Characteristics and Correlations of Wall Shear Stress and Flow Turbulence in the Carotid Bifurcation Evaluated Using an Ultrasound Vector Flow Imaging.

INTRODUCTION: The aim of the study was to evaluate characteristics and provide the normal values of wall shear stress (WSS) and flow turbulence (Tur), and the relationship between them in the carotid bifurcation based on an ultrasound vector flow imaging (V Flow) in healthy adults. METHODS: Max and mean WSS and Tur values at three segments (initial segments of internal and external carotid arteries [IICA and IECA]; distal segment of common carotid artery [DCCA]), both in anterior and posterior walls, were successfully obtained in 56 healthy adults, using ultrasound V Flow function. Relationship between mean WSS and Tur was further explored. RESULTS: The mean WSS value was 0.71 Pa, 0.86 Pa, and 0.96 Pa at IICA, IECA, and DCCA, respectively (IICA < IECA < DCCA, p < 0.05). The mean Tur value was 13.85%, 5.46%, and 4.17% at IICA, IECA, and DCCA, respectively (IICA > IECA > DCCA, p < 0.05). A cutoff value (WSS = 0.4 Pa) was selected and Tur values were significantly higher in group with WSS cutoff value <0.4 Pa than group with WSS cutoff value ≥0.4 Pa (p < 0.01). CONCLUSION: WSS and Tur are moderately negatively correlated, which can be used in the quantitative evaluation of carotid bifurcation and could be a potential dual-parameter tool in the clinical research for early detection of carotid atherosclerosis.

Predicting vulnerable carotid plaques by detecting wall shear stress based on ultrasonic vector flow imaging.

OBJECTIVE: Carotid plaque vulnerability is a significant factor in the risk of cardiocerebrovascular events, with intraplaque neovascularization (IPN) being a crucial characteristic of plaque vulnerability. This study investigates the value of ultrasound vector flow imaging (V-flow) for measuring carotid plaque wall shear stress (WSS) in predicting the extent of IPN. METHODS: We enrolled 140 patients into three groups: 53 in the plaque group (72 plaques), 23 in the stenosis group (27 plaques), and 64 in the control group. V-flow was used to measure WSS parameters, including the average WSS (WSS mean) and the maximum WSS (WSS max), across three plaque locations: mid-upstream, maximum thickness, and mid-downstream. Contrast-enhanced ultrasound examination was used in 76 patients to analyze IPN and its correlation with WSS parameters. RESULTS: WSS max in the stenosis group was significantly higher than that in the control and plaque groups at the maximum thickness part (P < .05) and WSS mean in the stenosis group was significantly lower than that in the control group at the mid-upstream and mid-downstream segments (P < .05). WSS mean in the plaque group was significantly lower than that of the control group at all three locations (P < .05). Contrast-enhanced ultrasound examination revealed that plaques with neovascularization enhancement exhibited significantly higher WSS values (P < .05), with a positive correlation between WSS parameters and IPN enhancement grades, particularly WSS max at the thickest part (r = 0.508). Receiver operating characteristic curve analysis of WSS parameters for evaluating IPN showed that the efficacy of WSS max in evaluating IPN was better than that of WSS mean (P < .05), with an area under the curve of 0.7762 and 0.6973 (95% confidence intervals, 0.725-0.822 and 0.642-0.749, respectively). The cut-offs were 4.57 Pa and 1.12 Pa, sensitivities were 74.03% and 63.64%, and specificities were 75.00% and 68.18%. CONCLUSIONS: V-flow effectively measures WSS in carotid plaques. WSS max provides a promising metric for assessing IPN, offering potential insights into plaque characteristics and showing some potential in predicting plaque vulnerability.

The Role of Fluid Mechanics in Coronary Atherosclerotic Plaques: An Up-to-Date Review.

Most acute coronary syndromes are due to a sudden luminal embolism caused by the rupturing or erosion of atherosclerotic plaques. Prevention and treatment of plaque development have become an effective strategy to reduce mortality and morbidity from coronary heart disease. It is now generally accepted that plaques with thin-cap fibroatheroma (TCFA) are precursors to rupturing and that larger plaques and high-risk plaque features (including low-attenuation plaque, positive remodeling, napkin-ring sign, and spotty calcification) constitute unstable plaque morphologies. However, plaque vulnerability or rupturing is a complex evolutionary process caused by a combination of multiple factors. Using a combination of medicine, engineering mechanics, and computer software, researchers have turned their attention to computational fluid mechanics. The importance of fluid mechanics in pathological states for promoting plaque progression, inducing plaque tendency to vulnerability, or even rupture, as well as the high value of functional evaluation of myocardial ischemia has become a new area of research. This article reviews recent research advances in coronary plaque fluid mechanics, aiming to describe the concept, research implications, current status of clinical studies, and limitations of fluid mechanic's characteristic parameters: wall shear stress (WSS), axial plaque shear (APS), and fractional flow reserve (FFR). Previously, most computational fluid dynamics were obtained using invasive methods, such as intravascular ultrasound (IVUS) or optical coherence tomography (OCT). In recent years, the image quality and spatial resolution of coronary computed tomography angiography (CCTA) have greatly improved, making it possible to compute fluid dynamics by noninvasive methods. In the future, the combination of CCTA-based anatomical stenosis, plaque high-risk features, and fluid mechanics can further improve the prediction of plaque development, vulnerability, and risk of rupturing, as well as enabling noninvasive means to assess the degree of myocardial ischemia, thereby providing an important aid to guide clinical decision-making and optimize treatment.

Hemodynamic Parameters in the Parent Arteries of Unruptured Intracranial Aneurysms Depend on Aneurysm Size and Are Different Compared to Contralateral Arteries: A 7 Tesla 4D Flow MRI Study.

BACKGROUND: Different Circle of Willis (CoW) variants have variable prevalences of aneurysm development, but the hemodynamic variation along the CoW and its relation to presence and size of unruptured intracranial aneurysms (UIAs) are not well known. PURPOSE: Gain insight into hemodynamic imaging markers of the CoW for UIA development by comparing these outcomes to the corresponding contralateral artery without an UIA using 4D flow magnetic resonance imaging (MRI). STUDY TYPE: Retrospective, cross-sectional study. SUBJECTS: Thirty-eight patients with an UIA, whereby 27 were women and a mean age of 62 years old. FIELD STRENGTH/SEQUENCE: Four-dimensional phase-contrast (PC) MRI with a 3D time-resolved velocity encoded gradient echo sequence at 7 T. ASSESSMENT: Hemodynamic parameters (blood flow, velocity pulsatility index [vPI], mean velocity, distensibility, and wall shear stress [peak systolic (WSSMAX ), and time-averaged (WSSMEAN )]) in the parent artery of the UIA were compared to the corresponding contralateral artery without an UIA and were related to UIA size. STATISTICAL TESTS: Paired t-tests and Pearson Correlation tests. The threshold for statistical significance was P < 0.05 (two-tailed). RESULTS: Blood flow, mean velocity, WSSMAX , and WSSMEAN were significantly higher, while vPI was lower, in the parent artery relative to contralateral artery. The WSSMAX of the parent artery significantly increased linearly while the WSSMEAN decreased linearly with increasing UIA size. CONCLUSIONS: Hemodynamic parameters and WSS differ between parent vessels of UIAs and corresponding contralateral vessels. WSS correlates with UIA size, supporting a potential hemodynamic role in aneurysm pathology. LEVEL OF EVIDENCE: 2 TECHNICAL EFFICACY: Stage 2.

Multiyear Interval Changes in Aortic Wall Shear Stress in Patients with Bicuspid Aortic Valve Assessed by 4D Flow MRI.

BACKGROUND: In patients with bicuspid aortic valve (BAV), 4D flow MRI can quantify regions exposed to abnormal aortic hemodynamics, including high wall shear stress (WSS), a known stimulus for arterial wall dysfunction. However, the long-term multiscan reproducibility of 4D flow MRI-derived hemodynamic parameters is unknown. PURPOSE: To investigate the long-term stability of 4D flow MRI-derived peak velocity, WSS, and WSS-derived heatmaps in patients with BAV undergoing multiyear surveillance imaging. STUDY TYPE: Retrospective. POPULATION: 20 BAV patients (mean age 48.4 ± 13.9 years; 14 males) with five 4D flow MRI scans, with intervals of at least 6 months between scans, and 125 controls (mean age: 50.7 ± 15.8 years; 67 males). FIELD STRENGTH/SEQUENCE: 1.5 and 3.0T, prospectively ECG and respiratory navigator-gated aortic 4D flow MRI. ASSESSMENT: Automated AI-based 4D flow analysis pipelines were used for data preprocessing, aorta 3D segmentation, and quantification of ascending aorta (AAo) peak velocity, peak systolic WSS, and heatmap-derived relative area of elevated WSS compared to WSS ranges in age and sex-matched normative control populations. Growth rate was derived from the maximum AAo diameters measured on the first and fifth MRI scans. STATISTICAL TESTS: One-way repeated measures analysis of variance. P < 0.05 indicated significance. RESULTS: One hundred 4D flow MRI exams (five per patient) were analyzed. The mean total follow-up duration was 5.5 ± 1.1 years, and the average growth rate was 0.3 ± 0.2 mm/year. Peak velocity, peak systolic WSS, and relative area of elevated WSS did not change significantly over the follow-up period (P = 0.64, P = 0.69, and P = 0.35, respectively). The patterns and areas of elevated WSS demonstrated good reproducibility on semiquantitative assessment. CONCLUSION: 4D flow MRI-derived peak velocity, WSS, and WSS-derived heatmaps showed good multiyear and multiscan stability in BAV patients with low aortic growth rates. These findings underscore the reliability of these metrics in monitoring BAV patients for potential risk of dilation. LEVEL OF EVIDENCE: 3 TECHNICAL EFFICACY: Stage 1.

Regional Aortic Wall Shear Stress Increases over Time in Patients with a Bicuspid Aortic Valve.

BACKGROUND: Aortic wall shear stress (WSS) is a known predictor of ascending aortic growth in patients with a bicuspid aortic valve (BAV). The aim of this study was to study regional WSS and changes over time in BAV patients. METHODS: BAV patients and age-matched healthy controls underwent 4D flow CMR. Regional, peak systolic ascending aortic WSS, aortic valve function, aortic stiffness measures and aortic dimensions were assessed. In BAV patients, 4D flow CMR was repeated after three years follow-up and both at baseline and follow-up computed tomography angiography (CTA) was acquired. Aortic growth (volume increase of ≥5%) was measured on CTA. Regional WSS differences within patients' aorta and WSS changes over time were analysed using linear mixed-effect models and were associated with clinical parameters. RESULTS: Thirty BAV patients (aged 34 years [IQR 25-41]) were included in the follow-up analysis. Additionally, another 16 BAV patients and 32 healthy controls (aged 33 years [IQR 28-48]) were included for other regional analyses. Magnitude, axial, and circumferential WSS increased over time (all p<0.001) irrespective of aortic growth. The percentage of regions exposed to a magnitude WSS >95th percentile of healthy controls increased from 21% (baseline 506/2400 regions) to 31% (follow-up 734/2400 regions) (p<0.001). WSS angle, a measure of helicity near the aortic wall, decreased during follow-up. Magnitude WSS changes over time were associated with systolic blood pressure, peak aortic valve velocity, aortic valve regurgitation fraction, aortic stiffness indexes, and normalized flow displacement (all p<0.05). CONCLUSIONS: An increase of regional WSS over time was observed in BAV patients, irrespective of aortic growth. The increasing WSSs comprising a larger area of the aorta warrants further research to investigate the possible predictive value for aortic dissection.

Four-dimensional flow cardiovascular magnetic resonance aortic cross-sectional pressure changes and their associations with flow patterns in health and ascending thoracic aortic aneurysm.

BACKGROUND: Ascending thoracic aortic aneurysm (ATAA) is a silent and threatening dilation of the ascending aorta (AscAo). Maximal aortic diameter which is currently used for ATAA patients management and surgery planning has been shown to inadequately characterize risk of dissection in a large proportion of patients. Our aim was to propose a comprehensive quantitative evaluation of aortic morphology and pressure-flow-wall associations from four-dimensional (4D) flow cardiovascular magnetic resonance (CMR) data in healthy aging and in patients with ATAA. METHODS: We studied 17 ATAA patients (64.7 ± 14.3 years, 5 females) along with 17 age- and sex-matched healthy controls (59.7 ± 13.3 years, 5 females) and 13 younger healthy subjects (33.5 ± 11.1 years, 4 females). All subjects underwent a CMR exam, including 4D flow and three-dimensional anatomical images of the aorta. This latter dataset was used for aortic morphology measurements, including AscAo maximal diameter (iDMAX) and volume, indexed to body surface area. 4D flow MRI data were used to estimate 1) cross-sectional local AscAo spatial (∆PS) and temporal (∆PT) pressure changes as well as the distance (∆DPS) and time duration (∆TPT) between local pressure peaks, 2) AscAo maximal wall shear stress (WSSMAX) at peak systole, and 3) AscAo flow vorticity amplitude (VMAX), duration (VFWHM), and eccentricity (VECC). RESULTS: Consistency of flow and pressure indices was demonstrated through their significant associations with AscAo iDMAX (WSSMAX:r = -0.49, p < 0.001; VECC:r = -0.29, p = 0.045; VFWHM:r = 0.48, p < 0.001; ∆DPS:r = 0.37, p = 0.010; ∆TPT:r = -0.52, p < 0.001) and indexed volume (WSSMAX:r = -0.63, VECC:r = -0.51, VFWHM:r = 0.53, ∆DPS:r = 0.54, ∆TPT:r = -0.63, p < 0.001 for all). Intra-AscAo cross-sectional pressure difference, ∆PS, was significantly and positively associated with both VMAX (r = 0.55, p = 0.002) and WSSMAX (r = 0.59, p < 0.001) in the 30 healthy subjects (48.3 ± 18.0 years). Associations remained significant after adjustment for iDMAX, age, and systolic blood pressure. Superimposition of ATAA patients to normal aging trends between ∆PS and WSSMAX as well as VMAX allowed identifying patients with substantially high pressure differences concomitant with AscAo dilation. CONCLUSION: Local variations in pressures within ascending aortic cross-sections derived from 4D flow MRI were associated with flow changes, as quantified by vorticity, and with stress exerted by blood on the aortic wall, as quantified by wall shear stress. Such flow-wall and pressure interactions might help for the identification of at-risk patients.

Response and resilience of carbon nanotube micropillars to shear flow.

Interactions between carbon nanotubes (CNTs) and fluid flows are central to the operation of several emerging nanotechnologies. In this paper, we explore the fluid-structure interaction of CNT micropillars in wall-bounded shear flows, relevant to recently developed microscale wall shear stress sensors. We monitor the deformation of CNT micropillars in channel flow as the flow rate and wall shear stress are gradually varied. We quantify how the micropillars bend at low wall shear stress, and then will commonly tilt abruptly from their base above a threshold wall shear stress, which is attributed to the lower density of the micropillars in this region. Some micropillars are observed to flutter rapidly between a vertical and horizontal position around this threshold wall shear stress, before settling to a tilted position as wall shear stress increases further. Tilted micropillars are found to kink sharply near their base, similar to the observed buckling near the base of CNT micropillars in compression. Upon reducing the flow rate, micropillars are found to fully recover from a near horizontal position to a near vertical position, even with repeated on-off cycling. At sufficiently high wall shear stress, the micropillars were found to detach at the catalyst particle-substrate interface. The mechanical response of CNT micropillars in airflow revealed by this study provides a basis for future development efforts and the accurate simulation of CNT micropillar wall shear stress sensors.

Tortuosity and Proximal-Specific Hemodynamics Associated with Plaque Location in the Carotid Bulb Stenosis.

BACKGROUND: Atherosclerotic plaque locations in the carotid bulb increasingly have been found to be associated with patterns of ischemic lesions and plaque progression. However, the occurrence of carotid bulb plaque is a complex process. We aimed to investigate plaque characteristics and geometric and hemodynamic parameters among patients with body and apical plaques of the carotid bulb and to identify the mechanism of bulb plaque formation and location. METHODS: Consecutive patients with single carotid bulb stenosis (50-99%) were enrolled retrospectively. Patients were divided into body and apical plaque groups based on plaque location. Plaque location and characteristics were identified and measured on high-resolution vessel wall magnetic resonance imaging. Geometric parameters were derived from time-of-flight magnetic resonance imaging. Computational fluid dynamics simulations were performed to quantify wall shear stress (WSS) and four associated WSS-based metrics on the plaque side, on the non-plaque side, and in different parts of the lesion. Plaque characteristics and geometric and hemodynamic parameters were compared, and their associations with the plaque location were determined. RESULTS: Seventy patients were recruited (41 body plaques and 29 apical plaques). WSSplaque values were lower than WSSnon-plaque values for all plaques (median [interquartile range], 12.59 [9.83-22.14] vs. 17.27 [11.63-27.63] Pa, p = 0.001). In a multivariate binary logistic regression, the tortuosity of the stenosed region, the magnitudes of the mean relative residence time, and the minimum transverse WSS in the proximal part of the lesion were the key factors independently associated with plaque location (p = 0.022, 0.013, and 0.012, respectively). CONCLUSIONS: Plaque formation was associated with the local flow pattern, and the tortuosity and proximal-specific hemodynamics were significantly associated with plaque location in the carotid bulb.

Image-based insilico investigation of hemodynamics and biomechanics in healthy and diabetic human retinas.

Retinal hemodynamics and biomechanics play a significant role in understanding the pathophysiology of several ocular diseases. However, these parameters are significantly affected due to changed blood vessel morphology ascribed to pathological conditions, particularly diabetes. In this study, an image-based computational fluid dynamics (CFD) model is applied to examine the effects of changed vascular morphology due to diabetes on blood flow velocity, vorticity, wall shear stress (WSS), and oxygen distribution and compare it with healthy. The 3D patient-specific vascular architecture of diabetic and healthy retina is extracted from Optical Coherence Tomography Angiography (OCTA) images and fundus to extract the capillary level information. Further, Fluid-structure interaction (FSI) simulations have been performed to compare the induced tissue stresses in diabetic and healthy conditions. Results illustrate that most arterioles possess higher velocity, vorticity, WSS, and lesser oxygen concentration than arteries for healthy and diabetic cases. However, an opposite trend is observed for venules and veins. Comparisons show that, on average, the blood flow velocity in the healthy case decreases by 42 % in arteries and 21 % in veins, respectively, compared to diabetic. In addition, the WSS and von Mises stress (VMS) in healthy case decrease by 49 % and 72 % in arteries and by 6 % and 28 % in veins, respectively, when compared with diabetic, making diabetic blood vessels more susceptible to wall rupture and tissue damage. The in-silico results may help predict the possible abnormalities region early, helping the ophthalmologists use these estimates as prognostic tools and tailor patient-specific treatment plans.

Four-Dimensional Flow MRI-Derived Hemodynamics in Abdominal Aortic Aneurysms: Reproducibility and Associations With Diameter, Intraluminal Thrombus Volume, and Vorticity.

BACKGROUND: Maximum diameter measurements are used to assess the rupture risk of abdominal aortic aneurysms (AAAs); however, these are not precise enough to predict all ruptures. Four-dimensional (4D) flow MRI-derived parameters provide additional information by visualizing hemodynamics in AAAs but merit further investigation before they are clinically applicable. PURPOSE: To assess the reproducibility of 4D flow MRI-derived hemodynamics, to investigate possible correlations with lumen and maximum diameter, and to explore potential relationships with vorticity and aneurysm growth. STUDY TYPE: Prospective single-arm study. POPULATION: A total of 22 (71.5 ± 6.1 years, 20 male) asymptomatic AAA patients with a maximum diameter of at least 30 mm. FIELD STRENGTH/SEQUENCE: A 3.0 T/Free-breathing 4D flow MRI phase-contrast acquisition with retrospective ECG-gating. ASSESSMENT: Patients underwent two consecutive 4D flow MRI scans 1-week apart. Aortic volumes were segmented from time-averaged phase contrast magnetic resonance angiographies. Reproducibility was assessed by voxelwise analysis after registration. Mean flow velocity, mean wall shear stress (WSS), mean lumen diameter, and qualitative vorticity scores were assessed. In addition, Dixon MRI and retrospective surveillance data were used to study maximum diameter (including thrombus), intraluminal thrombus volume (ILT), and growth rate. STATISTICAL TESTS: For reproducibility assessment, Bland-Altman analyses, Pearson correlation, Spearman's correlation, and orthogonal regression were conducted. Potential correlations between hemodynamics and vorticity scores were assessed using linear regression. P < 0.05 was considered statistically significant. RESULTS: Test-retest median Pearson correlation coefficients for flow velocity and WSS were 0.85 (IQR = 0.08) m/sec and 0.82 (IQR = 0.10) Pa, respectively. Mean WSS significantly correlated with mean flow velocity (R = 0.75) and inversely correlated with mean lumen diameter (R = -0.73). No significant associations were found between 4D flow MRI-derived hemodynamic parameters and maximum diameter (flow velocity: P = 0.98, WSS: P = 0.22). DATA CONCLUSION: A 4D flow MRI is robust for assessing the hemodynamics within AAAs. No correlations were found between hemodynamic parameters and maximum diameter, ILT volume and growth rate. LEVEL OF EVIDENCE: 2 TECHNICAL EFFICACY: Stage 2.

Modification of the swirling well cell culture model to alter shear stress metrics.

Effects of hemodynamic shear stress on endothelial cells have been extensively investigated using the "swirling well" method, in which cells are cultured in dishes or multiwell plates placed on an orbital shaker. A wave rotates around the well, producing complex patterns of shear. The method allows chronic exposure to flow with high throughput at low cost but has two disadvantages: a number of shear stress characteristics change in a broadly similar way from the center to the edge of the well, and cells at one location in the well may release mediators into the medium that affect the behavior of cells at other locations, exposed to different shears. These properties make it challenging to correlate cell properties with shear. The present study investigated simple alterations to ameliorate these issues. Flows were obtained by numerical simulation. Increasing the volume of fluid in the well-altered dimensional but not dimensionless shear metrics. Adding a central cylinder to the base of the well-forced fluid to flow in a square toroidal channel and reduced multidirectionality. Conversely, suspending a cylinder above the base of the well made the flow highly multidirectional. Increasing viscosity in the latter model increased the magnitude of dimensional but not dimensionless metrics. Finally, tilting the well changed the patterns of different wall shear stress metrics in different ways. Collectively, these methods allow similar flows over most of the cells cultured and/or allow the separation of different shear metrics. A combination of the methods overcomes the limitations of the baseline model.

Localized Elevation of Wall Shear Stress Is Linked to Recent Symptoms in Patients with Carotid Stenosis.

BACKGROUND: Estimation of symptomatic and asymptomatic carotid atherosclerosis differences can be the basis for prevention and management of carotid artery stenosis disease. In clinical practice, carotid plaque vulnerability is assessed only on the basis of luminal stenosis. However, the evolution of carotid plaque from an asymptomatic state to a symptomatic one is a complex process and the underlying hemodynamic mechanisms are unknown. We aimed to investigate the differences in hemodynamic parameters between patients with recently symptomatic carotid stenosis and asymptomatic ones. METHODS: Hemodynamic simulations were performed on 26 carotid plaques from 25 patients with carotid artery stenosis ≥50%, 16 of whom had recent cerebrovascular ischemic events. Using human-specific flow parameters and 3D reconstruction of carotid computed tomography angiography images, we assessed hemodynamic characteristics such as wall shear stress (WSS), time-averaged WSS (TAWSS), oscillatory shear index, and relative residence time (RRT) during the cardiac cycle in patients with and without symptoms. RESULTS: We found that symptomatic carotid stenosis patients had greater local TAWSS (99.59 ± 26.29 vs. 60.40 ± 20.46 dyn/cm2, p = 0.0007) and maximal WSS (116.65 ± 39.11 vs. 68.28 ± 23.67 dyn/cm2, p = 0.003), but lower RRT (0.019 ± 0.006 vs. 0.013 ± 0.069 s, p = 0.049), than asymptomatic patients, but this hemodynamic difference was not associated with carotid stenosis severity (p = 0.70). Patients with transient ischemic attack (TIA) or stroke had higher local TAWSS and WSSmax than patients with asymptomatic stenosis (p < 0.05). Subgroup analysis showed that there was no statistical difference in local hemodynamic variables between TIA and stroke patients with carotid artery stenosis. CONCLUSIONS: Patients with carotid artery stenosis are more likely to experience acute ischemic cerebrovascular accidents if they have higher WSS. Simultaneous assessment with hemodynamic parameters like WSS along with stenosis severity may aid risk stratification in patients with asymptomatic carotid artery stenosis.

Geometric versus Hemodynamic Indexes for Rupture-Destined Aneurysms: A Retrospective Cohort and a Repeated-Measures Study.

INTRODUCTION: A proper stratification of intracranial aneurysms is critical in identifying rupture-destined aneurysms and unruptured intracranial aneurysms. We aimed to determine the utility of geometric and hemodynamic indexes in differentiating two types of aneurysms and to examine the characteristics of natural evolutionary changes of unruptured aneurysms. METHODS: Rupture-destined aneurysm refers to an aneurysm that undergoes subsequent aneurysmal subarachnoid hemorrhage (SAH). On the other hand, an unruptured intracranial aneurysm is characterized by an aneurysm that does not experience rupture during serial time-of-flight magnetic resonance angiography (TOF-MRA). In addition to geometric indexes, signal intensity gradient (SIG), an in vivo approximated wall shear stress from TOF-MRA, was measured in aneurysms. The difference between the maximum and minimum values of SIG in an aneurysm compared to parent arterial values was designated as the delta-SIG ratio. RESULTS: This study analyzed 20 rupture-destined aneurysms in 20 patients and 45 unruptured intracranial aneurysms in 41 patients with follow-up TOF-MRA. While geometric indexes did not show differences between the two groups, the delta-SIG ratio was higher in the rupture-destined aneurysms (1.5 ± 0.6 vs. 1.1 ± 0.3, p = 0.032). The delta-SIG ratio showed a higher area under the receiver operating characteristic curve for SAH than the size ratio (0.72 [95% CI, 0.58-0.87] vs. 0.56 [95% CI, 0.41-0.72], p = 0.033). The longitudinal re-examination of TOF-MRA in the unruptured intracranial aneurysms revealed evidence of aneurysmal growth, while concurrently exhibiting hemodynamic stability. CONCLUSION: The delta-SIG ratio showed higher discriminatory results between the two groups compared to geometric indexes. Aneurysmal rupture risk should be assessed by considering both geometric and hemodynamic information. This study was registered on ClinicalTrials.gov (NCT05450939).

Computational Fluid Dynamics for the Prediction of Endograft Thrombosis in the Superficial Femoral Artery.

PURPOSE: Contemporary diagnostic modalities, including contrast-enhanced computed tomography (CTA) and duplex ultrasound, have been insufficiently able to predict endograft thrombosis. This study introduces an implementation of image-based computational fluid dynamics (CFD), by exemplification with 4 patients treated with an endograft for occlusive disease of the superficial femoral artery (SFA). The potential of personalized CFD for predicting endograft thrombosis is investigated. MATERIALS AND METHODS: Four patients treated with endografts for an occluded SFA were retrospectively included. CFD simulations, based on CTA and duplex ultrasound, were compared for patients with and without endograft thrombosis to investigate potential flow-related causes of endograft thrombosis. Time-averaged wall shear stress (TAWSS) was computed, which highlights areas of prolonged residence times of coagulation factors in the graft. RESULTS: CFD simulations demonstrated normal TAWSS (>0.4 Pa) in the SFA for cases 1 and 2, but low levels of TAWSS (<0.4 Pa) in cases 3 and 4, respectively. Primary patency was achieved in cases 1 and 2 for over 2 year follow-up. Cases 3 and 4 were complicated by recurrent endograft thrombosis. CONCLUSION: The presence of a low TAWSS was associated with recurrent endograft thrombosis in subjects with otherwise normal anatomic and ultrasound assessment and a good distal run-off.

Repeatability and reproducibility of various 4D Flow MRI postprocessing software programs in a multi-software and multi-vendor cross-over comparison study.

BACKGROUND: Different software programs are available for the evaluation of 4D Flow cardiovascular magnetic resonance (CMR). A good agreement of the results between programs is a prerequisite for the acceptance of the method. Therefore, the goal was to compare quantitative results from a cross-over comparison in individuals examined on two scanners of different vendors analyzed with four postprocessing software packages. METHODS: Eight healthy subjects (27 ± 3 years, 3 women) were each examined on two 3T CMR systems (Ingenia, Philips Healthcare; MAGNETOM Skyra, Siemens Healthineers) with a standardized 4D Flow CMR sequence. Six manually placed aortic contours were evaluated with Caas (Pie Medical Imaging, SW-A), cvi42 (Circle Cardiovascular Imaging, SW-B), GTFlow (GyroTools, SW-C), and MevisFlow (Fraunhofer Institute MEVIS, SW-D) to analyze seven clinically used parameters including stroke volume, peak flow, peak velocity, and area as well as typically scientifically used wall shear stress values. Statistical analysis of inter- and intrareader variability, inter-software and inter-scanner comparison included calculation of absolute and relative error (ER), intraclass correlation coefficient (ICC), Bland-Altman analysis, and equivalence testing based on the assumption that inter-software differences needed to be within 80% of the range of intrareader differences. RESULTS: SW-A and SW-C were the only software programs showing agreement for stroke volume (ICC = 0.96; ER = 3 ± 8%), peak flow (ICC: 0.97; ER = -1 ± 7%), and area (ICC = 0.81; ER = 2 ± 22%). Results from SW-A/D and SW-C/D were equivalent only for area and peak flow. Other software pairs did not yield equivalent results for routinely used clinical parameters. Especially peak maximum velocity yielded poor agreement (ICC ≤ 0.4) between all software packages except SW-A/D that showed good agreement (ICC = 0.80). Inter- and intrareader consistency for clinically used parameters was best for SW-A and SW-D (ICC = 0.56-97) and worst for SW-B (ICC = -0.01-0.71). Of note, inter-scanner differences per individual tended to be smaller than inter-software differences. CONCLUSIONS: Of all tested software programs, only SW-A and SW-C can be used equivalently for determination of stroke volume, peak flow, and vessel area. Irrespective of the applied software and scanner, high intra- and interreader variability for all parameters have to be taken into account before introducing 4D Flow CMR in clinical routine. Especially in multicenter clinical trials a single image evaluation software should be applied.

Potential relationship between high wall shear stress and plaque rupture causing acute coronary syndrome.

The relationship between high wall shear stress (WSS) and plaque rupture (PR) in longitudinal and circumferential locations remains uncertain. Overall, 100 acute coronary syndrome patients whose culprit lesions had PR, documented by optical coherence tomography (OCT), were enrolled. Lesion-specific three-dimensional coronary artery models were created using OCT data. WSS was computed with computational fluid dynamics analysis. PR was classified into upstream-PR, minimum lumen area-PR, and downstream-PR according to the PR's longitudinal location, and into central-PR and lateral-PR according to the disrupted fibrous cap circumferential location. In the longitudinal 3-mm segmental analysis, multivariate analysis demonstrated that higher WSS in the upstream segment was independently associated with upstream-PR, and thinner fibrous cap was independently associated with downstream-PR. In the PR cross-sections, the PR region had a significantly higher average WSS than non-PR region. In the cross-sectional analysis, the in-lesion peak WSS was frequently observed in the lateral (66.7%) and central regions (70%) in lateral-PR and central-PR, respectively. Multivariate analysis demonstrated that the presence of in-lesion peak WSS at the lateral region, thinner broken fibrous cap, and larger lumen area were independently associated with lateral-PR, while the presence of in-lesion peak WSS at the central region and thicker broken fibrous cap were independently associated with central-PR. In conclusion, OCT-based WSS simulation revealed that high WSS might be related to the longitudinal and circumferential locations of PR.

Near-wall hemodynamic parameters quantification in in vitro intracranial aneurysms with 7 T PC-MRI.

OBJECTIVE: Wall shear stress (WSS) and its derived spatiotemporal parameters have proven to play a major role on intracranial aneurysms (IAs) growth and rupture. This study aims to demonstrate how ultra-high field (UHF) 7 T phase contrast magnetic resonance imaging (PC-MRI) coupled with advanced image acceleration techniques allows a highly resolved visualization of near-wall hemodynamic parameters patterns in in vitro IAs, paving the way for more robust risk assessment of their growth and rupture. MATERIALS AND METHODS: We performed pulsatile flow measurements inside three in vitro models of patient-specific IAs using 7 T PC-MRI. To this end, we built an MRI-compatible test bench, which faithfully reproduced a typical physiological intracranial flow rate in the models. RESULTS: The ultra-high field 7 T images revealed WSS patterns with high spatiotemporal resolution. Interestingly, the high oscillatory shear index values were found in the core of low WSS vortical structures and in flow stream intersecting regions. In contrast, maxima of WSS occurred around the impinging jet sites. CONCLUSIONS: We showed that the elevated signal-to-noise ratio arising from 7 T PC-MRI enabled to resolve high and low WSS patterns with a high degree of detail.

Influence of the Anatomical Structure on the Hemodynamics of Iliac Vein Stenosis.

Few reports study the effects of the anatomical structure of the iliac vein on hemodynamics and the methods to reduce and delay in-stent thrombosis. The anatomical structure of iliac vein stenosis was used to establish vascular models with different stenosis rates, taper angle, and left branch tilt angle in the work. The influence of anatomical structure on hemodynamics was revealed through theoretical research and in vitro experimental verification. A real iliac vein model was built based on computed tomography angiography (CTA) images, and hemorheological parameters including time-averaged wall shear stress (TAWSS), oscillatory shear index (OSI) and relative residence time (RRT) were analyzed by computational fluid dynamics (CFD). The results showed that iliac vein stenosis could significantly increase the wall shear stress (WSS) of the blood vessels at the stenosis site and outside the intersection area, which was easy to produce eddy currents in the distal blood vessels. With the increased taper angle, the proportion of low-wall shear stress areas and the risk of thrombosis increased. A small tilt angle could aggravate the influence of narrow blood vessels on the blood flow characteristics and vascular wall. The numerical simulation results were consistent with the theoretical research results, and the experimental study verified the correctness of the simulation. The work is helpful to further understand the hemodynamic characteristics of the iliac vein, providing a scientific reference for clinical treatment and diagnosis.

The Stress Phase Angle Measurement Using Spectral Domain Optical Coherence Tomography.

The stress phase angle (SPA), defined as the temporal phase angle between circumferential stress (CS) in the arterial wall and wall shear stress (WSS), is utilized to investigate the interactions between CS and WSS. SPA serves as an important parameter for the early diagnosis of cardiovascular disease. In this study, we proposed a novel method for measuring SPA using spectral domain optical coherence tomography (SD-OCT). The multi-M-mode scan strategy is adopted for interference spectrum acquisition. The phases of CS and WSS are extracted from the corresponding structural and flow velocity images of SD-OCT. The method is validated by measuring SPA in the outflow tract (OFT) of chick embryonic hearts and the common carotid artery of mice. To the best of our knowledge, this is the first time that OCT has been used for SPA measurement.