Toward Conductive Additive Free Organic Electrode for Lithium-Ion Battery Using Supramolecular Columnar Organization.

With the aim to meet the greatest challenge facing organic batteries, namely the low conductivity of the electrodes, the electrochemical properties of a series of substituted perylene diimides able to form semi-conductive columnar material are investigated. Depending on the substituent group, a strong influence of this group on the reversibility, redox potential but especially on the gravimetric capacity of the electrodes is observed. In the case of substitution by a simple propyl group, the corresponding diimide shows a complete electrochemical activity with only 10% by mass of conductive additive and even shows a half-capacity activity without any additive and without particular electrode engineering. Extensive research has highlighted the intrinsic reactivity of the columnar material but also its perpetual rearrangement during charge/discharge cycles. This study shows that the amount of conductive additive can be significantly reduced by adapting the design of the molecular material and favoring the assembly of redox units in the form of a conductive column.

Enhancing Pollutant Mineralization through Organic-Inorganic Defect-Transit Dual S-scheme with a Robust Internal Electric Field.

Achieving superior photomineralization of pollutants relies on a rational design of a dual S-scheme with a robust internal electric field (IEF). In this study, to tackle the low mineralization rate in type-II In2 O3 /In2 S3 (IO/IS) systems, an organic-inorganic dual S-scheme In2 O3 /PDI/In2 S3 (IO/PDI/IS) nanostructured photocatalyst is synthesized via a method combining solvent-induced self-assembly and electrostatic forces. Due to the unique energy band position and strong IEF, the photoinduced defect-transit dual S-scheme IO/PDI/IS facilitates the degradation of lignin and antibiotics. Notably, a promising mineralization rate of 80.9% for sodium lignosulfonate (SL) is achieved. The charge transport pathway of IO/PDI/IS are further validated through the analysis of in situ X-ray photoelectron spectroscopy (in situ XPS), density functional theory calculations, and radical trapping experiments. In-depth, two possible pathways for the photocatalytic degradation of lignin are proposed based on the intermediates monitored by liquid chromatography-mass spectrometry (LC-MS). This study presents a new strategy for the design of organic-inorganic dual S-scheme photocatalysts with a robust IEF for pollutant degradation.

"One-Stone-Three-Birds" H2S-Photothermal Therapy for Enhanced Thrombolysis and Vascular Healing.

Thrombus causes a serious condition characterized by the formation of blood clots in blood vessels or heart, potentially leading to life-threatening emergencies. Photothermal therapy (PTT) serves as a treatment for thrombosis that provides noninvasive thrombus dissolution and fewer bleeding side effects. However, the high temperatures generated by PTT can exacerbate vascular inflammation and promote thrombus recurrence. In this study, a photothermal hydrogen sulfide (H2S) nanogenerator (PSA@ADT-OH) is constructed using a perylene-cored photothermal agent (PSA) coassembled with a H2S donor ADT-OH. The system PSA@ADT-OH demonstrates outstanding targeting and accumulation efficiency against blood flow shear forces. It also provides sustained H2S release at thrombus sites, contributing to antiplatelet aggregation, reactive oxygen species clearance, and vascular healing. This approach opens up new possibilities for advanced thrombus treatment.

Combined Covalent and Supramolecular Polymerization to Reinforce Perylenebisimide Photosynthetic "Quantasomes".

PSII-inspired quantasomes have emerged as promising artificial photosystems evolving oxygen from water due to their integrated multi-chromophore asset, hierarchical architecture, and efficient light-harvesting capabilities. In this study, we adopt a combined covalent and supramolecular strategy by implementing a poly-styrene backbone that reinforces proximity and pairing between adjacent perylenebisimide (PBI) quantasome units. The covalent fixation of the quantasome network results in a significant enhancement of the photoelectrocatalytic performance on engineered IO-ITO photoanodes, with up to 290 % photocurrent increase (J up to 100 µA cm-2, λ >450 nm, applied bias <1.23 V vs RHE, F.E.O2 >80 %) compared to the non-polymerized analog. Moreover, the direct PBI-quantasome polymerization on the photoanode surface was performed by light irradiation of the radical initiator 2,2'-Azobis(2-methylpropionamidine), improving the photoelectrode robustness under high solar irradiance (>8 suns) and limiting the photocurrent loss (<20 %) at 1.52 V vs RHE compared to the non-polymerized system.

Synthesis and dark state EPR properties of PDI-trityl dyads and triads.

Covalently-linked chromophore-radical systems with their unique optical and magnetic properties are useful for applications in, e. g., quantum information science. To expand the catalog of molecular systems, we synthesized and characterized six novel chromophore-radical and radical-chromophore-radical systems employing derivatives of perylene diimide (PDI) as the chromophore and trityl as the radical. The EPR properties of these compounds were evaluated in solution at cryogenic and room temperatures. In addition, the electron spin-spin coupling in the two bistrityl systems was investigated using DQC measurements. The presented results serve as a basis for further spectroscopic investigations under photoexcitation of the PDI core.

Extremely Stable Perylene Bisimide-Bridged Regioisomeric Diradicals and Their Redox Properties.

Excellent stability is an essential premise for organic diradicals to be used in organic electronic and spintronic devices. We have attached two tris(2,4,6-trichlorophenyl)methyl (TTM) radical building blocks to the two sides of perylene bisimide (PBI) bridges and obtained two regioisomeric diradicals (1,6-TTM-PBI and 1,7-TTM-PBI). Both of the isomers show super stability rather than the monomeric TTM under ambient conditions, due to the increased conjugation and the electron-withdrawing effects of the PBI bridges. The diradicals show distinct and reversible multistep redox processes, and a spectro-electrochemistry investigation revealed the generation of organic mixed-valence (MV) species during reduction processes. The two diradicals have singlet ground states, very small singlet-triplet energy gaps (ΔES-T ) and a pure open-shell character (with diradical character y0 =0.966 for 1,6-TTM-PBI and 0.967 for 1,7-TTM-PBI). This work opens a window to developing very stable diradicals and offers the opportunity of their further application in optical, electronic and magnetic devices.

Ring Fusion Elevates the Electronic Mobility of Azabenzannulated Perylene Diimide.

The backwardness of n-type organic semiconductors still exists compared with the p-type counterparts. Thus, the development of high-performance n-type organic semiconductors is of great importance for organic electronic devices and their integrated circuits. In recent years, azabenzannulated perylene diimide (PDI), as one of immense bay-region-annulated PDI derivatives, has drawn considerable attentions. However, the electronic mobilities of azabenzannulated PDI derivatives are barely satisfactory. In this contribution, the peripheral benzene ring in azabenzannulated PDI 2 was fused to the ortho position by intramolecular C-H arylation cyclization. This endows the resultant azabenzannulated PDI 4 a planar configuration as well as electron deficient pentagonal ring. As a result, the electronic mobility of 4 is almost two orders of magnitude higher than that of the nonfused azabenzannulated PDI 2. This work shall pave a new avenue in elevating the performance of azabenzannulated PDI in organic electronics.

Increased solar-driven chemical transformations through surface-induced benzoperylene aggregation in dye-sensitized photoanodes.

The impact of benzo[ghi]perylenetriimide (BPTI) dye aggregation on the performance of photoelectrochemical devices was explored, through imide-substitution with either alkyl (BPTI-A, 2-ethylpropyl) or bulky aryl (BPTI-B, 2,6-diisopropylphenyl) moieties, to, respectively, enable or suppress aggregation. While both dyes demonstrated similar monomeric optoelectronic properties in solution, adsorption onto mesoporous SnO2 revealed different behavior, with BPTI-A forming aggregates via π-stacking and BPTI-B demonstrating reduced aggregation in the solid state. BPTI photoanodes were tested in dye-sensitized solar cells (DSSCs) before application to dye-sensitized photoelectrochemical cells (DSPECs) for Br2 production (a strong oxidant) coupled to H2 generation (a solar fuel). BPTI-A demonstrated a twofold higher dye loading of the SnO2 surface than BPTI-B, resulting in a fivefold enhancement to both photocurrent and Br2 production. The enhanced output of the photoelectrochemical systems (with respect to dye loading) was attributed to both J- and H- aggregation phenomena in BPTI-A photoanodes that lead to improved light harvesting. Our investigation provides a strategy to exploit self-assembly via aggregation to improve molecular light-harvesting and charge separation properties that can be directly applied to dye-sensitized photoelectrochemical devices.

Bimolecular photoinduced symmetry-breaking charge separation of perylene in solution.

Photoinduced symmetry-breaking charge separation (SB-CS) results in the generation of charge carriers through electron transfer between two identical molecules, after photoexcitation of one of them. It is usually studied in systems where the two reacting moieties are covalently linked. Examples of photoinduced bimolecular SB-CS with organic molecules yielding free ions remain scarce due to solubility or aggregation issues at the high concentrations needed to study this diffusion-assisted process. Here we investigate the excited-state dynamics of perylene (Pe) at high concentrations in solvents of varying polarity. Transient absorption spectroscopy on the subnanosecond to microsecond timescales reveal that self-quenching of Pe in the lowest singlet excited state leads to excimer formation in all solvents used. Additionally, bimolecular SB-CS, resulting in the generation of free ions, occurs concurrently to excimer formation in polar media, with a relative efficiency that increases with the polarity of the solvent. Moreover, we show that SB-CS is most efficient in room-temperature ionic liquids due to a charge-shielding effect leading to a larger escape of ions and due to the high viscosity that disfavours excimer formation.

Selective and Sensitive Detection of Fe3+ Ions Using a Red-Emissive Fluorescent Probe Based on Triphenylamine and Perylene-Linked Conjugated Microporous Polymer.

The Expansion of modern industry underscores the urgent need to address heavy metal pollution, which is a threat to human-health and environment. Efforts are underwent to develop precise technologies for detecting heavy metal ions (M+-ion). One promising approach involves the use of Conjugated Microporous Polymers (CMPs) modified with Triphenylamine (TPA) anderylene (Peryl), known as TPA-Peryl-CMP, which emits strong refluorescence. Various analytical techniques, such as Brunauer-Emmett-Teller analysis, Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and thermogravimetric analysis (TGA), are utilized to characterize the synthesized TPA-Peryl-CMP and understand its functional properties. In addition to its remarkable fluorescence behavior, TPA-Peryl-CMP shows promise as a sensor for Fe3+ ions using a turn-off strategy. Due to its exceptional stability and robust π-electron system, this platform demonstrates remarkable sensitivity and selectivity, significantly improving detection capabilities for specific analytes. Detailed procedures related to the mechanism for detecting Fe3+ ions are outlined for sensing Fe3+ ions, revealing a notably strong linear correlation within the concentration range of 0-3 µM, with a correlation coefficient of 0.9936 and the Limit of detection (LOD) 20 nM. It is anticipated that development of such a kind of TPA-Peryl-CMP will observe broader applications in detecting various analytes related to environmental and biological systems.

Semi-Transparent Luminescent Solar Concentrators Based on Intramolecular Energy Transfer in Polyurethane Matrices.

Luminescent solar concentrators (LSCs) are spectral conversion devices offering interesting opportunities for the integration of photovoltaics into the built environment and portable systems. The Förster-resonance energy transfer (FRET) process can boost the optical response of LSCs by reducing energy losses typically associated to non-radiative processes occurring within the device under operation. In this work, a new class of FRET-based thin-film LSC devices is presented, in which the synthetic versatility of linear polyurethanes (PU) is exploited to control the photophysical properties and the device performance of the resulting LSCs. A series of luminescent linear PUs are synthesized in the presence of two novel bis-hydroxyl-functionalized luminophores of suitable optical properties, used as chain extenders during the step-growth polyaddition reaction for the formation of the linear macromolecular network. By synthetically tuning their composition, the obtained luminescent PUs can achieve a high energy transfer efficiency (≈90%) between the covalently linked luminophores. The corresponding LSC devices exhibit excellent photonic response, with external and internal photon efficiencies as high as ≈4% and ≈37%, respectively. Furthermore, their optimized power conversion efficiency combined with their enhanced average visible-light transmittance highlight their suitability for potential use as transparent solar energy devices.

Role of intramolecular hydrogen bonds in promoting electron flow through amino acid and oligopeptide conjugates.

Elucidating the factors that control charge transfer rates in relatively flexible conjugates is of importance for understanding energy flows in biology as well as assisting the design and construction of electronic devices. Here, we report ultrafast electron transfer (ET) and hole transfer (HT) between a corrole (Cor) donor linked to a perylene-diimide (PDI) acceptor by a tetrameric alanine (Ala)4 Selective photoexcitation of the donor and acceptor triggers subpicosecond and picosecond ET and HT. Replacement of the (Ala)4 linker with either a single alanine or phenylalanine does not substantially affect the ET and HT kinetics. We infer that electronic coupling in these reactions is not mediated by tetrapeptide backbone nor by direct donor-acceptor interactions. Employing a combination of NMR, circular dichroism, and computational studies, we show that intramolecular hydrogen bonding brings the donor and the acceptor into proximity in a "scorpion-shaped" molecular architecture, thereby accounting for the unusually high ET and HT rates. Photoinduced charge transfer relies on a (Cor)NH…O=C-NH…O=C(PDI) electronic-coupling pathway involving two pivotal hydrogen bonds and a central amide group as a mediator. Our work provides guidelines for construction of effective donor-acceptor assemblies linked by long flexible bridges as well as insights into structural motifs for mediating ET and HT in proteins.

Development of a sensitive electrochemical method to determine amitraz based on perylene tetracarboxylic acid/mesoporous carbon/Nafion@SPCEs.

A cutting-edge electrochemical method is presented for precise quantification of amitraz (AMZ), a commonly used acaricide in veterinary medicine and agriculture. Leveraging a lab-made screen-printed carbon electrode modified with a synergistic blend of perylene tetracarboxylic acid (PTCA), mesoporous carbon (MC), and Nafion, the sensor's sensitivity was significantly improved. Fine-tuning of PTCA, MC, and Nafion ratios, alongside optimization of the pH of the supporting electrolyte and accumulation time, resulted in remarkable sensitivity enhancements. The sensor exhibited a linear response within the concentration range 0.01 to 0.70 µg mL-1, boasting an exceptionally low limit of detection of 0.002 µg mL-1 and a limit of quantification of 0.10 µg mL-1, surpassing maximum residue levels permitted in honey, tomato, and longan samples. Validation with real samples demonstrated high recoveries ranging from 80.8 to 104.8%, with a relative standard deviation below 10%, affirming the method's robustness and precision. The modified PTCA/MC/Nafion@SPCE-based electrochemical sensor not only offers superior sensitivity but also simplicity and cost-effectiveness, making it a pivotal tool for accurate AMZ detection in food samples. Furthermore, beyond the scope of this study, the sensor presents promising prospects for wider application across various electrochemical analytical fields, thereby significantly contributing to food safety and advancing agricultural practices.

Single-Photon Emission from Organic Dye Molecules Adsorbed on a Quantum Dot via Energy Transfer.

Single-photon emissions from individual emitters are crucial in fundamental science and quantum information technologies. Multichromophoric systems, comprising multiple dyes, can exhibit single-photon emissions through efficient annihilation between the excited states; however, exploring this phenomenon in complex systems remains a challenge. In this study, we investigated the photon statistics of emissions from multiple perylene bisimide (PBI) dyes adsorbed onto the surface of CdSe/ZnS quantum dots (QDs). When multiple PBIs were simultaneously excited by both direct excitation and energy transfer from the QD, multiphoton emissions from the PBIs were observed. Conversely, when the QDs were selectively excited, multiple PBIs exhibiting single-photon emission through energy transfer from the QDs to the PBIs were found. These results highlight the intriguing interplay between multichromophoric systems and QDs, offering valuable insights into the development of efficient single-photon sources in quantum information technologies.

Using Hybrid PDI-Fe3O4 Nanoparticles for Capturing Aliphatic Alcohols: Halogen Bonding vs. Lone Pair-π Interactions.

In this study, Fe3O4 nanoparticles (FeNPs) decorated with halogenated perylene diimides (PDIs) have been used for capturing VOCs (volatile organic compounds) through noncovalent binding. Concretely, we have used tetrachlorinated/brominated PDIs as well as a nonhalogenated PDI as a reference system. On the other hand, methanol, ethanol, propanol, and butanol were used as VOCs. Experimental studies along with theoretical calculations (the BP86-D3/def2-TZVPP level of theory) pointed to two possible and likely competitive binding modes (lone pair-π through the π-acidic surface of the PDI and a halogen bond via the σ-holes at the Cl/Br atoms). More in detail, thermal desorption (TD) experiments showed an increase in the VOC retention capacity upon increasing the length of the alkyl chain, suggesting a preference for the interaction with the PDI aromatic surface. In addition, the tetrachlorinated derivative showed larger VOC retention times compared to the tetrabrominated analog. These results were complemented by several state-of-the-art computational tools, such as the electrostatic surface potential analysis, the Quantum Theory of Atoms in Molecules (QTAIM), as well as the noncovalent interaction plot (NCIplot) visual index, which were helpful to rationalize the role of each interaction in the VOC···PDI recognition phenomena.

Self-Assembly Behavior, Aggregation Structure, and the Charge Carrier Transport Properties of S-Heterocyclic Annulated Perylene Diimide Derivatives.

The construction of high-performance n-type semiconductors is crucial for the advancement of organic electronics. As an attractive n-type semiconductor, molecular systems based on perylene diimide derivatives (PDIs) have been extensively investigated over recent years. Owing to the fascinating aggregated structure and high performance, S-heterocyclic annulated PDIs (SPDIs) are receiving increasing attention. However, the relationship between the structure and the electrical properties of SPDIs has not been deeply revealed, restricting the progress of PDI-based organic electronics. Here, we developed two novel SPDIs with linear and dendronized substituents in the imide position, named linear SPDI and dendronized SPDI, respectively. A series of structural and property characterizations indicated that linear SPDI formed a long-range-ordered crystalline structure based on helical supramolecular columns, while dendronized SPDI, with longer alkyl side chains, formed a 3D-ordered crystalline structure at a low temperature, which transformed into a hexagonal columnar liquid crystal structure at a high temperature. Moreover, no significant charge carrier transport signal was examined for linear SPDI, while dendronized SPDI had a charge carrier mobility of 3.5 × 10-3 cm2 V-1 s-1 and 2.1 × 10-3 cm2 V-1 s-1 in the crystalline and liquid crystalline state, respectively. These findings highlight the importance of the structure-function relationship in PDIs, and also offer useful roadmaps for the design of high-performance organic electronics for down-to-earth applications.

Molecular Engineering of Perylene Diimide Polymers with a Robust Built-in Electric Field for Enhanced Solar-Driven Water Splitting.

The built-in electric field of the polymer semiconductors could be regulated by the dipole moment of its building blocks, thereby promoting the separation of photogenerated carriers and achieving efficient solar-driven water splitting. Herein, three perylene diimide (PDI) polymers, namely oPDI, mPDI and pPDI, are synthesized with different phenylenediamine linkers. Notably, the energy level structure, light-harvesting efficiency, and photogenerated carrier separation and migration of polymers are regulated by the orientation of PDI unit. Among them, oPDI enables a large dipole moment and robust built-in electric field, resulting in enhanced solar-driven water splitting performance. Under simulated sunlight irradiation, oPDI exhibits the highest photocurrent of 115.1 µA cm-2 for photoelectrochemical oxygen evolution, which is 11.5 times that of mPDI, 26.8 times that of pPDI and 104.6 times that of its counterparts PDI monomer at the same conditions. This work provides a strategy for designing polymers by regulating the orientation of structural units to construct efficient solar energy conversion systems.

Reduction-Induced Self-Propelled Oscillatory Motion of Perylenediimides on Water.

The emergence of macroscopic self-propelled oscillatory motion based on molecular design has attracted continual attention in relation to autonomous systems in living organisms. Herein, a series of perylenediimides (PDIs) with various imide side chains was prepared to explore the impact of molecular design and alignment on the self-propelled motion at the air-water interface. When placed on an aqueous solution containing a reductant, a solid disk of neutral PDI was reduced to form the water soluble, surface-active PDI dianion species, which induces a surface tension gradient in the vicinity of the disk for self-propelled motion. We found that centimeter-scale oscillatory motion could be elicited by controlling the supply rate of PDI dianion species through the reductant concentration and the structure of imide side chains. Furthermore, we found that the onset and speed of the self-propelled motion could be changed by the crystallinity of PDI at the water surface. This design principle using π-conjugated molecules and their self-assemblies could advance self-propelled, non-equilibrium systems powered by chemical energy.

Full-Spectrum Responsive Naphthalimide/Perylene Diimide with a Giant Internal Electric Field for Photocatalytic Overall Water Splitting.

The co-assembly naphthalimide/perylene diimide (NDINH/PDINH) supramolecular photocatalysts were successfully synthesized via a rapid solution dispersion method. A giant internal electric field (IEF) in co-assembly structure was built by the larger local dipole. NDINH coated on PDINH could reduce the reflected electric field over PDINH to improve its responsive activity to ultraviolet light. Resultantly, an efficient full-spectrum photocatalytic overall water splitting activity with H2 and O2 evolution rate of 317.2 and 154.8 µmol g-1 h-1 for NDINH/PDINH together with optimized O2 evolution rate with 2.61 mmol g-1 h-1 using AgNO3 as a sacrificial reagent were achieved. Meanwhile, its solar-to-hydrogen efficiency was enhanced to 0.13 %. The enhanced photocatalytic activity was primarily attributed to the IEF between NDINH and PDINH, significantly accelerating transfer and separation of photogenerated carriers. Additionally, a direct Z-Scheme pathway of carriers contributed to a high redox potential. The strategy provided a new perspective for the design of supramolecular photocatalysts.

Cation-Dependent Mixed Ionic-Electronic Transport in a Perylenediimide Small-Molecule Semiconductor.

A rapidly growing interest in organic bioelectronic applications has spurred the development of a wide variety of organic mixed ionic-electronic conductors. While these new mixed conductors have enabled the community to interface organic electronics with biological systems and efficiently transduce biological signals (ions) into electronic signals, the current materials selection does not offer sufficient selectivity towards specific ions of biological relevance without the use of auxiliary components such as ion-selective membranes. Here, we present the molecular design of an n-type (electron-transporting) perylene diimide semiconductor material decorated with pendant oligoether groups to facilitate interactions with cations such as Na+ and K+. Using the cyclic 15-crown-5 oligoether motif, we find that the resulting mixed conductor PDI-crown displays a strong dependence on the size of the electrolyte cation when tested in an organic electrochemical transistor configuration. In stark contrast to the low current response on the order of 1 µA observed with aqueous sodium chloride, a nearly 200-fold increase in current is observed with aqueous potassium chloride. We ascribe the high selectivity to extended molecular aggregation and therefore efficient charge transport in the presence of K+ due to a favourable sandwich-like structure between two adjacent 15-crown-5 motifs and the potassium ion.