Synthesis of α-l-Araf and ß-d-Galf series furanobiosides using mutants of a GH51 α-l-arabinofuranosidase.

The GH-51 α-l-arabinofuranosidase from Thermobacillus xylanilyticus (TxAbf) possesses versatile catalytic properties, displaying not only the ability to hydrolyze glycosidic linkages but also to synthesize furanobiosides in α-l-Araf and ß-d-Galf series. Herein, mutants are investigated to evaluate their ability to perform self-condensation, assessing both yield improvements and changes in regioselectivity. Overall yields of oligo-α-l-arabino- and oligo-ß-d-galactofuranosides were increased up to 4.8-fold compared to the wild-type enzyme. In depth characterization revealed that the mutants exhibit increased transfer rates and thus a hydrolysis/self-condensation ratio in favor of synthesis. The consequence of the substitution N216W is the creation of an additional binding subsite that provides the basis for an alternative acceptor substrate binding mode. As a result, mutants bearing N216W synthesize not only (1,2)-linked furanobiosides, but also (1,3)- and even (1,5)-linked furanobiosides. Since the self-condensation is under kinetic control, the yield of homo-disaccharides was maximized using higher substrate concentrations. In this way, the mutant R69H-N216W produced oligo-ß-d-galactofuranosides in > 70% yield. Overall, this study further demonstrates the potential usefulness of TxAbf mutants for glycosynthesis and shows how these might be used to synthesize biologically-relevant glycoconjugates.

Kinetics, detergent compatibility and feather-degrading capability of alkaline protease from Bacillus subtilis AKAL7 and Exiguobacterium indicum AKAL11 produced with fermentation of organic municipal solid wastes.

Alkaline proteases having activity and stability at alkaline pH possess a large variety of applications in many industries. Growing renewed interest urges the need to find a single alkaline protease with promising properties to be used in different industrial processes. Herein, alkaline proteases produced through fermentation of cheap and easily available organic municipal solid wastes by Bacillus subtilis AKAL7 and Exiguobacterium indicum AKAL11 were purified to investigate their kinetic and thermodynamic parameters, detergent compatibility, dehairing and feather-degrading capability. Sodium dodecyl sulfate polyacrylamide gel electrophoresis revealed that the purified protease from B. subtilis and E. indicum had molecular mass of ∼45 and 75 kDa, respectively. The protease from B. subtilis and E. indicum showed highest activity at 55 and 50 °C having low K m 1.17 and 0.567 mg/mL and high V max 416.67 and 333.33 µmole/min, respectively. The activation energy and temperature quotient of protease from B. subtilis and E. indicum were 26.52 and 65.75 kJ/mole, and 1.0004 and 1.0003 at 20-55 and 20-50 °C, respectively. Thermodynamics analysis revealed the formation of more ordered enzyme-substrate complexes along with spontenity of enzyme reaction. The protease from E. indicum exhibited better compatibility at higher concentration of detergents compared to that from B. subtilis. However, both proteases could retain more than 80% of the activity in the presence of 0.1% commercial laundry detergents. The purified protease from the both sources could degrade almost 90% of barbs and 40% of dry weight of the native feather and that from E. indicum could dehair cow skin. Results reported herein suggest that the alkaline protease from B. subtilis AKAL7 and E. indicum AKAL11 has biotechnological implications in detergent, leather and poultry feather processing industries.

Improving the catalytic efficiency of aldo-keto reductase KmAKR towards t-butyl 6-cyano-(3R,5R)-dihydroxyhexanoate via semi-rational design.

t-Butyl 6-cyano-(3R,5R)-dihydroxyhexanoate ((3R,5R)-2) is an important chiral diol synthon of atorvastatin calcium. Previously, we constructed a variant KmAKR-W297H (M1) of Kluyveromyces marxianus aldo-keto reductase (KmAKR, designated as M0), possessing excellent diastereoselectivity but moderate activity towards t-butyl 6-cyano-(5R)-hydroxy-3-oxohexanoate ((5R)-1). In this work, KmAKR-W297H/Y296W/K29H (M3) was developed via semi-rational design. It exhibited much improved catalytic efficiency towards (5R)-1. The Km values of M3 for NADPH and (5R)-1 were 0.15 mmol/L and 1.41 mmol/L, and the maximal reaction rate vmax was 55.56 µmol/min/mg. Compared with M1, the catalytic efficiency kcat/Km of M3 was increased 2.64-fold. Coupled with Exiguobacterium sibiricum glucose dehydrogenase (EsGDH) for nicotinamide adenine dinucleotide phosphate (NADPH) regeneration, M3 took 3.5 h to completely reduce (5R)-1 at up to 100.0 g/L, producing 237.4 mmol/L (3R,5R)-2 in d.e.P value above 99.5%. The space-time yield (STY) of M3-catalyzed (3R,5R)-2 synthesis was 372.8 g/L/d.

Efficient Synthesis of Purine Nucleoside Analogs by a New Trimeric Purine Nucleoside Phosphorylase from Aneurinibacillus migulanus AM007.

Purine nucleoside phosphorylases (PNPs) are promising biocatalysts for the synthesis of purine nucleoside analogs. Although a number of PNPs have been reported, the development of highly efficient enzymes for industrial applications is still in high demand. Herein, a new trimeric purine nucleoside phosphorylase (AmPNP) from Aneurinibacillus migulanus AM007 was cloned and heterologously expressed in Escherichia coli BL21(DE3). The AmPNP showed good thermostability and a broad range of pH stability. The enzyme was thermostable below 55 °C for 12 h (retaining nearly 100% of its initial activity), and retained nearly 100% of the initial activity in alkaline buffer systems (pH 7.0-9.0) at 60 °C for 2 h. Then, a one-pot, two-enzyme mode of transglycosylation reaction was successfully constructed by combining pyrimidine nucleoside phosphorylase (BbPyNP) derived from Brevibacillus borstelensis LK01 and AmPNP for the production of purine nucleoside analogs. Conversions of 2,6-diaminopurine ribonucleoside (1), 2-amino-6-chloropurine ribonucleoside (2), and 6-thioguanine ribonucleoside (3) synthesized still reached >90% on the higher concentrations of substrates (pentofuranosyl donor: purine base; 20:10 mM) with a low enzyme ratio of BbPyNP: AmPNP (2:20 µg/mL). Thus, the new trimeric AmPNP is a promising biocatalyst for industrial production of purine nucleoside analogs.

Bioamination of alkane with ammonium by an artificially designed multienzyme cascade.

Biocatalytic C-H amination is one of the most challenging tasks. C-H amination reaction can hardly be driven efficiently by solely one enzyme so far. Thus, enzymatic synergy represents an alternative strategy. Herein, we report an "Artificially Bioamination Pathway" for C-H amination of cyclohexane as a model substrate. Three enzymes, a monooxygenase P450BM3 mutant, an alcohol dehydrogenase ScCR from Streptomyces coelicolor and an amine dehydrogenase EsLeuDH from Exiguobacterium sibiricum, constituted a clean cascade reaction system with easy product isolation. Two independent cofactor regeneration systems were optimized to avoid interference from the endogenous NADH oxidases in the host E. coli cells. Based on a stepwise pH adjustment and ammonium supplement strategy, and using an in vitro mixture of cell-free extracts of the three enzymes, cyclohexylamine was produced in a titer of 14.9 mM, with a product content of up to 92.5%. Furthermore, designer cells coexpressing the three required enzymes were constructed and their capability of alkane bio-amination was examined. This artificially designed bioamination paves an attractive approach for enzymatic synthesis of amines from accessible and cheap alkanes.

Cloning, expression and characterization of the esterase estUT1 from Ureibacillus thermosphaericus which belongs to a new lipase family XVIII.

A new esterase gene from thermophilic bacteria Ureibacillus thermosphaericus was cloned into the pET32b vector and expressed in Escherichia coli BL21(DE3). Alignment of the estUT1 amino acid sequence revealed the presence of a novel canonical pentapeptide (GVSLG) and 41-47% identity to the closest family of the bacterial lipases XIII. Thus the esterase estUT1 from U. thermosphaericus was assigned as a member of the novel family XVIII. It also showed a strong activity toward short-chain esters (C2-C8), with the highest activity for C2. When p-nitrophenyl butyrate is used as a substrate, the temperature and pH optimum of the enzyme were 70-80 °C and 8.0, respectively. EstUT1 showed high thermostability and 68.9 ± 2.5% residual activity after incubation at 70 °C for 6 h. Homology modeling of the enzyme structure showed the presence of a putative catalytic triad Ser93, Asp192, and His222. The activity of estUT1 was inhibited by PMSF, suggesting that the serine residue is involved in the catalytic activity of the enzyme. The purified enzyme exhibited high stability in organic solvents. EstUT1 retained 85.8 ± 2.4% residual activity in 30% methanol at 50 °C for 6 h. Stability at high temperature and tolerance to organic solvents make estUT1 a promising enzyme for biotechnology application.

Enantioselective synthesis of amines via reductive amination with a dehydrogenase mutant from Exigobacterium sibiricum: Substrate scope, co-solvent tolerance and biocatalyst immobilization.

In recent years, the reductive amination of ketones in the presence of amine dehydrogenases emerged as an attractive synthetic strategy for the enantioselective preparation of amines starting from ketones, an ammonia source, a reducing reagent and a cofactor, which is recycled in situ by means of a second enzyme. Current challenges in this field consists of providing a broad synthetic platform as well as process development including enzyme immobilization. In this contribution these issues are addressed. Utilizing the amine dehydrogenase EsLeuDH-DM as a mutant of the leucine dehydrogenase from Exigobacterium sibiricum, a range of aryl-substituted ketones were tested as substrates revealing a broad substrate tolerance. Kinetics as well as inhibition effects were also studied and the suitability of this method for synthetic purpose was demonstrated with acetophenone as a model substrate. Even at an elevated substrate concentration of 50 mM, excellent conversion was achieved. In addition, the impact of water-miscible co-solvents was examined, and good activities were found when using DMSO of up to 30% (v/v). Furthermore, a successful immobilization of the EsLeuDH-DM was demonstrated utilizing a hydrophobic support and a support for covalent binding, respectively, as a carrier.

Electrogenic steps of light-driven proton transport in ESR, a retinal protein from Exiguobacterium sibiricum.

A retinal protein from Exiguobacterium sibiricum (ESR) functions as a light-driven proton pump. Unlike other proton pumps, it contains Lys96 instead of a usual carboxylic residue in the internal proton donor site. Nevertheless, the reprotonation of the Schiff base occurs fast, indicating that Lys96 facilitates proton transfer from the bulk. In this study we examined kinetics of light-induced transmembrane electrical potential difference, ΔΨ, generated in proteoliposomes reconstituted with ESR. We show that total magnitude of ΔΨ is comparable to that produced by bacteriorhodopsin but its kinetic components and their pH dependence are substantially different. The results are in agreement with the earlier finding that proton uptake precedes reprotonation of the Schiff base in ESR, suggesting that Lys96 is unprotonated in the initial state and gains a proton transiently in the photocycle. The electrogenic phases and the photocycle transitions related to proton transfer from the bulk to the Schiff base are pH dependent. At neutral pH, they occur with τ 0.5ms and 4.5ms. At alkaline pH, the fast component ceases and Schiff base reprotonation slows. At pH8.4, a spectrally silent electrogenic component with τ 0.25ms is detected, which can be attributed to proton transfer from the bulk to Lys96. At pH5.1, the amplitude of ΔΨ decreases 10 fold, reflecting a decreased yield and rate of proton transfer, apparently from protonation of the acceptor (Asp85-His57 pair) in the initial state. The features of the photoelectric potential generation correlate with the ESR structure and proposed mechanism of proton transfer.

Overproduction of Rummeliibacillus pycnus arginase with multi-copy insertion of the arg R.pyc cassette into the Bacillus subtilis chromosome.

A plasmid-less and marker-less strain with multi-copy integration of the arginase gene from Rummeliibacillus pycnus was constructed using Bacillus subtilis 168 as a host. A total of nine copies of the arg R.pyc cassettes, in which the R. pycnus arginase gene was fused with the strong promoter P43, were inserted into the recipient chromosome. These multiple insertions were completed via step-by-step integrations into designed (2 copies) and random (9 copies) sites, respectively. A strategy for random site integration was developed based on the construction of the arg R.pyc cassette sandwiched between "front" and "back" homologous arms which were randomly restricted from chromosomal DNA. An antibiotic resistance marker was applied in transformant selection and was eliminated via the Cre/lox system. Performance showed that the highest enzyme activity (14.5 U/mL) was obtained after culture in flasks, and this segregation stable strain could efficiently hydrolyze L-arginine with a 97.2% molar yield, showing potential application in the food industry.

Characterization of an L-phosphinothricin resistant glutamine synthetase from Exiguobacterium sp. and its improvement.

A glutamine synthetase (GS; 1341 bp) gene with potent L-phosphinothricin (PPT) resistance was isolated and characterized from a marine bacterium Exiguobacterium sp. Molecular docking analysis indicated that the substitution of residues Glu60 and Arg64 may lead to significant changes in binding pocket. To enhance the enzymatic property of GS, variants E60A and R64G were obtained by site-directed mutagenesis. The results revealed a noteworthy change in the thermostability and activity in comparison to the wild type (WT). WT exhibited optimum activity at 35 °C, while E60A and R64G exhibited optimum activity at 45 and 40 °C, respectively. The mutant R64G was 4.3 times more stable at 70 °C in comparison to WT, while E60A was 5.7 times more stable. Kinetic analysis revealed that the k cat value of R64G mutant was 8.10-, 7.25- and 7.63-fold that of WT for ADP, glutamine and hydroxylamine, respectively. The kinetic inhibition (K i, 4.91 ± 0.42 mM) of R64G was 2.02-fold that of WT (2.43 ± 0.14 mM) for L-phosphinothricin. The analysis of structure and function relationship showed that the binding pocket underwent dramatic changes when Arg site of 64 was substituted by Gly, thus promoting the rapid capture of substrates and leading to increase in activity and PPT-resistance of mutant R64G. The rearrangements of the residues at the molecular level formed new hydrogen bonds around the active site, which contributed to the increase of thermostability of enzymes. This study provides new insights into substrate binding mechanism of glutamine synthetase and the improved GS gene also has a potential for application in transgenic crops with L-phosphinothricin tolerance.

Sodium ions activated phosphofructokinase leading to enhanced D-lactic acid production by Sporolactobacillus inulinus using sodium hydroxide as a neutralizing agent.

Sporolactobacillus inulinus is a superior D-lactic acid-producing bacterium and proposed species for industrial production. The major pathway for D-lactic acid biosynthesis, glycolysis, is mainly regulated via the two irreversible steps catalyzed by the allosteric enzymes, phosphofructokinase (PFK) and pyruvate kinase. The activity level of PFK was significantly consistent with the cell growth and D-lactic acid production, indicating its vital role in control and regulation of glycolysis. In this study, the ATP-dependent PFK from S. inulinus was expressed in Escherichia coli and purified to homogeneity. The PFK was allosterically activated by both GDP and ADP and inhibited by phosphoenolpyruvate; the addition of activators could partly relieve the inhibition by phosphoenolpyruvate. Furthermore, monovalent cations could enhance the activity, and Na+ was the most efficient one. Considering this kind activation, NaOH was investigated as the neutralizer instead of the traditional neutralizer CaCO3. In the early growth stage, the significant accelerated glucose consumption was achieved in the NaOH case probably for the enhanced activity of Na+-activated PFK. Using NaOH as the neutralizer at pH 6.5, the fermentation time was greatly shortened about 22 h; simultaneously, the glucose consumption rate and the D-lactic acid productivity were increased by 34 and 17%, respectively. This probably contributed to the increased pH and Na+-promoted activity of PFK. Thus, fermentations by S. inulinus using the NaOH neutralizer provide a green and highly efficient D-lactic acid production with easy subsequent purification.

The Exiguobacterium sibiricum 255-15 GtfC Enzyme Represents a Novel Glycoside Hydrolase 70 Subfamily of 4,6-α-Glucanotransferase Enzymes.

The glycoside hydrolase 70 (GH70) family originally was established for glucansucrase enzymes found solely in lactic acid bacteria synthesizing α-glucan polysaccharides from sucrose (e.g., GtfA). In recent years, we have characterized GtfB and related Lactobacillus enzymes as 4,6-α-glucanotransferase enzymes. These GtfB-type enzymes constitute the first GH70 subfamily of enzymes that are unable to act on sucrose as a substrate but are active with maltodextrins and starch, cleave α1→4 linkages, and synthesize linear α1→6-glucan chains. The GtfB disproportionating type of activity results in the conversion of malto-oligosaccharides into isomalto/malto-polysaccharides with a relatively high percentage of α1→6 linkages. This paper reports the identification of the members of a second GH70 subfamily (designated GtfC enzymes) and the characterization of the Exiguobacterium sibiricum 255-15 GtfC enzyme, which is also inactive with sucrose and displays 4,6-α-glucanotransferase activity with malto-oligosaccharides. GtfC differs from GtfB in synthesizing isomalto/malto-oligosaccharides. Biochemically, the GtfB- and GtfC-type enzymes are related, but phylogenetically, they clearly constitute different GH70 subfamilies, displaying only 30% sequence identity. Whereas the GtfB-type enzyme largely has the same domain order as glucansucrases (with α-amylase domains A, B, and C plus domains IV and V), this GtfC-type enzyme differs in the order of these domains and completely lacks domain V. In GtfC, the sequence of conserved regions I to IV of clan GH-H is identical to that in GH13 (I-II-III-IV) but different from that in GH70 (II-III-IV-I because of a circular permutation of the (ß/α)8 barrel. The GtfC 4,6-α-glucanotransferase enzymes thus represent structurally and functionally very interesting evolutionary intermediates between α-amylase and glucansucrase enzymes.

Efficient production of enantiomerically pure D-phenyllactate from phenylpyruvate by structure-guided design of an engineered D-lactate dehydrogenase.

3-Phenyllactic acid (PLA) is an antimicrobial compound with broad-spectrum activity against bacteria and fungi that could be widely used in the food industry and livestock feeds. Notably, D-PLA exhibits higher antibacterial activity, which gains more attention than L-PLA. In this report, the D-lactate dehydrogenase DLDH744 from Sporolactobacillus inulinus CASD was engineered to increase the enzymatic activities toward phenylpyruvate by protein structure-guided modeling analysis. The phenylpyruvate molecule was first docked in the active center of DLDH744. The residues that might tightly pack around the benzene ring of phenylpyruvate were all selected for mutation. The single site mutant M307L showed the highest increased activity toward bulkier substrate phenylpyruvate than the wild type. By using the engineered D-lactate dehydrogenase M307L expressed in Escherichia coli strains, without coexpression of the cofactor regeneration system, 21.43 g/L D-PLA was produced from phenylpyruvate with a productivity of 1.58 g/L/h in the fed-batch biotransformation process, which ranked in the list as the highest production titer of D-PLA by D-lactate dehydrogenase. The enantiomeric excess value of produced D-PLA in the broth was higher than 99.7 %. Additionally, the structure-guided design of this enzyme will also provide referential information for further engineering other 2-hydroxyacid dehydrogenases, which are useful for a wide range of fine chemical synthesis.

Biochemical and genetic characterization of ß-1,3 glucanase from a deep subseafloor Laceyella putida.

A ß-1,3-glucanase (LpGluA) of deep subseafloor Laceyella putida JAM FM3001 was purified to homogeneity from culture broth. The molecular mass of the enzyme was around 36 kDa as judged by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). LpGluA hydrolyzed curdlan optimally at pH 4.2 and 80 °C. In spite of the high optimum temperature, LpGluA showed relatively low thermostability, which was stabilized by adding laminarin, xylan, colloidal chitin, pectin, and its related polysaccharides. The gene for LpGluA cloned by using degenerate primers was composed of 1236 bp encoding 411 amino acids. Production of both LpGluA and a chitinase (LpChiA; Shibasaki et al. Appl Microbiol Biotechnol 98, 7845-7853, 2014) was induced by adding N-acetylglucosamine (GluNAc) to a culture medium of strain JAM FM3001. Construction of expression vectors containing the gene for LpGluA and its flanking regions showed the existence of a putative repressor protein.

Purification and characterization of a new neutral metalloprotease from marine Exiguobacterium sp. SWJS2.

Among the protease-producing bacterial strains isolated from deep-sea sediments, SWJS2 was finally selected and identified as genus Exiguobacterium. Plackett-Burman and orthogonal array designs were applied to optimize the fermentation conditions, and the results are as follows: Glucose 5g, yeast extract 15g, glycerin 2g and CaCl2 ⋅2H2 O 0.5 g dissolved in 1 L artificial seawater; temperature 25 °C, original pH 7, inoculum rate 2%, seed age 12 H, loading volume 25 mL (250-mL Erlenmeyer flask), shaking speed 150 rpm, and fermentation time 44 H. The protease activity production was improved from about 80 to 660 U/mL under the optimized parameters. The protease was purified fourfold with specificity activity of 30,654.1 U/mg protein and a total yield of 16.2%. The protease exhibited the maximum activity at 40-45 °C and pH 7. Moreover, the enzyme activity was found to be inhibited by Cu(2+) , Ba(2+) , Cd(2+) , Hg(2+) , and Al(3+) at 5 mM, whereas it can be increased by Mg(2+) , Mn(2+) , and Ca(2+) at 0.5-5 mM. The enzyme was totally inactivated by 1 or 5 mM ethylenediaminetetraacetic acid but not by phenylmethanesulfonyl fluoride, tyrpsin inhibitor from Glycine max (STI), benzamidine, 5,5'-dithio-bis-(2-nitro benzoic acid), or pepstatin A, suggesting that it belonged to metalloprotease.

Expression, purification and characterization of a thermostable leucine dehydrogenase from the halophilic thermophile Laceyella sacchari.

OBJECTIVE: A potential thermotolerant L-leucine dehydrogenase from Laceyella sacchari (Ls-LeuDH) was over-expressed in E. coli, purified and characterized. RESULTS: Ls-LeuDH had excellent thermostability with a specific activity of 183 U/mg at pH 10.5 and 25 °C. It retained a high activity in 200 mM carbonate buffer from pH 9.5 to 11. The optimal temperature for Ls-LeuDH was 60 °C. CONCLUSION: It is the first time that a thermostable and highly active LeuDH originating from L. sacchari has been characterized. It may be useful for medical and pharmaceutical applications.

Biocalcification by halophilic bacteria for remediation of concrete structures in marine environment.

Microbial carbonate precipitation has emerged as a promising technology for remediation and restoration of concrete structures. Deterioration of reinforced concrete structures in marine environments is a major concern due to chloride-induced corrosion. In the current study, halophilic bacteria Exiguobacterium mexicanum was isolated from sea water and tested for biomineralization potential under different salt stress conditions. The growth, urease and carbonic anhydrase production significantly increased under salt stress conditions. Maximum calcium carbonate precipitation was recorded at 5 % NaCl concentration. Application of E. mexicanum on concrete specimens significantly increased the compressive strength (23.5 %) and reduced water absorption about five times under 5 % salt stress conditions compared to control specimens. SEM and XRD analysis of bacterial-treated concrete specimens confirmed the precipitation of calcite. The present study results support the potential of this technology for improving the strength and durability properties of building structures in marine environments.

[Characterization of D-lactate dehydrogenase isozymes from a D-lactic acid producing bacterium Sporolactobacillus inulinus].

Objective: Sporolactobacillus inulinus, a typical homofermentative lactic acid bacterium, is an efficient D-lactic acid producer. Various environment factors affect the productivity of S. inulinus. Glucokinase, phosphofructokinase, pyruvate kinase and lactic dehydrogenase are the key enzymes of D-lactic acid production from glucose by S. inulinus. The characteristics of these enzymes are important in controlling and regulating the fermentation process. According to the genome bioinformatics analysis of S. inulinus CASD, three putative D-lactate dehydrogenases were identified, among which the bifunctional protein had been reported. In this study, we provided insights into the characteristics of the other two D-lactate dehydrogenase isozymes. Methods: S. inulinus Y2-8 genome was used as the template to amplify D-lactate dehydrogenase gene (dldh) and D-isomer specific 2-hydroxyacid dehydrogenase gene (dhdh). The two recombinant strains E-pET-28a/dldh and E-pET-28a/dhdh were constructed for enzyme expression. Both recombinants DLDH and DHDH could convert pyruvic acid into D-lactic acid. Results: Enzymes expressed by recombinant strains were purified by Ni-NTA chromatography. The apparent molecular mass of DLDH was approximately 37 kDa by SDS-PAGE analysis, and DLDH showed a high affinity to pyruvate with the Km value of (0.58±0.04) mmol/L. The optimal reaction temperature and pH for DLDH was 35℃ and 6.5, respectively. The apparent molecular mass of DHDH was approximately 39 kDa, and the Km of DHDH toward pyruvate was (1.70±0.08) mmol/L. The optimum catalysis temperature and pH of DHDH were 30℃ and 7.5, respectively. Conclusion: According to the Km and optimal reaction pH, DLDH was suggested as the main catalyst in formation D-lactic acid from pyruvate during the fermentation. The enzymatic properties would contribute to the regulation of the fermentation of S. inulinus.

Bacterial Sugar 3,4-Ketoisomerases: Structural Insight into Product Stereochemistry.

3-Acetamido-3,6-dideoxy-d-galactose (Fuc3NAc) and 3-acetamido-3,6-dideoxy-d-glucose (Qui3NAc) are unusual sugars found on the lipopolysaccharides of Gram-negative bacteria and on the S-layers of Gram-positive bacteria. The 3,4-ketoisomerases, referred to as FdtA and QdtA, catalyze the third steps in the respective biosynthetic pathways for these sugars. Whereas both enzymes utilize the same substrate, the stereochemistries of their products are different. Specifically, the hydroxyl groups at the hexose C-4' positions assume the "galactose" and "glucose" configurations in the FdtA and QdtA products, respectively. In 2007 we reported the structure of the apoform of FdtA from Aneurinibacillus thermoaerophilus, which was followed in 2014 by the X-ray analysis of QdtA from Thermoanaerobacterium thermosaccharolyticum as a binary complex. Both of these enzymes belong to the cupin superfamily. Here we report a combined structural and enzymological study to explore the manner in which these enzymes control the stereochemistry of their products. Various site-directed mutant proteins of each enzyme were constructed, and their dTDP-sugar products were analyzed by NMR spectroscopy. In addition, the kinetic parameters for these protein variants were measured, and the structure of one, namely, the QdtA Y17R/R97H double mutant form, was determined to 2.3-Å resolution. Finally, in an attempt to obtain a model of FdtA with a bound dTDP-linked sugar, the 3,4-ketoisomerase domain of a bifunctional enzyme from Shewanella denitrificans was cloned, purified, and crystallized in the presence of a dTDP-linked sugar analogue. Taken together, the results from this investigation demonstrate that it is possible to convert a "galacto" enzyme into a "gluco" enzyme and vice versa.

A Multiple-Labeling Strategy for Nonribosomal Peptide Synthetases Using Active-Site-Directed Proteomic Probes for Adenylation Domains.

Genetic approaches have greatly contributed to our understanding of nonribosomal peptide biosynthetic machinery; however, proteomic investigations are limited. Here, we developed a highly sensitive detection strategy for multidomain nonribosomal peptide synthetases (NRPSs) by using a multiple-labeling technique with active-site-directed probes for adenylation domains. When applied to gramicidin S-producing and -nonproducing strains of Aneurinibacillus migulanus (DSM 5759 and DSM 2895, respectively), the multiple technique sensitively detected an active multidomain NRPS (GrsB) in lysates obtained from the organisms. This functional proteomics method revealed an unknown inactive precursor (or other inactive form) of GrsB in the nonproducing strain. This method provides a new option for the direct detection, functional analysis, and high-resolution identification of low-abundance active NRPS enzymes in native proteomic environments.