Bioflocculation of pollutants in wastewater using flocculant derived from Providencia huaxiensis OR794369.1.

BACKGROUND: Water pollution has become a major environmental and health concern due to increasing population and industrialisation. Microbial flocculants are promising agents for treatment of contaminated water owing to their effectiveness, eco-friendliness, and high biosafety levels. In this study, culture conditions of Providencia huaxiensis OR794369.1 were optimised and its bioflocculant was extracted, characterised and used to treat wastewater. RESULTS: The maximum flocculating activity of 92% and yield of 3.5 g/L were obtained when cultivation conditions were: 3% inoculum size, starch, casein, initial pH of 6, cultivation temperature of 30 oC and 72 h of fermentation. The bioflocculant is an amorphous glycoprotein biomolecule with 37.5% carbohydrates, 27.9% protein, and 34.6% uronic acids. It is composed of hydroxyl, amino, alkanes, carboxylic acid and amines groups as its main functional structures. It was found to be safe to use as it demonstrated non-cytotoxic effects on bovine dermis and African green monkey kidney cells, illustrating median inhibitory concentration (IC50) values of 180 and > 500 µg/mL on both cell lines, respectively. It demonstrated the removal efficiencies of 90% on chemical oxygen demand (COD), 97% on biological oxygen demand (BOD) and 72% on Sulphur on coal mine wastewater. It also revealed the reduction efficacies of 98% (COD) and 92% (BOD) and 70% on Sulphur on domestic wastewater. CONCLUSION: The bioflocculant was effective in reducing pollutants and thus, illustrated potential to be used in wastewater treatment process as an alternative.

Wetlands as a potential multifunctioning tool to mitigate eutrophication and brownification.

Eutrophication and brownification are ongoing environmental problems affecting aquatic ecosystems. Due to anthropogenic changes, increasing amounts of organic and inorganic compounds are entering aquatic systems from surrounding catchment areas, increasing both nutrients, total organic carbon (TOC), and water color with societal, as well as ecological consequences. Several studies have focused on the ability of wetlands to reduce nutrients, whereas data on their potential to reduce TOC and water color are scarce. Here we evaluate wetlands as a potential multifunctional tool for mitigating both eutrophication and brownification. Therefore, we performed a study for 18 months in nine wetlands allowing us to estimate the reduction in concentrations of total nitrogen (TN), total phosphorus (TP), TOC and water color. We show that wetland reduction efficiency with respect to these variables was generally higher during summer, but many of the wetlands were also efficient during winter. We also show that some, but not all, wetlands have the potential to reduce TOC, water color and nutrients simultaneously. However, the generalist wetlands that reduced all four parameters were less efficient in reducing each of them than the specialist wetlands that only reduced one or two parameters. In a broader context, generalist wetlands have the potential to function as multifunctional tools to mitigate both eutrophication and brownification of aquatic systems. However, further research is needed to assess the design of the generalist wetlands and to investigate the potential of using several specialist wetlands in the same catchment.

Evaluating the performance of electrocoagulation system in the removal of polystyrene microplastics from water.

Emerging pollutants, particularly microplastics, present a significant threat to both the environment and human health. Traditional treatment methods lack targeted strategies for their removal. This study thoroughly investigated the efficacy of electrocoagulation as a method for efficiently extracting microplastics from water. Various critical operational parameters, including electrode combinations, pH levels, electrolyte concentrations, electrode geometries, configurations, current intensities, and reaction times, were systematically examined. The study systematically examined the impact of different combinations of aluminium (Al) and stainless steel (SS) electrodes, including Al-Al, SS-SS, Al-SS, and SS-Al. Among these combinations, it was found that the Al-Al pairing exhibited outstanding efficiency in microplastic removal, while simultaneously minimizing energy consumption. Initial pH emerged as a critical parameter, with a neutral pH of 7 demonstrating the highest removal efficiency. In the pursuit of optimizing parameters like electrolyte concentrations, electrode geometry, and configuration, it's noteworthy that consistently achieving removal efficiencies exceeding 90% has been a significant achievement. However, to ascertain economic efficiency, additional factors such as energy consumption, electrode usage, and post-treatment conductivity must be taken into account. To tackle the complexity posed by various parameters and criteria, using multi-criteria decision-making tools like TOPSIS is essential, as it has a track record of effectiveness in practical applications. The electrolyte concentration of 0.5 g L-1 is identified as optimal by TOPSIS analysis Additionally, the TOPSIS highlighted the superiority of cylindrical hollow wire mesh electrodes and established the monopolar parallel configuration as the most effective electrode connection method. The investigation carefully evaluated the effect of reaction time, determining that a 50-min window provides optimal microplastic removal efficiency. This refined system exhibited remarkable proficiency in eliminating microplastics of varying size ranges (0-75 µm, 75-150 µm, and 150-300 µm), achieving removal efficiencies of 90.67%, 93.6%, and 94.6%, respectively, at input concentration of 0.2 g L-1. The present study offers a comprehensive framework for optimizing electrocoagulation parameters, presenting a practical and highly effective strategy to address the critical issue of microplastic contamination in aquatic environments.

Ceftiofur in swine manure contributes to reducing pathogens and antibiotic resistance genes during composting.

Aerobic composting is a common way for the disposal of feces produced in animal husbandry, and can reduce the release of antibiotic resistance genes (ARGs) from feces into the environment. In this study, we collected samples from two distinct treatments of swine manure compost with and without ceftiofur (CEF), and identified the ARGs, mobile genetic elements (MGEs), and bacterial community by metagenomic sequencing. The impacts of CEF on the bacterial community composition and fate of ARGs and MGEs were investigated. With increasing composting temperature and pH, the concentration of CEF in the manure decreased rapidly, with a degradation half-life of 1.12 d and a 100% removal rate after 10 d of aerobic composting. Metagenomics demonstrated that CEF in the manure might inhibit the growth of Firmicutes and Proteobacteria, thereby reducing some ARGs and MGEs hosted by these two bacteria, which was further confirmed by the variations of ARGs and MGEs. A further redundancy analysis suggested that pH and temperature are key environmental factors affecting ARG removal during composting, and intI1 and bacterial communities also have significant influence on ARG abundance. These results are of great significance for promoting the removal of some ARGs from animal manure by controlling some key environmental factors and the type of antibiotics used in animals.

Evaluation of pharmaceutical consumption between urban and suburban catchments in China by wastewater-based epidemiology.

Wastewater-based epidemiology (WBE) is amply used for estimating human consumption of chemicals, yet information on regional variation of pharmaceuticals and their environmental fate are scarce. Thus, this study aims to estimate the consumption of three cardiovascular, four non-steroidal anti-inflammatory pharmaceuticals (NSAIDs), and four psychoactive pharmaceuticals between urban and suburban catchments in China by WBE, and to explore their removal efficiencies and ecological risks. Eleven analytes were detected in both influent and effluent samples. The estimated consumptions ranged from

A soft-sensor approach for predicting an indicator virus removal efficiency of a pilot-scale anaerobic membrane bioreactor (AnMBR).

The anaerobic membrane bioreactor (AnMBR) is a promising technology for not only water reclamation but also virus removal; however, the virus removal efficiency of AnMBR has not been fully investigated. Additionally, the removal efficiency estimation requires datasets of virus concentration in influent and effluent, but its monitoring is not easy to perform for practical operation because the virus quantification process is generally time-consuming and requires specialized equipment and trained personnel. Therefore, in this study, we aimed to identify the key, monitorable variables in AnMBR and establish the data-driven models using the selected variables to predict virus removal efficiency. We monitored operational and environmental conditions of AnMBR in Sendai, Japan and measured virus concentration once a week for six months. Spearman's rank correlation analysis revealed that the pH values of influent and mixed liquor suspended solids (MLSS) were strongly correlated with the log reduction value of pepper mild mottle virus, indicating that electrostatic interactions played a dominant role in AnMBR virus removal. Among the candidate models, the random forest model using selected variables including influent and MLSS pH outperformed the others. This study has demonstrated the potential of AnMBR as a viable option for municipal wastewater reclamation with high microbial safety.

Evaluation of kikuyu grass wetland for wastewater treatment efficiency from malt factory, Ethiopia.

BACKGROUND: The majority of existing industries in Ethiopia discharge untreated effluents into nearby water bodies, streams and open land. The wastewater generated by Gondar malt factory (GMF) was disposed freely and join a natural wetland implemented for the treatment of the wastewater. The objective of the study was to analyze and characterize wastewater from GMF and to evaluate the effectiveness of the wetland for the treatment purpose. METHODS: Different Physicochemical quality indicators (color, turbidity pH, temperature, Total Dissolved solids, Total Suspended solids, total solid, conductivity, alkalinity, hardness, nitrate, phosphate, sulfate, free chlorides, heavy metals-(Cd, Cr, Fe, Mn, and Pb)and Biological Oxygen Demand were measured according to the standard procedures. Data was analyzed using Statistical Package for Social Sciences (SPSS-25). Analysis of Variance (ANOVA) was used to find whether significant differences existed in the different sampling stations for the parameters studied. P value less than 0.05 was considered to show significant difference. RESULTS: The results of this study revealed that most of the quality indicators were improved in value after the water passed through the wetland except for alkalinity M, sulfite, Mn, temperature and pH. From ANOVA result, it was noted that there was a significant mean difference between the stations except for chromium, manganese and lead. The result showed that the wetland plays a great role in the removal of pollutants where the best performance was obtained at removal efficiency of 96.188% PO4HR,75.63% Nitrate,>99% Cl2, ammonia and nitrite 99.99%, 92.77% sulfate,84.36% Total hardness,87.43% color, and for others it is ranged between 30 and 60%. CONCLUSION: the study concluded that GMF wetland was almost effective and had potential in treatment of the wastewater from the discharging facilities (especially for nutrients, alkalinity P, hardness, color and chloride). It is recommended that wetlands should be conserved and used as wastewater treatment facility.

Effect of biopolymer chitosan on manganese immobilization improvement by microbial­induced carbonate precipitation.

Microbially induced carbonate precipitation (MICP), as an eco-friendly and promising technology that can transform free metal ions into stable precipitation, has been extensively used in remediation of heavy metal contamination. However, its depressed efficiency of heavy metal elimination remains in question due to the inhibition effect of heavy metal toxicity on bacterial activity. In this work, an efficient, low-cost manganese (Mn) elimination strategy by coupling MICP with chitosan biopolymer as an additive with reduced treatment time was suggested, optimized, and implemented. The influences of chitosan at different concentrations (0.01, 0.05, 0.10, 0.15 and 0.30 %, w/v) on bacterial growth, enzyme activity, Mn removal efficiency and microstructure properties of the resulting precipitation were investigated. Results showed that Mn content was reduced by 94.5 % within 12 h with 0.15 % chitosan addition through adsorption and biomineralization as MnCO3 (at an initial Mn concentration of 3 mM), demonstrating a two-thirds decrease in remediation time compared to the chitosan-absent system, whereas maximum urease activity increased by ∼50 %. Microstructure analyses indicated that the mineralized precipitates were spherical-shaped MnCO3, and a smaller size and more uniform distribution of MnCO3 is obtained by the regulation of abundant amino and hydroxyl groups in chitosan. These results demonstrate that chitosan accelerates nucleation and tunes the growth of MnCO3 by providing nucleation sites for mineral formation and alleviating the toxicity of metal ions, which has the potential to upgrade MICP process in a sustainable and effective manner. This work provides a reference for further understanding of the biomineralization regulation mechanism, and gives a new perspective into the application of biopolymer-intensified strategies of MICP technology in heavy metal contamination.

The fate of severe acute respiratory syndrome coronavirus-2 and pepper mild mottle virus at various stages of wastewater treatment process.

This study investigated the efficiency of the treatment processes of wastewater treatment plants (WWTPs) to remove severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and pepper mild mottle virus (PMMoV) from the wastewater and sewage sludge, as well as the influence of the mode of operation on the quality of the treated wastewater. SARS-CoV-2 and PMMoV were detected and quantified at different stages of the wastewater and sludge treatment process of three major WWTPs in Stockholm, Sweden. The results showed that primary, biological, and advanced membrane treatment processes are effective in removing SARS-CoV-2 from the wastewater with removal efficiencies of 99-100 % for all WWTPs, while the virus was accumulated in the primary and waste-activated sludges due to higher affinity to biosolids. Operation strategies such as bypass reintroduced the virus into the treated wastewater. The WWTPs achieved relatively low PMMoV removal efficiencies (63-87 %) most probably due to the robust capsid structure of the virus. Anaerobic digestion could not completely remove SARS-CoV-2 and PMMoV from the sludge leading to increased levels of SARS-CoV-2 and PMMoV in dewatered sludge. The study gives an overview of WWTPs' role in tackling pathogen spread in society in the event of a pandemic and disease breakout.

Assessment of sulfamethoxazole removal by three wetland plant species under hydroponic conditions: uptake, accumulation, and physiological responses.

Plants play a crucial role as a removal pathway in constructed wetlands, demonstrating the ability to absorb and tolerate antibiotics from wastewater. However, the specific contribution of plants in this regard has not yet to be sufficiently established. To gain a more comprehensive insight into the associated processes, we selected three common wetland plant species, Canna indica L. (C. indica), Cyperus alternifolius L. (C. alternifolius), and Thalia dealbata Fraser (T. dealbata), to evaluate their capacity for uptake, accumulation, and physiological response in the removal of sulfamethoxazole (SMX) at varying initial concentrations (10, 30, 100, and 300 µg/L) under hydroponic conditions. The results showed that SMX removal was more efficient at lower concentrations (10 and 30 µg/L) than at higher concentrations (100 and 300 µg/L). Moreover, plant systems were found to consistently outperform unplanted systems in SMX removal. Among the assessed species, C. indica was identified as being relatively effective in the removal of SMX, whereas the performance of C. alternifolius was notably less pronounced. A positive correlation was observed between the concentration of SMX in the plant tissues and that in the external aqueous medium. However, plant tissue residues contributed only a minor fraction to the overall removal of SMX. Wetland plants absorb SMX through their roots, and we accordingly detected significantly higher concentrations in submerged plant tissues. Furthermore, we also detected reductions in net photosynthetic rates indicative of potential phytotoxicity, which is associated with the accumulation of antibiotic in the shoot tissues. Accumulation of SMX in the roots and rhizomes was also found to be associated with the development of shorter roots, with this effect becoming more pronounced with an increase in the concentration of exogenous SMX. However, despite these adverse effects, plants can detoxify antibiotics via the glutathione pathway. Of the assessed plant species, C. indica was identified as the most SMX tolerant, as indicated by Km and Vmax values, with C. alternifolius being the least tolerant. Our findings in this study reveal the potential value of wetland plants in the sequestration of antibiotics and provide evidence for the underlying mechanisms of action. These findings could make an important contribution to the implementation of phytoremediation in antibiotic-contaminated water.

Three wetland plants with fibrous root systems, namely Canna indica, Cyperus alterniflius, and Thalia dealbata, were selected to investigate the removal efficiencies of sulfamethoxazole in the hydroponic system by different emergent plants, quantify the contribution of uptake and accumulation for sulfamethoxazole in plant tissues, and assess the physiological responses of plants and their effect on the removal of sulfamethoxazole. The knowledge obtained from this study shows the potential use of wetland plants for removing antibiotics and the inherent mechanisms, which will be useful for the application of phytoremediation in antibiotic contaminated water.

Performance of vertical flow constructed wetland for the treatment of effluent from a brassware industry in city of Fez, Morocco: a laboratory scale study.

Brassware industry constitutes the second most polluting industrial sector in Fez city, Morocco, owing to its high heavy metal load. The aim of this study is to examine and evaluate the performance of vertical flow constructed wetlands in treating brassware effluents using various plant species. Ten treatment systems were planted with four types of plants: Chrysopogon zizanioides, Typha latifolia, Phragmites australis, and Vitex agnus-castus, while another system remained unplanted. These systems underwent evaluation by measuring various parameters, including pH, electrical conductivity, suspended solids, chemical oxygen demand, biological oxygen demand, sulfates, orthophosphates, total Kjeldhal nitrogen, ammonium, nitrates, nitrites, and heavy metals such as silver, copper, and nickel, using standard methods over of ten weeks. The results obtained demonstrate effectiveness of these systems. When planted with Ch. zizanioides, the systems achieved elimination rates of 83.64%, 98.55%, 91.48%, 86.82%, 80.31%, 96.54%, 98%, and 98.82% for suspended solids, ammonium, nitrites, BOD5, sulfates, orthophosphates, silver, and nickel, respectively. System with V. agnus-castus showed significant reductions in nitrate and copper, with rates of 84.48% and 99.10%, respectively. Considerable decrease in pH and electrical conductivity values was observed in all systems, with a notable difference between planted and control systems regarding effectiveness of treatment for other parameters.

The novelty of this study lies in the application of constructed wetlands for the treatment of brassware effluents in the city of Fez, Morocco. Consequently, a comparison was conducted to assess the removal efficiency of Chrysopogon zizanioides (L.) Roberty and Vitex agnus-castus L., in comparison to Typha latifolia L. and Phragmites australis (Cav.) Trin. These four plant species were specifically chosen for their high elimination capacity and resistance to the toxicity of the pollutants. Notably, this study represents an unexplored aspect in the existing literature. Nevertheless, T. latifolia and P. australis have been extensively utilized in constructed wetlands for treating diverse wastewaters. The findings from this study can also be extrapolated to pilot-scale constructed wetlands, offering valuable insights for the removal of pollutants from brassware wastewater.

Intensive Treatment of Organic Wastewater by Three-Dimensional Electrode System within Mn-Loaded Steel Slag as Catalytic Particle Electrodes.

Developing a green, low-carbon, and circular economic system is the key to achieving carbon neutrality. This study investigated the organics removal efficiency in a three-dimensional electrode reactor (3DER) constructed from repurposed industrial solid waste, i.e., Mn-loaded steel slag, as the catalytic particle electrodes (CPE). The CPE, a micron-grade material consisting primarily of transition metals, including Fe and Mn, exhibited excellent electric conductivity, catalytic ability, and recyclability. High rhodamine B (RhB) removal efficiency in the 3DER was observed through a physical modelling experiment. The optimal operating condition was determined through a single-factor experiment in which 5.0 g·L-1 CPE and 3 mM peroxymonosulfate (PMS) were added to a 200 mL solution of 10 mM RhB under a current intensity of 0.5 A and a 1.5 to 2.0 cm distance between the 2D electrodes. When the initial pH value of the simulated solution was 3 to 9, the RhB removal rate exceeded 96% after 20 min reaction. In addition, the main reactive oxidation species in the 3DER were determined. The results illustrated that HO• and SO4•- both existed, but that the contribution of SO4•- to RhB removal was much lower than that of HO• in the 3DER. In summary, this research provides information on the potential of the 3DER for removing refractory organics from water.

Evaluation on the performance of a swirling-type hydrodynamic separator using physical and numerical models.

Hydrodynamic separators are commonly used to control the total suspended solid concentration in stormwater before being discharged to natural water bodies. The separator studied in this paper, featuring a swirling flow generated by tangential inlet and outlet connections, was analyzed for its sediment removal efficiency in relation to sediment and flow rates. For the separator studied in this paper, the numerical model showed that the flow field was favorable for the sediments to gather at the center and settle. A higher flow rate or a smaller sediment diameter corresponded to a lower removal rate and vice versa. The dimension improvement for increasing the sediment removal rate was also studied. It was found that increasing the diameter of the separator showed a higher sediment removal rate compared with corresponding increase in the height of the separator. A dimensionless parameter J was proposed to assess the sediment removal rate of a separator, which may be used for designing and optimizing such a device. The removal rate is positively correlated with the J value. When the J value reaches 0.5 or above, the sediment removal rate exceeds 80%, which is a good initial target value for designing this type of separator.

A review of microplastics in wastewater treatment plants in Türkiye: Characteristics, removal efficiency, mitigation strategies for microplastic pollution and future perspective.

The effluent of WWTPs is an important source of microplastics (MP) for the aquatic environment. In this review study, MPs in wastewater treatment plants (WWTP) in Türkiye and their removal from WWTPs are reviewed for the first time. First, MP characteristics in the influent and effluent of WWTPs in Türkiye are discussed. In the next section, the abundance of MPs in the influent and effluent of WWTPs in Türkiye and the MP removal efficiency of WWTPs in Türkiye are evaluated. Then, the results of studies on MP abundance and characteristics in Türkiye's aquatic environments are presented and suggestions are made to reduce MPs released from WWTPs into the receiving environments. Strategies for reducing MPs released to the receiving environment from WWTPs of Türkiye are summarized. In the last section, research gaps regarding MPs in WWTPs in Türkiye are identified and suggestions are made for future studies. This review paper provides a comprehensive assessment of the abundance, dominant characteristics, and removal of MPs in WWTPs in Türkiye, as well as the current status and deficiencies in Türkiye. Therefore, this review can serve as a scientific guide to improve the MP removal efficiency of WWTPs in Türkiye.

Pollutant removal efficiency of bare and planted rain gardens with diverse planting mixtures.

This study examines the influence of planting mixture variations on the quality of the percolated water of the rain garden with and without plants. Six planting mixtures in experimental rain gardens have been used. It has been noted that pollutant removal efficiency of RG can exhibit variations based on specific parameters. Notably, RG6, utilizing a planting mix of 75% topsoil and 25% compost, demonstrated the highest performance. These results draw attention to the critical role of the specific planting mixtures in influencing the performance of vital parameters related to pollutant removal. The observation shows that RG5 exhibits exceptional removal efficiency in pH, Total Suspended Solids (TSS), Biological Oxygen Demand (BOD), and Chemical Oxygen Demand (COD), and RG6 performs best in electrical conductivity (EC), Total Dissolved Solids (TDS), Total Nitrogen (TN), and Total Phosphorus (TP) removal. In particular, when analyzing pollutant removal on a surface with Madagascar periwinkle plants, RG6 emerges as the most effective, achieving an impressive efficiency of approximately 49%. For the bare surface, pollutant removal efficiency is 40%. The study outcome will be useful in deciding the composition of the planting mixture, which will keep the rain garden to improve quality and quantitatively hydrological performance, lowering urban flooding magnitude.

Optimization, kinetics, and pathways of pharmaceutical pollutant degradation using solar Fenton technique.

Solar Fenton is an important and extensively used advanced oxidation process (AOP) to degrade pharmaceutical pollutants. The objective of this study was to evaluate the performance of simultaneous degradation of the mixed pollutants (amoxicillin, acetaminophen, and ciprofloxacin) for an aqueous solution using the solar Fenton process. Operating parameters such as pH, iron doses, H2O2 doses, pollutant concentrations, and time were studied. From the experimental results, the ideal conditions were obtained for the removal of mixed pollutants such as pH 3, Fe2+ 0.04 mM, H2O2 4 mM, the concentration of the mixed pollutants 5 mg/L, solar radiation 400 W/m2, and time 10 min, respectively. The pseudo-first-order kinetics were utilized to investigate the degradation efficacy of the mixed pollutants. The result of the study indicates that the degradation efficiency was > 99% for the mixed pollutants. A maximum of 63% mineralization was observed, and hydroxyl radical scavenger effects were studied. The best optimal conditions were applied to assess the spiked wastewater (municipal wastewater (MWW) and hospital wastewater (HWW)). The highest elimination rates for AMX, ACET, and CIP were observed as 65%, 89%, and 85% for MWW and 76%, 92%, and 80% for HWW, respectively. The degraded by-products were detected by LC-ESI-MS in the water matrix (aqueous solution and spiked wastewater), and ECOSAR analysis was performed for the transformed products. The study concluded that the solar Fenton technique is promising and effective for the removal of mixed pollutants from the water matrix.

Nontarget Screening and Fate of Emerging Per- and Polyfluoroalkyl Substances in Wastewater Treatment Plants in Tianjin, China.

Wastewater treatment plants (WWTPs) are typical point sources of per- and polyfluoroalkyl substances (PFAS) released into the environment. The suspect and nontarget screening based on gas chromatography or liquid chromatography-high resolution mass spectrometry were performed on atmosphere, wastewater, and sludge samples collected from two WWTPs in Tianjin to discover emerging PFAS and their fate in this study. A total of 40 PFAS (14 neutral and 26 ionic) and 64 PFAS were identified in the atmosphere and wastewater/sludge, respectively, among which 5 short-chain perfluoroalkyl sulfonamide derivatives, 4 ionic PFAS, and 15 aqueous film-forming foam-related cationic or zwitterionic PFAS have rarely or never been reported in WWTPs in China. Active air sampling is more conducive to the enrichment of emerging PFAS, while passive sampling is inclined to leave out some ultrashort-chain PFAS or unstable transformation intermediates. Moreover, most precursors and intermediates could be enriched in the atmosphere at night, while the PFAS associated with aerosols with high water content or particles enter the atmosphere easily during the day. Although most emerging PFAS could not be eliminated efficiently in conventional treatment units, deep bed filtration and advanced oxidation processes could partly remove some emerging precursors.

Occurrence and Fate of Substituted p-Phenylenediamine-Derived Quinones in Hong Kong Wastewater Treatment Plants.

para-Phenylenediamine quinones (PPD-Qs) are a newly discovered class of transformation products derived from para-phenylenediamine (PPD) antioxidants. These compounds are prevalent in runoff, roadside soil, and particulate matter. One compound among these, N-1,3-dimethylbutyl-n'-phenyl-p-phenylenediamine quinone (6PPD-Q), was found to induce acute mortality of coho salmon, rainbow trout, and brook trout, with the median lethal concentrations even lower than its appearance in the surface and receiving water system. However, there was limited knowledge about the occurrence and fate of these emerging environmental contaminants in wastewater treatment plants (WWTPs), which is crucial for effective pollutant removal via municipal wastewater networks. In the current study, we performed a comprehensive investigation of a suite of PPD-Qs along with their parent compounds across the influent, effluent, and biosolids during each processing unit in four typical WWTPs in Hong Kong. The total concentrations of PPDs and PPD-Qs in the influent were determined to be 2.7-90 and 14-830 ng/L. In the effluent, their concentrations decreased to 0.59-40 and 2.8-140 ng/L, respectively. The median removal efficiency for PPD-Qs varied between 53.0 and 91.0% across the WWTPs, indicating that a considerable proportion of these contaminants may not be fully eliminated through the current processing technology. Mass flow analyses revealed that relatively higher levels of PPD-Qs were retained in the sewage sludge (20.0%) rather than in the wastewater (16.9%). In comparison to PPDs, PPD-Qs with higher half-lives exhibited higher release levels via effluent wastewater, which raises particular concerns about their environmental consequences to aquatic ecosystems.

Simulation and experimental study on the degradation of the greenhouse gas SF6 by thermal plasma.

SF6 gas is widely used on many occasions especially in the power equipment, but it has been restricted since Kyoto Protocol as the strongest greenhouse gas. To reduce the SF6 emission, several methods are now used such the recycling & purification and the SF6 degradation. Considering the huge market of SF6 and the recent demand in the field of power equipment, it is necessary to explore new ways to thoroughly destroy SF6. This work brought out the idea to degrade retired SF6 by thermal plasma. A simplified kinetic model was established to predict the feasibility of this idea as well as the degradation products of SF6, and then the prototype of SF6 degradation by thermal plasma was built and tested. In thermal plasma, SF6 gradually decomposed into atoms, and then H2 was added to capture the released F atoms to generate HF and also prevent the association reactions of SF6. In order to achieve the desired degradation effect, the reaction temperature and the mixing ratio of H2 should be sufficiently high. However, excessive H2 could generate the H2S, and excessive discharge power could decrease the energy yield. When the flow rate of SF6/H2 was set as 8/30 L/min and the discharge current was set as 100A, the destruction removal efficiency (DRE) of SF6 was 99.0% and the energy yield was 206 g/kWh. This work also discusses how to further treat the by-products such as HF and S from this prototype effectively.

Comparison of constructed wetland performance coupled with aeration and tubesettler for pharmaceutical compound removal from hospital wastewater.

Pharmaceutical compounds being able to alter, retard, and enhance metabolism has gained attention in recent time as emerging pollutant. However, hospitals which are part of every urban landscape have yet to gain attention in terms of its hospital wastewater treatment to inhibit pharmaceutical compounds from reaching environment. Hence this study evaluated performance of constructed wetland in combination with tubesettler and aeration based on removal efficiency and ecological risk assessment (HQ). The removal efficiency of constructed wetland with plantation was higher by 31% (paracetamol), 102% (ibuprofen), 46%, (carbamazepine), 57% (lorazepam), 54% (erythromycin), 31% (ciprofloxacin) and 20% (simvastatin) against constructed wetland without plantation. Constructed wetland with aeration efficiency increased for paracetamol, ibuprofen, carbamazepine, lorazepam, erythromycin, ciprofloxacin, and simvastatin removal efficiency were higher by 58%, 130%, 52%, 79%, 107%, 57%, and 29% respectively. In constructed wetland with plantation, removal efficiency was higher by 20% (paracetamol), 13% (ibuprofen), 4% (carbamazepine), 14% (lorazepam), 34% (erythromycin), 19% (ciprofloxacin) and 7% (simvastatin). High ecological risk was observed for algae, invertebrate and fish with hazard quotient values in range of 2.5-484, 10-631 and 1-78 respectively. This study concludes that if space is the limitation at hospitals aeration with constructed wetland can be adopted. If space is available, constructed wetland with tubesettler is suitable, economic and environmentally friendly option. Future research works can focus on evaluating other processes combination with constructed wetland.