Emergence of a Non-Van der Waals Magnetic Phase in a Van der Waals Ferromagnet.

Manipulation of long-range order in 2D van der Waals (vdW) magnetic materials (e.g., CrI3 , CrSiTe3 ,etc.), exfoliated in few-atomic layer, can be achieved via application of electric field, mechanical-constraint, interface engineering, or even by chemical substitution/doping. Usually, active surface oxidation due to the exposure in the ambient condition and hydrolysis in the presence of water/moisture causes degradation in magnetic nanosheets that, in turn, affects the nanoelectronic /spintronic device performance. Counterintuitively, the current study reveals that exposure to the air at ambient atmosphere results in advent of a stable nonlayered secondary ferromagnetic phase in the form of Cr2 Te3 (TC2 ≈160 K) in the parent vdW magnetic semiconductor Cr2 Ge2 Te6 (TC1 ≈69 K). The coexistence of the two ferromagnetic phases in the time elapsed bulk crystal is confirmed through systematic investigation of crystal structure along with detailed dc/ac magnetic susceptibility, specific heat, and magneto-transport measurement. To capture the concurrence of the two ferromagnetic phases in a single material, Ginzburg-Landau theory with two independent order parameters (as magnetization) with a coupling term can be introduced. In contrast to the rather common poor environmental stability of the vdW magnets, the results open possibilities of finding air-stable novel materials having multiple magnetic phases.

Contact Geometry-Dependent Excitonic Emission in Mixed-Dimensional van der Waals Heterostructures.

Manipulation of excitonic emission in two-dimensional (2D) materials via the assembly of van der Waals (vdW) heterostructures unlocks numerous opportunities for engineering their photonic and optoelectronic properties. In this work, we introduce a category of mixed-dimensional vdW heterostructures, integrating 2D materials with one-dimensional (1D) semiconductor nanowires composed of vdW layers. This configuration induces spatially distinct localized excitonic emissions through a tailored interfacial heterolayer atomic arrangement. By precisely adjusting both the axial and sidewall facet orientations of bottom-up grown PbI2 vdW nanowires and by transferring them onto 1L WSe2 flakes, we establish vdW heterointerfaces with either perpendicular or parallel interatomic arrangements. The edge-standing heterojunction, featuring perpendicular PbI2 layers atop WSe2, promotes efficient charge transfer through the edges and coupled localized states, leading to an enhanced redshifted excitonic emission. Conversely, the layer-by-layer heterointerface, where PbI2 layers are in parallel contact with WSe2, exhibits substantial quenching due to deep midgap states in a type-II alignment, as evidenced by power-dependent measurements and first-principle calculations. Our results introduce a method for actively manipulating excitonic emissions in 2D transition metal dichalcogenides (TMDs) through edge engineering, highlighting their potential in the development of various quantum devices.

Enabling Waveguide Optics in Rhombohedral-Stacked Transition Metal Dichalcogenides with Laser-Patterned Grating Couplers.

Waveguides play a key role in the implementation of on-chip optical elements and, therefore, lie at the heart of integrated photonics. To add the functionalities of layered materials to existing technologies, dedicated fabrication protocols are required. Here, we build on laser writing to pattern grating structures into bulk noncentrosymmetric transition metal dichalcogenides with grooves as sharp as 250 nm. Using thin flakes of 3R-MoS2 that act as waveguides for near-infrared light, we demonstrate the functionality of the grating couplers with two complementary experiments: first, nano-optical imaging is used to visualize transverse electric and magnetic modes, whose directional outcoupling is captured by finite element simulations. Second, waveguide second-harmonic generation is demonstrated by grating-coupling femtosecond pulses into the slabs in which the radiation partially undergoes frequency doubling throughout the propagation. Our work provides a straightforward strategy for laser patterning of van der Waals crystals, demonstrates the feasibility of compact frequency converters, and examines the tuning knobs that enable optimized coupling into layered waveguides.

Advancing Nanoelectronics Applications: Progress in Non-van der Waals 2D Materials.

Extending the inventory of two-dimensional (2D) materials remains highly desirable, given their excellent properties and wide applications. Current studies on 2D materials mainly focus on the van der Waals (vdW) materials since the discovery of graphene, where properties of atomically thin layers have been found to be distinct from their bulk counterparts. Beyond vdW materials, there are abundant non-vdW materials that can also be thinned down to 2D forms, which are still in their early stage of exploration. In this review, we focus on the downscaling of non-vdW materials into 2D forms to enrich the 2D materials family. This underexplored group of 2D materials could show potential promise in many areas such as electronics, optics, and magnetics, as has happened in the vdW 2D materials. Hereby, we will focus our discussion on their electronic properties and applications of them. We aim to motivate and inspire fellow researchers in the 2D materials community to contribute to the development of 2D materials beyond the widely studied vdW layered materials for electronic device applications. We also give our insights into the challenges and opportunities to guide researchers who are desirous of working in this promising research area.

Extracting the Strain Matrix and Twist Angle from the Moiré Superlattice in van der Waals Heterostructures.

When two atomic layers are brought into contact at a relative twist angle, a large-scale pattern, called a moiré superlattice, emerges due to the (angular or lattice) mismatch between the layers. This has profound consequences in terms of the Hamiltonian of the system but was also considered in several publications as a means to extract the local strain tensor. While extracting the twist angle based on knowledge of the periodicity of the moiré is trivial in the case of a regular moiré pattern, in many examples in the literature, that is not the case. In particular, extracting the strain tensor and twist angle maps from a spatially varying moiré pattern is not straightforward. This article aims to provide a practical tool to extract the strain tensor and twist angle from an experimentally observable pattern. It further addresses the limitation of any such approach in the absence of additional experimental information beyond the moiré superlattice pattern.

Engineering Optically Active Defects in Hexagonal Boron Nitride Using Focused Ion Beam and Water.

Hexagonal boron nitride (hBN) has emerged as a promising material platform for nanophotonics and quantum sensing, hosting optically active defects with exceptional properties such as high brightness and large spectral tuning. However, precise control over deterministic spatial positioning of emitters in hBN remained elusive for a long time, limiting their proper correlative characterization and applications in hybrid devices. Recently, focused ion beam (FIB) systems proved to be useful to engineer several types of spatially defined emitters with various structural and photophysical properties. Here we systematically explore the physical processes leading to the creation of optically active defects in hBN using FIB and find that beam-substrate interaction plays a key role in the formation of defects. These findings are confirmed using transmission electron microscopy, which reveals local mechanical deterioration of the hBN layers and local amorphization of ion beam irradiated hBN. Additionally, we show that, upon exposure to water, amorphized hBN undergoes a structural and optical transition between two defect types with distinctive emission properties. Moreover, using super-resolution optical microscopy combined with atomic force microscopy, we pinpoint the exact location of emitters within the defect sites, confirming the role of defected edges as primary sources of fluorescent emission. This lays the foundation for FIB-assisted engineering of optically active defects in hBN with high spatial and spectral control for applications ranging from integrated photonics, to nanoscale sensing, and to nanofluidics.

Emergent Multifunctional Magnetic Proximity in van der Waals Layered Heterostructures.

Proximity effect, which is the coupling between distinct order parameters across interfaces of heterostructures, has attracted immense interest owing to the customizable multifunctionalities of diverse 3D materials. This facilitates various physical phenomena, such as spin order, charge transfer, spin torque, spin density wave, spin current, skyrmions, and Majorana fermions. These exotic physics play important roles for future spintronic applications. Nevertheless, several fundamental challenges remain for effective applications: unavoidable disorder and lattice mismatch limits in the growth process, short characteristic length of proximity, magnetic fluctuation in ultrathin films, and relatively weak spin-orbit coupling (SOC). Meanwhile, the extensive library of atomically thin, 2D van der Waals (vdW) layered materials, with unique characteristics such as strong SOC, magnetic anisotropy, and ultraclean surfaces, offers many opportunities to tailor versatile and more effective functionalities through proximity effects. Here, this paper focuses on magnetic proximity, i.e., proximitized magnetism and reviews the engineering of magnetism-related functionalities in 2D vdW layered heterostructures for next-generation electronic and spintronic devices. The essential factors of magnetism and interfacial engineering induced by magnetic layers are studied. The current limitations and future challenges associated with magnetic proximity-related physics phenomena in 2D heterostructures are further discussed.

Deep Learning Analysis of Polaritonic Wave Images.

Deep learning (DL) is an emerging analysis tool across the sciences and engineering. Encouraged by the successes of DL in revealing quantitative trends in massive imaging data, we applied this approach to nanoscale deeply subdiffractional images of propagating polaritonic waves in complex materials. Utilizing the convolutional neural network (CNN), we developed a practical protocol for the rapid regression of images that quantifies the wavelength and the quality factor of polaritonic waves. Using simulated near-field images as training data, the CNN can be made to simultaneously extract polaritonic characteristics and material parameters in a time scale that is at least 3 orders of magnitude faster than common fitting/processing procedures. The CNN-based analysis was validated by examining the experimental near-field images of charge-transfer plasmon polaritons at graphene/α-RuCl3 interfaces. Our work provides a general framework for extracting quantitative information from images generated with a variety of scanning probe methods.

Spin-Selective Hole-Exciton Coupling in a V-Doped WSe2 Ferromagnetic Semiconductor at Room Temperature.

While valley polarization with strong Zeeman splitting is the most prominent characteristic of two-dimensional (2D) transition metal dichalcogenide (TMD) semiconductors under magnetic fields, enhancement of the Zeeman splitting has been demonstrated by incorporating magnetic dopants into the host materials. Unlike Fe, Mn, and Co, V is a distinctive dopant for ferromagnetic semiconducting properties at room temperature with large Zeeman shifting of band edges. Nevertheless, little known is the excitons interacting with spin-polarized carriers in V-doped TMDs. Here, we report anomalous circularly polarized photoluminescence (CPL) in a V-doped WSe2 monolayer at room temperature. Excitons couple to V-induced spin-polarized holes to generate spin-selective positive trions, leading to differences in the populations of neutral excitons and trions between left and right CPL. Using transient absorption spectroscopy, we elucidate the origin of excitons and trions that are inherently distinct for defect-mediated and impurity-mediated trions. Ferromagnetic characteristics are further confirmed by the significant Zeeman splitting of nanodiamonds deposited on the V-doped WSe2 monolayer.

Tuning of Optical Phonons in α-MoO3-VO2 Multilayers.

Merging the properties of VO2 and van der Waals (vdW) materials has given rise to novel tunable photonic devices. Despite recent studies on the effect of the phase change of VO2 on tuning near-field optical response of phonon polaritons in the infrared range, active tuning of optical phonons (OPhs) using far-field techniques has been scarce. Here, we investigate the tunability of OPhs of α-MoO3 in a multilayer structure with VO2. Our experiments show the frequency and intensity tuning of 2 cm-1 and 11% for OPhs in the [100] direction and 2 cm-1 and 28% for OPhs in the [010] crystal direction of α-MoO3. Using the effective medium theory and dielectric models of each layer, we verify these findings with simulations. We then use loss tangent analysis and remove the effect of the substrate to understand the origin of these spectral characteristics. We expect that these findings will assist in intelligently designing tunable photonic devices for infrared applications, such as tunable camouflage and radiative cooling devices.

Contact Engineering of Vertically Grown ReS2 with Schottky Barrier Modulation.

Forming metal contact with low contact resistance is essential for the development of electronics based on layered van der Waals materials. ReS2 is a semiconducting transition metal dichalcogenide (TMD) with an MX2 structure similar to that of MoS2. While most TMDs grow parallel to the substrate when synthesized using chemical vapor deposition (CVD), ReS2 tends to orient itself vertically during growth. Such a feature drastically increases the surface area and exposes chemically active edges, making ReS2 an attractive layered material for energy and sensor applications. However, the contact resistances of vertically grown materials are known to be relatively high, compared to those of common 2H-phase TMDs, such as MoS2. Most reported methods for lowering the contact resistance have been focused on exfoliated 2H-phase materials with only a few devices tested, and few works on distorted T-phase materials exist. Moreover, nearly all reported studies have been conducted on only a few devices with mechanically exfoliated fl Most reported methods for lowering the contact resistance have been 2 contacts was modulated by conformally coating a thin tunneling interlayer between the metal and the dendritic ReS2 film. Over a hundred devices were tested, and contact resistances were extracted for large-scale statistical analysis. Importantly, we compared various known materials and techniques for lowering contact resistance and found an optimized method. Finally, the reductions in barrier height were directly correlated with exponential reductions in contact resistance and increases in drive-current by almost 2 orders of magnitude.

Highly Stable Artificial Synapse Consisting of Low-Surface Defect van der Waals and Self-Assembled Materials.

The long-term plasticity of biological synapses was successfully emulated in an artificial synapse fabricated by combining low-surface defect van der Waals (vdW) and self-assembled (SA) materials. The synaptic operation could be achieved by facilitating hole trapping and releasing only via the amine (NH2) functional groups in 3-aminopropyltriethoxysilane, which consequently induced a gradual conductance change in the WSe2 channel. The vdW-SA synaptic device exhibited extremely stable long-term potentiation/depression (LTP/LTD) characteristics; its dynamic range and nonlinearity reproduced near 100 and 3.13/-6.53 (for LTP/LTD) with relative standard deviations (RSDs) below 2%. Furthermore, after conducting training and recognition tasks for the Modified National Institute of Standard and Technology (MNIST) digit patterns, we verified that the maximum recognition rate was 78.3%, and especially, its RSD was as low as 0.32% over several training/recognition cycles. This study provides a background for future research on advanced artificial synapses based on vdW and organic materials.

Highly Confined and Tunable Hyperbolic Phonon Polaritons in Van Der Waals Semiconducting Transition Metal Oxides.

2D van der Waals (vdW) layered polar crystals sustaining phonon polaritons (PhPs) have opened up new avenues for fundamental research and optoelectronic applications in the mid-infrared to terahertz ranges. To date, 2D vdW crystals with PhPs are only experimentally demonstrated in hexagonal boron nitride (hBN) slabs. For optoelectronic and active photonic applications, semiconductors with tunable charges, finite conductivity, and moderate bandgaps are preferred. Here, PhPs are demonstrated with low loss and ultrahigh electromagnetic field confinements in semiconducting vdW α-MoO3 . The α-MoO3 supports strong hyperbolic PhPs in the mid-infrared range, with a damping rate as low as 0.08. The electromagnetic confinements can reach ≈λ0 /120, which can be tailored by altering the thicknesses of the α-MoO3 2D flakes. Furthermore, spatial control over the PhPs is achieved with a metal-ion-intercalation strategy. The results demonstrate α-MoO3 as a new platform for studying hyperbolic PhPs with tunability, which enable switchable mid-infrared nanophotonic devices.