An In Situ TEM Study of the Influence of Water Vapor on Reduction of Nickel Phyllosilicate - Retarded Growth of Metal Nanoparticles at Higher Rates.

Unavoidable water formation during the reduction of solid catalyst precursors has long been known to influence the nanoparticle size and dispersion in the active catalyst. This in situ transmission electron microscopy study provides insight into the influence of water vapor at the nanoscale on the nucleation and growth of the nanoparticles (2-16 nm) during the reduction of a nickel phyllosilicate catalyst precursor under H2/Ar gas at 700 °C. Water suppresses and delays nucleation, but counterintuitively increases the rate of particle growth. After full reduction is achieved, water vapor significantly enhances Ostwald ripening which in turn increases the likelihood of particle coalescence. This study proposes that water leads to formation of mobile nickel hydroxide species, leading to faster rates of particle growth during and after reduction.

Modeling the Formation of Organic Compounds across Full Volatility Ranges and Their Contribution to Nanoparticle Growth in a Polluted Atmosphere.

Nanoparticle growth influences atmospheric particles' climatic effects, and it is largely driven by low-volatility organic vapors. However, the magnitude and mechanism of organics' contribution to nanoparticle growth in polluted environments remain unclear because current observations and models cannot capture organics across full volatility ranges or track their formation chemistry. Here, we develop a mechanistic model that characterizes the full volatility spectrum of organic vapors and their contributions to nanoparticle growth by coupling advanced organic oxidation modeling and kinetic gas-particle partitioning. The model is applied to Nanjing, a typical polluted city, and it effectively captures the volatility distribution of low-volatility organics (with saturation vapor concentrations <0.3 µg/m3), thus accurately reproducing growth rates (GRs), with a 4.91% normalized mean bias. Simulations indicate that as particles grow from 4 to 40 nm, the relative fractions of GRs attributable to organics increase from 59 to 86%, with the remaining contribution from H2SO4 and its clusters. Aromatics contribute much to condensable organic vapors (∼37%), especially low-volatility vapors (∼61%), thus contributing the most to GRs (32-46%) as 4-40 nm particles grow. Alkanes also contribute 19-35% of GRs, while biogenic volatile organic compounds contribute minimally (<13%). Our model helps assess the climatic impacts of particles and predict future changes.

Spike Growth on Patterned Gold Nanoparticle Scaffolds.

This work reports a scaffold-templated, bottom-up synthesis of 3D anisotropic nanofeatures on periodic arrays of gold nanoparticles (AuNPs). Our method relies on substrate-bound AuNPs as large seeds with hemispherical shapes and smooth surfaces after the thermal annealing of as-fabricated particles. Spiky features were grown by immersing the patterned AuNPs into a growth solution consisting of a gold salt and Good's buffer; the number and length of spikes could be tuned by changing the solution pH and buffer concentration. Intermediate structures that informed the growth mechanism were characterized as a function of time by correlating the optical properties and spike features. Large-area (cm2) spiky AuNP arrays exhibited surface-enhanced Raman spectroscopy enhancement that was associated with increased numbers of high-aspect-ratio spikes formed on the AuNP seeds.

Molecular Characterization of Oxygenated Organic Molecules and Their Dominating Roles in Particle Growth in Hong Kong.

Oxygenated organic molecules (OOMs) are critical intermediates linking volatile organic compound oxidation and secondary organic aerosol (SOA) formation. Yet, the understanding of OOM components, formation mechanism, and impacts are still limited, especially for urbanized regions with a cocktail of anthropogenic emissions. Herein, ambient measurements of OOMs were conducted at a regional background site in South China in 2018. The molecular characteristics of OOMs revealed dominant nitrogen-containing products, and the influences of different factors on OOM composition and oxidation state were elucidated. Positive matrix factorization analysis resolved the complex OOM species to factors featured with fingerprint species from different oxidation pathways. A new method was developed to identify the key functional groups of OOMs, which successfully classified the majority species into carbonyls (8%), hydroperoxides (7%), nitrates (17%), peroxyl nitrates (10%), dinitrates (13%), aromatic ring-retaining species (6%), and terpenes (7%). The volatility estimation of OOMs was improved based on their identified functional groups and was used to simulate the aerosol growth process contributed by the condensation of those low-volatile OOMs. The results demonstrate the predominant role of OOMs in contributing sub-100 nm particle growth and SOA formation and highlight the importance of dinitrates and anthropogenic products from multistep oxidation.

In Situ TEM Observation of the Atomic Transport Process during the Coalescence of Au Nanoparticles.

In practical applications, the coalescence of metal nanoparticles (NPs) is a major factor affecting their physical chemistry properties. Currently, due to a lack of understanding of the atomic-level mechanisms during the nucleation and growth stages of coalescence, the correlation between the different dynamic factors in the different stages of NP coalescence is unclear. In this study, we used advanced in situ characterization techniques to observe the formation of atomic material transport channels (Au chains) during the initiation of coalescence nucleation. We focused on the movement and migration states of Au atoms and discovered an atomic ordered arrangement growth mechanism that occurs after the completion of nucleation. Simultaneously, we used density functional theory to reveal the formation principle of Au chains. These findings improve our understanding of the atomic-scale coalescence process, which can provide a new perspective for further research on coalescence atomic dynamics.

Plasma with carbon nanoparticles: advances and application.

This article is devoted to the study of the glow intensity of radio-frequency capacitive discharge plasma with nanoparticles for further use in lighting devices. The process of carbon nanoparticles synthesis in the radiofrequency discharge was investigated, and the influence of plasma parameters on the formation and growth of the material was also studied. A method for determining the diameter of nanoparticles based on self-bias voltage and electron density is considered. It is revealed that the diameter of nanoparticles has a considerable influence on the optical properties of the plasma, in particular, on the emission intensity. Based on the obtained data, laboratory samples of lighting devices with improved luminous intensities were developed.

Rapid growth of organic aerosol nanoparticles over a wide tropospheric temperature range.

Nucleation and growth of aerosol particles from atmospheric vapors constitutes a major source of global cloud condensation nuclei (CCN). The fraction of newly formed particles that reaches CCN sizes is highly sensitive to particle growth rates, especially for particle sizes <10 nm, where coagulation losses to larger aerosol particles are greatest. Recent results show that some oxidation products from biogenic volatile organic compounds are major contributors to particle formation and initial growth. However, whether oxidized organics contribute to particle growth over the broad span of tropospheric temperatures remains an open question, and quantitative mass balance for organic growth has yet to be demonstrated at any temperature. Here, in experiments performed under atmospheric conditions in the Cosmics Leaving Outdoor Droplets (CLOUD) chamber at the European Organization for Nuclear Research (CERN), we show that rapid growth of organic particles occurs over the range from [Formula: see text]C to [Formula: see text]C. The lower extent of autoxidation at reduced temperatures is compensated by the decreased volatility of all oxidized molecules. This is confirmed by particle-phase composition measurements, showing enhanced uptake of relatively less oxygenated products at cold temperatures. We can reproduce the measured growth rates using an aerosol growth model based entirely on the experimentally measured gas-phase spectra of oxidized organic molecules obtained from two complementary mass spectrometers. We show that the growth rates are sensitive to particle curvature, explaining widespread atmospheric observations that particle growth rates increase in the single-digit-nanometer size range. Our results demonstrate that organic vapors can contribute to particle growth over a wide range of tropospheric temperatures from molecular cluster sizes onward.

Plasmonic ELISA based on DNA-directed gold nanoparticle growth for Cronobacter detection in powdered infant formula samples.

The traditional gold nanoparticle (AuNP) growth-based plasmonic ELISA (pELISA) strictly and directly controlled by reducing reagents can achieve high sensitivity, but it remains fragile toward the surrounding environment. This work developed a sandwich pELISA for Cronobacter detection in powdered infant formula samples by mediating AuNP growth through DNA. In this assay, DNA adsorbed on the surface of gold nanoseeds guided the anisotropic crystal growth with hydroxylamine as a reducing reagent, and the catalase-hydrogen peroxide (Cat-H2O2) system was introduced to bridge the DNA-directed AuNP growth and pELISA, as such DNA can be cleaved into fragments by the hydroxyl radical generated from oxidation of H2O2 through Fenton reagents. Under optimized conditions, the proposed pELISA can qualitatively detect Cronobacter species (Cronobacter muytjensii ATCC 51329) by the naked eye with a cut-off limit of 3 × 105 cfu/mL. This method also revealed a good linear range (3 × 102 to 3 × 107 cfu/mL) for quantitative detection of C. muytjensii ATCC 51329 with a limit of detection of 1.6 × 102 cfu/mL, which is approximately 162.5 times lower than that of horseradish peroxidase-based conventional ELISA (2.6 × 104 cfu/mL). By taking advantage of highly stable DNA-directed AuNP growth, the proposed method shows a good performance in powdered infant formula samples spiked with different concentrations of C. muytjensii ATCC 51329 with average recoveries ranging from 90.79 to 119.09% and coefficient of variation ranging from 4.24 to 9.55%. These values corresponded to an acceptable accuracy and precision for the proposed method. In brief, this work shows potential for screening other analytes in food safety, clinical diagnostics, and environmental monitoring.

Temperature Dependent Nanochemistry and Growth Kinetics Using Liquid Cell Transmission Electron Microscopy.

Liquid cell transmission electron microscopy has become a powerful and increasingly accessible technique for in situ studies of nanoscale processes in liquid and solution phase. Exploring reaction mechanisms in electrochemical or crystal growth processes requires precise control over experimental conditions, with temperature being one of the most critical factors. Here we carry out a series of crystal growth experiments and simulations at different temperatures in the well-studied system of Ag nanocrystal growth driven by the changes in redox environment caused by the electron beam. Liquid cell experiments show strong changes in both morphology and growth rate with temperature. We develop a kinetic model to predict the temperature-dependent solution composition, and we discuss how the combined effect of temperature-dependent chemistry, diffusion, and the balance between nucleation and growth rates affect the morphology. We discuss how this work may provide guidance in interpreting liquid cell TEM and potentially larger-scale synthesis experiments for systems controlled by temperature.

Direct Observation of Ni Nanoparticle Growth in Carbon-Supported Nickel under Carbon Dioxide Hydrogenation Atmosphere.

Understanding nanoparticle growth is crucial to increase the lifetime of supported metal catalysts. In this study, we employ in situ gas-phase transmission electron microscopy to visualize the movement and growth of ensembles of tens of nickel nanoparticles supported on carbon for CO2 hydrogenation at atmospheric pressure (H2:CO2 = 4:1) and relevant temperature (450 °C) in real time. We observe two modes of particle movement with an order of magnitude difference in velocity: fast, intermittent movement (vmax = 0.7 nm s-1) and slow, gradual movement (vaverage = 0.05 nm s-1). We visualize the two distinct particle growth mechanisms: diffusion and coalescence, and Ostwald ripening. The diffusion and coalescence mechanism dominates at small interparticle distances, whereas Ostwald ripening is driven by differences in particle size. Strikingly, we demonstrate an interplay between the two mechanisms, where first coalescence takes place, followed by fast Ostwald ripening due to the increased difference in particle size. Our direct visualization of the complex nanoparticle growth mechanisms highlights the relevance of studying nanoparticle growth in supported nanoparticle ensembles under reaction conditions and contributes to the fundamental understanding of the stability in supported metal catalysts.

Synchrotron X-ray-induced Synthesis of Copper Hydroxide Nitrate Nanoplates on Cu Thin Films in an Ambient Atmosphere.

Synchrotron X-rays are widely used for material characterizations. However, they can also ionize atoms and molecules to damage and manipulate probed materials. We report here an X-ray-induced growth of copper hydroxide nitrate, Cu2(OH)3NO3, on copper thin films in the ambient atmosphere without solvents and thermal treatment. In situ synchrotron X-ray diffraction measurements showed that the time-dependent growth process of theCu2(OH)3NO3 is accompanied by the consumption of Cu metal and can be described by a sigmoidal model. The growth rate was reduced after the initial fast growth period. Scanning electron microscopy (SEM) images show that the isolated islands of Cu2(OH)3NO3 nanoplates formed in the beginning, which grew together with new nanoplates formed under continued X-ray irradiation. The result demonstrated that high-flux synchrotron X-rays may provide an unconventional approach to synthesizing and manipulating materials, which will inspire future investigation both experimentally and theoretically.

The effect of secondary electrons on radiolysis as observed by in liquid TEM: The role of window material and electrical bias.

The effect of window material on electron beam induced phenomena in liquid phase electron microscopy (LPEM) is an interesting yet under-explored subject. We have studied the differences of electron beam induced gold nanoparticle (AuNP) growth subject to three encapsulation materials: Silicon Nitride (Si3N4), carbon and formvar. We find Si3N4 liquid cells (LCs) to result in significantly higher AuNP growth yield as compared to LCs employing the other two materials. In all cases, an electrical bias of the entire LC structures significantly affected particle growth. We demonstrate an inverse correlation of the AuNP growth rate with secondary electron (SE) emission from the windows. We attribute these differences at least in part to variations in SE emission dynamics, which is seen as a combination of material and bias dependent SE escape flux (SEEF) and SE return flux (SERF). Furthermore, our model predictions qualitatively match electrochemistry expectations.

Investigating Reaction Intermediates during the Seedless Growth of Gold Nanostars Using Electron Tomography.

Good's buffers can act both as nucleating and shape-directing agents during the synthesis of anisotropic gold nanostars (AuNS). Although different Good's buffers can produce AuNS shapes with branches that are oriented along specific crystallographic directions, the mechanism is not fully understood. This paper reports how an analysis of the intermediate structures during AuNS synthesis from HEPES, EPPS, and MOPS Good's buffers can provide insight into the formation of seedless AuNS. Electron tomography of AuNS structures quenched at early times (minutes) was used to characterize the morphology of the incipient seeds, and later times were used to construct the growth maps. Through this approach, we identified how the crystallinity and shape of the first structures synthesized with different Good's buffers determine the final AuNS morphologies.

In Situ Transmission Electron Microscopy Measurements of Ge Nanowire Synthesis with Liquid Metal Nanodroplets in Water.

The growth of Ge nanowires in water inside a liquid transmission electron microscope (TEM) holder has been demonstrated at room temperature. Each nanowire growth event was stimulated by the incident electron beam on otherwise unsupported liquid Ga or liquid In nanodroplets. A variety of conditions were explored, including liquid metal nanodroplet surface condition, liquid metal nanodroplet size and density, formal concentration of dissolved GeO2, and electron beam intensity. The cumulative observations from a series of videos recorded during growth events suggested the following points. First, the conditions necessary for initiating nanowire growth at uncontacted liquid metal nanodroplets in a liquid TEM cell indicate the process was governed by solvated electrons generated from secondary electrons scattered by the liquid metal nanodroplets. The attained current densities were comparable to those achieved in conventional electrochemical liquid-liquid-solid (ec-LLS) growths outside of a TEM. Second, the surface condition of the liquid metal nanodroplets was quite influential on whether nanowire growth occurred and surface diffusion of Ge adatoms contributed to the rate of crystallization. Third, the Ge nanowire growth rates were limited by the feed rate of Ge to the crystal growth front rather than the rate of crystallization at the liquid metal/solid Ge interface. Estimates of an electrochemical current for the reduction of dissolved GeO2 were nominally in line with currents used for Ge nanowire growth by ec-LLS outside of the TEM. Fourth, the Ge nanowire growths in the liquid TEM cell occurred far from thermodynamic equilibrium, with supersaturation values of 104 prior to nucleation. These collective points provide insight on how to further control and improve Ge nanowire morphology and crystallographic quality by the ec-LLS method.

Formation of gold nanoparticles in a free-standing ionic liquid triggered by heat and electron irradiation.

Ionic liquids (ILs) feature negligibly low vapor pressures and can thus be freely introduced into the high vacuum of a transmission electron microscope. With this extraordinary property, the ILs offer a powerful tool for in situ transmission electron microscopy (TEM) in window-free liquid media at very high resolution. In this work, we use the IL 1-butyl-3-methylimidazolium chloride in order to study nucleation and growth of gold nanoparticles (NPs) in free-standing liquid droplets by scanning TEM (STEM). The results confirm that the used IL allows for generating Au NPs in situ, triggered by electron irradiation and heat. Firstly, the isotropic growth of small, spherical Au NPs was initiated and monitored, whereas different growth mechanisms were observed, i.e. growth by monomer attachment, growth through particle coalescence and possible Ostwald ripening events. After the initial growth phase, a second, anisotropic growth process was induced by a moderate temperature increase and continued electron irradiation. As a result, larger, faceted crystals, such as tetrahedra, octahedra or decahedra, were formed. As all these polymorphs are terminated by {111}-facets, the IL might not only act as liquid medium but in addition as a surfactant which preferentially attaches on the {100}-facets.

Empowering Electroless Plating to Produce Silver Nanoparticle Films for DNA Biosensing Using Localized Surface Plasmon Resonance Spectroscopy.

To facilitate the implementation of biosensors based on the localized surface plasmon resonance (LSPR) of metal nanostructures, there is a great need for cost-efficient, flexible, and tunable methods for producing plasmonic coatings. Due to its simplicity and excellent conformity, electroless plating (EP) is well suited for this task. However, it is traditionally optimized to produce continuous metal films, which cannot be employed in LSPR sensors. Here, we outline the development of an EP strategy for depositing island-like silver nanoparticle (NP) films on glass with distinct LSPR bands. The fully wet-chemical process only employs standard chemicals and proceeds within minutes at room temperature. The key step for producing spread-out NP films is an accelerated ripening of the silver seed layer in diluted hydrochloric acid, which reduces the nucleation density during plating. The reaction kinetics and mechanisms are investigated with scanning (transmission) electron microscopy (SEM/STEM), X-ray photoelectron spectroscopy (XPS), and UV-vis spectroscopy, with the latter enabling a convenient live monitoring of the deposition, allowing its termination at a stage of desired optical properties. The sensing capabilities of chemically deposited NP films as LSPR transducers are exemplified in DNA biosensing. To this end, a sensing interface is prepared using layer-by-layer (LbL) buildup of polyelectrolytes (PE), followed by adsorption and covalent immobilization of ssDNA. The obtained LSPR transducers demonstrate robustness and selectivity in sensing experiments with binding complementary and unrelated DNA strands.

Direct Observation of Early Stages of Growth of Multilayered DNA-Templated Au-Pd-Au Core-Shell Nanoparticles in Liquid Phase.

We report here on direct observation of early stages of formation of multilayered bimetallic Au-Pd core-shell nanocubes and Au-Pd-Au core-shell nanostars in liquid phase using low-dose in situ scanning transmission electron microscopy (S/TEM) with the continuous flow fluid cell. The reduction of Pd and formation of Au-Pd core-shell is achieved through the flow of the reducing agent. Initial rapid growth of Pd on Au along <111> direction is followed by a slower rearrangement of Pd shell. We propose the mechanism for the DNA-directed shape transformation of Au-Pd core-shell nanocubes to adopt a nanostar-like morphology in the presence of T30 DNA and discuss the observed nanoparticle motion in the confined volume of the fluid cell. The growth of Au shell over Au-Pd nanocube is initiated at the vertices of the nanocubes, leading to the preferential growth of the {111} facets and resulting in formation of nanostar-like particles. While the core-shell nanostructures formed in a fluid cell in situ under the low-dose imaging conditions closely resemble those obtained in solution syntheses, the reaction kinetics in the fluid cell is affected by the radiolysis of liquid reagents induced by the electron beam, altering the rate-determining reaction steps. We discuss details of the growth processes and propose the reaction mechanism in liquid phase in situ.

Kinetics and growth mechanism of the photoinduced synthesis of silver nanoparticles stabilized with lysozyme.

A fast and single-step procedure is reported for the preparation of stable solutions of spherical-shaped silver nanoparticles (AgNPs) coated with lysozyme (LZ). The preparation of the AgNP@LZ nanocomposites was based on the reduction of Ag+ with ketyl radicals photo-generated by the UVA-photolysis of the benzoin I-2959. Both reaction precursors bind to LZ, modifying its superficial charge and conformational structure. The photo-induced kinetics of formation of the AgNPs as a function of the LZ concentration was monitored in-situ by UV-vis absorption spectroscopy. The multivariate curve resolution-alternating least square (MCR-ALS) method was used for the deconvolution of the kinetic curves for each transient species formed before the growth of the final AgNPs colloids. The Kolmogorov-Johnson-Mehl-Avrami (KJMA) model to describe the formation of the AgNPs was used, and the respective first-order rate constants for the growth of the AgNPs as a function of the lysozyme concentration were calculated and the role of the protein capping in the growth kinetics was evaluated. Despite the protein being partially oxidized by the photo-generated radicals, it was strongly adsorbed onto the silver surface forming a tight coating shell around the AgNPs of approximately 30-60 protein molecules. As a result of the partial denaturation and crowded packing, its intrinsic lytic activity was strongly reduced.

Controlling the Amorphous and Crystalline State of Multinary Alloy Nanoparticles in An Ionic Liquid.

Controlling the amorphous or crystalline state of multinary Cr-Mn-Fe-Co-Ni alloy nanoparticles with sizes in the range between ~1.7 nm and ~4.8 nm is achieved using three processing routes. Direct current sputtering from an alloy target in the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide leads to amorphous nanoparticles as observed by high-resolution transmission electron microscopy. Crystalline nanoparticles can be achieved in situ in a transmission electron microscope by exposure to an electron beam, ex situ by heating in vacuum, or directly during synthesis by using a high-power impulse magnetron sputtering process. Growth of the nanoparticles with respect to the amorphous particles was observed. Furthermore, the crystal structure can be manipulated by the processing conditions. For example, a body-centered cubic structure is formed during in situ electron beam crystallization while longer ex situ annealing induces a face-centered cubic structure.

Poly(vinyl alcohol) capped silver nanoparticles for antioxidant assay based on seed-mediated nanoparticle growth.

A simple and rapid method for measurement of total antioxidant capacity (TAC) was developed. In this work, gallic acid was used as the antioxidant standard. Poly(vinyl alcohol) embedded silver nanoparticles (PVA-AgNPs) were employed as a colorimetric sensor. The detection principle was based on the seed-mediated nanoparticle growth technique. The PVA-AgNPs act as a catalyst in the reduction of Ag+ by gallic acid by providing nucleation seeds. Ag+ was reduced to Ag° and accumulated on the PVA-AgNP surface, leading to an increase in the size of particles. The absorbance of the colloidal solution was drastically enhanced with a small red shift. Under optimal conditions, a linear response was established between the change in absorbance and the TAC value expressed in terms of gallic acid equivalents. The linear range was from 25 to 200µM with a detection limit of 22.1µM. Satisfactory precision was obtained with % relative standard deviation (RSD) of 2.17. The developed sensor was successfully applied for TAC assessment of commercial ginger products. The PVA-AgNP sensor offers rapid analysis (within 5min) compared to other nanoparticle-based antioxidant assays. Synthesis of the particles and assay involved less-toxic chemicals, and is therefore a "greener" method.