Hip strength does not correlate with hip and knee biomechanics during single-leg tasks: A systematic review with meta-analysis and evidence gap map.

We systematically reviewed and synthesized the evidence for the relationship between hip strength and hip and knee biomechanics during single-leg tasks in uninjured and injured populations. We searched CINAHL, EMBASE, PubMed, SportDiscus, and Web of Science from inception to July 2024. We included cross-sectional studies with uninjured and/or injured participants that reported correlations between hip strength and hip or knee kinematics during a single-leg task. We identified 41 articles that reported the correlations between hip strength and hip or knee kinematics during a single-leg task for uninjured (n = 33) and/or injured (n = 12) populations. We identified moderate-to-strong evidence for no-to-poor relationships between most hip strength and hip and knee kinematics during a single-leg task for uninjured (r = -0.33-0.45) and injured populations (r = -0.24-0.24). We observed limited-to-moderate evidence for fair-to-moderate negative relationships between concentric and eccentric hip abduction strength and hip adduction (r = -0.52) and knee abduction kinematics (r = -0.45-0.59) for uninjured populations. Isometric hip strength may not play as important of a role in controlling lower extremity motion during single-leg tasks as previously perceived, but isokinetic strength may be a better indicator of lower extremity motion during single-leg tasks.Trial Registration:PROSPERO#CRD42020153166.

No Loss of Strength After Insertional Achilles Tendon Reconstruction With Single-Anchor or Double-Row Repair.

Many different types of surgical repair for insertional Achilles tendinosis have been described. Strength after surgery is an essential factor for patient function and satisfaction. A retrospective series of patients that underwent surgery for insertional Achilles tendon surgery were contacted to come in for prospective strength testing, with the tester blinded to the type of surgery performed. Thirty-seven patients came in for testing, 24 with a single-anchor repair and 13 with a double-row repair. Strength of plantarflexion was tested at 60°/s and 120°/s and was compared. First each operative leg was compared to the nonoperative leg as a control. Then the percentage change, or symmetry, from the control leg to the operative leg was compared between those with a single-anchor and double-row repair. Satisfaction was also assessed with a simple questionnaire and compared the types of repair. The results demonstrated there was no statistically significant change in strength after surgery compared to the nonoperative leg, and there was no difference in limb symmetry between types of repair. Similarly, there was no difference between the groups in satisfaction. Our study showed that there is, on average, no loss of strength after insertional Achilles tendon surgery at an average follow-up of nearly 2 years, regardless of type of repair.

Field Hip Stability Isometric Test (F-HipSIT): Reliability of Assessing the Hip Posterolateral Muscle Strength in Sports Settings.

CONTEXT: The Hip Stability Isometric Test (HipSIT) is commonly employed in clinical settings for evaluating the hip posterolateral muscle strength. In this study, we introduced the "Field Hip Stability Isometric Test" (F-HipSIT) and assessed the intrarater and interrater reliability of this strength assessment specifically designed for sports settings. DESIGN: Reliability study. METHODS: Two independent raters (A and B) went to athletes' training facilities to conduct 2 sessions of F-HipSIT spaced at least 1 week apart. The average peak force value from 3 valid attempts of each leg was recorded and normalized by the participant's body mass for statistical analysis. RESULTS: Thirty male and 30 female amateur athletes took part in this study. Rater A obtained similar values in the first (0.39 [0.05] and 0.44 [0.07] kg·f/kg) and second (0.39 [0.06] and 0.45 [0.07] kg·f/kg) testing days for men and women, respectively. Rater B also found similar values in the first (0.35 [0.06] and 0.42 [0.08] kg·f/kg) and second (0.36 [0.06] and 0.45 [0.08] kg·f/kg) testing days for men and women, respectively. Excellent intrarater intraclass correlation coefficient (ICC) values were found for men (ICC = .922) and women (ICC = .930), with coefficient of variation of 6% to 8% and minimal detectable change of 0.06 to 0.10 kg·f/kg. The F-HipSIT presented good interrater reliability for men (ICC = .857) and women (ICC = .868), with coefficient of variation of 5% and minimal detectable change of 0.05 to 0.06 kg·f/kg. CONCLUSION: The F-HipSIT intrarater and interrater reliability among male and female recreational athletes supports this field test as a quick and convenient screening tool to monitor hip posterolateral muscle strength in sports settings.

Analysis of velocity- and power-load relationships of the free-weight back-squat and hexagonal bar deadlift exercises.

The aim of this study was to analyse the load-velocity and load-power relationships in the free-weight back-squat (BSQ) and hexagonal bar deadlift (HBD) exercises. Twenty-five (n = 25) resistance-trained men (age = 23.7 ± 2.8 years) performed a progressive load test at maximal intended velocity to determine their BSQ and HBD one-repetition maximum (1RM). Mean propulsive velocity (MPV) during the concentric phase of the lift was recorded through a linear encoder. Load-velocity and load-power relationships were analysed by fitting linear regression and the second-order polynomial, respectively, to the data. Maximum strength (1RM), MPV (30-80% 1RM), and power output (30-90% 1RM) were higher for HBD compared to BSQ exercise (p < 0.05). A very strong relationship between MPV and relative intensity was found for both BSQ (R2 = 0.963) and HBD (R2 = 0.967) exercises. The load that maximizes power output (Pmax) was 64.6 ± 2.9% (BSQ) and 59.6 ± 1.1% (HBD) 1RM. There was a range of loads at which power output was not different than Pmax (BSQ: 40-80% 1RM; HBD: 50-70% 1RM). In conclusion, the load-velocity and load-power relationships might assist strength and conditioning coaches to monitor and prescribe exercise intensity in the BSQ and HBD exercises using the velocity-based training approach.

Supraspinatus pathology on MRI is associated with degree of weakness on dynamic clinical strength testing.

OBJECTIVE: To analyze shoulder strength and function in patients presenting with possible supraspinatus pathology and to ascertain if these clinical findings are associated with severity of supraspinatus pathology on MRI. MATERIALS AND METHODS: In total, 171 patients with presumptive rotator cuff pathology and with preserved strength on standard rotator cuff examination were prospectively recruited. Patients were subjected to bilateral shoulder strength testing employing dynamometry; this included isometric strength testing at 90° of abduction, followed by eccentric assessment of isotonic strength from full abduction through the full range of motion until the arm rested at the patient's side. We calculated absolute strength and symptomatic-to-asymptomatic arm (S/A) strength ratios. On subsequent shoulder MRI, supraspinatus pathology was designated into one of seven categories. The association between strength measurements and MRI findings was analyzed. RESULTS: Increasing lesion severity on MRI was associated with both decreasing absolute strength (no tear [59.9 N] to full-thickness tear [44.2 N]; P = 0.036) and decreasing S/A strength ratios during isotonic testing (no tear [91.9%] to full-thickness tear [65.3%]; P = 0.022). In contrast, there were no significant relationships between imaging severity and absolute strength or S/A strength ratios on isometric testing. CONCLUSION: Severity of supraspinatus pathology on MRI was associated with dynamic clinical function. These results validate the clinical correlation between MRI designations of supraspinatus pathology and function and suggest the need for future work to investigate utility of dynamic (versus isometric) rotator cuff physical examination maneuvers.

Influence of an Exercise Program, Muscle Strength, Proprioception, and Arm Length on Veterinary Students' Bovine Pregnancy Diagnosis Accuracy.

Bovine pregnancy diagnosis (PD) by transrectal palpation (TRP) is an important skill for veterinary graduates. Factors influencing students' PD accuracy were investigated to optimize bovine PD by TRP training without increasing live animal exposure. The objective was to determine whether arm length and strength, proprioception, and exposure to a 6-week exercise training program were significantly associated with students' PD accuracy. Veterinary students (n = 128) who had previously received formal theoretical and practical training in bovine TRP and PD (live cows and TRP simulators) were assessed for PD accuracy on live cows. Prior to assessment, arm muscle strength measurement, an exercise program, and additional TRP sessions on Breed'n Betsy® simulators and live cows were offered to the students. Seventy-eight students volunteered to participate in the arm length measurement, muscle strength, and proprioception testing. Of these, 35 randomly allocated students completed a 6-week exercise program, after which muscle strength was reassessed. Each student performed PDs on six cows of which the pregnancy status, ranging from 6 weeks to 9 months pregnant or not pregnant, was predetermined by an experienced veterinarian. PD accuracy was measured as sensitivity and specificity, being defined as the proportion of pregnant or nonpregnant cows, respectively, correctly identified by the student. It is concluded that hand grip strength and participation in an exercise program are significant predictors of veterinary students' PD accuracy. Implementation of an exercise program aimed at improving grip strength in the veterinary curriculum is a novel approach to improve bovine TRP and PD training.

Differences in the magnitude and reliability of velocity variables collected during 3 variants of the bench press exercise.

This study aimed to compare the reliability and magnitude of velocity variables between 3 variants of the bench press (BP) exercise in participants with and without BP training experience. Thirty males, 15 with and 15 without BP experience, randomly performed 3 variants of the BP on separate sessions: (I) concentric-only, (II) fast-eccentric and (III) controlled-eccentric. The mean velocity (MV) and maximum velocity (Vmax) of the concentric phase were collected against 3 loads (≈30%1RM, 50%1RM, and 75%1RM) with a linear velocity transducer. Reliability was high regardless of the variable, BP variant, and load (coefficient of variation [CV] ≤ 4.47%, intraclass correlation coefficient [ICC] ≥ 0.87). The comparison of the CVs suggested a higher reliability for the fast-eccentric BP (8 out of 12 comparisons), followed by the concentric-only BP (5 out of 12 comparisons), and finally the controlled-eccentric BP (never provided a higher reliability). No differences in reliability were observed between experienced (CV ≤ 4.71%; ICC ≥ 0.79) and non-experienced (CV ≤ 6.29%; ICC ≥ 0.76) participants. The fast-eccentric BP provided the highest MV (p < 0.05) and no differences were observed for Vmax. These results support the assessment of movement velocity during the fast-eccentric BP even in participants without experience.

Cartilage damage at the time of anterior cruciate ligament reconstruction is associated with weaker quadriceps function and lower risk of future ACL injury.

PURPOSE: To determine whether articular cartilage damage noted at the time of primary anterior cruciate ligament reconstruction (ACLR) affects the likelihood of achieving ≥ 90% symmetry for isokinetic extension strength at 6 months after surgery or risk of recurrent ACL injury. METHODS: Five hundred and eight patients underwent primary ACLR and diagnostic arthroscopy. All identified cartilage lesions were graded using the Outerbridge system. All patients underwent isokinetic strength testing. The association between cartilage Outerbridge grade and a ≥ 90% Limb Symmetry Index (LSI) and recurrent ACL injury risk at mean 38.7 month follow-up (SD 31.8) was evaluated via multivariate regression analysis. RESULTS: Grade 2 or higher damage was present in 394 (77.5%) of patients, grade 3 or higher in 143 (28.1%) and grade 4 in 83 (16.4%) at time of ACLR. Ipsilateral ACLR graft rupture occurred in 31 (6.1%) of patients. Contralateral ACL injury occurred in 19 (3.7%). Patients with grade 2 or higher damage were significantly less likely to meet an LSI goal of ≥ 90% for fast (300°/s) isokinetic extension. There was no association with slow isokinetic extension. Cartilage lesion severity at or beyond grade 2 had a similar effect on isokinetic testing results regardless of compartment involvement or performance of microfracture. Patients with grade 2-4 cartilage damage were less likely to sustain a second ipsilateral ACL injury or a contralateral native ACL injury. CONCLUSIONS: Cartilage damage seen at time of ACL reconstruction is common and associated with lower likelihood of achieving ≥ 90% symmetry for isokinetic extension strength at 6 months after surgery. However, lower recurrent ACL injury rates are seen in patients with concurrent cartilage damage. These data may inform future clinical decisions regarding operative managment of recurrent ACL injuries. LEVEL OF EVIDENCE: III.

Validity and reliability of serratus anterior hand held dynamometry.

BACKGROUND: Strength testing of the serratus anterior muscle with hand held dynamometry (HDD) in supine subjects has low reproducibility, and is influenced by compensatory activity of other muscles like the pectoralis major and upper trapezius. Previously, two manual maximum voluntary isometric contraction tests of the serratus anterior muscle were reported that recruited optimal surface electromyography (sEMG) activity in a sitting position. We adapted three manual muscle tests to make them suitable for HHD and investigated their validity and reliability. METHODS: Twenty-one healthy adults were examined by two assessors in one supine and two seated positions. Each test was repeated twice. Construct validity was determined by evaluating force production (assessed with HHD) in relation to sEMG of the serratus anterior, upper trapezius and pectoralis major muscles, comparing the three test positions. Intra- and interrater reliability were determined by calculating intra-class correlation coefficients (ICC) smallest detectable change (SDC) and standard error of measurement (SEM). RESULTS: Serratus anterior muscle sEMG activity was most isolated in a seated position with the humerus in 90° anteflexion in the scapular plane. This resulted in the lowest measured force levels in this position with a mean force of 296 N (SEM 15.8 N). Intrarater reliability yielded an ICC of 0.658 (95% CI 0.325; 0.846) and an interrater reliability of 0.277 (95% CI -0.089;0.605). SDC was 127 Newton, SEM 45.8 Newton. CONCLUSION: The results indicate that validity for strength testing of the serratus anterior muscle is optimal with subjects in a seated position and the shoulder flexed at 90° in the scapular plane. Intrarater reliability is moderate and interrater reliability of this procedure is poor. However the high SDC values make it difficult to use the measurement in repeated measurements.

Comparison of scapular position and upper extremity muscle strength in patients with and without lateral epicondylalgia: a case-control study.

BACKGROUND: The symptoms of lateral epicondylalgia (LE) can be persistent, and recurrence is frequent. Recurrence can be related to proximal segment impairment of the kinetic chain. Knowledge of any relation in the kinetic chain in LE may help treatment. We aimed to investigate scapular position and upper extremity muscle strength in patients with LE and to compare them with controls. METHODS: The study enrolled 51 patients with LE and 51 age-matched controls. We assessed scapular position asymmetry using the lateral scapular slide test and measured the strength of the upper trapezius (UT), middle trapezius (MT), lower trapezius, and serratus anterior muscles in addition to shoulder abduction, external rotation, and internal rotation and grip strength. RESULTS: The percentage of participants with scapular asymmetry was greater in the patients than in the controls (P = .005). The involved side regarding shoulder external rotation among the patients was significantly weaker than in the controls (P = .016, P = .009). The involved side of the LE patients was significantly weaker than the uninvolved side in terms of shoulder abduction, external rotation, and internal rotation (P = .013, P = .048, P = .013). The UT/MT ratio on the nondominant side of the controls was significantly greater than that on the involved side of the LE patients (P = .016). CONCLUSION: Upper extremity muscle strength, grip strength, UT/MT ratio, and scapular position are affected in patients with LE. In addition to the elbow, focusing on the upper segments is essential in the management of LE.

Peak torque, rate of torque development and average torque of isometric ankle and elbow contractions show excellent test-retest reliability.

BACKGROUND: Peak Torque (PT), Rate of Torque Development (RTD) and Average Torque (AT) over a single contraction assess the three components of muscle function during isometric contractions. Surprisingly, AT has never been reported or its reliability confirmed. OBJECTIVES: This study aims to establish protocol reliability for ankle dorsiflexion and elbow extension isometric muscle function (PT, RTD, AT) in healthy participants using the Biodex System 3 Dynamometer. METHODS: Twelve participants (6 male, 6 female, mean age 39 . 8 ± 16 . 0 years) performed four maximal isometric contractions on two occasions. Intraclass Correlation Coefficient (ICC), Typical Error (TE) and Coefficient of Variation (CV) for PT, RTD and AT were reported. RESULTS: The ICC for all strength parameters varied from 0.98-0.92. TE for ankle dorsiflexion PT was 1.38 Nm, RTD 7.43 Nm/s and AT 1.33 Nm, CV varied from 6 . 26 ± 6 . 25 % to 11 . 72 ± 8 . 27 % . For elbow extension, TE was 3.36 Nm for PT, 14.87 Nm/s for RTD and 3.03 Nm for AT, CV varied from 5 . 97 ± 4 . 52 % to 18 . 46 ± 14 . 78 % . CONCLUSION: Maximal isometric ankle dorsiflexion and elbow extension PT, RTD and AT can be evaluated with excellent reliability when following the described protocol. This testing procedure, including the application of AT, can be confidently applied in research, exercise or clinical settings.

Neural, biomechanical, and physiological factors involved in sex-related differences in the maximal rate of isometric torque development.

OBJECTIVE: Recent research has reported that lower maximal rate of torque development (dτ/dt max) exhibited by females, relative to males, during knee extension can be accounted for by normalization to a maximal voluntary contraction (MVC); however, this was not seen in the upper limb. PURPOSE: The aim of the current work was to examine the contribution of maximum strength (τmax), twitch contraction time (CT), muscle fiber condition velocity (MFCV), and rate of muscle activation (Q30) to sex-differences in the dτ/dt max during maximal isometric dorsiflexion. METHODS: Thirty-eight participants (20 males; 18 females) performed both maximal voluntary and evoked isometric contractions of the tibialis anterior across 3 days. Ten maximal compound muscle action potentials were elicited and subsequently followed by three, 5-s contractions. From the recordings, MFCV, dτ/dt max, τmax, CT, electromechanical delay (EMD), root-mean squared (RMS) amplitude, peak-to-peak voltage (Vpp), and Q30 were calculated. RESULTS: An ANCOVA showed that τmax accounted for all the sex-differences in dτ/dt max (p = 0.96). There were no significant differences between groups with respect to MFCV, RMS amplitude, Vpp amplitude, or CT. However, there was a significant sex-difference in dτ/dt max, τmax, and Q30. Females had longer evoked EMD times compared with males (15.69 ± 10.57 ms versus 9.95 ± 3.46 ms; p = 0.01), but the voluntary EMD times were not different. CONCLUSION: The current research supports the work by Hannah et al. Exp Physiol 97:618-629, (2012) that normalization to MVC in the quadriceps is able to account for all sex-differences in rate of toque development in the lower limb.

The effects of yoga on shoulder and spinal actions for women with breast cancer-related lymphoedema of the arm: A randomised controlled pilot study.

BACKGROUND: We aimed to evaluate the effect of an 8-week yoga intervention on the shoulder and spinal actions of women with breast cancer-related arm lymphoedema. METHOD: A randomised controlled pilot trial. The intervention group (n = 12) completed eight weeks of daily yoga sessions while the control group (n = 11) continued with best current care including information on compression sleeves, skin care, risks of temperature variations and recommended safe use of affected arm. Lumbo-pelvic posture, range of motion (ROM) in the shoulder and spine, and strength in shoulder and pectoral major and minor, and serratus anterior were taken at baseline, week 8 and after a 4-week follow-up. Outcome assessors were blinded to allocation. RESULTS: At week eight the intervention group had an improvement in lumbo-pelvic posture, as indicated by a reduction in pelvic obliquity compared to the control group (mean difference = -8.39°, 95 % CI: -15.64 to -1.13°, p = 0.023). A secondary finding was that strength in shoulder abduction significantly increased following the yoga intervention in both the affected (9.5 kg; CI: 0.34 to 18.66, p = 0.042) and non-affected arm (11.58 kg; CI: 0.25 to 22.91; p = 0.045). There were no significant between group changes in any ROM measures as a result of the yoga intervention. CONCLUSION: This pilot study demonstrates that participation in yoga may provide benefits for posture and strength in women with Breast Cancer Related Lymphoedema. The improvements may be attributed to the focus of yoga on overall postural and functional movement patterns. Further trials with longer intervention that follow this methodology are warranted. TRIAL REGISTRATION: The Australian New Zealand Clinical Trials Registry ACTRN12611000202965 .

Long-term effects on subscapularis integrity and function following arthroscopic shoulder stabilization with a low anteroinferior (5:30 o'clock) portal.

PURPOSE: The use of a low anteroinferior (5:30 o'clock) portal for arthroscopic shoulder stabilization allows an anatomical refixation of the capsulolabral complex. This anteroinferior portal, however, penetrates the inferior subscapularis (SSC), which is criticized. Therefore, the aim of the study was to evaluate the functional and structural properties of the SSC in patients with anteroinferior shoulder stabilization. The hypothesis was that it does not harm the SSC by demonstrating full muscular function and imaging-based normal structure at a long-term follow-up. METHODS: Twenty patients were examined (14 males and six females; mean age 37.0 years) retrospectively after a mean follow-up of 9.6 years. At final follow-up, clinical examination and clinical scores (ASES, Constant-Murley, WOSI, and Rowe score) were documented. Additionally, SSC strength was evaluated with a custom-made electronic force measurement plate. All patients underwent bilateral magnetic resonance imaging to assess structural integrity and fatty infiltration (grading according to Fuchs et al.) of the SSC. Furthermore, vertical and transversal (superior and inferior) diameters of the muscle and the muscle area in a parasagittal plane were measured. RESULTS: Clinical scores revealed good-to-excellent long-term results (ASES 92 points, Constant-Murley 82 points, WOSI 85 %, and Rowe 84 points). Force measurement in comparison with the contralateral side showed no significant (p > 0.05) differences for the 'belly-press' test (ipsilateral 102 N vs. contralateral 101 N) and the 'lift-off' test (73 vs. 69 N). There were also no significant differences between the mean diameters and the areas of the SSC muscle belly (vertical diameter ipsilateral 92 mm vs. contralateral 94 mm; superior transversal 28 vs. 29 mm; inferior transversal 34 vs. 34 mm; area 2336 vs. 2526 mm(2)). CONCLUSION: Arthroscopic labral repair with a low anteroinferior portal demonstrates no signs of structural and functional impairment of the SSC after 9.6 year follow-up. For clinical relevance, the lower part of the SSC can be penetrated for an optimal anchor placement in shoulder instabilities or Bankart fractures without concerns of a negative long-term effect on the SSC. LEVEL OF EVIDENCE: Case series, Level IV.

Reliability of Isometric and Eccentric Isokinetic Shoulder External Rotation.

CONTEXT: Shoulder external rotators are challenged eccentrically throughout the deceleration phase of throwing, which is thought to contribute to overuse injuries. To evaluate the effectiveness of intervention programs, as well as identifying deficits, reliable and responsive measures of isometric and eccentric shoulder external rotation are necessary. Previously, isometric measures have primarily tested a single position, and eccentric measures have not been found to have high reliability. OBJECTIVE: To examine the between-days reliability of multiple-angle isometric and dynamic eccentric isokinetic testing of shoulder external rotation. DESIGN: Repeated measures. PARTICIPANTS: 10 healthy subjects (age 30 ± 12 y, height 166 ± 13 cm, mass 72 ± 10 kg). MAIN OUTCOME MEASURES: Average isometric peak torque of shoulder external rotation at 7 angles was measured. From these values, the angle of isometric peak torque was calculated. Dynamic eccentric average peak torque, average total work, and average angle of peak torque were measured. RESULTS: Between-days reliability was high for average peak torque during isometric contractions at all angles (ICC ≥ .85), as it was for dynamic eccentric average peak torque (ICC ≥ .97). The estimated angle of isometric peak torque (ICC ≤ .65) was not highly reliable between days. The average angle of peak torque from the eccentric testing produced inconsistent results. Average total work of dynamic eccentric shoulder external rotation was found to be highly reliable between days (ICC ≥ .97). CONCLUSION: Aspects of force such as peak torque and total work in isometric and eccentric testing of the shoulder external-rotator muscles can be measured reliably between days and used to objectively evaluate shoulder strength and identify changes when they occur. Angle measurements of peak torque could provide insight into the mechanical properties of the posterior shoulder muscles but were found to be inconsistent between days.

Reliability of force per unit cross-sectional area measurements of the first dorsal interosseus muscle.

The purpose of this study was to determine the reliability of maximum voluntary isometric force (MVIF), cross-sectional area (CSA) and force per unit CSA measures, of the first dorsal interosseus (FDI) muscle, using a custom-built dynamometer and ultrasonography. Twenty-seven participants completed MVIF and CSA measurements on two separate occasions under the same conditions. Reliability was determined using paired samples t-tests, systematic bias ratio and ratio limits of agreement (RLoA), intra-class correlation (ICC) and coefficient of variation (CV). MVIF of the FDI muscle (mean ± s; 31.8 ± 7.6 N and 31.6 ± 7.3 N) was not different between trials (P = 0.63); RLoA between trials were 1.00 ×/÷ 1.09, ICC = 0.990 and CV = 3.22%. CSA of the FDI muscle (22.6 ± 6.9 and 22.9 ± 6.9 mm²) was also not different between trials (P = 0.31); RLoA between trials were 0.98 ×/÷ 1.19, ICC = 0.979 and CV = 6.61%. Force per unit CSA was not different between trials (1.49 ± 0.43 and 1.46 ± 0.44 N·mm²; P = 0.18), RLoA were 1.02 ×/÷ 1.17, ICC = 0.985 and CV = 5.76%. The techniques used to determine MVIF and CSA of the FDI muscle were reliable and can be combined to calculate force per unit CSA.

Test-retest reliability of a single isometric mid-thigh pull protocol to assess peak force and strength-endurance.

The purpose of this study was to examine the test-retest reliability of strength-endurance protocols using isometric mid-thigh pull (IMTP). Twenty-eight participants (23.2 ± 4.9 years) completed two protocols across four testing sessions. Protocol one consisted of 10 maximal IMTP tests lasting 5 seconds each with 10 seconds rest between. Protocol two consisted of a prolonged 60 second maximal IMTP. Data from protocol 1 was analysed in two ways; (a) use of the highest peak value from the first three IMTP efforts, and the lowest peak value from the final three IMTP efforts, and (b) use of the mean peak force from the first three IMTP efforts and mean peak force from the final three IMTP efforts. Data from protocol two used the highest and lowest peak values in the first- and final-15 seconds. Analyses revealed excellent reliability for peak force across all four testing sessions (ICC = 0.94), as well as good test-retest reliability for strength-endurance for protocol 1 (a; ICC = 0.81, b; ICC = 0.79). Test-retest reliability for protocol 2 was poor (ICC = 0.305). Bland-Altman bias values were smaller for protocol 1(a = -8.8 Nm, b = 21.7 Nm) compared to protocol 2 = (119.3 Nm). Our data suggest that 10 maximal IMTP tests performed as described herein is a reliable method for exercise professionals to assess both peak force and strength-endurance in a single, time-efficient protocol.

Gait and strength assessment following surgical repair by intramedullary nailing of isolated tibial shaft fracture.

The objective of the study was to evaluate the long-term strength and gait outcomes after intramedullary nailing of isolated tibial diaphyseal fractures. This retrospective cohort study was conducted at an academic Level I trauma center. Fifteen participants with isolated tibial diaphyseal fractures (OTA/AO 42) at least 2 years postoperative from intramedullary nailing (IMN) provided informed consent. The average age was 40 ± 14 (range, 24-69); there were nine men and six women. Knee flexion-extension strength data were collected. Temporal-spatial, kinematic, and kinetic gait parameters were measured and compared to historic control data. Participants completed the SF-36 and shortened musculoskeletal function assessment questionnaires. The mean length of follow-up between surgery and gait analysis was 6 ± 2 years. The fractured limb demonstrated deficits in quadriceps strength between 9.8% and 23.4% compared to the unaffected limb. Temporal-spatial parameters revealed slower walking speed, shorter stride length, decreased cadence, and shorter single-limb support time in the fractured limb. Altered kinematic and kinetic findings included a knee extension shift during stance, with an increased knee flexor moment demand and decreased total knee power during loading and midstance. These findings represent deficits in concentric and eccentric knee extensor activity. Additionally, the fractured limb demonstrated decreased ankle dorsiflexion during stance and diminished ankle push-off power. Long-term outcomes after IMN of tibial diaphyseal fractures demonstrate decreased quadriceps strength and altered gait parameters that may have implications to the high incidence of knee and ankle pain in the fractured limb.

A Systematic Review of Lower Limb Strength Tests Used in Elite Basketball.

BACKGROUND: Basketball players rely on their lower limb strength for speed and agility. Therefore, it is important for strength and conditioning coaches to seek methods to assess and develop lower limb strength. OBJECTIVES: This study aimed to identify tests and variables used to assess lower body strength among elite basketball players and to provide normative values for the commonly used strength tests. METHODS: A review of PubMed, MEDLINE, Scopus, and SPORTDiscus was performed following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis guidelines. The risk of bias was assessed using the Joanna Briggs Institute cross-sectional and cohort checklists. RESULTS: Among the twelve reviewed studies, seven strength tests and five outcome variables were used. The most frequently used lower limb strength tests were the back squat (nine studies) and isometric mid-thigh pull (IMTP) (three studies), both reporting one repetition maximum (1RM) and peak force metrics. The most frequently used lower limb strength test was the back squat among males and IMTP among females. CONCLUSIONS: Among elite basketball players, the back squat 1RM is the most used lower limb strength test. However, across studies, a large variability was evidenced, which suggests that lower limb testing procedures are heterogeneous in this population.

Reliability of a Flight Helmet-Attached Force Gauge in Measuring Isometric Neck Muscle Strength.

INTRODUCTION: Strong neck muscles may decrease the risk of flight-induced neck pain and possible disability among fast jet pilots. The purpose of this study was to examine the intra- and interrater reliability of a commercial force gauge attached to a pilot's helmet for measuring isometric force production of the neck muscles. METHODS: A total of 41 subjects performed maximal isometric cervical flexion, extension, and lateral flexion in two measurement sessions for intrarater reliability, and 31 of these subjects participated in a third session for measuring interrater reliability. Delayed muscle soreness and neck pain were assessed using the Visual Analog Scale before and after each measurement session. The intraclass correlation coefficient (ICC) was used to compare values between the test and retest assessments. RESULTS: The overall interrater reliability was good (ICC 0.79-0.90), whereas the intrarater reliability varied from moderate to good (ICC 0.58-0.84). In both intra- and interrater reliability, the flexion test had good (ICC 0.84-0.89) reliability, while the lateral flexion test results had moderate to good (ICC 0.73-0.90) reliability. The extension test had the lowest reliability in both intra- (ICC 0.58) and interrater (ICC 0.79) tests. The average visual analog scale score (from 1-100 scale) prior to the second measurement session was 16 ± 18 in delayed muscle soreness and 0 ± 0 in neck pain. DISCUSSION: The present study demonstrated that the helmet-attached force gauge is a reliable, safe, and clinically applicable method to evaluate isometric neck strength in the flexion and lateral flexion directions. Honkanen T, Mattila V, Kinnunen O, Janhunen M, Sovelius R, Vaara JP, Kyröläinen H. Reliability of a flight helmet-attached force gauge in measuring isometric neck muscle strength. Aerosp Med Hum Perform. 2024; 95(10):788-793.