Photobiocidal Activity of TiO2/UHMWPE Composite Activated by Reduced Graphene Oxide under White Light.

Herein, we introduce a photobiocidal surface activated by white light. The photobiocidal surface was produced through thermocompressing a mixture of titanium dioxide (TiO2), ultra-high-molecular-weight polyethylene (UHMWPE), and reduced graphene oxide (rGO) powders. A photobiocidal activity was not observed on UHMWPE-TiO2. However, UHMWPE-TiO2@rGO exhibited potent photobiocidal activity (>3-log reduction) against Staphylococcus epidermidis and Escherichia coli bacteria after a 12 h exposure to white light. The activity was even more potent against the phage phi 6 virus, a SARS-CoV-2 surrogate, with a >5-log reduction after 6 h exposure to white light. Our mechanistic studies showed that the UHMWPE-TiO2@rGO was activated only by UV light, which accounts for 0.31% of the light emitted by the white LED lamp, producing reactive oxygen species that are lethal to microbes. This indicates that adding rGO to UHMWPE-TiO2 triggered intense photobiocidal activity even at shallow UV flux levels.

Compressible and Elastic Reduced Graphene Oxide Sponge for Stable and Dendrite-Free Lithium Metal Anodes.

Dendritic Li deposition, an unstable solid-electrolyte interphase (SEI), and a nearly infinite relative volume change during cycling are three major obstacles to the practical application of Li metal batteries. Herein, we introduce a compressible and elastic reduced graphene oxide sponge (rGO-S) to simultaneously eliminate Li dendrite growth, stabilize the SEI, and accommodate the volume change. The volume change is contained by compressing and expanding the rGO-S anode, which effectively releases the Li plating-induced stress during cycling. The smooth and dense Li metal is deposited on rGO-S without dendrites, which preserves the SEI, reduces consumption of the electrolyte, and prevents the formation of Li debris. The half-cells employing rGO-S show a steady and high Coulombic efficiency. The Li@rGO-S symmetric cells demonstrate excellent cycling stability over 1200 cycles with a low overpotential. When paired with LiFePO4 (LFP), the Li@rGO-S||LFP full cells exhibit a high specific capacity (150.3 mAh g-1 at 1C), superior rate performance, and good capacity retention.

Interfacial Layers with Desolvation Function Induced Stable Deposition of Lithium Metal for Long-Cycling Lithium Metal Batteries.

The unstable solid electrolyte interface (SEI) formed by uncontrollable electrolyte degradation, which leads to dendrite growth and Coulombic efficiency decay, hinders the development of Li metal anodes. A controllable desolvation process is essential for the formation of stable SEI and improved lithium metal deposition behavior. Here, we show a functional artificial interface protective layer comprised of chondroitin sulfate-reduced graphene oxide (CrG), on which polar functional groups are distributed to effectively reduce the energy barrier for desolvation of Li+ and effectively alienate solvent molecules to avoid solvent involvement in SEI formation, thus promoting the formation of a LiF-rich SEI. Consequently, stable Coulombic efficiencies of 98.4% were achieved after 500 cycles in a Li//Cu cell. Moreover, the LiFePO4 full cells achieve steady circulation (470 cycles at 80%, 1 C) with a negative/positive electrode capacity ratio of 2.87. Our multifunctional artificial interface protective layer provides a new way to advance Li metal batteries.

A Novel Approach Using Reduced Graphene Oxide for the Detection of ALP and RUNX2 Osteogenic Biomarkers.

In this work, we propose a new technique involving the modification of commercial screen-printed carbon electrodes with electrochemically reduced graphene oxide to serve as the starting point of a future electrochemical biosensor for the detection of two osteogenic biomarkers: alkaline phosphatase (ALP) and Runt-related transcription factor 2 (RUNX2). The electrodes were characterized after each modification by cyclic voltammetry and electrochemical impedance spectroscopy, showing the appropriate electrochemical characteristics for each modification type. The results obtained from scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and contact angle measurements are well correlated with each other, demonstrating the successful modification of the electrodes with graphene oxide and its subsequent reduction. The bioreceptors were immobilized on the electrodes by physical adsorption, which was confirmed by electrochemical methods, structural characterization, and contact angle measurements. Finally, the functionalized electrodes were incubated with the specific target analytes and the detection relied on monitoring the electrochemical changes occurring after the hybridization process. Our results indicated that the pilot platform has the ability to detect the two biomarkers up to 1 nM, with increased sensitivity observed for RUNX2, suggesting that after further optimizations, it has a high potential to be employed as a future biosensor.

Transformation of 2D Flakes to 3D Hollow Bowls: Matthew Effect Enables Defects to Prevail in Electromagnetic Wave Absorption of Hollow rGO Bowls.

High-efficiency electromagnetic (EM) wave (EMW)-absorbing materials have attracted extensive scientific and technical interest. Although identifying the dominant EM loss mechanism in dielectric-loss materials is indispensable, it is challenging due to a complex synergism between dipole/interfacial polarization and conduction loss. Modulation of defects and microstructures can be a possible approach to determine the dominant EM loss mechanism and realize high-efficiency absorption. Herein, 2D reduced graphene oxide (rGO) flakes are integrated into a 3D hollow bowl-like structure, which increases defect sites (i.e., oxygen vacancy and lattice defect) and reduces the stacked thickness of rGO. Despite their lower stacked thicknesses, the hollow rGO bowls with more defects exhibit lower conductivities but higher permittivities. Accompanied by the transformation from 2D flakes to 3D hollow bowls, the dominant EM loss mechanism of rGO transforms from conduction loss to defect-induced polarization. Furthermore, the defect engineering and structural design endow rGO with well-matched impedance and strong EMW-absorbing capacity. A minimum reflection loss of -41.6 dB (1.3 mm) and an effective absorption bandwidth of 4.8 GHz (1.5 mm) is achieved at a filler loading of 5 wt%. This study will provide meaningful insights into the development of materials with superior EMW-absorbing performances via defect engineering and structural design.

Rational Design of High-Performance Electrodes Based on Ferric Oxide Nanosheets Deposited on Reduced Graphene Oxide for Advanced Hybrid Supercapacitors.

The core strategy for constructing ultra-high-performance hybrid supercapacitors is the design of reasonable and effective electrode materials. Herein, a facile solvothermal-calcination strategy is developed to deposit the phosphate-functionalized Fe2O3 (P-Fe2O3) nanosheets on the reduced graphene oxide (rGO) framework. Benefiting from the superior conductivity of rGO and the high conductivity and fast charge storage dynamics of phosphate ions, the synthesized P-Fe2O3/rGO anode exhibits remarkable electrochemical performance with a high capacitance of 586.6 F g-1 at 1 A g-1 and only 4.0% capacitance loss within 10 000 cycles. In addition, the FeMoO4/Fe2O3/rGO nanosheets are fabricated by utilizing Fe2O3/rGO as the precursor. The introduction of molybdates successfully constructs open ion channels between rGO layers and provides abundant active sites, enabling the excellent electrochemical features of FeMoO4/Fe2O3/rGO cathode with a splendid capacity of 475.4 C g-1 at 1 A g-1. By matching P-Fe2O3/rGO with FeMoO4/Fe2O3/rGO, the constructed hybrid supercapacitor presents an admirable energy density of 82.0 Wh kg-1 and an extremely long working life of 95.0% after 20 000 cycles. Furthermore, the continuous operation of the red light-emitting diode for up to 30 min demonstrates the excellent energy storage properties of FeMoO4/Fe2O3/rGO//P-Fe2O3/rGO, which provides multiple possibilities for the follow-up energy storage applications of the iron-based composites.

2D Microporous Polymers/Reduced Graphene Oxide with Built-In Lithiophilic Sites for Uniform Lithium Deposition in Lithium Metal Anode.

Lithium (Li) metal is an attractive anode material for use in high-energy lithium-sulfur and lithium-air batteries. However, its practical application is severely impeded by excessive dendrite growth, huge volume changes, and severe side reactions. Herein, a novel Li metal anode composed of lithiophilic two dimensional (2D) conjugated microporous polymer (Li-CMP) and reduced graphene oxide (rGO) sandwiches (Li-CMP@rGO) for Li metal batteries (LiMBs) is reported. In the Li-CMP@rGO anode, the conductive rGO facilitates the charge transfer while the functionalized-CMP provides Li nucleation sites within the micropores, thereby preventing dendrite growth. As a result, the Li-CMP@rGO anode can be cycled smoothly at 6 mA cm-2 of current density with a platting capacity of 2 mAh cm-2 for 1000 h. A Coulombic efficiency of 98.4% is achieved over 350 cycles with a low overpotential of 28 mV. In a full cell with LiFePO4 cathode, the Li-CMP@rGO anode also exhibited good cycling stability compared to CMP@rGO and CMP/Super-P. As expected, the simulation results reveal that Li-CMP@rGO has a strong affinity for Li ions compared to CMP@rGO. The strategies adopted in this work can open new avenues for designing hybrid porous host materials for developing safe and stable Li metal anodes.

2D Tantalum Disulfide Reduction Strategy Customized Ta2O5/rGO Heterointerface Aerogel Toward Boosting Electromagnetic Wave Absorption and Flame Retardancy.

The exceptional and substantial electron affinity, as well as the excellent chemical and thermal stability of transition metal oxides (TMOs), infuse infinite vitality into multifunctional applications, especially in the field of electromagnetic wave (EMW) absorption. Nonetheless, the suboptimal structural mechanical properties and absence of structural regulation continue to hinder the advancement of TMOs-based aerogels. Herein, a novel 2D tantalum disulfide (2H-TaS2) reduction strategy is demonstrated to synthesize Ta2O5/reduced graphene oxide (rGO) heterointerface aerogels with unique characters. As the prerequisite, the defects, interfaces, and configurations of aerogels are regulated by varying the concentration of 2H-TaS2 to ensure the Ta2O5/rGO heterointerface aerogels with appealing EMW absorption properties such as a minimum reflection loss (RLmin) of -61.93 dB and an effective absorption bandwidth (EAB) of 8.54 GHz (7.80-16.34 GHz). This strategy provides valuable insights for designing advanced EMW absorbers. Meanwhile, the aerogel exhibits favorable thermal insulation performance with a value of 36 mW m-1 K-1, outstanding fire resistance capability, and exceptional mechanical energy dissipation performance, making it promising for applications in the aerospace industry and consumer electronics devices.

Advanced Li-S Battery Configuration Featuring Sulfur-Coated Separator and Interwoven rGO/CNT Fabric Current Collector.

The development of lithium-sulfur batteries (LSBs) marks a crucial milestone in advancing energy storage solutions essential for sustainable energy transitions. With high theoretical specific capacity, cost-effectiveness, and reduced ecological footprint, LSBs promise to enhance electric vehicle ranges, extend portable electronics' operational times, and stabilize grids integrated with renewable energy. However, challenges like complex processing, electrode instability, and poor cycling stability hinder their commercialization. This study introduces a novel battery design that addresses these issues by coating sulfur directly onto the separator instead of the current collector, demonstrating that active sulfur can be effectively utilized without being incorporated into the electrode structure. Using an interwoven substrate made from carbon nanotube (CNT) fabric adorned with reduced graphene oxide (rGO), this setup enhances manufacturing scalability, supports optimal sulfur utilization, and improves battery performance. The rGO decoration provides multiple highly conductive polysulfide trapping sites, enhancing active material reutilization, while the flexibility and mechanical strength of CNT fabric contribute to electrode integrity. This combination boosts electrical conductivity and polysulfide-capturing capability, effectively managing migrating sulfur species during charge-discharge cycles and mitigating sulfur loss and polysulfide shuttling. The results demonstrate superior cycling stability and efficiency, highlighting the potential of this approach in advancing LSB technology.

Cyanogel-Transformed Porous Palladium and Iron Framework Intermixed with rGO for Wearable Hydrogen Sensing.

Wearable hydrogen (H2) sensing is necessary to monitor the H2 leakage in its transportation and storage, of which ppm-concentration detection limit and fast response at room temperature are highly desired. Here, a wearable H2 sensing working at room temperature is developed with palladium and iron framework intermixed with reduced graphene oxide (rGO//Pd-Fe FW), which is synthesized by combined Pd-Fe cyanogel immobilized with graphene oxide as precursor and in situ reduction. As-prepared rGO//Pd-Fe FW is observed with porous FW structure composed of interconnected Pd-Fe nanoparticles, in which rGO is evenly intermixed. Beneficially, rGO//Pd-Fe FW exhibits 2 ppm low detection limit and 2 s fast response (1 v/v% H2) at room temperature. Such excellent H2 sensing performance may be attributed to the synergistic effect of the optimized Pd-Fe FW's catalytic activity, boosted electron transfers between Pd hydride and rGO, and enriched adsorption sites over porous FW's surface. Practically, the perceptron learning algorithm combined with principal component analysis is conducted to identify the H2 leakage, and the wearable H2 sensing devices are built by integrating rGO//Pd-Fe FW over the paper and flexible printed circuit board with reliable sensing responses.

Encapsulating Bi Nanoparticles in Reduced Graphene Oxide with Strong Interfacial Bonding toward Advanced Potassium Storage.

Bismuth (Bi) is regarded as a promising anode material for potassium ion batteries (PIBs) due to its high theoretical capacity, but the huge volume expansion during potassiation and intrinsic low conductivity cause poor cycle stability and rate capability. Herein, a unique Bi nanoparticles/reduced graphene oxide (rGO) composite is fabricated by anchoring the Bi nanoparticles over the rGO substrate through a ball-milling and thermal reduction process. As depicted by the in-depth XPS analysis, strong interfacial Bi-C bonding can be formed between Bi and rGO, which is beneficial for alleviating the huge volume expansion of Bi during potassiation, restraining the aggregation of Bi nanoparticles and promoting the interfacial charge transfer. Theoretical calculation reveals the positive effect of rGO to enhance the potassium adsorption capability and interfacial electron transfer as well as reduce the diffusion energy barrier in the Bi/rGO composite. Thereby, the Bi/rGO composite exhibits excellent potassium storage performances in terms of high capacity (384.8 mAh g-1 at 50 mA g-1), excellent cycling stability (197.7 mAh g-1 after 1000 cycles at 500 mA g-1 with no capacity decay) and superior rate capability (55.6 mAh g-1 at 2 A g-1), demonstrating its great potential as an anode material for PIBs.

Robust Spin Liquidity in 2D Metal-Organic Framework Cu3 (HHTP)2 with S=1 /2 Kagome Lattice.

On one hand electron or hole doping of quantum spin liquid (QSL) may unlock high-temperature superconductivity and on the other hand it can disrupt the spin liquidity, giving rise to a magnetically ordered ground state. Recently, a 2D MOF, Cu3 (HHTP)2 (HHTP - 2,3,6,7,10,11-hexahydroxytriphenylene), containing Cu(II) S= 1 / 2 ${{ 1/2 }}$ frustrated spins in the Kagome lattice is emerging as a promising QSL candidate. Herein, we present an elegant in situ redox-chemistry strategy of anchoring Cu3 (HHTP)2 crystallites onto diamagnetic reduced graphene oxide (rGO) sheets, resulting in the formation of electron-doped Cu3 (HHTP)2 -rGO composite which exhibited a characteristic semiconducting behavior (5 K to 300 K) with high electrical conductivity of 70 S ⋅ m-1 and a carrier density of ~1.1×1018  cm-3 at 300 K. Remarkably, no magnetic transition in the Cu3 (HHTP)2 -rGO composite was observed down to 1.5 K endorsing the robust spin liquidity of the 2D MOF Cu3 (HHTP)2 . Specific heat capacity measurements led to the estimation of the residual entropy values of 28 % and 34 % of the theoretically expected value for the pristine Cu3 (HHTP)2 and Cu3 (HHTP)2 -rGO composite, establishing the presence of strong quantum fluctuations down to 1.5 K (two times smaller than the value of the exchange interaction J).

Electrochemical biosensor based on copper sulfide/reduced graphene oxide/glucose oxidase construct for glucose detection.

Due to the current increase in the number of people suffering from diabetes worldwide, how to monitor the blood glucose level in the human body has become an urgent problem to be solved nowadays. The electrochemical sensor method can be used for real-time glucose monitoring due to its advantages of real-time monitoring capability and high sensitivity. Reduced graphene oxide (rGO) has great potential for application in the field of sensors due to its advantages of large specific surface area, high stability, and good electrical and thermal conductivity. Meanwhile, the synergistic effect between two-dimensional transition metal sulfides and graphene can improve the electrochemical performance of materials due to their similar mechanical flexibility and strength. This article uses flake graphite, copper sulfate, and glucose oxidase (GOx) as raw materials to prepare CuS/rGO/GOx/GCE electrodes, and explores the performance of electrode electrocatalysis for glucose. The results showed that the prepared sensor was characterized by a low detection limit (1.75 nM) and a wide linear range (0.1-100 mM) for glucose detection, displaying a good overall detection performance, and its sensing mechanism and dynamic process were also investigated. In addition, the sensor has outstanding selectivity, anti-interference, repeatability, reproducibility and practicality.

High-performance flexible piezoelectric nanogenerator assisted by a three-phase PVDF/WS2/rGO nanocomposite.

The emergence of piezoelectric nanogenerators (PENGs) presents a promising alternative to supply energy demands within the realms of portable and miniaturized devices. In this article, the role of 2D transition metal dichalcogenide tungsten sulfide (WS2) and conductive rGO sheets as filler materials inside the polyvinylidene fluoride (PVDF) matrix on piezoelectric performances has been investigated extensively. The strong electrostatic interaction between C-F and C-H monomer bonds of PVDF interacted with the large surface area of the WS2nanosheets, increasing the electroactive polar phases and resulting in enhanced ferroelectricity in the PVDF/WS2nanocomposite. Further, the inclusion of rGO sheets in the PVDF/WS2composite allows mobile charge carriers to move freely through the conductive network provided by the rGO basal planes, which improves the internal polarization of the PVDF/WS2/rGO nanocomposites and increases the electrical performance of the PENGs. The PVDF/WS2/0.3rGO nanocomposite-based PENG exhibits maximum piezoresponses with ∼8.1 times enhancements in the output power density than the bare PVDF-based PENG. The mechanism behind the enhanced piezoresponses in the PVDF/WS2/rGO nanocomposites has been discussed.

The therapeutic potential of reduced graphene oxide in attenuating cuprizone-induced demyelination in mice.

Reduced graphene oxide (rGO) has unique physicochemical properties that make it suitable for therapeutic applications in neurodegenerative scenarios. This study investigates the therapeutic potential of rGO in a cuprizone-induced demyelination model in mice through histomorphological techniques and analysis of biochemical parameters. We demonstrate that daily intraperitoneal administration of rGO (1 mg ml-1) for 21 days tends to reduce demyelination in theCorpus callosumby decreasing glial cell recruitment during the repair mechanism. Additionally, rGO interferes with oxidative stress markers in the brain and liver indicating potential neuroprotective effects in the central nervous system. No significant damage to vital organs was observed, suggesting that multiple doses could be used safely. However, further long-term investigations are needed to understand rGO distribution, metabolism, routes of action and associated challenges in central neurodegenerative therapies. Overall, these findings contribute to the comprehension of rGO effectsin vivo, paving the way for possible future clinical research.

Optimizing graphene content in scaffolds for evenly distributed crumpled MoS2paper wads as anodes for high-performance Li-ion batteries.

Lithium-ion batteries (LIBs) have revolutionized portable electronics, yet their conventional graphite anodes face capacity limitations. Integrating graphene and 3D molybdenum disulfide (MoS2) offers a promising solution. Ensuring a uniform distribution of 3D MoS2nanostructures within a graphene matrix is crucial for optimizing battery performance and preventing issues like agglomeration and capacity degradation. This study focuses on synthesizing a uniformly distributed paper wad structure by optimizing a composite of reduced graphene oxide RGO@MoS2through structural and morphological analyses. Three composites with varying graphene content were synthesized, revealing that the optimized sample containing 30 mg RGO demonstrates beneficial synergy between MoS2and RGO. The interconnected RGO network enhances reactivity and conductivity, addressing MoS2aggregation. Experimental results exhibit an initially superior capacity of 911 mAh g-1, retained at 851 mAh g-1even after 100 cycles at 0.1 A g-1current density, showcasing improved rate efficiency and long-term stability. This research underscores the pivotal role of graphene content in customizing RGO@MoS2composites for enhanced LIB performance.

Metal cation crosslinked, partially reduced graphene oxide membranes with enhanced stability for high salinity, produced water treatment by pervaporative separation.

Graphene oxide (GO)-based membranes hold significant promise for applications ranging from energy storage to protective coatings, to saline water and produced water treatment, owing to their chemical stability and unique barrier properties achieving a high selectivity for water permeation. However, unmodified GO membranes are not stable when submerged in liquid water, creating challenges with their commercial utilization in aqueous filtration and pervaporation applications. To mitigate this, we develop an approach to modify GO membranes through a combination of low temperature thermal reduction and metal cation crosslinking. We demonstrate that Zn2+-rGO and Fe3+-rGO membranes had the highest permeation flux of 8.3 ± 1.5 l m-2h-1and 7.0 ± 0.4 l m-2h-1, for saline water separation, respectively, when thermally reduced after metal cross-linking; These membranes maintained a high flux of 7.5 ± 0.7 l m-2h-1, and 5.5 ± 0.3 l m-2h-1for produced water separation, respectively. All the membranes had a salt rejection higher than 99%. Fe3+crosslinked membranes presented the highest organic solute rejections for produced water of 69%. Moreover, long term pervaporation testing was done for the Zn2+-rGO membrane for 12 h, and only a minor drop of 6% in permeation flux was observed, while Zn2+-GO had a drop of 24%. Both modifiers significantly enhanced the stability with Fe3+-rGO membranes displaying the highest mechanical abrasion resistance of 95% compared to non-reduced and non-crosslinked GO. Improved stability for all samples also led to higher selectivity to water over organic contaminants and only slightly reduced water flux across the membrane.

Plasmonic effect of metal nanoparticles on the photocatalytic properties of TiO2/rGO composite.

A comparative study of the plasmon effect of Ag and Au nanoparticles on TiO2/rGO nanocomposite was carried out. The synthesis of Au and Ag nanoparticles was carried out by laser ablation. The morphology and structure of the nanocomposites were studied by EDA, HRTEM, XRD and Raman spectroscopy. It was shown that the absorption capacity of the nanocomposite material was increased in the visible range of the spectrum when Ag and Au nanoparticles were added to TiO2/rGO. This leads to an increase in their photocatalytic activity. The photocurrent generated by NC/Au 10-11films is in 3.8 times and NC/Ag 10-12is in 2 times higher compared to pure TiO2/rGO film. Similar results were obtained from experimental data on the dyes photodegradation. In the presence of plasmon nanoparticles a significant enhancement in the electrical properties of the TiO2/rGO nanocomposite was recorded. The charge carrier transfer resistance in nanocomposites was decreased by almost ∼7 times for NC/Au,10-11and ∼4 times for NC/Ag,10-12films compared to pure TiO2/rGO. In addition, for nanocomposites with Ag or Au nanoparticles, a decrease in the effective electron lifetime was observed. The data obtained allow us to conclude that plasmonic NPs have a synergistic effect in TiO2/rGO nanocomposites, which consists in modifying both their light-harvesting properties and charge-transport characteristics. The results obtained can be used for the design of materials with improved photocatalytic and optoelectronic characteristics.

Flower like-novel nanocomposite of Mg(Ti0.99Sn0.01)O3decorated on reduced graphene oxide (rGO) with high capacitive behavior as supercapacitor electrodes.

In this study, ceramic materials of Mg(Ti0.99Sn0.01)O3were synthesized and decorated on reduced graphene oxide, forming a nanocomposite of rGO/Mg(Ti0.99Sn0.01)O3(rGO/MTS001). The successful synthesis results were confirmed by XRD, UV-vis analysis, FT-IR, and SEM-EDS. The MTS001 has a flower-like morphology from scanning electron microscopy (SEM) analysis, and the nanocomposites of rGO/MTS001 showed MTS001 particles decorated on the rGO's surface. The electrochemical performance of rGO/MTS001 and MTS001 was investigated by determining the specific capacitance obtained in 1 M H2SO4solution by cyclic voltammetry, followed by galvanostatic charge-discharge analysis using a three-electrode setup. The rGO/MTS001 achieved a specific capacitance of 361.97 F g‒1, compared to MTS001 (194.90 F g‒1). The capacitance retention of rGO/MTS001 nanocomposite also depicted excellent cyclic stability of 95.72% after 5000 cycles at a current density of 0.1 A g‒1. The result showed that the nanocomposite of ceramics with graphene materials has a potential for high-performance supercapacitor electrodes.

Quantification of the Contribution of Heterogeneous Surface Processes to Pollutant Abatement during Heterogeneous Catalytic Ozonation.

Heterogeneous surface processes such as adsorption and oxidation with surface-adsorbed reactive oxygen species (ROSad, e.g., adsorbed oxygen atom (*Oad) and hydroxyl radicals (•OHad)) have been suggested to play an important role in pollutant abatement during heterogeneous catalytic ozonation (HCO). However, to date, there is no reliable method to quantitatively evaluate the contribution of heterogeneous surface processes to pollutant abatement (fS) during HCO. In this study, we developed a method by combining probe compound-based experiments with kinetic modeling to distinguish heterogeneous surface processes from homogeneous bulk reactions with aqueous O3 and ROS (•OH and superoxide radicals (O2•-) in the abatement of various pollutants (e.g., atrazine, ibuprofen, tetrachloroethylene, and perfluorooctanoic acid) during HCO with reduced graphene oxide. The results show that the pollutants that have a low affinity for the rGO surface (e.g., ibuprofen and tetrachloroethylene) were essentially abated by homogeneous bulk reactions, while the contribution of heterogeneous surface processes was negligible (fS < 5%). In contrast, heterogeneous surface processes played an important or even dominant role in the abatement of pollutants that have a high surface affinity (e.g., fS = 32-82% for atrazine and perfluorooctanoic acid). This study is a critical first step in quantitatively evaluating the role of heterogeneous surface processes for pollutant abatement during HCO, which is crucial to understanding the mechanism of HCO and designing catalysts for effective pollutant abatement.