Dual-Slope Path Loss Model for Integrating Vehicular Sensing Applications in Urban and Suburban Environments.

The development of intelligent transportation systems (ITS), vehicular ad hoc networks (VANETs), and autonomous driving (AD) has progressed rapidly in recent years, driven by artificial intelligence (AI), the internet of things (IoT), and their integration with dedicated short-range communications (DSRC) systems and fifth-generation (5G) networks. This has led to improved mobility conditions in different road propagation environments: urban, suburban, rural, and highway. The use of these communication technologies has enabled drivers and pedestrians to be more aware of the need to improve their behavior and decision making in adverse traffic conditions by sharing information from cameras, radars, and sensors widely deployed in vehicles and road infrastructure. However, wireless data transmission in VANETs is affected by the specific conditions of the propagation environment, weather, terrain, traffic density, and frequency bands used. In this paper, we characterize the path loss based on the extensive measurement campaign carrier out in vehicular environments at 700 MHz and 5.9 GHz under realistic road traffic conditions. From a linear dual-slope path loss propagation model, the results of the path loss exponents and the standard deviations of the shadowing are reported. This study focused on three different environments, i.e., urban with high traffic density (U-HD), urban with moderate/low traffic density (U-LD), and suburban (SU). The results presented here can be easily incorporated into VANET simulators to develop, evaluate, and validate new protocols and system architecture configurations under more realistic propagation conditions.

Path Loss Characterization in an Outdoor Corridor Environment for IoT-5G in a Smart Campus University at 850 MHz and 3.5 GHz Frequency Bands.

The usage scenarios defined in the ITU-M2150-1 recommendation for IMT-2020 systems, including enhanced Mobile Broadband (eMBB), Ultra-reliable Low-latency Communication (URLLC), and massive Machine Type Communication (mMTC), allow the possibility of accessing different services through the set of Radio Interface Technologies (RITs), Long-term Evolution (LTE), and New Radio (NR), which are components of RIT. The potential of the low and medium frequency bands allocated by the Federal Communications Commission (FCC) for the fifth generation of mobile communications (5G) is described. In addition, in the Internet of Things (IoT) applications that will be covered by the case of use of the mMTC are framed. In this sense, a propagation channel measurement campaign was carried out at 850 MHz and 5.9 GHz in a covered corridor environment, located in an open space within the facilities of the Pedagogical and Technological University of Colombia campus. The measurements were carried out in the time domain using a channel sounder based on a Universal Software Radio Peripheral (USRP) to obtain the received signal power levels over a range of separation distances between the transmitter and receiver from 2.00 m to 67.5 m. Then, a link budget was proposed to describe the path loss behavior as a function of these distances to obtain the parameters for the close-in free space reference distance (CI) and the floating intercept (FI) path loss prediction models. These parameters were estimated from the measurements made using the Minimum Mean Square Error (MMSE) approach. The estimated path loss exponent (PLE) values for both the CI and FI path loss models at 850 MHz and 3.5 GHz are in the range of 2.21 to 2.41, respectively. This shows that the multipath effect causes a lack of constructive interference to the received power signal for this type of outdoor corridor scenario. These results can be used in simulation tools to evaluate the path loss behavior and optimize the deployment of device and sensor network infrastructure to enable 5G-IoT connectivity in smart university campus scenarios.

Path Loss Measurements and Model Analysis in an Indoor Corridor Environment at 28 GHz and 38 GHz.

This paper examines the large-scale path loss models for an indoor corridor environment at frequencies of 28 and 38 GHz. The measurement environment consists of an indoor corridor with both line-of-sight (LOS) and non-line of sight (NLOS) scenarios using vertical-vertical (V-V) and vertical-horizontal (V-H) antenna polarizations. The single-frequency close-in (CI), floating intercept (FI), free space large-scale path loss models and measured data from the measurement campaign were used to evaluate the performance analysis. The paper also focuses on various parameters, such as standard deviation, path loss exponent (PLE), accuracy, simplicity, and stability of the models. The analysis focuses on the peculiarity of the effect of the wall proximity on the path loss parameters as well as comparisons with the parameters in some of the reviewed literature studies. The FI and CI models produce comparable results for both antenna polarizations and clearly fit with the measured path loss. The PLE, with the highest value of 3.33 at 38 GHz (V-H), is much higher in the NLOS scenario with V-H polarization due to the signal degradation along the path from the transmitter (Tx) to the receiver (Rx). This is because there is no direct LOS between the Tx and Rx antennas. The Rx only relies on signal diffractions and reflections from obstacles as it transmits through the path from the Tx antenna. The path loss measurements and model analysis presented here are useful in designing 5G wireless communication systems for indoor environments, particularly for power budget calculations.