Social competition drives collective action to reduce informal waste burning in Uganda.

Improving urban air quality is a pressing challenge in the Global South. A key source of air pollution is the informal burning of household waste. Reducing informal burning requires governments to develop formal systems for waste disposal and for residents to adopt new disposal behaviors. Using a randomized experiment, we show that social competitions between pairs of neighborhoods in Nansana municipality, Uganda, galvanized leadership and inspired collective action to reduce informal burning. All 44 neighborhoods in the study received a public health campaign, while 22 treated neighborhoods were paired and competed to reduce waste burning over an 8-mo period. Treated neighborhoods showed a 24 percent reduction (95% CI: 11 to 35 percent) in waste burning relative to control neighborhoods at the end of the competition period. There is no evidence that treated neighborhoods experienced a rebound in waste burning several months after the competitions. Community leaders reported greater effort in coordinating residents and more pride in their neighborhood when assigned to the competition treatment. These results suggest that creating focal points for leadership and collective action can be an effective and low-cost strategy to address policy problems that require broad participation and costly behavior change.

Graphene Derived from Municipal Solid Waste.

Landfilling is long the most common method of disposal for municipal solid waste (MSW). However, many countries seek to implement different methods of MSW treatment due to the high global warming potential associated with landfilling. Other methods such as recycling and incineration are either limited to only a fraction of generated MSW or still produce large greenhouse gas emissions, thereby providing an unsustainable disposal method. Here, the production of graphene from treated MSW is reported that including treated wood waste, using flash Joule heating. Results indicated a 71%-83% reduction in global warming potential compared to traditional disposal methods at a net cost of -$282 of MSW, presuming the graphene is sold at just 5% of its current market value to offset the cost of the flash Joule heating process.

Solid waste dumpsite leachate and contiguous surface water contain multidrug-resistant ESBL-producing Escherichia coli carrying Extended Spectrum ß-Lactamase (ESBL) genes.

Dumpsites generate leachates containing bacteria that may carry antibiotic resistance genes, such as extended spectrum ß-lactamase (ESBL). However, the contribution of dumpsite leachates in the environmental spread of ESBL genes has not been investigated in greater detail. This study aimed to quantify the impact of Ajakanga dumpsite leachate on the spread of ESBL genes through surface water. The susceptibility of Escherichia coli isolated from dumpsite leachate and the accompanying surface water to selected antibiotics was assessed by the standardized disc diffusion method. The isolates were evaluated for phenotypic ESBL production using the double disc synergy test (DDST). The detection of ESBL genes in the isolates was carried out using a primer-specific polymerase chain reaction (PCR). Escherichia coli isolates from leachate (n = 26/32) and surface water (n = 9/12) expressed ESBL phenotype. The ESBL-producing isolates showed the highest level of resistance to the 3rd generation cephalosporin antibiotics: cefotaxime (100%), cefpodoxime (97%), ceftazidime (97%), with low resistance observed to imipenem (6%) and azithromycin (3%). All the isolates were multidrug-resistant, showing resistance to three or more classes of antibiotics. All the ESBL-producing E. coli obtained carried blaCTX-M, 21/35 (60%) carried blaTEM while none of the isolates bore blaSHV. This study found that ESBL-producing Escherichia coli from dumpsite leachate and nearby surface water had identical resistance signatures indicating the relatedness of the isolates, and that dumpsite leachate could contribute to the transfer of ESBL-producing bacteria and their genes to receiving surface water. This study has necessitated the need for a review of the guidelines and operational procedures of dumpsites to forestall a potential public health challenge.

Decreasing Greenhouse Gas Emissions from the Municipal Solid Waste Sector in Chinese Cites.

Municipal solid waste (MSW) management systems play a crucial role in greenhouse gas (GHG) emissions in China. Although the government has implemented many policies to improve the MSW management system, the impact of these improvements on city-level GHG emission reduction remains largely unexplored. This study conducted a comprehensive analysis of both direct and downstream GHG emissions from the MSW sector, encompassing sanitary landfill, dump, incineration, and biological treatment, across 352 Chinese cities from 2001 to 2021 by adopting inventory methods recommended by the Intergovernmental Panel on Climate Change (IPCC). The results reveal that (1) GHG emissions from the MSW sector in China peaked at 70.6 Tg of CO2 equiv in 2018, followed by a significant decline to 47.6 Tg of CO2 equiv in 2021, (2) cities with the highest GHG emission reduction benefits in the MSW sector were historical emission hotspots over the past 2 decades, and (3) with the potential achievement of zero-landfilling policy by 2030, an additional reduction of 203.7 Tg of CO2 equiv is projected, with the emission reduction focus toward cities in South China (21.9%), Northeast China (17.8%), and Southwest China (17.3%). This study highlights that, even without explicit emission reduction targets for the MSW sector, the improvements of this sector have significantly reduced GHG emissions in China.

Regular Tetrahedron Model for the Assessment of High-Resolution Mass Spectrometry Data of Four-Way Fractionated Dissolved Organic Matter.

A regular tetrahedron model was established to pierce the fractionation of dissolved organic matter (DOM) among quaternary components by using high-resolution mass spectrometry. The model can stereoscopically visualize molecular formulas of DOM to show the preference to each component according to the position in a regular tetrahedron. A classification method was subsequently developed to divide molecular formulas into 15 categories related to fractionation ratios, the relative change of which was demonstrated to be convergent with the uncertainty of mass peak area. The practicality of the regular tetrahedron model was verified by seven kinds of sludge from waste leachate treatment and sewage wastewater treatment plants by using stratification of extracellular polymeric substances coupled with Orbitrap MS as an example, presenting the DOM chemodiversity in stratified sludge flocs. Sensitivity analysis proved that classification results were relatively stable with the perturbation of four model parameters. Multinomial logistic regression analysis could further help identify the effect of molecular properties on the fractionation of DOM based on the classification results of the regular tetrahedron model. This model offers a methodology for the assessment of specificity of sequential extraction on DOM from solid or semisolid components and simplifies the complex mathematical expression of fractionation coefficients for quaternary components.

Distribution of Per- and Polyfluoroalkyl Substances (PFASs) in a Waste-to-Energy Plant─Tracking PFASs in Internal Residual Streams.

Per- and polyfluoroalkyl substances (PFASs) constitute a diverse group of man-made chemicals characterized by their water- and oil-repellent properties and persistency. Given their widespread use in consumer products, PFASs will inevitably be present in waste streams sent to Waste-to-Energy (WtE) plants. We have previously observed a subset of PFASs in residual streams (ashes, treated process water, and flue gas) from a WtE plant. However, the transport and distribution of PFASs inside the WtE plant have remained unaddressed. This study is part of a comprehensive investigation to create a synoptic overview of the distribution of PFASs in WtE residues. PFASs were found in all sample types except for boiler ash. The total levels of 18 individual PFASs (Σ18PFASs) in untreated flue gas ranged from 5.2 to 9.5 ng m-3, decreasing with 35% ± 10% after wet flue gas treatment. Σ18PFASs in the condensate ranged from 46 to 50 ng L-1, of which perfluorohexanoic acid (PFHxA) made up 90% on a ng L-1 basis. PFHxA was also dominant in filter ash, where Σ18PFASs ranged from 0.28 to 0.79 ng g-1. This study shows that flue gas treatment can capture some PFASs and transfer them into WtE residues.

Arthropods in landfills and their accumulation potential for toxic elements: A review.

Landfills, as a source of potentially toxic elements (PTEs), pose a threat to the environment and human health. A literature review was conducted to explore the diversity of arthropods inhabiting solid waste landfills, as well as on the bioaccumulation of PTEs by arthropods. This review presents scientific papers over the last 20 years. Their importance in landfill ecosystems has been the subject of research; however, the issue of the accumulation of compounds such as toxic elements is emphasized only in a few studies. The bioaccumulation of PTEs was studied for 10 arthropod species that founded in landfills: Orthomorpha coarctata and Trigoniulus corallinus (class Diplopoda), Armadillidium vulgare and Trachelipus rathkii (class Malacostraca), the 6 species of the class Insecta - Zonocerus variegatus, Anacanthotermes ochraceus, Macrotermes bellicosus, Austroaeschna inermis, Calathus fuscipes and Harpalus rubripes.

Contaminant transport from solid waste dumps: Implications for environmental degradation with a focus on capital territory regions.

Open dumping of Municipal solid waste is the main method of solid waste management in Pakistan. To investigate the impacts of leachate transportation from these waste dumps on groundwater quality, two sites were selected (I-12 in Islamabad and Lohsar in Rawalpindi), water samples were collected from existing wells during summer, winter, and rainy seasons and were analyzed for physiochemical parameters using standard methods. Most groundwater samples showed contamination and values of various parameters exceeded the desired limits set by the World Health Organization (WHO) and the National Standard for Drinking Water Quality (NSDWQ), especially during the rainy season, whereas the least contamination in groundwater samples was observed during the winter season. The results obtained were, pH: 5.75-7.87, Electrical Conductivity (EC): 103-3460 µS cm-1, Total Dissolved Solids (TDS): 436-4425 mg L-1, Total Alkalinity (TA): 190-1330 mg L-1, Total Hardness (TH): 128-676 mg L-1, Chlorides (Cl⁻): 56.7-893.3 mg L-1, Nitrates (NO3⁻): 7.8-19.9 mg L-1, Dissolved Oxygen (DO): 6.1-20.8 mg L-1, Biological Oxygen Demand (BOD): 1.0-44.0 mg L-1 and Chemical Oxygen Demand (COD): 56-272 mg L-1. The findings suggest that the magnitude of groundwater contamination from leachate transportation is intricately influenced by factors such as leachate composition, seasonal variations and distance from the dumpsite. The contamination level reduced along the distance from the dumps. Except Copper (Cu) and Zinc (Zn), the concentration of all other heavy metals including, Iron (Fe), Chromium (Cr), Nickel (Ni), Lead (Pb), Cadmium (Cd) was found above standard appreciable limits. The t-test showed a significant difference in parameter concentrations for all seasons except for Cd and Zn. The calculation of water quality index through CCME (Canadian Council of Ministers of Environment) model revealed that all the groundwater samples around both the dump sites were of poor and marginal quality. In general, the groundwater quality of both study areas is not suitable for the drinking purpose. The study suggests regular testing and treating groundwater before use, use of engineered landfills, covering landfills with clay and vegetation and use of alternative strategies like composting and recycling for waste management.

Characteristics analysis of solid waste generation and carbon emission of beer production in China.

As the largest beer producer and consumer in the world, China's endeavors to reduce solid waste generation (SWG) and carbon emissions (CEs) in the course of beer production assume paramount significance. This study aims to assess the SWG and CEs in beer production within China at both national and provincial levels, and further delves into the spatial distribution characteristics and evolving patterns across the country. Key findings of the study include:(1) Peak SWG and CEs were recorded in 2013, reaching 861.62 million tons and 2315.10 tCO2e, respectively, followed by a consistent decline. (2) Among the three types of solid waste, spent grain exhibited the highest generation rate, contributing to 94.38% of the total. (3) The emergence of China's beer industry dates back to the 1980s in the northeastern region, expanding to the southeastern and the Yangtze River Basin during the 1990s, ultimately extending nationwide. (4) The spatial distribution of beer production revealed significant regional disparities and notable industry concentration. Notably, many provinces witnessed reduced CEs from beer production starting in 2015, although the extent of reduction varied in different provinces. These findings serve as a scientific foundation for formulating emission reduction strategies in beer producing and offer insights for other food industries in China.

Social acceptance, emissions analysis and potential applications of paper-waste briquettes in Andean areas.

The research assessed waste-based briquettes consumption compared to conventional fuels in the Andes. Laboratory tests were conducted together with on-field analysis in Colquencha (Bolivia). The laboratory study shows that the performances of briquettes are better in terms of PM2.5 (933.4 ± 50.8 mg kg-1) and CO emissions (22.89 ± 2.40 g kg-1) compared to animal dung (6265.7 ± 1273.5 mgPM2.5 kg-1 and 48.10 ± 12.50 gCO kg-1), although the boiling time increased due to the lower fuel consumption rate and firepower compared to shrubs. The social survey organized with 150 Bolivian citizens suggested that low-income households are not able to pay for an alternative fuel: about 40% would pay less than 4 USD per month, while methane use for cooking is positively correlated with the income level (r = 0.244, p < 0.05). On field analysis suggested that local cookstoves are not appropriate for briquettes combustion since indoor air pollution overcomes 30 ppm of CO and 10 mgPM2.5 m-3. On balance, local small manufactures can be the main target for selling waste-based briquettes to reduce shrubs and wood consumption. However, briquettes production costs seem not yet competitive to natural easy-to-obtain fuels (i.e., animal dung). The research encourages the use of cellulosic and biomass waste-based briquettes in the Andean area for cooking, heating, or manufacturing and strongly advises policy-makers to introduce economic incentives for the recovery of secondary raw materials.

Green loops and clean skies: Optimizing municipal solid waste management using data science for a circular economy.

The interplay between Municipal Solid Waste (MSW) Management and data science unveils a panorama of opportunities and challenges, set against the backdrop of rising global waste and evolving technological landscapes. This article threads through the multifaceted aspects of incorporating data science into MSW management, unearthing key findings, novel knowledge, and instigating a call to action for stakeholders (e.g. policymakers, local authorities, waste management professionals, technology developers, and the general public) across the spectrum. Predominant challenges like the enigmatic nature of "black-box" models and tangible knowledge gaps in the sector are scrutinized, ushering in a narrative that emphasizes transparent, stakeholder-inclusive, and policy-adaptive approaches. Notably, a conscious shift towards "white-box" and "grey-box" data science models has been spotlighted as a pivotal response to transparency issues. Furthermore, the discourse highlights the necessity of crafting data science solutions that are specifically moulded to the nuanced challenges of MSW management, and it underscores the importance of recalibrating existing policies to be reflexive to technological advancements. A resolute call echoes for stakeholders to not just adapt but immerse themselves in a continuous learning trajectory, championing transparency, and fostering collaborations that hinge on innovative, data-driven methodologies. Thus, as the realms of data science and MSW management entwine, the article sheds light on the potential transformation awaiting waste management paradigms, contingent on the nurtured amalgamation of technological advances, policy alignment, and collaborative synergy.

Migration patterns of heavy metals from solid waste stockpile soils by native plants for ecological restoration in arid and semi-arid regions of Northwest China.

Ecological remediation with native plants is the main measure to control the pollution of solid waste in Northwest China. However, the heavy metal transport characteristics of these native plants are still unidentified. This study analyzed the distribution of 16 heavy metals in native plants in the desulfurization gypsum yard (DGY), the gangue yard (GY) and the fly ash yard (FAY). The results showed that the soil contained many heavy metals in high concentrations. For instance, As concentrations were comparable to the global soil background values, whereas Cr and Mn concentrations in the area were 2-3 times greater than the global soil background values. The content of heavy metals in the plant root system increased first, then decreased as the distance from the yard increased. Ni, Pb, and Cd migrated well in Artemisia frigida Willd and Artemisia sieversiana Ehrhart ex Willd, with A. sieversiana showing a particularly strong migration in GY. A. sieversiana, on the other hand, was more successful at migrating Cd at DGY and had a similar capability for Mg migration in all three locations. Festuca rubra L was potentially suitable for planting in GY for Ni removal. In conclusion, the migration patterns of different heavy metals were not alike for plants in the three landfills. The results provided a basis for plant selection for ecological restoration in arid and semi-arid regions.

Adsorption performance of mineral-carbon adsorbents derived from coal gasification fine ash: Prepared via low-temperature alkali fusion method.

To address the solid waste challenges associated with coal gasification fine ash, this study conducted a low-temperature alkali fusion de-ashing treatment to transform coal gasification fine ash into mineral-carbon adsorbent. The preparation process was simplified without grinding, carbonization and high-temperature (500-800 °C) activation treatment. The results demonstrate a positive linear correlation between the ash removal rate of the samples (measured during the preparation process, i.e., low-temperature alkaline fusion treatment of coal gasification fine ash) and their maximum equilibrium adsorption capacity for methylene blue. For the samples with an ash removal rate of 95.71 %, which exhibit a maximum adsorption capacity of 161.36 mg/g for methylene blue. The adsorption behavior of methylene blue on mineral-carbon adsorbent was a monolayer adsorption on the surface of homogeneous medium, involving both physical and chemical adsorption. The main adsorb rate-controlling steps for the samples with ash removal rates of 27.91-59.33 % and 95.71 % were the intra particle diffusion process and the liquid film diffusion process, respectively. The adsorption mechanism of methylene blue on the surface of mineral-carbon adsorbent involved electrostatic attraction and hydrogen bonding. The aforementioned results demonstrated the potential of coal gasification fine ash as an adsorbent material, providing new options for promoting the resource utilization and high-value applications of coal gasification fine ash.

Evaluating combustion kinetics and quantifying fuel-N conversion tendency of shoe manufacturing waste.

Combustion is an effective and cost-efficient thermochemical conversion method for solid waste, showing promise for the resource utilization of shoe manufacturing waste (SMW). However, SMW is generally composed of different components, which can lead to unstable combustion and excessive pollutant emissions, especially NOx. To date, combustion characteristics, reaction mechanism and fuel nitrogen (fuel-N) conversion of different SMW components remain unclear. In this work, the combustion behavior of typical SMW components combustion was investigated using Thermogravimetric coupled with Fourier transform infrared spectrum (TG-FTIR). A simplified single-step reaction mechanism was proposed according to the temperature interval to estimate reaction mechanism of SMW. Additionally, the relationship between fuel-N conversion tendency and fuel properties was established. The results indicate that the values for the comprehensive combustion performance index (S) and flammability index (C) range from 1.65 to 0.44 and 3.98 to 1.37, respectively. This demonstrates the significant variability in combustion behavior among different SMW components. Cardboard, leather and sponge have higher values of S and C, suggesting a better ignition characteristic and a stable combustion process. During the combustion of SMW, nitrogen oxides (NO and N2O) are the main nitrogen-containing compounds in the flue gases, with NO being the major contributor, accounting for over 82.97 % of the nitrogen oxides. NO has a negative correlation with nitrogen content, but it is opposite for N2O, HCN and NH3. Furthermore, the conversion of NO, N2O and NH3 is proportional to logarithmic values of O/N, while its conversion to HCN is proportional to logarithmic values of VM/N. These findings facilitate the prediction of the fuel-N conversion of solid waste combustion. This work might shed light on combustion optimization and in-situ pollutant emission control in solid waste combustion.

Sustainability assessment of biofuel and value-added product from organic fraction of municipal solid waste.

The current study aims to examine the techno-economic and environmental assessment of biorefinery development within a circular bioeconomy context by using an organic fraction of municipal solid waste (OFMSW) by extraction of lipids, carbohydrates, and proteins with 98, 51 and 62 % by mass of conversion efficiency and yield recovery, and value-added fractions production as well. Fatty acid methyl ester (biodiesel) and glycerol (biofuel) were produced by applying transesterification process, and the remaining biomass was converted into biocrude oil by thermal liquefication. The biorefinery using 613 kg of OFMSW produced biodiesel, glycerol, and bioethanol with 126 litter, 14.3 kg, and 172 litter respectively, as well as value-added fractions, such as biocrude oil with 78 kg. The environmental impact was assessed using the life cycle assessment (LCA) framework, ReCiPe2016 Mid-point (H) approach, through 18 different environmental categories. The key findings elucidate that Terrestrial ecotoxicity, Climate change, Fossil depletion and Human toxicity were the main impact categories which are potentially contributed 9.81E+02 kg 1,4-DB eq., 1.43E+03 kg CO2 eq., 2.04E+02 kg oil eq., and 8.08E+01 kg 1,4-DB eq. The normalization (person per equivalent) analysis revealed that only categories of resource reduction (fossil and metal depletion) are the key contributors to environmental degradation. The biorefinery system's total revenue was estimated at USD 6.817,509 million annually. The calculated revenue was USD 0.026 million daily in a shift of 8 h. The Net present worth (NPW) was calculated at USD 499.97 million by assuming a discount factor of 10 % and inflation rate of 5 % for 15 years. The project is considered feasible by demonstrating 7.15 payback year. This research showcased the efficient portrayal of the biorefinery system and succinctly conveyed the significant circular bioeconomy for a greener future. Thus, it could be helpful to the stakeholder's context towards techno-economic and environmental evaluation.

A systematic review of coastal zone integrated waste management for sustainability strategies.

Coastal areas stand out because of their rich biodiversity and high tourist potential due to their privileged geographical position. However, one of the main problems in these areas is the generation of waste and its management, which must consider technical and sustainable criteria. This work aims to conduct a systematic review of the scientific literature on integrated solid waste management (ISWM) by considering scientific publications on the scientific basis for the proposal of sustainability strategies in the context of use and efficiency. The overall method comprises i) Search strategy, merging and processing of the databases (Scopus and Web of Science); ii) Evolution of coastal zone waste management; iii) Systematic reviews on coastal landfills and ISWM in the context of the circular economy; and iv) Quantitative synthesis in integrated waste management. The results show 282 studies focused on coastal landfills and 59 papers on ISWM with the application of circular economy criteria. Systematic reviews allowed for the definition of criteria for the selection of favorable sites, such as i) sites far from the coastline, ii) impermeable soils at their base to avoid contamination of aquifers, iii) use of remote sensing and geographic information system tools for continuous monitoring, iv) mitigation of possible contamination of ecosystems, v) planning the possibility of restoration (reforestation) and protection of the environment. In coastal zones, it is necessary to apply the ISWM approach to avoid landfill flooding and protect the marine environment, reducing rubbish and waste on beaches and oceans. Therefore, applying the circular economy in ISWM is critical to sustainability in coastal environments, with the planet's natural processes and variations due to climate change.

Exploring the hidden chemical landscape: Non-target and suspect screening analysis for investigating solid waste-associated environments.

Solid waste is an inevitable consequence of urbanization. It can be safely managed in municipal landfills and processing plants for volume reduction or material reuse, including organic solid waste. However, solid waste can also be discarded in (un-)authorized dumping sites or inadvertently released into the environment. Legacy and emerging contaminants have the potential to leach from solid waste, making it a significant pathway to the environment. Non-target screening (NTS) and suspect screening analysis (SSA) have become helpful tools in environmental science for the simultaneous analysis of a wide range of chemical compounds. However, the application of these analytical approaches to environmental samples related to Raw or Processed Solid Waste (RPSW) has been largely neglected so far. This perspective review examines the potential and policy relevance of NTS and SSA applied to waste-related samples (liquid, gaseous and solid). It addresses the hurdles associated with the chemical safety of solid waste accumulation, processing, and reuse, and the need for landfill traceability, as well as effectiveness of leachate treatments. We reviewed the current applications of NTS and SSA to environmental samples of RPSW, as well as the potential adaptation of NTS and SSA techniques from related fields, such as oilfield and metabolomics, to the solid waste domain. Despite the ongoing technical challenges, this review highlights the significant potential for the implementation of NTS and SSA approaches in solid waste management and related scientific fields and provides support and guidance to the regulatory authorities.

Factors influencing willingness to pay for improved solid waste collection services among households in urban cities in Uganda: empirical evidence from Lira City.

Waste management in Lira City, Uganda faces significant challenges, particularly in the area of waste collection. Pollution and health risks from uncollected waste are rampant, posing serious threats to human health and the environment. This persistent problem demands urgent attention and effective solutions to improve waste collection and safeguard the well-being of the community and the natural surroundings. This study aimed to assess households' willingness to pay for improved waste collection services, examine their waste management practices, and identify influencing factors. We employed a multistage sampling technique to randomly select 585 household heads and conducted key informant interviews with city officials and private waste collectors. Data analysis was conducted with STATA 17 and results showed that 48.12% of households were willing to pay an average of UGX 3012 ($0.84) per month for better services. Factors including education level, occupation, distance to waste collection sites, and environmental awareness significantly influenced this willingness. The study highlights a significant gap in public awareness and understanding of efficient solid waste management practices and concludes that enhancing public awareness is crucial for improving environmental health and safety in Lira City.

Global trends of waste-to-energy (WtE) technologies in carbon neutral perspective: Bibliometric analysis.

Waste-to-energy (WtE) technology is at the forefront of low-carbon municipal solid waste (MSW) treatment. MSW has been favoured by researchers in recent years due to its high potential to dispose of resources with WtE technology, which contributes to the carbon neutrality goal. However, there is a lack of research that integrates MSW WtE treatment from a global perspective and explores its future direction. Bibliometric methods are widely used because of their advantages in qualitative and quantitative literature information analysis. A comprehensive search was conducted in the Web of Science (WOS) Core Collection database, covering the period from 1990-2022, resulting in the collection of 702 articles. Subsequently, bibliometric software such as CiteSpace, VOSviewer, and Bibliometrix, were jointly employed for co-occurrence, co-citation, and cluster analyses, providing an in-depth qualitative and quantitative analysis of the research hotspots and development trends of WtE technology for MSW treatment. The research findings indicate a rapid growth in studies on carbon emission reduction through WtE technology for MSW treatment since 2015, with these related articles accounting for 50% of articles. Globally, China, the United States, Italy, and other countries were active research regions, with Chinese research institutions making the largest contributions. However, contributions from developing countries are limited. Furthermore, this study systematically elaborates on the research hotspots in this field. Finally, this study identified some frontier research hotspots and directions. Research on WtE technology primarily focuses on technological methods and policy management, particularly from the carbon neutrality perspective, emphasis WtE technology sustainability in reducing carbon emissions and achieving carbon neutrality goals. Promoting the use of assisted decision-making models in the MSW management process, and focusing on the conversion of food waste into valuable energy. It is hoped that these research directions will provide new ideas for the balanced and rapid development of WtE technology.

Probabilistic human health risk assessment of PCDD/Fs near municipal solid-waste incinerator using Monte Carlo analysis coupled with triangular fuzzy numbers.

PCDD/Fs are dioxins produced by waste incineration and pose risks to human health. We aimed to detail the health risks of airborne and soil PCDD/Fs near a municipal solid-waste incinerator (MSWI) for the surrounding population and develop a new model that improves upon existing methods. Thus, we conducted field sampling and then investigated a MSWI in the Pearl River Delta (2016-2018). Our results showed that the carcinogenic and non-carcinogenic risk values of PCDD/Fs exposed to residents in nearby areas were acceptable, with hazard index (HI) values lower than 1.0 and a total carcinogenic risk lower than 1.0E-6. Notably, the results raised concerns regarding higher non-carcinogenic risks in children than in adults. Comparative analysis of the frequency accumulation diagram, accumulated probability risk, and the absolute value of error (δ) between the 95% confidence interval (CI) and the 90% CI of the Monte Carlo stochastic simulation-triangular fuzzy number (MCSS-TFN) and the MCSS model, respectively, demonstrated that the MCSS-TFN exhibited less uncertainty than the MCSS model, regardless of the health risk value of PCDD/Fs in ambient air or in soil. This observation underscores the superiority of the MCSS-TFN model over other models in assessing the health risks associated with PCDD/Fs in situations with limited data. Our new method overcomes the limited dataset size and high uncertainty in assessing the health risks of dioxin substances, providing a more comprehensive understanding of their associated health risks than MCSS models.