A qualitative assessment of safe work practices in logging in the southern United States.

BACKGROUND: The logging industry is recognized as one of the most dangerous professions in the U.S., but little is known about safety management practices on remote logging sites. METHODS: A total of six focus group sessions were held among logging supervisors and front line crew members in Arkansas, Louisiana, and Texas (N = 27 participants). RESULTS: Participants perceived that logging was a dangerous profession, but its risks had been mitigated in several ways, most notably through mechanization of timber harvesting. Log trucking-related incidents were widely identified as the primary source of risk for injury and death on logging work sites. Human error, in general, and being out of the machinery on the work site were highlighted as additional sources of risk. CONCLUSIONS: Participants indicated high levels of personal motivation to work in a safe manner but tended to underestimate workplace hazards and expressed widely varying levels of co-worker trust. Am. J. Ind. Med. 60:58-68, 2017. © 2016 Wiley Periodicals, Inc.

Kickback risk of portable chainsaws while cutting wood of different properties: laboratory tests and deductions.

Portable chainsaws are associated with substantial risk and can cause serious injury to operators, especially during kickback. This paper presents new results from research and analyses conducted regarding the impact between the different properties of wood on this occurrence. In an open area, such differences may include: wood species, humidity, temperature and the facing angle of the wood fibres in relation to the kerf and shape of the wood surface that comes in contact with the tip of the guide bar. This paper investigates chainsaw kickback including the research results on kickback and wood-cutting energy, saw chain speed and the efficiency of the chainsaw engine. It also presents conclusions drawn from the tests that can be useful for chainsaw users, showing the dependencies between the different properties of wood and the risk of injury.

Exposure of mobile chipper operators to diesel exhaust.

The current boom of forest biomass is making mobile chippers increasingly popular among forest operators. This motivates concern about the potential exposure of chipper operators to noxious chemicals derived from diesel fuel combustion. The objective of this study was to determine operator exposure to BTEX (benzene, toluene, ethylbenzene, and xylenes) and polycyclic aromatic hydrocarbons (PAHs) generated from diesel combustion. This study sampled 28 mobile chipping operations in the Italian mountains, in order to determine professional exposure to BTEX and PAHs among chipper operators. IOM, Radiello®, and XAD2 samplers were used for the purpose. Operations were divided into industrial and small scale, the former based on powerful chippers with enclosed cabs and the latter on smaller machines without enclosed cabs. We could not detect any measurable exposure to BTEX, while exposure levels for PAHs were very low, especially for what concerned recognized cancer agents. That is likely related to work environment and organization because mobile chippers work in the open-air forest environment and in the presence of very few other machines. PAH concentration was significantly higher inside cabs than outside. None of the operators involved in this research was exposed to BTEX or PAHs above occupational exposure limits.

Dose-response relationship between hand-transmitted vibration and hand-arm vibration syndrome in a tropical environment.

OBJECTIVES: The dose-response relationship for hand-transmitted vibration has been investigated extensively in temperate environments. Since the clinical features of hand-arm vibration syndrome (HAVS) differ between the temperate and tropical environment, we conducted this study to investigate the dose-response relationship of HAVS in a tropical environment. METHODS: A total of 173 male construction, forestry and automobile manufacturing plant workers in Malaysia were recruited into this study between August 2011 and 2012. The participants were interviewed for history of vibration exposure and HAVS symptoms, followed by hand functions evaluation and vibration measurement. Three types of vibration doses-lifetime vibration dose (LVD), total operating time (TOT) and cumulative exposure index (CEI)-were calculated and its log values were regressed against the symptoms of HAVS. The correlation between each vibration exposure dose and the hand function evaluation results was obtained. RESULTS: The adjusted prevalence ratio for finger tingling and numbness was 3.34 (95% CI 1.27 to 8.98) for subjects with lnLVD≥20 ln m(2) s(-4) against those <16 ln m(2) s(-4). Similar dose-response pattern was found for CEI but not for TOT. No subject reported white finger. The prevalence of finger coldness did not increase with any of the vibration doses. Vibrotactile perception thresholds correlated moderately with lnLVD and lnCEI. CONCLUSIONS: The dose-response relationship of HAVS in a tropical environment is valid for finger tingling and numbness. The LVD and CEI are more useful than TOT when evaluating the dose-response pattern of a heterogeneous group of vibratory tools workers.

Determining the exposure of chipper operators to inhalable wood dust.

The study surveyed wood chipping operations in order to determine the exposure of chipper operators to wood dust and suggest suitable countermeasures. The survey included both industrial and small-scale chipping operations, all located in Central Italy, on the Apennine mountain range. During the survey, 60 samples were collected using standardized methods. For the purpose of the tests, each operator carried a wearable active sampler connected to a suction pump. When operators sat inside an enclosed cab, samples were also collected outside the cab in order to gauge the dust abatement effect of a protected work station. Exposure to dust varied widely with wood conditions and machine productivity, and only occasionally exceeded the 5mg m(-3) legal limit. Operators working inside a cab were three times less exposed than operators working outside, and they were never exposed to concentrations exceeding the legal limit. It is adviceable that people working full-time as chipper operators are positioned inside an enclosed cab, for limiting their exposure to wood dust. Small-scale operators are generally part-timers, which further reduces their long-term exposure.

Diverse applications of electronic-nose technologies in agriculture and forestry.

Electronic-nose (e-nose) instruments, derived from numerous types of aroma-sensor technologies, have been developed for a diversity of applications in the broad fields of agriculture and forestry. Recent advances in e-nose technologies within the plant sciences, including improvements in gas-sensor designs, innovations in data analysis and pattern-recognition algorithms, and progress in material science and systems integration methods, have led to significant benefits to both industries. Electronic noses have been used in a variety of commercial agricultural-related industries, including the agricultural sectors of agronomy, biochemical processing, botany, cell culture, plant cultivar selections, environmental monitoring, horticulture, pesticide detection, plant physiology and pathology. Applications in forestry include uses in chemotaxonomy, log tracking, wood and paper processing, forest management, forest health protection, and waste management. These aroma-detection applications have improved plant-based product attributes, quality, uniformity, and consistency in ways that have increased the efficiency and effectiveness of production and manufacturing processes. This paper provides a comprehensive review and summary of a broad range of electronic-nose technologies and applications, developed specifically for the agriculture and forestry industries over the past thirty years, which have offered solutions that have greatly improved worldwide agricultural and agroforestry production systems.

Reducing kickback of portable combustion chain saws and related injury risks: laboratory tests and deductions.

Portable chain saws are still very dangerous machines. Reduced prices of these machines mean they are widely available to people who like DIY (do it yourself) and professionals. Kickback of chain saws is extremely dangerous for the operator. This paper discusses the results of laboratory investigations of combustion chain saws. The tests were conducted on a standardized kickback test stand and covered the course of kickback, its energy, angle and duration. The results showed that during the contact of a saw chain with wood, the first to appear was the process of wood cutting, which absorbed 90-95% of the reduced energy of the cutting system. The greater the absorbed energy, the smaller the kickback angle. Wood cutting work is particularly influenced by proper chain tension, the use of chains with anti-kickback links, guide bars with sliding endings and a quickly activated chain brake.

Fatal injury in tree felling and related activities, Victoria, Australia 1992-2007.

This study aims to examine fatalities resulting from tree felling and related activities in Victoria, Australia, involving work and do-it-yourself (DIY) activities, 1992-2007. Case identification was undertaken using coronial databases. A manual review of coroners' findings of closed cases was performed. Data collected and examined comprised demographics, occupation, incident location, activity, equipment used, injury mechanism and cause of death. Sixty-two cases were identified during the 16-year period; over 50% comprised DIY deaths (n=33). All but one victim was male. The median age for paid workers was less than for DIY (43 years vs 59 years). One-third of work activities were performed by persons outside professional tree-felling industries. While commercial forestry and logging industries experience a high fatality rate in Australia, non-professionals are also vulnerable to tree-felling injury. Study findings identified in excess of 70% of fatal incidents involved persons not employed within a relevant industry. Prevention efforts must focus on safety beyond workplaces and certain industries alone to reduce these deaths.

Observing the forest canopy with a new ultra-violet compact airborne lidar.

We have developed a new airborne UV lidar for the forest canopy and deployed it in the Landes forest (France). It is the first one that: (i) operates at 355 nm for emitting energetic pulses of 16 mJ at 20 Hz while fulfilling eye-safety regulations and (ii) is flown onboard an ultra-light airplane for enhanced flight flexibility. Laser footprints at ground level were 2.4 m wide for a flying altitude of 300 m. Three test areas of ≈ 500 × 500 m(2) with Maritime pines of different ages were investigated. We used a threshold method adapted for this lidar to accurately extract from its waveforms detailed forest canopy vertical structure: canopy top, tree crown base and undergrowth heights. Good detection sensitivity enabled the observation of ground returns underneath the trees. Statistical and one-to-one comparisons with ground measurements by field foresters indicated a mean absolute accuracy of ≈ 1 m. Sensitivity tests on detection threshold showed the importance of signal to noise ratio and footprint size for a proper detection of the canopy vertical structure. This UV-lidar is intended for future innovative applications of simultaneous observation of forest canopy, laser-induced vegetation fluorescence and atmospheric aerosols.

Causes of accidents at work in the opinions of public sector forestry employees in Poland.

OBJECTIVE: The aim of the study was recognition of opinions of forestry employees concerning causes of accidents in forestry, and evaluation of which of the selected demographic characteristics of forestry employees are associated with their opinions concerning causes of occupational accidents. An attempt was also undertaken to answer the question whether there is any relationship between the opinions of forestry employees pertaining to the causes of accidents at work, and observance of the OSH principles concerning the use of protection measures. MATERIAL AND METHODS: The survey included 135 forestry employees and conducted by using an author-constructed questionnaire containing items which primarily concerning the causes of accidents at work and the protection measures applied. The opinions of forestry employees pertaining to the causes of accidents were analyzed according to independent variables, such as: workplace, period of employment, age, education level, and an index of the level of the respondents' concern about OSH (index of the use of personal protection measures by the respondents). The significance of differences between the subgroups selected according to the above-mentioned variables was assessed using the chi-square test. RESULTS: Forestry employees most frequently indicated such causes of accidents as the lack of e use of protection equipment (63.7%), bravado and neglecting hazards (63%), as well as entering or staying in a danger zone during tree felling (56.3%). Nearly a half of the respondents (48.1%) mentioned as the cause of accidents the improper and self-willed behaviour of an employee. The respondents additionally mentioned being taken by surprise by an unexpected event (40%), and the inadequate state of machinery, equipment, and vehicles (36.3%). CONCLUSIONS: Based on the results of the study concerning the causes of accidents in forestry, it was found that the examined forestry employees show high awareness and knowledge concerning the causes of occupational accidents in forestry. The greatest differences in the way of perceiving the causes of accidents and hazards were observed according to the respondents' period of employment and age. In addition, a relationship was observed between indication by the respondents of specified causes of accidents, and the scope of their use of protection measures.

Effect of cutting tool with micro-pits texture on wood cutting performance.

A reasonable micro-pits texture has been initially proved that it can improve friction characteristics between wood and cemented carbide surface and reduce surface friction coefficient. In order to study the cutting performance of the micro-texture when it is applied to the cutting tool for cutting wood more effectively, this paper selected micro-pit texture for studying influence of surface micro-texture cutting tool on wood cutting performance and cutting temperature, finding that when micro-pit cemented carbide cutting tool is adopted for turning the northeast China ash (Fraxinus spp.), it can reduce cutting force of turning and surface friction coefficient between rake face and cuttings. Moreover, for type A and type B cutting tools, when the texture parameters are that the diameter of the micro-pit is 80µm, the depth of the micro pit is: 10µm, area occupancy is 20% and the diameter of the micro-pit is 120µm, the depth of the micro-pit is 10µm and the area occupancy is 20%, the effect generated is the best. When a texture cutting tool is used for cutting, the decrease of the highest temperature in the cutting area is not very great, but the average temperature in the cutting area changes a lot, which is mainly caused by that micro-texture is processed at a position of the rake face close to the main cutting edge and that the highest temperature of cutting is mainly generated on the contact point between tool tip and wood. A reasonable micro-texture parameter can form a layer of liquid lubricating film on the up and down contact surfaces such that the direct contact between cemented carbide and northeast China ash is changed into indirect contact between lubricating films formed by the liquid so as to reduce the surface friction coefficient.

Injury Rate Comparisons for Nonmechanized and Mechanized Logging Operations, Washington State, 2005-2014.

OBJECTIVES: Current industry classification systems in the United States do not differentiate mechanized and nonmechanized logging operations. The objectives of this article are to quantify injury risk differences between mechanized and nonmechanized logging operations in Washington State and to evaluate for potential injury risk tradeoffs, such as decreasing traumatic injuries while increasing nontraumatic injuries that might occur when mechanized logging operations are substituted for nonmechanized logging operations. METHODS: Using Washington State workers' compensation insurance risk classes to differentiate mechanized and nonmechanized logging operations, injury and illness claims data and employer reported hours were used to compare claim rates and to characterize injuries by type of logging operation. RESULTS: From 2005 to 2014, the accepted Washington State worker's compensation claim rate for nonmechanized logging was 46.4 per 100 full-time equivalent employees compared to 6.7 per 100 full-time equivalent (FTE) for mechanized logging activities. The rate ratio for comparing nonmechanized to mechanized logging claims rates for all accepted claims was 6.9 (95% Confidence Interval 6.4-7.5). Claim rates for traumatic injury and nontraumatic injuries in nonmechanized logging exceeded comparable rates in mechanized logging activities, although the distribution of types of injury differed by type of logging operation. A greater percentage of accepted claims in nonmechanized logging were traumatic injuries than in mechanized logging (92.2% vs. 85.0%, respectively). In addition, nonmechanized logging had higher total claim and medical costs per FTE and had a higher proportion of claims with lost work time than mechanized logging. CONCLUSION: Mechanized logging offers a considerable safety advantage over nonmechanized logging operations. Continued efforts to increase the mechanization of logging operations will result in decreased injury rates.

Safety in steep slope logging operations.

Partial results of a NIOSH-funded study for "Protecting the Logging Workforce: Development of Innovative Logging Techniques for a Safer Work Environment" by a team of researchers at Oregon State University are presented that review safety in steep slope logging. Comparisons are made for hazards and exposures of "conventional" and new technologies for steep slopes. Hazards of new technologies are identified. Safety assessments are addressed for forestry sectors internationally, for the firm and for workers. Important questions of technical feasibility, economic viability and environmental performance are raised. Ongoing research on operators using tethered and untethered systems are described. Results will help inform training and selecting operators. New Best Operating Practices and safety code regulations will result from the research. New technologies will reduce worker hazards and exposures for steep slope logging.

Emergency Medical Services Pre-Hospital Care Reports as a Data Source for Logging Injury Surveillance.

Logging workers are at high risk of injury, and although data on fatal injuries exists, less is known about non-fatal injuries. The purpose of this study is to describe initial trends in logging morbidity in Maine and New Hampshire using pre-hospital care reports. Demographics and specifics of the event were recorded for each incident case. Both quantitative and qualitative analyses were employed. Logging injuries (n = 70) were primarily due to trees, heavy equipment, and chainsaws. Interventions focused on heavy equipment safety (particularly slips, trips, and falls), and personal protective equipment use would be warranted based on the findings of this surveillance system. Our methods are able to capture traumatic injury in logging, in sufficient detail to prioritize interventions and to evaluate their outcomes. The system is low-cost and has the potential to be sustained over a long period.

Applicability of personal laser scanning in forestry inventory.

Light Detection and Ranging (LiDAR) technology has been widely used in forestry surveys in the form of airborne laser scanning (ALS), terrestrial laser scanning (TLS), and mobile laser scanning (MLS). The acquisition of important basic tree parameters (e.g., diameter at breast height and tree position) in forest inventory did not solve the problem of low measurement efficiency or weak GNSS signal under the canopy. A personal laser scanning (PLS) device combined with SLAM technology provides an effective solution for forest inventory under complex conditions with its light weight and flexible mobility. This study proposes a new method for calculating the volume of a cylinder using point cloud data obtained by a PLS device by fitting to a polygonal cylinder to calculate the diameter of the trunk. The point cloud data of tree trunks of different thickness were modeled using different fitting methods. The rate of correct tree trunk detection was 93.3% and the total deviation of the estimations of tree diameter at breast height (DBH) was -1.26 cm. The root mean square errors (RMSEs) of the estimations of the extracted DBH and the tree position were 1.58 cm and 26 cm, respectively. The survey efficiency of the personal laser scanning (PLS) device was 30m2/min for each investigator, compared with 0.91m2/min for the field survey. The test demonstrated that the PLS device combined with the SLAM algorithm provides an efficient and convenient solution for forest inventory.

Phenotyping Whole Forests Will Help to Track Genetic Performance.

Phenotyping is the accurate and precise physical description of organisms. Accurate and quantitative phenotyping underpins the delivery of benefits from genetic improvement programs in agriculture. In forest trees, phenotyping at an equivalent precision has been impossible because trees and forests are large, long-lived, and highly variable. These facts have restricted the delivery of genetic gains in forestry compared to other agricultural sectors. We describe a landscape-scale phenotyping platform that integrates remote sensing, spatial information systems, and genomics to facilitate the delivery of greater gains enabling forestry to catch up with other sectors. Combining remote sensing at a range of spatial and temporal scales with genomics will ultimately impact on tree breeding globally.

Application of metrics constructed from vibrotactile thresholds to the assessment of tactile sensory changes in the hands.

Two tools for assessing tactile sensory disturbances in the hands have been constructed from mechanoreceptor-specific vibrotactile threshold shifts, and thresholds changes with time, and employed in a prospective study of forest workers (N=18). Statistically significant positive threshold shifts (i.e., reductions in sensitivity compared to the hands of healthy persons) were found in five hands at study inception (13.9%), and 15 hands at follow-up (41.7%). Four patterns of threshold shift could be identified, involving selectively the median and/or ulnar nerve pathways and/or end organs. Statistically significant positive threshold changes (i.e., reductions in sensitivity with time) were recorded in 69.4% of the hands over a five-year period, even though a majority of the workers remained symptom free. If the thresholds recorded from subjects not working with power tools are used to control for aging, lifestyle, and environmental factors during the five year period, then 40% of the remaining subjects are found to be experiencing work-related threshold changes in their hands. The ability of the threshold shift metric to predict the numbness reported by these subjects shows that it is closely associated with the tactile sensory changes occurring in their hands.