire mesoscopic regime. A bulk ice I h or ice VI sample is homogeneously heated by a picosecond infrared pulse, which delivers all of the energy necessary for complete melting. The evolution of melt/ice interfaces thereafter is monitored by Mie scattering with nanosecond resolution, for all of the time needed for the sample to reequilibrate. The growth of the liquid domains, over distances of micrometers, takes hundreds of nanoseconds, a time orders of magnitude larger than expected from simple H-bond dynamics.

Probing disorder in high-pressure cubic tin (IV) oxide: a combined X-ray diffraction and absorption study.

The transparent conducting oxide, SnO2, is a promising optoelectronic material with predicted tailorable properties via pressure-mediated band gap opening. While such electronic properties are typically modeled assuming perfect crystallinity, disordering of the O sublattice under pressure is qualitatively known. Here a quantitative approach is thus employed, combining extended X-ray absorption fine-structure (EXAFS) spectroscopy with X-ray diffraction, to probe the extent of Sn-O bond anharmonicities in the high-pressure cubic (Pa\bar{3}) SnO2 - formed as a single phase and annealed by CO2 laser heating to 2648 ± 41 K at 44.5 GPa. This combinational study reveals and quantifies a large degree of disordering in the O sublattice, while the Sn lattice remains ordered. Moreover, this study describes implementation of direct laser heating of non-metallic samples by CO2 laser alongside EXAFS, and the high quality of data which may be achieved at high pressures in a diamond anvil cell when appropriate thermal annealing is applied.

Photothermoelectric Detection of Gold Oxide Nonthermal Decomposition.

A thin coating of gold oxide, metastable at room temperature, can be formed by placing gold in a strongly oxidizing environment such as an oxygen plasma. We report scanning photovoltage measurements of lithographically defined gold nanowires subsequent to oxygen plasma exposure. Photovoltages are detected during the first optical scan of the devices that are several times larger than those mapped on subsequent scans. The first-scan enhanced photovoltage correlates with a reduction of the electrical resistance of the nanostructure back to preoxygen-exposure levels. Repeating oxygen plasma exposure "reinitializes" the devices. These combined photovoltage and transport measurements imply that the enhanced photovoltage results from the photothermoelectric response of a junction between Au and oxidized Au, with an optically driven decomposition of the oxide. Comparisons with the known temperature-dependent kinetics of AuOx decomposition suggest that the light-driven decomposition is not a purely thermal effect. These experiments demonstrate that combined optical and electronic measurements can provide a window on surface-sensitive photochemical processes.

Reduction of the temperature gradients in laser assisted high temperature MAS NMR.

Laser assisted magic angle spinning (MAS) solid state NMR experiments enable studying physicochemical properties at very high temperatures with high resolution. Large temperature gradients however, can degrade resolution and precision of this technique. Due to the strong temperature dependence of the 207Pb chemical-shift in lead nitrate, a temperature difference along the sample leads to a broadening of the signal. A second moment analysis of the NMR spectra serves as an analytical method to quantify the temperature gradient. We show how an arbitrary line-shape can be decomposed into a set of Gaussian functions from which the 2nd moment is calculated in an analytical fashion which improves the numerical stability of the analysis. It was found that measuring the FID in a non-steady temperature state can reduce the temperature gradient inside the rotor, caused by the single-sided heating.

Exploring Photothermal Pathways via in Situ Laser Heating in the Transmission Electron Microscope: Recrystallization, Grain Growth, Phase Separation, and Dewetting in Ag0.5Ni0.5 Thin Films.

A new optical delivery system has been developed for the (scanning) transmission electron microscope. Here we describe the in situ and "rapid ex situ" photothermal heating modality of the system, which delivers >200 mW of optical power from a fiber-coupled laser diode to a 3.7 µm radius spot on the sample. Selected thermal pathways can be accessed via judicious choices of the laser power, pulse width, number of pulses, and radial position. The long optical working distance mitigates any charging artifacts and tremendous thermal stability is observed in both pulsed and continuous wave conditions, notably, no drift correction is applied in any experiment. To demonstrate the optical delivery system's capability, we explore the recrystallization, grain growth, phase separation, and solid state dewetting of a Ag0.5Ni0.5 film. Finally, we demonstrate that the structural and chemical aspects of the resulting dewetted films was assessed.

Molecular Hyperthermia: Spatiotemporal Protein Unfolding and Inactivation by Nanosecond Plasmonic Heating.

Spatiotemporal control of protein structure and activity in biological systems has important and broad implications in biomedical sciences as evidenced by recent advances in optogenetic approaches. Here, this study demonstrates that nanosecond pulsed laser heating of gold nanoparticles (GNP) leads to an ultrahigh and ultrashort temperature increase, coined as "molecular hyperthermia", which causes selective unfolding and inactivation of proteins adjacent to the GNP. Protein inactivation is highly dependent on both laser pulse energy and GNP size, and has a well-defined impact zone in the nanometer scale. It is anticipated that the fine control over protein structure and function enabled by this discovery will be highly enabling within a number of arenas, from probing the biophysics of protein folding/unfolding to the nanoscopic manipulation of biological systems via an optical trigger, to developing novel therapeutics for disease treatment without genetic modification.

Selective inactivation of enzymes conjugated to nanoparticles using tuned laser illumination.

We report a novel method for specific deactivation of conjugated enzymes using laser-heated gold nanoparticles. Current methods involve treatment of the entire solution, thereby inactivating all bioactive components. Our method enables inactivation of only a single or subset of targeted enzymes. The selected enzyme is pre-conjugated to gold nanoparticles, which are specifically heated by a laser tuned to their surface plasmon resonance. We demonstrate inactivation of a selected enzyme, glucose oxidase, within a mixture of biomolecules. Illumination of non-conjugated enzymes and nanoparticles demonstrated specificity. We propose a novel method to quantitatively regulate enzyme activity, providing a building block for cellular and cell-free biochemical reactions. © 2016 International Society for Advancement of Cytometry.