Reconstructing Middle and Upper Paleolithic human mobility in Portuguese Estremadura through laser ablation strontium isotope analysis.

Understanding mobility and landscape use is important in reconstructing subsistence behavior, range, and group size, and it may contribute to our understanding of phenomena such as the dynamics of biological and cultural interactions between distinct populations of Upper Pleistocene humans. However, studies using traditional strontium isotope analysis are generally limited to identifying locations of childhood residence or nonlocal individuals and lack the sampling resolution to detect movement over short timescales. Here, using an optimized methodology, we present highly spatially resolved 87Sr/86Sr measurements made by laser ablation multicollector inductively coupled plasma mass spectrometry along the growth axis of the enamel of two marine isotope stage 5b, Middle Paleolithic Neanderthal teeth (Gruta da Oliveira), a Tardiglacial, Late Magdalenian human tooth (Galeria da Cisterna), and associated contemporaneous fauna from the Almonda karst system, Torres Novas, Portugal. Strontium isotope mapping of the region shows extreme variation in 87Sr/86Sr, with values ranging from 0.7080 to 0.7160 over a distance of c. 50 km, allowing short-distance (and arguably short-duration) movement to be detected. We find that the early Middle Paleolithic individuals roamed across a subsistence territory of approximately 600 km2, while the Late Magdalenian individual parsimoniously fits a pattern of limited, probably seasonal movement along the right bank of the 20-km-long Almonda River valley, between mouth and spring, exploiting a smaller territory of approximately 300 km2. We argue that the differences in territory size are due to an increase in population density during the Late Upper Paleolithic.

Male mastodon landscape use changed with maturation (late Pleistocene, North America).

Under harsh Pleistocene climates, migration and other forms of seasonally patterned landscape use were likely critical for reproductive success of mastodons (Mammut americanum) and other megafauna. However, little is known about how their geographic ranges and mobility fluctuated seasonally or changed with sexual maturity. We used a spatially explicit movement model that coupled strontium and oxygen isotopes from two serially sampled intervals (5+ adolescent years and 3+ adult years) in a male mastodon tusk to test for changes in landscape use associated with maturation and reproductive phenology. The mastodon's early adolescent home range was geographically restricted, with no evidence of seasonal preferences. Following inferred separation from the matriarchal herd (starting age 12 y), the adolescent male's mobility increased as landscape use expanded away from his natal home range (likely central Indiana). As an adult, the mastodon's monthly movements increased further. Landscape use also became seasonally structured, with some areas, including northeast Indiana, used only during the inferred mastodon mating season (spring/summer). The mastodon died in this area (>150 km from his core, nonsummer range) after sustaining a craniofacial injury consistent with a fatal blow from a competing male's tusk during a battle over access to mates. Northeast Indiana was likely a preferred mating area for this individual and may have been regionally significant for late Pleistocene mastodons. Similarities between mammutids and elephantids in herd structure, tusk dimorphism, tusk function, and the geographic component of male maturation indicate that these traits were likely inherited from a common ancestor.

Gelatin-mediated gallium-doped SrHA composite coatings with sequential antimicrobial and osteogenic functions for infected bone defect repair.

In this study, gallium- and gelatin-modified strontium-doped hydroxyapatite (SrHA-Gel-Ga) bilayer coatings were prepared on titanium substrates by electrodeposition and spin-coating techniques. The results showed that gallium and gelatin were uniformly doped into the SrHA coatings, which exhibited good hydrophilicity and bioactivity. Furthermore, SrHA-Gel-Ga demonstrated good antimicrobial properties against E. coli and S. aureus, especially S. aureus. The co-doping of Sr and gelatin in the coatings was effective in mitigating the cytotoxicity of Ga. SrHA-Gel-Ga was better able to promote the adhesion, proliferation and early differentiation of MC3T3-E1 cells. This study provides a new strategy for the development of anti-infective bone repair coatings.

Casein phosphopeptide/antimicrobial peptide co-modified SrTiO3 nanotubes for prevention of bacterial infections and repair of bone defects.

Endowing titanium surfaces with multifunctional properties can reduce implant-related infections and enhance osseointegration. In this study, titanium dioxide nanotubes with strontium doping (STN) were first created on the titanium surface using anodic oxidation and hydrothermal synthesis techniques. Next, casein phosphopeptide (CCP) and an antimicrobial peptide (HHC36) were loaded into the STN with the aid of vacuum physical adsorption (STN-CP-H), giving the titanium surface a dual function of "antimicrobial-osteogenic". The surface of STN-CP-H has a suitable roughness and good hydrophilicity, which is conducive to osteoblasts. STN-CP-H had a 99 % antibacterial rate against S. aureus and E. coli and effectively prevented the growth of bacterial biofilm. Meanwhile, the antibacterial mechanism of STN-CP-H was initially explored with the help of transcriptome sequencing technology. STN-CP-H could greatly increase osteoblast adhesion, proliferation, and expression of osteogenic markers (alkaline phosphatase, runt-related transcription) when CCP and Sr worked together synergistically. In vivo, the STN-CP-H coating could effectively promote new osteogenesis around titanium implant bone and had no toxic effects on heart, liver, spleen, lung and kidney tissues. A potential anti-infection bone healing material, STN-CP-H bifunctional coating developed in this work efficiently inhibited bacterial infection of titanium implants and encouraged early osseointegration.

Insights from Ca2+→Sr2+ substitution on the mechanism of O-O bond formation in photosystem II.

In recent years, there has been a steady interest in unraveling the intricate mechanistic details of water oxidation mechanism in photosynthesis. Despite the substantial progress made over several decades, a comprehensive understanding of the precise kinetics underlying O-O bond formation and subsequent evolution remains elusive. However, it is well-established that the oxygen evolving complex (OEC), specifically the CaMn4O5 cluster, plays a crucial role in O-O bond formation, undergoing a series of four oxidative events as it progresses through the S-states of the Kok cycle. To gain further insights into the OEC, researchers have explored the substitution of the Ca2+ cofactor with strontium (Sr), the sole atomic replacement capable of retaining oxygen-evolving activity. Empirical investigations utilizing spectroscopic techniques such as XAS, XRD, EPR, FTIR, and XANES have been conducted to probe the structural consequences of Ca2+→Sr2+ substitution. In parallel, the development of DFT and QM/MM computational models has explored different oxidation and protonation states, as well as variations in ligand coordination at the catalytic center involving amino acid residues. In this review, we critically evaluate and integrate these computational and spectroscopic approaches, focusing on the structural and mechanistic implications of Ca2+→Sr2+ substitution in PS II. We contribute DFT modelling and simulate EXAFS Fourier transforms of Sr-substituted OEC, analyzing promising structures of the S3 state. Through the combination of computational modeling and spectroscopic investigations, valuable insights have been gained, developing a deeper understanding of the photosynthetic process.

Trimester-Specific Urinary Strontium Concentrations during Pregnancy and Longitudinally Assessed Fetal Growth: Findings from a Prospective Cohort.

BACKGROUND: Studies have claimed that strontium (Sr) is associated with fetal growth, but the research evidence is insufficient. OBJECTIVES: Our study aimed to evaluate associations of trimester-specific urinary Sr concentrations with fetal growth parameters and birth size indicators. METHODS: In this prospective cohort, 9015 urine samples (first trimester: 3561, 2nd trimester: 2756, 3rd trimester: 2698) from 3810 mothers were measured for urinary Sr levels using inductively coupled plasma mass spectrometry (ICP-MS) and adjusted to urine specific gravity. We calculated standard deviation scores (SD-scores) for ultrasound-measured fetal growth parameters (head circumference, abdominal circumference, femur length, and estimated fetal weight) at 16, 24, 31, and 37 wk of gestation and birth size indicators (birth weight, birth length, and Ponderal index). Generalized linear models and generalized estimating equations models were used. Models were adjusted for potential covariates (gestational age, maternal age, body mass index, parity, passive smoking during pregnancy, education, folic acid supplements use, physical activity, maternal and paternal height, and infant sex). RESULTS: Positive associations of naturally logarithm-transformed Sr concentrations with fetal growth parameters and birth size indicators were observed. With each doubling increase in the urinary ln-Sr level in all 3 trimesters resulting in a percent change in SD-scores fetal growth parameters at 24, 31, and 37 wk of gestation and birth size indicators, 5.09%-8.23% in femur length, 7.57%-11.53% in estimated fetal weight, 6.56%-10.42% in abdominal circumference, 6.25% in head circumference, 5.15%-7.85% in birth weight, and 5.71%-9.39% in birth length, respectively. Most of the above statistical results could only be observed in male fetuses. CONCLUSIONS: Our findings suggest a potential association between Sr concentration and increased fetal growth, but these results and underlying mechanisms need further confirmation and clarification.

Use of strontium isotope ratios in potential geolocation of Ajnala skeletal remains: a forensic archeological study.

Stable isotope methods for provenance of unidentified human remains are relatively a newer field of enquiry in forensic archeology. It is of great interest for forensic experts these days. The application of strontium isotope analyses for estimating geolocation of archeological remains is of great interest in bioarcheology and modern forensics. The strontium (Sr) isotope composition of human bones and teeth has been widely used to reconstruct an individual's geo-affiliation, residential mobility, and migration history. Thousands of unknown human remains, reportedly belonging to 282 Indian soldiers of 26th Native Bengal regiment and killed in 1857, were exhumed non-scientifically from an abandoned well situated underneath a religious structure at Ajnala (Amritsar, India). Whether these remains belonged to the individuals, local or non-local to the site, was the important forensic archeological question to be answered by doing their thorough forensic anthropological examinations. In the present study, 27 mandibular teeth (18 s molars, 6 first molars, and 3 premolars) collected from the Ajnala skeletal assemblage were processed for strontium isotope analysis, and the measured ratios were compared with published isotope baseline data to estimate the locality status of these remains. The Sr isotopic values were concentrated in the range of 0.7175 to 0.7270. The comparative analysis of isotopic ratios revealed that most individuals buried in the Ajnala well have 87Sr/86Sr values close to the river as well as groundwater of the Gangetic plain (less radiogenic 87Sr/86Sr ~ 0.716); most likely originated near Varanasi (Uttar Pradesh, India) region, whereas the individuals with higher 87Sr/86Sr ratios (~ 0.7200) probably resided in the West Bengal and Bihar areas where the river as well as groundwater of the Gangetic plain is relatively more radiogenic. Thus, the strontium isotope results reveal that the Ajnala individuals did not grow up or live in the Amritsar region during their childhood, and this observation complemented the previous forensic anthropological and molecular findings. There is very little Indian data on the bioavailable strontium, so the inferences from the present study estimating Sr isotope abundances are expected to provide baseline data for future forensic provenance studies that will contribute to the global efforts of mapping Sr isotope variations by the isotope community.

Novel White Phosphor Bi3+ co-doped SrCeO3: 2 wt% Sm3+ Synthesized via Fuel Excess Gel Combustion Synthesis for wLED Applications.

Co-doping strategy is done if the emission from the activator is relatively low with existing excitation energy. Thus, to enrich the emission from an activator, the sensitizer like Bi3+ is co-doped onto the host and this intermediator transfers its emission energy to the activator. Prior to the study, no investigations had been conducted, marking the foundational exploration of the sensitizer effect within the rare earth-doped SrCeO3 matrix aimed at enhancing luminescence properties. The current study focuses on the innovation of single-phase robust white phosphors, SrCeO3: 2wt% Sm3+: xBi3+ (x = 0 wt%, 0.5 wt%, 1 wt%, 1.5 wt%, 2 wt%) to coat near UV LED chips for high CRI wLED applications. The novel perovskites were synthesized using a low-temperature fuel excess gel combustion method, utilizing citric acid as the fuel and ammonium nitrate as an extra oxidizer. Upon co-doping SrCeO3: 2wt% Sm3+ with bismuth, the impact of changing sensitizer concentration on both the development of crystalline phases, morphology, elemental composition, band gap energy, and the luminescent properties of ceramic powders were explored through X-ray diffraction, FE-SEM, Energy dispersive spectra, UV-visible absorption spectra, and photoluminescence characterization methods. The experimental results revealed the orthorhombic single-phase formation of SrCeO3: 2wt% Sm3+: xBi3+perovskites yielding high crystallinity and luminescence maximum at critical sensitizer concentration 1 wt% Bi3+. Also, the bright white light emission of all the perovskites was confirmed using the CIE color diagram. Thus, nano-perovskite SrCe0.97Sm0.02O3: 1wt% Bi3+ acts as an inevitable direct phosphor coating the near UV chip in LEDs, which can be a great revolution in energy savings applications.

Optimizing the White Light Emission of Pr3+ Activated SrCeO3 Perovskite by Controlling the Excitation Wavelength for High CRI wLED Applications.

The current research illustrates excitation energy-triggered photoluminescent characteristics of Pr3+ions in SrCeO3 providing a practical approach for developing high CRI wLED and its applications. SrCeO3: xPr3+ (x = 0, 0.005, 0.01, 0.02, 0.03 wt) perovskites synthesized by fuel excess gel combustion method generate high CRI (~98) for wLED applications. Crystalline phosphors with orthorhombic structures having space group Pnma were confirmed by XRD. The unit cell volume expansion occurred with an increase in Pr3+ concentration was verified through the Rietveld refinement technique. Surface morphology, particle distribution, and size were observed via FE-SEM imaging, and detected a well-defined regular distorted spherical structure with average grain size 0.826 µm for Pr3+ doped SrCeO3. Elemental mapping and EDS analysis identified the uniform distribution and elemental purity of SrCeO3: 0.01 Pr3+. Further, the molecular vibrations and modes were analyzed from the Raman spectrum. Moreover, the average particle size assessed via TEM analysis was found to be ~83.2 nm, consistent with XRD analysis. UV-visible absorption spectra for optical energy-band gap analysis showed a decrease in band gap energy with an increase in Pr3+ concentration, realizing an effective energy transfer from Ce4+ to Pr3+. PL measurements showed a huge variety of emission transitions, corresponding to excitations 290 nm, 321 nm, 373 nm, and 449 nm. The critical dopant concentration instigated by concentration quenching was 1 wt% Pr3+, ascribed to dipole-dipole interaction. The fluorescence lifetime of the optimal sample was 4.835 µs. Commission International de I'Eclairage (CIE) diagram exposes the white light emanation of SrCeO3: Pr3+. Among which white light with high CRI (~98) and comparably low CCT (~6311 K) was obtained for SrCeO3: 0.01 Pr3+ at 373 nm excitation. The obtained results recommend that SrCeO3: Pr3+ perovskite as an efficient white phosphor for fabricating high-performance wLEDs.

Sr/Ca ratios indicate frugivory versus folivory in primates: a case study using handheld XRF in Kibale National Park, Uganda.

Researchers often use trace element concentrations, including strontium-calcium ratios (Sr/Ca), to reconstruct paleodiets. While most commonly used as a proxy for meat consumption, a more appropriate application may be to differentiate frugivory from folivory. Sr/Ca ratios in animal tissue reflect the Sr/Ca ratios of the highest calcium components of that animal's diet. Because plants have much higher concentrations of calcium than meat, meat consumption signals are often overwhelmed by the variation in Sr/Ca ratios coming from different plant parts. This study uses faunal and plant data from Kibale National Park, a protected forest in southwestern Uganda home to numerous primate species (for example, common chimpanzees and baboons), to assess the reliability of Sr/Ca ratios to differentiate between primate dietary groups. We find that leaves consistently have higher strontium and calcium concentrations than fruits and that this is mirrored in higher Sr/Ca ratios in folivorous primates compared to frugivorous primates. Plant species differ widely in both their overall Sr/Ca ratios and the differences between their fruit and leaf Sr/Ca ratios, but this variation does not overwhelm the dietary signal separating frugivores and folivores. Furthermore, this research demonstrates that non-destructive and portable X-ray florescence (XRF) methods are an effective means of gathering Sr/Ca data from plant and faunal material, increasing the opportunities to apply such methods to fossil material in the future.

Molten salt mediated single-step synthesis of reusable nanostructured CaTiO3 for the removal and recovery of Sr2+: A potential adsorbent for the contaminated water bodies.

The facile synthesis approach for the adsorbent preparation and recyclability during decontamination of radioactive pollutants is a significant concern in water treatment. The objective of this study is to, synthesis via solid-state reaction of the nanostructured CaTiO3 for the removal and recovery of strontium (Sr2+) from the various water sources. The influence of the adsorption-dependent parameters including, initial concentration, adsorbent dose, pH, contact time and co-existing ions interference were investigated. The prepared adsorbent was characterized by different analytical techniques like FT-IR, SEM with EDAX, TEM, TGA-DTG, Powder XRD and BET surface analysis. The kinetic models were also used, and according to the kinetic models, a pseudo-second-order kinetic model (R2 = 0.999) was better fitted to the adsorption of Sr2+ ions onto CaTiO3 rather than pseudo-first-order kinetics, which could properly represent the observed adsorption of Sr2+. For the isotherm study, the results are best fitted to the Langmuir isotherm model (R2 = 0.98) with a maximum adsorption capacity of 102.04 mg/g. The common ions (Na+, Mg2+, Ca2+, and K+) and Sr2+ having a concentration of 1:2, 1:3, and 1:4, where 82.8, 79.5, and 68.2 % removal was achieved of Sr2+ in each respective matrix. In addition, the adsorption and corresponding recovery and removal for the different Sr2+spiked matrices in deionized water, tap water, well water, lake water, and seawater were investigated with 97, 65.6, 76.5, 73.9 and 17.8 % removal respectively. Also, the CaTiO3 showed excellent recyclability with minimal loss even after 5 consecutive recyclability cycles and >90% removal of strontium achieved. Hence, prepared nanostructured CaTiO3 could be considered a promising adsorbent for the removal and recovery of Sr2+ions from contaminated water bodies.

Effect of strontium on transcription factors identified by transcriptome analyses of bovine ruminal epithelial cells.

BACKGROUND: Strontium (Sr) has similar physicochemical properties as calcium (Ca) and is often used to evaluate the absorption of this mineral. Because the major route of Ca absorption in the bovine occurs in the rumen, it is essential to understand whether Sr impacts the ruminal epithelial cells and to what extent. RESULTS: In the present study, RNA sequencing and assembled transcriptome assembly were used to identify transcription factors (TFs), screening and bioinformatics analysis in bovine ruminal epithelial cells treated with Sr. A total of 1405 TFs were identified and classified into 64 families based on an alignment of conserved domains. A total of 174 differently expressed TFs (DE-TFs) were increased and 52 DE-TFs were decreased; the biological process-epithelial cell differentiation was inhibited according to the GSEA-GO analysis of TFs; The GO analysis of DE-TFs was enriched in the DNA binding. Protein-protein interaction network (PPI) found 12 hubs, including SMAD4, SMAD2, SMAD3, SP1, GATA2, NR3C1, PPARG, FOXO1, MEF2A, NCOA2, LEF1, and ETS1, which verified genes expression levels by real-time PCR. CONCLUSIONS: In this study, SMAD2, PPARG, LEF1, ETS1, GATA2, MEF2A, and NCOA2 are potential candidates that could be targeted by Sr to mediate cell proliferation and differentiation, as well as lipid metabolism. Hence, these results enhance the comprehension of Sr in the regulation of transcription factors and provide new insight into the study of Sr biological function in ruminant animals.

Lithium and strontium accumulation in native and invasive plants of the Sava River: Implications for bioindication and phytoremediation.

The objective of this study was to investigate the potential of native and invasive plant species for the uptake and accumulation of lithium (Li) and strontium (Sr) along the Sava River, focusing on their bioindication and phytoremediation capabilities. Sampling was carried out in riparian zones exposed to different pollution sources in Slovenia, Croatia, and Serbia. Plant samples of native (Salix alba, Populus alba, Populus nigra, Ulmus glabra, Juglans regia) and invasive (Amorpha fruticosa, Reynoutria japonica, Solidago canadensis, Impatiens glandulifera) species were collected. The content of Li and Sr was analyzed in the soils, roots, and leaves of the selected plants, as well as physical and chemical soil properties. Both Li and Sr content in the soils increased from the source to the mouth of the Sava River. The native species showed significant potential for Li and Sr accumulation based on the metal accumulation index. The highest Sr accumulation was measured in the leaves of Salix alba and the roots of Juglans regia, while the highest Li accumulation was measured in Ulmus glabra. Native species, especially Salix alba, proved to be better bioindicators of Li and Sr. Invasive species, especially Amorpha fruticosa and Impatiens glandulifera, showed a remarkable ability to translocate Sr and Li, respectively, to leaves. These results provide valuable insight into the suitability of plants for biomonitoring soil contamination and potential applications in phytoremediation strategies. In summary, the study shows the importance of native species in the context of the accumulation and bioindication of soil pollution.

Concentration-dependent luminescence characterization of terbium-doped strontium aluminate nanophosphors.

The present investigation describes the synthesis of luminescent terbium-doped strontium aluminate nanoparticles emitting bright green light, which were synthesized through a solid-state reaction method assisted by microwave radiation. Various samples containing different concentrations of Tb were synthesized, and an analysis of their structural and morphological features was conducted using powder x-ray diffraction, Fourier transform infrared spectroscopy and field emission scanning electron microscopy. The band gaps of the samples were determined utilizing the Kubelka-Munk method. The quenching mechanism observed was identified to be due to dipole-dipole interaction using the Dexter theory. The optimized sample with a terbium concentration of 4 at.% has a luminescence lifetime of 1.05 ms with 20.62% quantum efficiency. The results of this study indicate that the terbium-doped strontium aluminate fluorescent nanoparticles exhibit promising potential for a wide range of applications, including bioimaging, sensing and solid-state lighting.

Significant Oxygen Underestimation When Quantifying Barium-Doped SrTiO Layers by Atom Probe Tomography.

In this paper, the capability for quantifying the composition of Ba-doped SrTiO layers from an atom probe measurement was explored. Rutherford backscattering spectrometry and time-of-flight/energy elastic recoil detection were used to benchmark the composition where the amount of titanium was intentionally varied between samples. The atom probe results showed a significant divergence from the benchmarked composition. The cause was shown to be a significant oxygen underestimation (≳14 at%). The ratio between oxygen and titanium for the samples varied between 2.6 and 12.7, while those measured by atom probe tomography were lower and covered a narrower range between 1.4 and 1.7. This difference was found to be associated with the oxygen and titanium predominantly field evaporating together as a molecular ion. The evaporation fields and bonding chemistries determined showed inconsistencies for explaining the oxygen underestimation and ion species measured. The measured ion charge state was in excellent agreement with that predicted by the Kingham postionization theory. Only by considering the measured ion species, their evaporation fields, the coordination chemistry, the analysis conditions, and some recently reported density functional theory modeling for oxide field emission were we able to postulate a field emission and oxygen neutral desorption process that may explain our results.

G-quadruplex DNA-based colorimetric biosensor for the ultrasensitive visual detection of strontium ions using MnO2 nanorods as oxidase mimetics.

Strontium-90 (90Sr) is a major radioactive component that has attracted great attention, but its detection remains challenging since there are no specific energy rays indicative of its presence. Herein, a biosensor that is capable of rapidly detecting Sr2+ ions is demonstrated. Simple colorimetric method for sensitive detection of Sr2+ with the help of single-stranded DNA was developed by preparing MnO2 nanorods as oxidase mimic catalysis 3,3',5,5'-tetramethylbenzidine (TMB). Under weakly acidic conditions, MnO2 exhibited a strong oxidase-mimicking activity to oxidize colorless TMB into blue oxidation products (oxTMB) with discernible absorbance signals. Nevertheless, the introduction of a guanine-rich DNA aptamer inhibited MnO2-mediated TMB oxidation and reduced oxTMB formation, resulting in blue fading and diminished absorbance. Upon the addition of strontium ions to the system, the aptamers formed a stable G-quadruplex structure with strontium ions, thereby restoring the oxidase-mimicking activity of MnO2. Under the best experimental conditions, the absorbance exhibits a linear relationship with the Sr2+ concentration within the range 0.01-200 µM, with a limit of detection of 0.0028 µM. When the concentration of Sr2+ from 10-8 to 10-6 mol L-1, a distinct color change gradient could be observed in paper-based sensor. We successfully applied this approach to determine Sr2+ in natural water samples, obtaining recoveries ranging from 97.6 to 103% with a relative standard deviation of less than 5%. By providing technical solutions for detection, our work contributed to the effective monitoring of transportation of radioactive Sr in the environment.

Influence of Various Strontium Formulations (Ranelate, Citrate, and Chloride) on Bone Mineral Density, Morphology, and Microarchitecture: A Comparative Study in an Ovariectomized Female Mouse Model of Osteoporosis.

Osteoporosis stands out as a prevalent skeletal ailment, prompting exploration into potential treatments, including dietary strontium ion supplements. This study assessed the efficacy of supplementation of three strontium forms-strontium citrate (SrC), strontium ranelate (SrR), and strontium chloride (SrCl)-for enhancing bone structure in 50 female SWISS mice, aged seven weeks. In total, 40 mice underwent ovariectomy, while 10 underwent sham ovariectomy. Ovariectomized (OVX) mice were randomly assigned to the following groups: OVX (no supplementation), OVX + SrR, OVX + SrC, and OVX + SrCl, at concentrations equivalent to the molar amount of strontium. After 16 weeks, micro-CT examined trabeculae and cortical bones, and whole-bone strontium content was determined. Results confirm strontium administration increased bone tissue mineral density (TMD) and Sr content, with SrC exhibiting the weakest effect. Femur morphometry showed limited Sr impact, especially in the OVX + SrC group. This research highlights strontium's potential in bone health, emphasizing variations in efficacy among its forms.

Integrating otolith and genetic tools to reveal intraspecific biodiversity in a highly impacted salmon population.

Intraspecific biodiversity is vital for species persistence in an increasingly volatile world. By embracing methods that integrate information at different spatiotemporal scales, we can directly monitor and reconstruct changes in intraspecific biodiversity. Here we combined genetics and otolith biochronologies to describe the genotypic and phenotypic diversity of Chinook salmon (Oncorhynchus tshawytscha) in the Yuba River, California, comparing cohorts that experienced a range of hydroclimatic conditions. Yuba River salmon have been heavily impacted by habitat loss and degradation, and large influxes of unmarked hatchery fish each year have led to concern about introgression and uncertainty around the viability of its wild populations, particularly the rarer spring-run salmon. Otolith strontium isotopes showed that Yuba River origin fish represented, on average, 42% (range 7%-73%) of spawners across six return years (2009-2011, 2018-2020), with large interannual variability. The remainder of adult Chinook salmon in the river were primarily strays from the nearby Feather River hatchery, and since 2018 from the Mokelumne River hatchery. Among the Yuba-origin spawners, on average, 30% (range 14%-50%) exhibited the spring-run genotype. The Yuba-origin fish also displayed a variety of outmigration phenotypes that differed in the timing and size at which they left the Yuba river. Early-migrating fry dominated the returns (mean 59%, range 33%-89%), and their contribution rates were negatively correlated with freshwater flows. It is unlikely that fry survival rates are elevated during droughts, suggesting that this trend reflects disproportionately low survival of larger later migrating parr, smolts, and yearlings along the migratory corridor in drier years. Otolith daily increments indicated generally faster growth rates in non-natal habitats, emphasizing the importance of continuing upstream restoration efforts to improve in-river growing conditions. Together, these findings show that, despite a long history of habitat degradation and hatchery introgression, the Yuba River maintains intraspecific biodiversity that should be taken into account in future management, restoration, and reintroduction plans. The finding that genotypic spring-run are reproducing, surviving, and returning to the Yuba River every year suggests that re-establishment of an independent population is possible, although hatchery-wild interactions would need to be carefully considered. Integrating methods is critical to monitor changes in key genetic, physiological, and behavioral traits to assess population viability and resilience.

High H2O-Assisted Proton Conduction in One Highly Stable Sr(II)-Organic Framework Constructed by Tetrazole-Based Imidazole Dicarboxylic Acid.

Solid electrolyte materials with high structural stability and excellent proton conductivity (σ) have long been a popular and challenging research topic in the fuel cell field. This problem can be addressed because of the crystalline metal-organic frameworks' (MOFs') high structural stability, adjustable framework composition, and dense H-bonded networks. Herein, one highly stable Sr(II) MOF, {[Sr(H2tmidc)2(H2O)3]·4H2O}n (1) (H3tmidc = 2-(1H-tetrazolium-1-methylene)-1H-imidazole-4,5-dicarboxylic acid) was successfully fabricated, which was structurally characterized by single-crystal X-ray diffraction and electrochemically examined by the AC impedance determination. The results demonstrated that the σ of the compound manifested a positive dependence on temperature and humidity, and the optimal proton conductivity is as high as 1.22 × 10-2 S/cm under 100 °C and 98% relative humidity, which is at the forefront of reported MOFs with ultrahigh σ. The analysis of the proton conduction mechanism reveals that numerous tetrazolium groups, carboxyl groups, coordination, and crystallization water molecules in the framework are responsible for the high efficiency of proton transport. This work offers a fresh perspective on how to create novel crystalline proton conductive materials.

Response Properties of Electrorheological Composite Hydrophilic Elastomers Based on Different Morphologies of Magnesium-Doped Strontium Titanate.

As smart materials, electrorheological elastomers (EREs) formed by pre-treating active electrorheological particles are attracting more and more attention. In this work, four Mg-doped strontium titanate (Mg-STO) particles with spherical, dendritic, flake-like, and pinecone-like morphologies were obtained via hydrothermal and low-temperature co-precipitation. XRD, SEM, Raman, and FT-IR were used to characterize these products. The results showed that Mg-STOs are about 1.5-2.0 µm in size, and their phase structures are dominated by cubic crystals. These Mg-STOs were dispersed in a hydrogel composite elastic medium. Then, Mg-STO/glycerol/gelatin electrorheological composite hydrophilic elastomers were obtained with or without an electric field. The electric field response properties of Mg-doped strontium titanate composite elastomers were investigated. We concluded that dendritic Mg-STO composite elastomers are high-performance EREs, and the maximum value of their energy storage was 8.70 MPa. The significant electrorheological performance of these products is helpful for their applications in vibration control, force transducers, smart structures, dampers, and other fields.