[Characterization of Humicola insolens cutinase-tachystatin A2 fusion protein and its application in treatment of recycled paper stickies].

With the decrease of forest timber resources, the recycling of waste paper has received increasing attention. However, the stickies produced in the process of waste paper recycling may negatively affect the production of recycled paper. The biological decomposition of stickies, which has the advantages of high efficiency, high specificity and pollution-free, is achieved mainly through the enzymatic cleavage of the ester bond in the stickies components to prevent flocculation. Cutinase is a serine esterase that can degrade some components of the stickies. Previous research indicated that the anchor peptide tachystatin A2 (TA2) is able to bind polyurethane. In this study, the cutinase HiC derived from Humicola insolens was used to construct a fusion protein HiC-TA2 by megaprimer PCR of the whole plasmid (MEGAWHOP). The enzymatic properties and the degradation efficiency of the fusion protein on poly(ethyl acrylate) (PEA), a model substrate of stickies component, were determined. The results showed that the degradation efficiency, the size decrease of PEA particle, and the amount of ethanol produced by HiC-TA2 were 1.5 times, 6.8 times, and 1.4 times of that by HiC, respectively. These results demonstrated that TA2 improved the degradation efficiency of HiC on PEA. This study provides a useful reference for biological decomposition of stickies produced in the process of recycled paper production.

Plasma polymerised nanoscale coatings of controlled thickness for efficient solid-phase presentation of growth factors.

The engineering of biomaterial surfaces and scaffolds for specific biomedical and clinical application is of growing interest. Certain functionalised surfaces can capture and deliver bioactive molecules, such as growth factors (GF), enhancing the clinical efficacy of such systems. With a custom-made plasma polymerisation reactor described here we have developed bioactive polymer coatings based on poly(ethyl acrylate) (PEA). This remarkable polymer unfolds fibronectin (FN) upon adsorption to allow the GF binding region of FN to sequester and present GFs with high efficiency. We systematically evaluate process conditions and their impact on plasma polymerised PEA coatings and characterise the effect of plasma power and deposition time on thickness, wettability and chemical composition of the coatings. We demonstrate that functional substrate roughness can be maintained after deposition of the polymer coatings. Importantly, we show that coatings deposited at different conditions all maintain a similar or better bioactivity than spin coated PEA references. We show that in PEA plasma polymerised coatings FN assembles into nanonetworks with high availability of integrin and GF binding regions that sequester bone morphogenetic protein-2 (BMP-2). We also report similar mesenchymal stem cell adhesion behaviour, as characterised by focal adhesions, and differentiation potential on BMP-2 coated surfaces, regardless of plasma deposition conditions. This is a potent and versatile technology that can help facilitate the use of GFs in clinical applications.

Engineered microenvironments for synergistic VEGF - Integrin signalling during vascularization.

We have engineered polymer-based microenvironments that promote vasculogenesis both in vitro and in vivo through synergistic integrin-growth factor receptor signalling. Poly(ethyl acrylate) (PEA) triggers spontaneous organization of fibronectin (FN) into nanonetworks which provide availability of critical binding domains. Importantly, the growth factor binding (FNIII12-14) and integrin binding (FNIII9-10) regions are simultaneously available on FN fibrils assembled on PEA. This material platform promotes synergistic integrin/VEGF signalling which is highly effective for vascularization events in vitro with low concentrations of VEGF. VEGF specifically binds to FN fibrils on PEA compared to control polymers (poly(methyl acrylate), PMA) where FN remains in a globular conformation and integrin/GF binding domains are not simultaneously available. The vasculogenic response of human endothelial cells seeded on these synergistic interfaces (VEGF bound to FN assembled on PEA) was significantly improved compared to soluble administration of VEGF at higher doses. Early onset of VEGF signalling (PLCγ1 phosphorylation) and both integrin and VEGF signalling (ERK1/2 phosphorylation) were increased only when VEGF was bound to FN nanonetworks on PEA, while soluble VEGF did not influence early signalling. Experiments with mutant FN molecules with impaired integrin binding site (FN-RGE) confirmed the role of the integrin binding site of FN on the vasculogenic response via combined integrin/VEGF signalling. In vivo experiments using 3D scaffolds coated with FN and VEGF implanted in the murine fat pad demonstrated pro-vascularization signalling by enhanced formation of new tissue inside scaffold pores. PEA-driven organization of FN promotes efficient presentation of VEGF to promote vascularization in regenerative medicine applications.

Topologically controlled hyaluronan-based gel coatings of hydrophobic grid-like scaffolds to modulate drug delivery.

Scaffolds based on poly(ethyl acrylate) having interwoven channels were coated with a hyaluronan (HA) hydrogel to be used in tissue engineering applications. Controlled typologies of coatings evolving from isolated aggregates to continuous layers, which eventually clog the channels, were obtained by using hyaluronan solutions of different concentrations. The efficiency of the HA loading was determined using gravimetric and thermogravimetric methods, and the hydrogel loss during the subsequent crosslinking process was quantified, seeming to depend on the mass fraction of hyaluronan initially incorporated to the pores. The effect of the topologically different coatings on the scaffolds, in terms of mechanical properties and swelling at equilibrium under different conditions was evaluated and correlated with the hyaluronan mass fraction. The potential of these hydrogel coatings as vehicle for controlled drug release from the scaffolds was validated using a protein model.

Scaffolds of Hyaluronic Acid-Poly(Ethyl Acrylate) Interpenetrating Networks: Characterization and In Vitro Studies.

Hyaluronic acid (HA) provides many advantages to regenerative implants through its bioactive properties, but it also has many limitations as a biomaterial if it is not chemically modified. In order to overcome some of these limitations, HA has been combined with poly(ethyl acrylate) in the form of interpenetrating polymeric networks (IPNs), in which the HA network is crosslinked with divinyl sulfone. Scaffolds of this IPN have been produced through a template-leaching methodology, and their properties have been compared with those of single-network scaffolds made of either PEA or crosslinked HA. A fibroblast cell line has been used to assess the in vitro performance of the scaffolds, revealing good cell response and a differentiated behavior on the IPN surface when compared to the individual polymers. Altogether, the results confirm that this type of material offers an interesting microenvironment for cells, which can be further improved toward its potential use in medical implants.

Role of chemical crosslinking in material-driven assembly of fibronectin (nano)networks: 2D surfaces and 3D scaffolds.

Poly(ethyl acrylate) (PEA) induces the formation of biomimetic fibronectin (FN) (nano)networks upon simple adsorption from solutions, a process referred to as material-driven FN fibrillogenesis. The ability of PEA to organize FN has been demonstrated in 2D and 2.5D environments, but not as yet in 3D scaffolds, which incorporate three-dimensionality and chemical crosslinkers that may influence its fibrillogenic potential. In this paper we show for the first time that while three-dimensionality does not interfere with PEA-induced FN fibrillogenesis, crosslinking does, and we determined the maximum amount of crosslinker that can be added to PEA to maintain FN fibrillogenesis. For this, we synthesised 2D substrates with different amounts of crosslinker (1-10% of ethylene glycol dimethacrylate) and studied the role of crosslinking in FN organization using AFM. The glass transition temperature was seen to increase with crosslinking density and, accordingly, polymer segmental mobility was reduced. The organization of FN after adsorption (formation of FN fibrils) and the availability of the FN cell-binding domain were found to be dependent on crosslinking density. Surface mobility was identified as a key parameter for FN supramolecular organization. PEA networks with up to 2% crosslinker organize the FN in a similar way to non-crosslinked PEA. Scaffolds prepared with 2% crosslinker also had FN (nano)networks assembled on their walls, showing PEA's ability to induce FN fibrillogenesis in 3D environments as long as the amounts of crosslinker is low enough.

Prediction of the "in vivo" mechanical behavior of biointegrable acrylic macroporous scaffolds.

This study examines a biocompatible scaffold series of random copolymer networks P(EA-HEA) made of Ethyl Acrylate, EA, and 2-Hydroxyl Ethyl Acrylate, HEA. The P(EA-HEA) scaffolds have been synthesized with varying crosslinking density and filled with a Poly(Vinyl Alcohol), PVA, to mimic the growing cartilaginous tissue during tissue repair. In cartilage regeneration the scaffold needs to have sufficient mechanical properties to sustain the compression in the joint and, at the same time, transmit mechanical signals to the cells for chondrogenic differentiation. Mechanical tests show that the elastic modulus increases with increasing crosslinking density of P(EA-HEA) scaffolds. The water plays an important role in the mechanical behavior of the scaffold, but highly depends on the crosslinking density of the proper polymer. Furthermore, when the scaffold with hydrogel is tested it can be seen that the modulus increases with increasing hydrogel density. Even so, the mechanical properties are inferior than those of the scaffolds with water filling the pores. The hydrogel inside the pores of the scaffolds facilitates the expulsion of water during compression and lowers the mechanical modulus of the scaffold. The P(EA-HEA) with PVA shows to be a good artificial cartilage model with mechanical properties close to native articular cartilage.

Graft copolymerization of ethyl acrylate onto tamarind kernel powder, and evaluation of its biodegradability.

In the present study, tamarind kernel powder and ethyl acrylate were reacted by free radical polymerization to synthesize a grafted copolymer soluble in water. The grafted copolymer was analyzed by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR); FTIR showed a shift of the vibration of R-CO-OR' from 1258 cm(-1) to 1253 cm(-1). This shift appeared because of the grafting copolymerization. Films were prepared to study the mechanical properties and the biodegradation of this material. The mechanical properties of the grafted copolymer were found to lie between those of the parent polymers, suitable for disposable products. The new grafted copolymer manifested a steady process of biodegradation under incubation with the bacterial strain Alicycliphilus sp. BQ1; this was proved by scanning electron microscopy (SEM) and near infrared spectroscopy (NIR).

New semi-biodegradable materials from semi-interpenetrated networks of poly(ϵ-caprolactone) and poly(ethyl acrylate).

Semi-degradable materials may have many applications. Here poly(ethyl acrylate) and poly(ϵ-caprolactone) were combined as semi-interpenetrated networks, and thoroughly characterized in terms of final composition, interactions between components, wettability, and mechanical properties. PCL modulates the mechanical properties of the PEA elastomeric network. Cultures of fibroblasts and adipose-tissue derived stem cells showed excellent biological performance of the materials. The results are relevant for applications seeking materials leaving a permanent supporting skeleton after the partial degradation, as in patches for cardiac regeneration or in abdominal wall meshes.

Microfluidic conceived Trojan microcarriers for oral delivery of nanoparticles.

In this study, we report on a novel method for the synthesis of poly(acrylamide) Trojan microparticles containing ketoprofen loaded poly(ethyl acrylate) or poly(methyl acrylate) nanoparticles. To develop these composite particles, a polymerizable nanoemulsion was used as a template. This nanoemulsion was obtained in an elongational-flow micromixer (µRMX) which was linked to a capillary-based microfluidic device for its emulsification into micron range droplets. Downstream, the microdroplets were hardened into Trojan particles in the size range of 213-308 µm by UV initiated free radical polymerization. The nanoemulsion size varied from 98 -132 nm upon changes in surfactant concentration and number of operating cycles in µRMX. SEM and confocal microscopy confirmed the Trojan morphology. Under SEM it was observed that the polymerization reduced the size of the nanoemulsion down to 20-32 nm for poly(ethyl acrylate) and 10-15 nm for poly(methyl acrylate) nanoparticles. This shrinkage was confirmed by cryo-TEM studies. We further showed that Trojan microparticles released embedded nanoparticles on contact with suitable media as confirmed by transmission electron microscopy. In a USP phosphate buffer solution of pH 6.8, Trojan microparticles containing poly(ethyl acrylate) nanoparticles released 35% of encapsulated ketoprofen over 24h. The low release of the drug was attributed to the overall low concentration of nanoparticles and attachment of some of nanoparticles to the poly(acrylamide) matrix. Thus, this novel method has shown possibility to develop Trojan particles convieniently with potential to deliver nanoparticles in the gastrointestinal tract.

Biointegration of corneal macroporous membranes based on poly(ethyl acrylate) copolymers in an experimental animal model.

Currently available keratoprosthesis models (nonbiological corneal substitutes) have a less than 75% graft survival rate at 2 years. We aimed at developing a model for keratoprosthesis based on the use of poly(ethyl acrylate) (PEA)-based copolymers, extracellular matrix-protein coating and colonization with adipose-derived mesenchymal stem cells. Human adipose tissue derived mesenchymal stem cells (h-ADASC) colonization efficiency of seven PEA-based copolymers in combination with four extracellular matrix coatings were evaluated in vitro. Then, macroporous membranes composed of the optimal PEA subtypes and coating proteins were implanted inside rabbit cornea. After a 3-month follow-up, the animals were euthanized, and the clinical and histological biointegration of the implanted material were assessed. h-ADASC adhered and survived when cultured in all PEA-based macroporous membranes. The addition of high hydrophilicity to PEA membranes decreased h-ADASC colonization in vitro. PEA-based copolymer containing 10% hydroxyethyl acrylate (PEA-HEA10) or 10% acrylic acid (PEA-AAc10) monomeric units showed the best cellular colonization rates. Collagen plus keratan sulfate-coated polymers demonstrated enhanced cellular colonization respect to fibronectin, collagen, or uncoated PEAs. In vivo implantation of membranes resulted in an extrusion rate of 72% for PEA, 50% for PEA-AAc10, but remarkably of 0% for PEA-HEA10. h-ADASC survival was demonstrated in all the membranes after 3 months follow-up. A slight reduction in the extrusion rate of h-ADASC colonized materials was observed. No significant differences between the groups with and without h-ADASC were detected respect to transparency or neovascularization. We propose PEA with low hydroxylation as a scaffold for the anchoring ring of future keratoprosthesis.

Comparative pharmacokinetics of a new oral long-acting formulation of doxycycline hyclate: A canine clinical trial.

Doxycicline is used in dogs as treatment of several bacterial infections, mycoplasma, chlamydia and rickettsial diseases. However, it requires long treatments and several doses to be effective. The aim of this study was to determine the pharmacokinetics of four formulations of doxycycline hyclate, administered orally, with different proportions of excipients, acrylic acid-polymethacrylate-based matrices, to obtain longer therapeutic levels than conventional formulation. Forty-eight dogs were randomly assigned in five groups to receive a single oral dose (20mg/kg) of doxycycline hyclate without excipients (control) or a long-acting formulation containing doxycycline, acrylic acid polymer, and polymethacrylate in one of the following four proportions: DOX1(1:0.25:0.0035), DOX2(1:0.5:0.0075), DOX3 (1:1:0.015), or DOX4(1:2:0.0225). Temporal profiles of serum concentrations were obtained at several intervals after each treatment. Therapeutic concentrations were observed for 60h for DOX1 and DOX4, 48h for DOX2 and DOX3 and only 24h for DOX-C. None of the pharmacokinetic parameter differed significantly between DOX1 and DOX2 or between DOX3 and DOX4; however, the findings for the control treatment were significantly different compared to all four long-acting formulations. Results indicated that DOX1 had the most adequate pharmacokinetic-pharmacodynamic relationships for a time-dependent drug and had longer release times than did doxycycline alone. However, all four formulations can be effective depend on the minimum effective serum doxycycline concentration of the microorganism being treated. These results suggest that the use of any of these formulations can reduce the frequency of administration, the patient's stress, occurrence of adverse effects and the cost of treatment.

Macroporous thin membranes for cell transplant in regenerative medicine.

The aim of this paper is to present a method to produce macroporous thin membranes made of poly (ethyl acrylate-co-hydroxyethyl acrylate) copolymer network with varying cross-linking density for cell transplantation and prosthesis fabrication. The manufacture process is based on template techniques and anisotropic pore collapse. Pore collapse was produced by swelling the membrane in acetone and subsequently drying and changing the solvent by water to produce 100 microns thick porous membranes. These very thin membranes are porous enough to hold cells to be transplanted to the organism or to be colonized by ingrowth from neighboring tissues in the organism, and they present sufficient tearing stress to be sutured with surgical thread. The obtained pore morphology was observed by Scanning Electron Microscope, and confocal laser microscopy. Mechanical properties were characterized by stress-strain experiments in tension and tearing strength measurements. Morphology and mechanical properties were related to the different initial thickness of the scaffold and the cross-linking density of the polymer network. Seeding efficiency and proliferation of mesenchymal stem cells inside the pore structure were determined at 2 h, 1, 7, 14 and 21 days from seeding.

Fibronectin fixation on poly(ethyl acrylate)-based copolymers.

The aim of this paper is to quantify the adhered fibronectin (FN; by adsorption and/or grafting) and the exposure of its cell adhesive motifs (RGD and FNIII7-10) on poly(ethyl acrylate) (PEA) copolymers whose chemical composition has been designed to increase wettability and to introduce acid functional groups. FN was adsorbed to PEA, poly(ethyl acrylate-co-hydroxyethyl acrylate), poly(ethyl acrylate-co-acrylic acid), and poly(ethyl acrylate-co-methacrylic acid) copolymers, and covalently cross-linked to poly(ethyl acrylate-co-acrylic acid) and poly(ethyl acrylate-co-methacrylic acid) copolymers. Amount of adhered FN and exhibition of RGD and FNIII7- 10 fragments involved in cell adhesion were quantified with enzyme-linked immunosorbent assay tests. Even copolymers with a lower content of the hydrophilic component showed a decrease in water contact angle. In addition, FN was successfully fixed on all surfaces, especially on the hydrophobic surfaces. However, it was demonstrated that exposure of its cell adhesion sequences, which is the key factor in cell adhesion and proliferation, was higher for hydrophilic surfaces.

Combining self-assembling peptide gels with three-dimensional elastomer scaffolds.

Some of the problems raised by the combination of porous scaffolds and self-assembling peptide (SAP) gels as constructs for tissue engineering applications are addressed for the first time. Scaffolds of poly(ethyl acrylate) and the SAP gel RAD16-I were employed. The in situ gelation of the SAP gel inside the pores of the scaffolds was studied. The scaffold-cum-gel constructs were characterized morphologically, physicochemically and mechanically. The possibility of incorporating an active molecule (bovine serum albumin, taken here as a model molecule for others) in the gel within the scaffold's pores was assessed, and the kinetics of its release in phosphate-buffered saline was followed. Cell seeding and colonization of these constructs were preliminarily studied with L929 fibroblasts and subsequently checked with sheep adipose-tissue-derived stem cells intended for further preclinical studies. Static (conventional) and dynamically assisted seedings were compared for bare scaffolds and the scaffold-cum-gel constructs. The SAP gel inside the pores of the scaffold significantly improved the uniformity and density of cell colonization of the three-dimensional (3-D) structure. These constructs could be of use in different advanced tissue engineering applications, where, apart from a cell-friendly extracellular matrix -like aqueous environment, a larger-scale 3-D structure able to keep the cells in a specific place, give mechanical support and/or conduct spatially the tissue growth could be required.