Vapor Phase Growth of Air-Stable Hybrid Perovskite FAPbBr3 Single-Crystalline Nanosheets.

Organic-inorganic hybrid perovskites have attracted tremendous attention owing to their fascinating optoelectronic properties. However, their poor air stability seriously hinders practical applications, which becomes more serious with thickness down to the nanoscale. Here we report a one-step vapor phase growth of HC(NH2)2PbBr3 (FAPbBr3) single-crystalline nanosheets of tunable size up to 50 µm and thickness down to 20 nm. The FAPbBr3 nanosheets demonstrate high stability for over months of exposure to air with no degradation in surface roughness and photoluminescence efficiency. Besides, the FAPbBr3 photodetectors exhibit superior overall performance as compared to previous devices based on nonlayered perovskite nanosheets, such as an ultralow dark current of 24 pA, an ultrahigh responsivity of 1033 A/W, an external quantum efficiency over 3000%, a rapid response time around 25 ms, and a high on/off ratio of 104. This work provides a strategy to tackle the challenges of hybrid perovskites toward integrated optoelectronics with requirements of nanoscale thickness, high stability, and excellent performance.

Effect of Oxidative Synthesis Conditions on the Performance of Single-Crystalline LiMn2- x Mx O4 (M = Al, Fe, and Ni) Spinel Cathodes in Lithium-Ion Batteries.

LiMn2 O4 (LMO) spinel cathode materials attract much interest due to the low price of manganese and high power density for lithium-ion batteries. However, the LMO cathodes suffer from the Mn dissolution problem at particle surfaces, which accelerates capacity fade. Herein, the authors report that the oxidative synthesis condition is a key factor in the cell performance of single-crystalline LiMn2- x Mx O4 (0.03 ≤ x ≤ 0.1, M = Al, Fe, and Ni) cathode materials prepared at 1000 °C. The use of oxygen flow during the spinel-phase formation minimizes the presence of oxygen vacancies generated at 1000 °C, thereby yielding a stoichiometrically doped LMO product; otherwise, the spinel cathode prepared in atmospheric air readily loses capacity due to the oxygen vacancies in the structure. As a way of circumventing the use of oxygen flow, a one-pot, two-step heating in air at 1000 °C and subsequently at 600 °C is used to yield the stoichiometric LMO product. The lithiation heating at 1000-600 °C resulted in a significant improvement in the cycling stability of the prepared LMO cathode in graphite-based full cells. This study on oxidative synthesis conditions also confirms the advantage of minimizing the surface area of the cathode particles.

The Coexistence of Superconductivity and Topological Order in Van der Waals InNbS2.

The research on systems with coexistence of superconductivity and nontrivial band topology has attracted widespread attention. However, the limited availability of material platforms severely hinders the research progress. Here, it reports the first experimental synthesis and measurement of high-quality single crystal van der Waals transition-metal dichalcogenide InNbS2 , revealing it as a topological nodal line semimetal with coexisting superconductivity. The temperature-dependent measurements of magnetization susceptibility and electrical transport show that InNbS2 is a type-II superconductor with a transition temperature Tc of 6 K. First-principles calculations predict multiple topological nodal ring states close to the Fermi level in the presence of spin-orbit coupling. Similar features are also observed in the as-synthesized BiNbS2 and PbNbS2 samples. This work provides new material platforms ANbS2 (A = In, Bi, and Pb) and uncovers their intriguing potential for exploring the interplay between superconductivity and band topology.

HCOO- Doping-Induced Multiexciton Emissions in Cs3Cu2I5 Crystals for Efficient X-Ray Scintillation.

Self-trapped exciton (STE) luminescence, typically associated with structural deformation of excited states, has attracted significant attention in metal halide materials recently. However, the mechanism of multiexciton STE emissions in certain metal halide crystals remains largely unexplored. This study investigates dual luminescence emissions in HCOO- doped Cs3Cu2I5 single crystals using transient and steady-state spectroscopy. The dual emissions are attributed to intrinsic STE luminescence originating from the host lattice and extrinsic STE luminescence induced by external dopants, respectively, each of which can be triggered independently at distinct energy levels. Theoretical calculations reveal that multiexciton emission originates from structural distortion of the host and dopant STEs within the 0D lattice in their respective excited states. By meticulously tuning the excitation wavelength and selectively exciting different STEs, the dynamic alteration of color change in Cs3Cu2I5:HCOO- crystals is demonstrated. Ultimately, owing to an extraordinarily high photoluminescence quantum yield (99.01%) and a diminished degree of self-absorption in Cs3Cu2I5:HCOO- crystals, they exhibit remarkable X-ray scintillation characteristics with light yield being improved by 5.4 times as compared to that of pristine Cs3Cu2I5 crystals, opening up exciting avenues for achieving low-dose X-ray detection and imaging.

Synergetic Electrostatic and Steric Effects in α-FAPbI3 Single Crystals For X-Ray Detection and Imaging.

It is still challenging to stabilize α-FAPbI3 perovskite for high performance optoelectrical devices. Herein, a novel strategy is proposed utilizing the synergetic electrostatic and steric effect to stabilize the α-FAPbI3 phase and suppress the ion migration. Dimethylamine (DMA+) cations are chosen as the dopant to fabricate FA0.96DMA0.04PbI3 single crystals (SCs). DFT calculations reveal that DMA+ cations can improve the stability of α-FAPbI3 phase in both thermodynamics (lower Gibbs free energy) and kinetics (higher defect formation and migration energy). The resulting SCs exhibit an environmental stability over 100 days and an extraordinary low dark current drift of 3.7 × 10-7 nA cm-1 s-1 V-1, comparable to 2D perovskite SCs. The X-ray detectors have also achieved the-state-of-the-art performance in X-ray detection and imaging. This work demonstrates the significance of electrostatic and steric effects in improving the phase and operational stability of perovskites.

A New Metal-Free Molecular Perovskite-Related Single Crystal with Quantum Wire Structure for High-Performance X-Ray Detection.

The family of metal-free molecular perovskites, an emerging novel class of eco-friendly semiconductor, welcomes a new member with a unique 1D hexagonal perovskite structure. Lowering dimensionality at molecular level is a facile strategy for crystal structure conversion, optoelectronic property regulation, and device performance optimization. Herein, the study reports the design, synthesis, packing structure, and photophysical properties of the 1D metal-free molecular perovskite-related single crystal, rac-3APD-NH4I3(rac-3APD= racemic-3-Aminopiperidinium), that features a quantum wire structure formed by infinite chains of face-sharing NH4I6 octahedra, enabling strong quantum confinement with strongly self-trapped excited (STE) states to give efficient warm orange emission with a photoluminescence quantum yield (PLQY) as high as ≈41.6%. The study accordingly unveils its photoexcited carrier dynamics: rac-3APD-NH4I3 relaxes to STE state with a short lifetime of 10 ps but decays to ground state by emitting photons with a relatively longer lifetime of 560 ps. Additionally, strong quantum confinement effect is conducive to charge transport along the octahedral channels that enables the co-planar single-crystal X-ray detectors to achieve a sensitivity as high as 1556 µC Gyair -1 cm-2. This work demonstrates the first case of photoluminescence mechanism and photophysical dynamics of 1D metal-free perovskite-related semiconductor, as well as the promise for high-performance X-ray detector.

Low-temperature Ruby Crystal Growth Via a Supersaturation Process Based on Flux Decomposition.

Crystal growth methods that do not require high temperatures are highly needed for the facile growth of oxide single crystals with melting points of several thousand degrees Celsius. This paper represents the first report of a method for the low-temperature growth of ruby crystals (chromium-doped Al2O3) at 750 °C, which is one-third of the conventionally required temperature (2050 °C). In solution-based crystal growth, the target crystal is grown at a temperature considerably lower than its melting point. However, conventional crystal growth processes involving solvent evaporation and cooling require high temperatures to completely liquefy the material, with previously reported solution growth temperatures of ≈1100 °C. Supersaturation based on the decomposition of crystal-solvent intermediates eliminates the need to completely liquefy the material, enabling low-temperature crystal growth. The combination of computational and experimental investigations helps determine the optimum conditions for low-temperature crystal growth. The proposed method is a novel green process that breaks the conventional frontiers of crystal growth while ensuring eco-friendliness and low energy consumption. In addition, its scope can potentially be expanded to the synthesis of various crystals and direct growth on substrates with low melting points.

Enabling Polymer Single Crystals to Be High-Performance Dielectric.

Semicrystalline polymer dielectrics (SPDs) are highly sought-after state-of-the-art dielectric materials. As the disorder in SPDs degrades their electrical properties, homogeneously ordered SPDs are desired. However, complex crystallization behaviors of polymers make such homogeneity elusive. Polymer lamellar single crystals (PLSCs), the most regularly-ordered form of SPDs possible under mild crystallizing conditions, are ideal platforms for understanding and developing high-performance dielectric materials. Here, a typical and widely used SPD, polyethylene (PE) is selected as the model material. We successfully obtained, large, uniform, and high-quality PE PLSCs and devised a non-destructive strategy to construct PE PLSC-based vertical capacitors. These nanometer-thick capacitors exhibit exceptional dielectric properties, with a high breakdown strength of 6.95 MV/cm and a low dielectric constant of 2.14±0.07, that outperform the properties of any existing neat PE. This work provides novel insights into exploring the performance possibility of ordered SPDs and reveals the PLSCs as potential high-performance dielectric materials.

Perovskite Single Crystals with Self-Cleaning Surface for Efficient Photovoltaics.

Metal halide perovskite single crystals are promising for diverse optoelectronic applications. As a universal issue of solution-grown perovskite single crystals, surface contamination causes adverse effect on material properties and device performance. Herein, learning from the self-cleaning effect of lotus leaf, we address the surface contamination issue by introducing an amphiphilic long-chain organic amine into the perovskite crystal growth solution. Self-assembly of CTAC provides a hydrophobic crystal surface, inducing spontaneous removal of residual growth solution, which results in clean surface and better optoelectronic properties of perovskite single crystals. An impressive efficiency of 23.4 % is obtained, setting a new record for FAx MA1-x PbI3 single-crystal perovskite solar cells (PSCs). Moreover, our strategy also applies to perovskite single crystals with different morphology and composition, which may contribute to improvement of other single-crystal perovskite optoelectronic devices.

Structurally Modulated Formation of Cyanine J-Aggregates with Sharp and Tunable Spectra for Multiplexed Optoacoustic and Fluorescence Bioimaging.

J-aggregation brings intriguing optical and electronic properties to molecular dyes and significantly expands their applicability across diverse domains, yet the challenge for rationally designing J-aggregating dyes persists. Herein, we developed a large number of J-aggregating dyes from scratch by progressively refining structure of a common heptamethine cyanine. J-aggregates with sharp spectral bands (full-width at half-maximum≤38 nm) are attained by introducing a branched structure featuring a benzyl and a trifluoroacetyl group at meso-position of dyes. Fine-tuning the benzyl group enables spectral regulation of J-aggregates. Analysis of single crystal data of nine dyes reveals a correlation between J-aggregation propensity and molecular arrangement within crystals. Some J-aggregates are successfully implemented in multiplexed optoacoustic and fluorescence imaging in animals. Notably, three-color multispectral optoacoustic tomography imaging with high spatiotemporal resolution is achieved, owing to the sharp and distinct absorption bands of the J-aggregates.

Ir-Doped CuPd Single-Crystalline Mesoporous Nanotetrahedrons for Ethylene Glycol Oxidation Electrocatalysis: Enhanced Selective Cleavage of C-C Bond.

The development of highly efficient electrocatalysts for complete oxidation of ethylene glycol (EG) in direct EG fuel cells is of decisive importance to hold higher energy efficiency. Despite some achievements, their progress, especially electrocatalytic selectivity to complete oxidated C1 products, is remarkably slower than expected. In this work, we developed a facile aqueous synthesis of Ir-doped CuPd single-crystalline mesoporous nanotetrahedrons (Ir-CuPd SMTs) as high-performance electrocatalyst for promoting oxidation cleavage of C-C bond in alkaline EG oxidation reaction (EGOR) electrocatalysis. The synthesis relied on precise reduction/co-nucleation and epitaxial growth of Ir, Cu and Pd precursors with cetyltrimethylammonium chloride as the mesopore-forming surfactant and extra Br- as the facet-selective agent under ambient conditions. The products featured concave nanotetrahedron morphology enclosed by well-defined (111) facets, single-crystalline and mesoporous structure radiated from the center, and uniform elemental composition without any phase separation. Ir-CuPd SMTs disclosed remarkably enhanced electrocatalytic activity and excellent stability as well as superior selectivity of C1 products for alkaline EGOR electrocatalysis. Detailed mechanism studies demonstrated that performance improvement came from structural and compositional synergies, which kinetically accelerated transports of electrons/reactants within active sites of penetrated mesopores and facilitated oxidation cleavage of high-energy-barrier C-C bond of EG for desired C1 products. More interestingly, Ir-CuPd SMTs performed well in coupled electrocatalysis of anode EGOR and cathode nitrate reduction, highlighting its high potential as bifunctional electrocatalyst in various applications.

A Metal-Free Helical Covalent Inorganic Polymer: Preparation, Crystal Structure and Optical Properties.

Helical morphologies are widely observed in nature, however, it is very challenging to prepare artificial helical polymers. Especially, precisely understanding the structure information of artificial metal-free helical covalent inorganic polymers via single-crystal X-ray diffraction (SCXRD) analysis is rarely explored. Here, we successfully prepare a novel metal-free helical covalent inorganic polymer ({[Te(C6 H5 )2 ] [PO3 (OH)]}n , named CityU-10) by introducing angular anions (HOPO3 2- ) into traditional tellurium-oxygen chains. The dynamic reversibility of the reaction is realized through the introduction of organic tellurium precursor and the slow hydrolysis of polyphosphoric acid. High-quality and large-size single crystals of CityU-10 have been successfully characterized via SCXRD, where the same-handed helical inorganic polymer chains form a pseudo-two-dimensional layer via multiple hydrogen-bonding interactions. The left-handed layers and right-handed layers alternatively stack together through weak hydrogen bonds to form a three-dimensional supramolecular structure. The single crystals of CityU-10 are found to display promising optical properties with a large birefringence. Our results would offer new guidelines for designing and preparing new crystalline covalent polymers through tellurium-based chemistry.

A Gold(I)-Acetylene Complex Synthesised using Single-Crystal Reactivity.

Using single-crystal to single-crystal solid/gas reactivity the gold(I) acetylene complex [Au(L1)(η2-HC≡CH)][BArF 4] is cleanly synthesized by addition of acetylene gas to single crystals of [Au(L1)(CO)][BArF 4] [L1=tris-2-(4,4'-di-tert-butylbiphenyl)phosphine, ArF=3,5-(CF3)2C6H3]. This simplest gold-alkyne complex has been characterized by single crystal X-ray diffraction, solution and solid-state NMR spectroscopy and periodic DFT. Bonding of HC≡CH with [Au(L1)]+ comprises both σ-donation and π-backdonation with additional dispersion interactions within the cavity-shaped phosphine.

Centimeter-Sized Piezoelectric Single Crystal of Chiral Bismuth-Based Hybrid Halide with Superior Electrostrictive Coefficient.

The lead-free hybrid perovskite piezoelectrics possess advantages of easy processing, light weight, and low-toxicity over inorganic ceramics. However, the lack of understanding in structure-property relationships hinders exploration of new molecular piezoelectric crystals with excellent performances. Herein, by introducing chiral α-phenylethylammonium (α-PEA+ ) cations into bismuth-based hybrid halides, centimeter-sized (R-α-PEA)4 Bi2 I10 and (S-α-PEA)4 Bi2 I10 single crystals with a superior piezoelectric voltage coefficient g22 of 309 mV m N-1 , are obtained. Structural rigidity in crystals leads to a remarkable electrostrictive coefficient Q22 of 25.8 m4 C-2 , nearly 20 times higher than that of poly(vinylidene fluoride) (PVDF), which is beneficial to improve piezoelectricity with the synergistic effect of chirality. Moreover, the as-grown crystals show outstanding phase stability from 173 K to ≈470 K. This work suggests a design strategy based on rigidity and chirality to exploit novel piezoelectrics among hybrid metal halides.

Thermodynamically and Kinetically Controlled Nucleation and Growth of Halide Perovskite Single Crystals.

Halide perovskites are ideal for next-generation optical devices and photovoltaics. Although perovskite single-crystals show reproducible optoelectronic properties, significant variations in the crystal size, anisotropy, density, defects, photoluminescence (PL), and carrier lifetime affect the sample properties and device performances. Homogenous size and shape FA/MAPbBr3 single microcrystals (MCs) with controlled edge lengths, crystal densities, PL lifetimes, and PL intensities are prepared by thermodynamically controlling and kinetically separating the crystal nucleation-growth processes using optimum N-cyclohexyl-2-pyrrolidone (CHP) concentration. The crystal growth kinetics at different CHP concentrations and temperatures are estimated spectroscopically by measuring the concentration of Pb (II). High-density cubic MCs with a homogenous size distribution, high PL intensities, and long PL lifetimes are obtained within minutes at high temperatures by the controlled addition of the pyrrolidone derivative. Conversely, the crystal size nonlinearly increases with time at low temperatures. The isotropically grown high-density single crystals at controlled nucleation-growth rates at 190 °C with 20% CHP show the highest PL intensity and the longest PL lifetimes. This method offers thermodynamic and kinetic control of perovskite single-crystal growth with shape control.

General Synthesis of Single-Crystal Spinel Cathodes with the Tailored Orientation of Exposed Crystal Planes for Advanced Lithium-Ion Batteries.

The spinel Mn-based cathodes with 3D Li+ diffusion channels, high voltage, and low-cost show promise for developing high-power lithium-ion batteries (LIBs). But the disproportionation and Jahn-Teller distortion lead to structural degeneration and capacity decay, especially at high working temperatures. Herein, considering the merits of single crystals and orientation of exposed crystal planes, single-crystal truncated octahedral LiMn2 O4 (TO-LMO) with exposed {111}, {100} and {110} facets is rationally designed, in which the mainly exposed {111} facets are truncated by a small portion of {100} and {110} facets. The Li-deficient intermediate phase is innovatively proposed to prepare the single-crystal TO-LMO. The synergistic effects of single crystals and the orientation of exposed crystal planes significantly reduce the disproportionation of Mn3+ ions and thereby improve their structural stability. Consequently, the cycling stability of the single-crystal TO-LMO is remarkably enhanced, obtaining outstanding capacity retention of 84.3% after 2000 cycles, much better than that of 61.2% for octahedral LiMn2 O4 . The feasibility of preparing single-crystal truncated octahedral LiNi0.5 Mn1.5 O4 with exposed {111}, {100}, and {110} facets via the Li-deficient intermediate phase is further demonstrated. These findings offer new insight into regulating the orientation of exposed crystal planes and improving the reversibility of Mn-based redox couples in LIBs.

Temperature Dependent Hydrogen Bond Toward High Emission in an Emerging Indium-Based Perovskite.

Low-dimensional organic-inorganic hybrid perovskites (OIHPs) with broadband emission attract immense scientific interest due to their potential application for the next generation of solid-state lighting. However, due to low exciton utilization, organic cations generally adjust structure rather than contribute the band edge to affect optical properties. Based on this, OIHPs are usually allowed to obtain a low photoluminescence quantum yield (PLQY). Herein, a good charge transfer carrier (p-phenylenediamine, PPDA) as organic cation is rationally employed and a novel indium-based perovskite is synthesized. By coupling with H2 O molecules, a strong interaction between organic and inorganic components is realized by hydrogen bonding, which has good transportability and greatly improves the exciton utilization. The regions of hydrogen bonding show high electron mobility, combined with the induced recombination center, improving the progress of charge relaxation. As a result, the regulation of hydrogen bond strength based on the microstructure optimization directly determines the optical emission intensity, realizing nearly 100% PLQY. Further, the polyhydrogen bond structure makes each component a stronger interaction, showing high stability in polar, organic, and acidic solvent, as well as long-term storing, which represents one of the highest overall performances for lighting in OIHPs.

Low Dimensional, Metal-Free, Hydrazinium Halide Perovskite-Related Single Crystals and Their Use as X-Ray Detectors.

Metal-free halide perovskites (MFHaPs) have garnered significant attention in recent years due to their desirable properties, such as low toxicity, light weight, chemical versatility, and potential for optoelectronics. MFHaPs with the formula A2+ B+ X-3 (where A is a large organic divalent cation, B+ is typically NH4 + , and X is a halide) have been studied extensively, but few studies have examined alternative cations at the B position. This paper reports the synthesis of three MFHaP-related single crystals, DABCO-N2 H5 -X3 (DABCO = N-N-diazabicyclo[2.2.2]octonium, X = Br and I) and (DABCO)3 -N2 H5 (NH4 )2 Cl9 , which feature hydrazinium (N2 H5 ) at the B position. The crystals have a perovskite-like, one-dimensional, edge-connected structure and exhibit optical and band structure properties. The crystals were then tested as X-ray detectors, where they showed excellent photoresponsivity, stability, and low background noise, owing to the large semi-gap that dictates long lifetimes. The detectors exhibited sensitivity as high as 1143 ± 10 µC Gyair -1 cm-2 and a low detection limit of 2.68 µGy s-1 at 10 V. The researchers suggest that the stronger hydrogen bonding in N2 H5 + compounds compared to NH4 + MFHaPs may contribute to the detectors' enhanced stability.

Additive-Enhanced Crystallization of Inorganic Perovskite Single Crystals for High-Sensitivity X-Ray Detection.

Inorganic cesium lead halide perovskite single crystals are particularly intriguing to ionizing radiation detection by virtue of their material stability and high attenuation coefficients. However, the growth of high-quality inorganic perovskite single crystals remains challenging, mainly due to the limited solubility. In this work, an additive-enhanced crystallization method is proposed for cesium lead perovskites. The additive can remarkably increase the solubility of cesium bromide in dimethyl sulfoxide (DMSO) forming a balanced stoichiometric precursor solution, which prevents the formation of impurity phases. In addition, the additives would react with DMSO generating glyoxylic acid (GLA) via nucleophilic substitution and Kornblum oxidation reactions. The GLA can form stable PbBr2 -DMSO-GLA complexes, which enables better crystallinity, uniformity and much longer carrier lifetimes for the grown single crystals. The X-ray detectors using the additive-enhanced crystals exhibit an ultra-high sensitivity of 3.0 × 104  µC Gyair -1 cm-2 which is more than two orders of magnitude higher than that for the control devices.

General Spatial Confinement Recrystallization Method for Rapid Preparation of Thickness-Controllable and Uniform Organic Semiconductor Single Crystals.

Organic semiconductor single crystals (OSSCs) are ideal materials for studying the intrinsic properties of organic semiconductors (OSCs) and constructing high-performance organic field-effect transistors (OFETs). However, there is no general method to rapidly prepare thickness-controllable and uniform single crystals for various OSCs. Here, inspired by the recrystallization (a spontaneous morphological instability phenomenon) of polycrystalline films, a spatial confinement recrystallization (SCR) method is developed to rapidly (even at several second timescales) grow thickness-controllable and uniform OSSCs in a well-controlled way by applying longitudinal pressure to tailor the growth direction of grains in OSCs polycrystalline films. The relationship between growth parameters including the growth time, temperature, longitudinal pressure, and thickness is comprehensively investigated. Remarkably, this method is applicable for various OSCs including insoluble and soluble small molecules and polymers, and can realize the high-quality crystal array growth. The corresponding 50 dinaphtho[2,3-b:2″,3″-f]thieno[3,2-b]thiophene (DNTT) single crystals coplanar OFETs prepared by the same batch have the mobility of 4.1 ± 0.4 cm2 V-1 s-1 , showing excellent uniformity. The overall performance of the method is superior to the reported methods in term of growth rate, generality, thickness controllability, and uniformity, indicating its broad application prospects in organic electronic and optoelectronic devices.