A Room-Temperature Self-Healing Liquid Metal-Infilled Microcapsule Driven by Coaxial Flow Focusing for High-Performance Lithium-Ion Battery Anode.

Liquid metals have attracted a lot of attention as self-healing materials in many fields. However, their applications in secondary batteries are challenged by electrode failure and side reactions due to the drastic volume changes during the "liquid-solid-liquid" transition. Herein, a simple encapsulated, mass-producible method is developed to prepare room-temperature liquid metal-infilled microcapsules (LMMs) with highly conductive carbon shells as anodes for lithium-ion batteries. Due to the reasonably designed voids in the microcapsule, the liquid metal particles (LMPs) can expand freely without damaging the electrode structure. The LMMs-based anodes exhibit superior capacity of rete-performance and ultra-long cycling stability remaining 413 mAh g-1 after 5000 cycles at 5.0 A g-1. Ex situ X-ray powder diffraction (XRD) patterns and electrochemical impedance spectroscopy (EIS) reveal that the LMMs anode displays a stable alloying/de-alloying mechanism. DFT calculations validate the electronic structure and stability of the room-temperature LMMs system. These findings will bring some new opportunities to develop high-performance battery systems.

Electrodeposition of atmosphere-sensitive ternary sodium transition metal oxide films for sodium-based electrochemical energy storage.

We introduce an intermediate-temperature (350 °C) dry molten sodium hydroxide-mediated binder-free electrodeposition process to grow the previously electrochemically inaccessible air- and moisture-sensitive layered sodium transition metal oxides, NaxMO2 (M = Co, Mn, Ni, Fe), in both thin and thick film form, compounds which are conventionally synthesized in powder form by solid-state reactions at temperatures ≥700 °C. As a key motivation for this work, several of these oxides are of interest as cathode materials for emerging sodium-ion-based electrochemical energy storage systems. Despite the low synthesis temperature and short reaction times, our electrodeposited oxides retain the key structural and electrochemical performance observed in high-temperature bulk synthesized materials. We demonstrate that tens of micrometers thick >75% dense NaxCoO2 and NaxMnO2 can be deposited in under 1 h. When used as cathodes for sodium-ion batteries, these materials exhibit near theoretical gravimetric capacities, chemical diffusion coefficients of Na+ ions (∼10-12 cm2⋅s-1), and high reversible areal capacities in the range ∼0.25 to 0.76 mA⋅h⋅cm-2, values significantly higher than those reported for binder-free sodium cathodes deposited by other techniques. The method described here resolves longstanding intrinsic challenges associated with traditional aqueous solution-based electrodeposition of ceramic oxides and opens a general solution chemistry approach for electrochemical processing of hitherto unexplored air- and moisture-sensitive high valent multinary structures with extended frameworks.

Debye Temperature Evaluation for Secondary Battery Cathode of α-SnxFe1-xOOH Nanoparticles Derived from the 57Fe- and 119Sn-Mössbauer Spectra.

Debye temperatures of α-SnxFe1-xOOH nanoparticles (x = 0, 0.05, 0.10, 0.15 and 0.20, abbreviated as Sn100x NPs) prepared by hydrothermal reaction were estimated with 57Fe- and 119Sn-Mössbauer spectra measured by varying the temperature from 20 to 300 K. Electrical properties were studied by solid-state impedance spectroscopy (SS-IS). Together, the charge-discharge capacity of Li- and Na-ion batteries containing Sn100x NPs as a cathode were evaluated. 57Fe-Mössbauer spectra of Sn10, Sn15, and Sn20 measured at 300 K showed only one doublet due to the superparamagnetic doublet, while the doublet decomposed into a sextet due to goethite at the temperature below 50 K for Sn 10, 200 K for Sn15, and 100 K for Sn20. These results suggest that Sn10, Sn15 and Sn20 had smaller particles than Sn0. On the other hand, 20 K 119Sn-Mössbauer spectra of Sn15 were composed of a paramagnetic doublet with an isomer shift (δ) of 0.24 mm s-1 and quadrupole splitting (∆) of 3.52 mm s-1. These values were larger than those of Sn10 (δ: 0.08 mm s-1, ∆: 0.00 mm s-1) and Sn20 (δ: 0.10 mm s-1, ∆: 0.00 mm s-1), suggesting that the SnIV-O chemical bond is shorter and the distortion of octahedral SnO6 is larger in Sn15 than in Sn10 and Sn20 due to the increase in the covalency and polarization of the SnIV-O chemical bond. Debye temperatures determined from 57Fe-Mössbauer spectra measured at the low temperature were 210 K, 228 K, and 250 K for Sn10, Sn15, and Sn20, while that of α-Fe2O3 was 324 K. Similarly, the Debye temperature of 199, 251, and 269 K for Sn10, Sn15, and Sn20 were estimated from the temperature-dependent 119Sn-Mössbauer spectra, which were significantly smaller than that of BaSnO3 (=658 K) and SnO2 (=382 K). These results suggest that Fe and Sn are a weakly bound lattice in goethite NPs with low crystallinity. Modification of NPs and addition of Sn has a positive effect, resulting in an increase in DC conductivity of almost 5 orders of magnitude, from a σDC value of 9.37 × 10-7 (Ω cm)-1 for pure goethite Sn (Sn0) up to DC plateau for samples containing 0.15 and 0.20 Sn (Sn15 and Sn20) with a DC value of ~4 × 10-7 (Ω cm)-1 @423 K. This non-linear conductivity pattern and levelling at a higher Sn content suggests that structural modifications have a notable impact on electron transport, which is primarily governed by the thermally activated via three-dimensional hopping of small polarons (SPH). Measurements of SIB performance, including the Sn100x cathode under a current density of 50 mA g-1, showed initial capacities of 81 and 85 mAh g-1 for Sn0 and Sn15, which were larger than the others. The large initial capacities were measured at a current density of 5 mA g-1 found at 170 and 182 mAh g-1 for Sn15 and Sn20, respectively. It is concluded that tin-goethite NPs are an excellent material for a secondary battery cathode and that Sn15 is the best cathode among the studied Sn100x NPs.

A novel free-standing metal organic frameworks-derived cobalt sulfide polyhedron array for shuttle effect suppressive lithium-sulfur batteries.

Metal-organic-frameworks-derived nanostructures have received broad attention for secondary batteries. However, many strategies focus on the preparation of dispersive materials, which need complicated steps and some additives for making electrodes of batteries. Here, we develop a novel free-standing Co9S8polyhedron array derived from ZIF-67, which grows on a three-dimensional carbon cloth for lithium-sulfur (Li-S) battery. The polar Co9S8provides strong chemical binding to immobilize polysulfides, which enables efficiently suppressing of the shuttle effect. The free-standing S@Co9S8polyhedron array-based cathode exhibits ultrahigh capacity of 1079 mAh g-1after cycling 100 times at 0.1 C, and long cycling life of 500 cycles at 1 C, recoverable rate-performance and good temperature tolerance. Furthermore, the adsorption energies towards polysulfides are investigated by using density functional theory calculations, which display a strong binding with polysulfides.

Synthesis of Uniquely Structured Yolk-Shell Metal Oxide Microspheres Filled with Nitrogen-Doped Graphitic Carbon with Excellent Li-Ion Storage Performance.

Novel structured composite microspheres of metal oxide and nitrogen-doped graphitic carbon (NGC) have been developed as efficient anode materials for lithium-ion batteries. A new strategy is first applied to a one-pot preparation of composite (FeOx -NGC/Y) microspheres via spray pyrolysis. The FeOx -NGC/Y composite microspheres have a yolk-shell structure based on the iron oxide material. The void space of the yolk-shell microsphere is filled with NGC. Dicyandiamide additive plays a key role in the formation of the FeOx -NGC/Y composite microspheres by inducing Ostwald ripening to form a yolk-shell structure based on the iron oxide material. The FeOx -NGC/Y composite microspheres with the mixed crystal structure of rock salt FeO and spinel Fe3 O4 phases show highly superior lithium-ion storage performances compared to the dense-structured FeOx microspheres with and without carbon material. The discharge capacities of the FeOx -NGC/Y microspheres for the 1st and 1000th cycle at 1 A g-1 are 1423 and 1071 mAh g-1 , respectively. The microspheres have a reversible discharge capacity of 598 mAh g-1 at an extremely high current density of 10 A g-1 . Furthermore, the strategy described in this study is generally applied to multicomponent metal oxide-carbon composite microspheres with yolk-shell structures based on metal oxide materials.

Carbon Materials for Lithium Sulfur Batteries-Ten Critical Questions.

Lithium-sulfur batteries are among the most promising electrochemical energy storage devices of the near future. Especially the low price and abundant availability of sulfur as the cathode material and the high theoretical capacity in comparison to state-of-the art lithium-ion technologies are attractive features. Despite significant research achievements that have been made over the last years, fundamental (electro-) chemical questions still remain unanswered. This review addresses ten crucial questions associated with lithium-sulfur batteries and critically evaluates current research with respect to them. The sulfur-carbon composite cathode is a particular focus, but its complex interplay with other hardware components in the cell, such as the electrolyte and the anode, necessitates a critical discussion of other cell components. Modern in situ characterisation methods are ideally suited to illuminate the role of each component. This article does not pretend to summarise all recently published data, but instead is a critical overview over lithium-sulfur batteries based on recent research findings.

Development of dispersive XAFS system for analysis of time-resolved spatial distribution of electrode reaction.

Apparatus for a technique based on the dispersive optics of X-ray absorption fine structure (XAFS) has been developed at beamline BL-5 of the Synchrotron Radiation Center of Ritsumeikan University. The vertical axis of the cross section of the synchrotron light is used to disperse the X-ray energy using a cylindrical polychromator and the horizontal axis is used for the spatially resolved analysis with a pixel array detector. The vertically dispersive XAFS (VDXAFS) instrument was designed to analyze the dynamic changeover of the inhomogeneous electrode reaction of secondary batteries. The line-shaped X-ray beam is transmitted through the electrode sample, and then the dispersed transmitted X-rays are detected by a two-dimensional detector. An array of XAFS spectra in the linear footprint of the transmitted X-ray on the sample is obtained with the time resolution of the repetition frequency of the detector. Sequential measurements of the space-resolved XAFS data are possible with the VDXAFS instrument. The time and spatial resolutions of the VDXAFS instrument depend on the flux density of the available X-ray beam and the size of the light source, and they were estimated as 1 s and 100 µm, respectively. The electrode reaction of the LiFePO4 lithium ion battery was analyzed during the constant current charging process and during the charging process after potential jumping.

High-power electrochemical energy storage system employing stable radical pseudocapacitors.

The development of electrical energy storage devices that can operate at high charge and discharge rates is fundamentally important, however although electrochemical capacitors (ECs) can charge and discharge at high rates, their electrochemical storage capacity remains an order of magnitude lower than that of conventional lithium-ion batteries. Novel pseudocapasitors are developed, based on the stable persilyl-susbtituted free radicals of the heavy group 14 elements, (tBu2 MeSi)3 E(.) [E=Si (1), Ge (2), and Sn (3)], as anode materials for energy storage system. Such systems showed a remarkable cycle stability without significant loss of power density, in comparison with similar characteristics of the known organic radical batteries, the dual carbon cell, and the electrochemical capacitor. Particularly important is that these novel electrochemical energy storage systems employing stable heavy group 14 element radicals are lithium-free. The electrochemical properties and structures of the reduced and oxidized species were studied by the cyclic voltammetry (CV), electron paramagnetic resonance (EPR) spectroscopy, and X-ray diffraction (XRD).

Switchable Design of Redox-Enhanced Nonaromatic Quinones Enabled by Conjugation Recovery.

An innovative switchable design strategy for modulating the electronic structures of quinones is proposed herein, leading to remarkably enhanced intrinsic redox potentials by restoring conjugated but nonaromatic backbone architectures. Computational validation of two fundamental hypotheses confirms the recovery of backbone conjugation and optimal utilization of the inductive effect in switched quinones, which affords significantly improved redox chemistry and overall performance compared to reference quinones. Geometric and electronic analyses provide strong evidence for the restored backbone conjugation and nonaromaticity in the switched quinones, while highlighting the reinforcement of the inductive effect and suppression of the resonance effect. This strategic approach facilitates the development of an exceptional quinone, viz. 2,6-naphthoquinone, with outstanding performance parameters (338.9 mAh g-1 and 912.9 mWh g-1). Furthermore, 2,6-anthraquinone with superior cyclic stability, demonstrates comparable performance (257.4 mAh g-1 and 702.8 mWh g-1). These findings offer valuable insights into the design of organic cathode materials with favorable redox chemistry in secondary batteries.

Stable interphase inducer based on montmorillonite clay mineral to enhance stability and fire safety for lithium metal batteries.

Heat buildup from factors like mechanical, electrical, or thermal stress is the main safety issue in lithium metal batteries (LMBs). Even without such stressors, however, LMBs may remain fire-prone because of the development of unstable electrode-electrolyte interphase on charge-discharge, potentially leading to internal short circuits. In this study, a stable cathode-electrolyte interphase inducer (SCEI-I) is proposed to tackle both the cycling stability issue and safety concerns. SCEI-I is synthesized by incorporating montmorillonite, a clay mineral, and methylphosphonic acid dimethyl ester, a flame-retardant material, onto a porous polyethylene film. On cycling, SCEI-I can induce a thin (<8 nm), uniform and robust cathode-electrolyte interphase layer, contributing to a steady and high Coulombic efficiency of 99.6%-99.8% with decreased impedance. SCE-I improves electrochemical performance by reducing the capacity degradation from ∼21.9% to ∼8.9% after 100 cycles. SCE-I also demonstrates strong thermal stability as the endothermic energy of SCEI-I is only -32.4 J/g (24 °C-280 °C), which is less than one-third of that of polypropylene separator (-118.9 J/g). Furthermore, when exposed to fire, the SCEI-I membrane instantly extinguished flames by disrupting combustion chain reaction. The present study proposes an interfacial engineering approach to improve the stability and safety of LMBs.

Ordered Carbonaceous Framework Synthesized from Hexaazatrinaphthylene with Enediyne Groups via Solid-State Bergman Cyclization Reaction.

Porous materials synthesized through bottom-up approaches, such as metal-organic frameworks and covalent organic frameworks, have attracted attention owing to their design flexibility for functional materials. However, achieving the chemical and thermal stability of these materials for various applications is challenging considering the reversible coordination bonds and irreversible covalent bonds in their frameworks. Thus, ordered carbonaceous frameworks (OCFs) emerge as a promising class of bottom-up materials with good periodicity, thermal and chemical stability, and electrical conductivity. However, a few OCFs have been reported owing to the limited range of precursor molecules. Herein, we designed a hexaazatrinaphthylene-based molecule with enediyne groups as a precursor molecule for synthesizing an OCF. The solid-state Bergman cyclization of enediyne groups at a low temperature formed a microporous polymer and an OCF, exhibiting redox activity and demonstrating their potential for electrochemical applications. The microporous polymer was used as an active material in sodium-ion batteries, while the OCF was used as an electrochemical capacitor. These findings illustrate the utility of the Bergman cyclization reaction for synthesizing microporous polymers and OCFs with a customizable functionality for broad applications.

Encapsulating Metal-Organic-Framework Derived Nanocages into a Microcapsule for Shuttle Effect-Suppressive Lithium-Sulfur Batteries.

Long-term stable secondary batteries are highly required. Here, we report a unique microcapsule encapsulated with metal organic frameworks (MOFs)-derived Co3O4 nanocages for a Li-S battery, which displays good lithium-storage properties. ZIF-67 dodecahedra are prepared at room temperature then converted to porous Co3O4 nanocages, which are infilled into microcapsules through a microfluidic technique. After loading sulfur, the Co3O4/S-infilled microcapsules are obtained, which display a specific capacity of 935 mAh g-1 after 200 cycles at 0.5C in Li-S batteries. A Coulombic efficiency of about 100% is achieved. The constructed Li-S battery possesses a high rate-performance during three rounds of cycling. Moreover, stable performance is verified under both high and low temperatures of 50 °C and -10 °C. Density functional theory calculations show that the Co3O4 dodecahedra display large binding energies with polysulfides, which are able to suppress shuttle effect of polysulfides and enable a stable electrochemical performance.

Optical Study of the Surface Film Formed during Li-Metal Deposition and Dissolution Investigated by Surface Plasmon Resonance Spectroscopy.

The features of the electrode surface film during Li-metal deposition and dissolution cycles are essential for understanding the mechanism of the negative electrode reaction in Li-metal battery cells. The physical and chemical property changes of the interface during the initial stages of the reaction should be investigated under operando conditions. In this study, we focused on the changes in the optical properties of the electrode surface film of the negative electrode of a Li-metal battery. Cu-based electrochemical surface plasmon resonance spectroscopy (EC-SPR) was applied because of its high sensitivity to optical phenomena on the electrode surface and its stability against Li-metal deposition. The feature of SPR reflectance dip depends on the optical properties of the electrode surface; namely, the wavelength and depth of the reflectance dip directly connected the refractive index and extinction coefficient (color of electrode surface film), which was confirmed by reflectance simulation. In the operando EC-SPR experiment, various changes in optical properties were clearly observed during the cycles. In particular, the change in the extinction coefficient was more remarkable at the second process than the first process of Li-metal deposition. By electrochemical quartz-crystal microbalance (EQCM) measurements, surface film formation was confirmed during the first Li-metal deposition process. The remarkable change in the extinction coefficient is based on the color change of the surface film, which is caused by the chemical condition change during Li-metal deposition cycles.

Charge-discharge properties of a layered-type Li(Ni,Co,Ti)O2 powder library.

A powder library of layered Li(Ni,Co,Ti)O2 (Ni ≤ 0.8, Ti ≤ 0.2) compounds was prepared by electrostatic spray deposition. From powder x-ray diffraction patterns, most of the powder library sintered at 700 ○C was indexed as a single phase belonging to the space group R[Formula: see text]m. These results were almost identical to those obtained from a study by combinatorial exploration. We investigated the charge-discharge characteristics of the Li(Ni,Co,Ti)O2 powder library in a voltage range from 4.2 to 2.8 V at 1 C and found favorable cycling properties in the LiNi x Co0.9-x Ti0.1O2 (0 ≤x ≤ 0.6) compounds.

In situ monitoring of temperature inside lithium-ion batteries by flexible micro temperature sensors.

Lithium-ion secondary batteries are commonly used in electric vehicles, smart phones, personal digital assistants (PDA), notebooks and electric cars. These lithium-ion secondary batteries must charge and discharge rapidly, causing the interior temperature to rise quickly, raising a safety issue. Over-charging results in an unstable voltage and current, causing potential safety problems, such as thermal runaways and explosions. Thus, a micro flexible temperature sensor for the in in-situ monitoring of temperature inside a lithium-ion secondary battery must be developed. In this work, flexible micro temperature sensors were integrated into a lithium-ion secondary battery using the micro-electro-mechanical systems (MEMS) process for monitoring temperature in situ.

Chloroaluminate Gel Electrolytes Prepared with Copolymers Based on Imidazolium Ionic Liquids and Deep Eutectic Solvent AlCl3:Urea.

Polymer gel electrolytes (PGEs) have been prepared with copolymers based on imidazolium ionic liquids and the deep eutectic mixture of AlCl3:urea (uralumina) as liquid electrolyte. The copolymers were synthesized by photopolymerization of vinylpirrolidone or methylmethacrylate with imidazolium bis (trifluoromethane sulfonyl) imide (TFSI) ionic liquid monomer and mixed in an increasing range of wt.% with uralumina. The rheology and electrochemical activity of PGEs were highly dependent on the molar ratio of charged groups and copolymer content. Structure of the PGEs was studied by FTIR and Raman spectroscopy and a correlation between interactions polymer/uralumina and changes in speciation of uralumina was established. Despite the low molecular weight of the copolymers, the resulting polymer electrolytes develop elastomeric character associated with the binding ionic species. Although there is room to improve the electrochemical activity, in this study these new gels provide sufficient electroactivity to make them feasible alternatives as electrolytes in secondary aluminum batteries.

TEM sample preparation of microsized LiMn2O4 powder using an ion slicer.

The main purpose of this paper is the preparation of transmission electron microscopy (TEM) samples from the microsized powders of lithium-ion secondary batteries. To avoid artefacts during TEM sample preparation, the use of ion slicer milling for thinning and maintaining the intrinsic structure is described. Argon-ion milling techniques have been widely examined to make optimal specimens, thereby making TEM analysis more reliable. In the past few years, the correction of spherical aberration (Cs) in scanning transmission electron microscopy (STEM) has been developing rapidly, which results in direct observation at an atomic level resolution not only at a high acceleration voltage but also at a deaccelerated voltage. In particular, low-kV application has markedly increased, which requires a sufficiently transparent specimen without structural distortion during the sample preparation process. In this study, sample preparation for high-resolution STEM observation is accomplished, and investigations on the crystal integrity are carried out by Cs-corrected STEM.

Development of Simultaneous Measurement System for X-ray Absorption Spectra at Two Absorption Edges.

Dispersive X-ray absorption fine structure (DXAFS) spectroscopy is a versatile measurement technique for analyzing chemical reactions in real time. We have developed a novel time-resolved DXAFS instrument based on two polychromators and a wide-range position-sensitive detector that permits direct observation of the synergistic effects of two elements. This system enables simultaneous acquisition of the X-ray absorption spectra for two different elements without any mechanical movement of the X-ray optics. The developed system was successfully applied to monitor both the synthesis of a Ni-Cu bimetallic catalyst, which revealed that the reduction of Ni occurred at a higher temperature than that of Cu, and the charge-discharge processes of a LixNi0.5Mn1.5O4-based lithium-ion battery, which demonstrated that the redox reactions of Ni and Mn occurred sequentially at specific electrode potentials.

Gas sorption porosimetry for the evaluation of hard carbons as anodes for Li- and Na-ion batteries.

Hard carbons are promising candidates for high-capacity anode materials in alkali metal-ion batteries, such as lithium- and sodium-ion batteries. High reversible capacities are often coming along with high irreversible capacity losses during the first cycles, limiting commercial viability. The trade-off to maximize the reversible capacities and simultaneously minimizing irreversible losses can be achieved by tuning the exact architecture of the subnanometric pore system inside the carbon particles. Since the characterization of small pores is nontrivial, we herein employ Kr, N2 and CO2 gas sorption porosimetry, as well as H2O vapor sorption porosimetry, to investigate eight hard carbons. Electrochemical lithium as well as sodium storage tests are compared to the obtained apparent surface areas and pore volumes. H2O, and more importantly CO2, sorption porosimetry turned out to be the preferred methods to evaluate the likelihood for excessive irreversible capacities. The methods are also useful to select the relatively most promising active materials within chemically similar materials. A quantitative relation of porosity descriptors to the obtained capacities remains a scientific challenge.

Formation of Nanocrystalline Cobalt Oxide-Decorated Graphene for Secondary Lithium-Air Battery and Its Catalytic Performance in Concentrated Alkaline Solutions.

A potent cathode catalyst of octahedral cobalt oxide (Co3O4) was synthesized onto graphene (GR) nanosheets via a two-step preparation method. The precursor cobalt solution reacted with GR during the initial hydrolysis step to form intermediates. A subsequent hydrothermal reaction promoted Co3O4 crystallinity with a crystalline size of 73 nm, resulting in octahedral particles of 100-300 nm in size. Scanning electron microscopy, Raman spectroscopy, and X-ray diffraction analysis confirmed the successful formation of the Co3O4/GR composite. This catalyst composite was sprayed onto a carbon cloth to form a cathode for the hybrid electrolyte lithium-air battery (HELAB). This catalyst demonstrated improved oxygen reduction and oxygen evolution capabilities. The HELAB containing this catalyst showed a higher discharge voltage and stable charge voltage, resulting in a 34% reduction in overall over-potential compared to that without the Co3O4/GR composite. The use of saturated LiOH in 11.6 M LiCl aqueous electrolyte at the cathode further reduced the over-potential by 0.5 V. It is proposed that the suppressed dissociation of LiOH expedites the charging reaction from un-dissociated LiOH. This Co3O4/GR composite is a promising bi-functional catalyst, suitable as a cathode material for a HELAB operating in high relative humidity and highly alkaline environment.