Boron deficiency decreased the root activity of Ga-exposed rice seedlings by reducing iron accumulation and increasing Ga in iron plaque.

Gallium (Ga) is an emerging chemical pollutant chiefly associated with high-tech industries. Boron (B) alleviates the negative effects of toxic elements on plant growth. Thereby, the effects of B fertilization on Ga toxicity in rice seedlings was studied to clarify the role of iron plaque in the distribution of Ga, Fe, and B in Ga-treated rice seedlings in the presence or absence of B. Gallium exposure significantly reduced the biomass of rice seedlings. Boron deficiency induced a significant change in the distribution of B in Ga-treated rice seedlings compared with "Ga+B" treatments. Accumulation of Ga in roots, dithionite-citrate-bicarbonate (DCB) extracts, and shoots showed a dose-dependent manner from both +B and -B rice seedlings. Boron nutrition levels affect the distribution of Fe in roots, DCB extracts, and shoots, in which DCB-extractable Fe was significantly decreased from "Ga-B" treatments compared with "Ga+B" treatments. Root activity was significantly decreased in both Ga-exposed rice seedlings; however, B-deficient seedlings showed a severe reduction than +B rice seedlings. These results reveal that Fe plaque might be a temporary sink for B accumulation when plants are grown with proper B, wherein the re-utilization of DCB-extractable B stored in Fe plaque is mandatory for plant growth under B deficiency. Correlation analysis revealed that B deficiency decreased the root activity of Ga-exposed rice seedlings by reducing DCB-extractable Fe and increasing DCB-extractable Ga in Fe plaque. This study enhances our understanding of how B nutritional levels affect Ga toxicity in rice plants.

Reclamation of boron from solid and liquid streams for fertilizer application.

Boron (B) is a crucial element for efficient plant growth and development; therefore, B-based fertilisers have been employed in agricultural applications. The need for B-based fertilisers for agricultural uses is continuously increasing as a result of the world's growing population. It is expected that the global market for B-based fertiliser will grow by around $6.3 billion by 2032; hence, demand for B sources will also increase. In addition to being used in fertiliser, B is also employed in the production of neodymium iron B (NdFeB) permanent magnets. The demand for NdFeB magnets is also continuously increasing. Hence, it is of the utmost importance to reclaim B from secondary resources due to the rising demand for B in a wide variety of applications. This review study addresses the recovery of B from various waste streams. The main focus is on the recovery of B from spent NdFeB magnets, borax sludge, and liquid streams such as brine water, seawater, sewage, industrial wastewater, and agricultural effluents. Different technologies for B recovery are discussed, such as sorption, solvent extraction, membrane processes, precipitation, and hydrometallurgical methods. Solvent extraction has been found to be a very effective approach for reclaiming B from spent NdFeB magnet waste and from liquid streams with high B concentration (>1-2 g/L). Further, the application of B-based fertiliser in agriculture application is reviewed. Challenges associated with B recovery from waste streams and future perspectives are also highlighted in this review.

PCA and fuzzy clustering-based delineation of soil nutrient (S, B, Zn, Mn, Fe, and Cu) management zones of sub-tropical Northeastern India for precision nutrient management.

Understanding the spatial distribution of plant available soil nutrients and influencing soil properties and delineation soil nutrient management zones (MZs) are important for implementing precision nutrient management options (PNMO) in an area to achieve maintainable crop production. We assessed spatial distribution pattern of plant available sulphur (S) (PAS), boron (B) (PAB), zinc (PAZn), manganese (PAMn), iron (PAFe), and copper (PACu), and soil organic carbon (SOC), pH, and electrical conductivity (EC) to delineate soil nutrients MZs in northeastern region of India. A total of 17,471 representative surface (0-15 cm depth) soil samples were collected from the region, processed, and analysed for above-mentioned soil parameters. The values of PAS (0.22-99.2 mg kg-1), PAB (0.01-6.45 mg kg-1), PAZn (0.05-13.9 mg kg-1), PAMn (0.08-158 mg kg-1), PAFe (0.50-472 mg kg-1), PACu (0.01-19.2 mg kg-1), SOC (0.01-5.80%), pH (3.19-7.56) and EC (0.01-1.66 dS m-1) varied widely with coefficient of variation of 15.5-108%. The semivariogram analysis highlighted exponential, Gaussian and stable best fitted models for soil parameters with weak (PACu), moderate (PAB, PAZn, PAFe, SOC, pH, and EC) and strong (PAS, and PAMn) spatial dependence. The ordinary kriging interpolation revealed different distribution patterns of soil parameters. About 14.8, 27.5, and 3.40% area of the region had PAS of ≤15.0 mg kg-1, PAB of ≤0.50 mg kg-1, and PAZn of had ≤0.90 mg kg-1, respectively. About 67.5, and 32.5% area had SOC content >1.00 and < 1.00%, respectively. Soil pH was ≤5.50, and >5.50 to ≤6.50 in 41.7 and 40.3% area of the region, respectively. The techniques of principal component analysis and fuzzy c-mean algorithm clustering produced 6 MZs of the region with different areas and values of soil parameters. The MZs had different levels of deficiency pertaining to PAS, PAB, and PAZn. The produced MZ maps could be used for managing PAS, PAB, PAZn, SOC and soil pH in order to implement PNMO. The study highlighted the usefulness of MZ delineation technique for implementation of PNMO in different cultivated areas for sustainable crop production.

Evaluating boron levels in Turkish mineral waters: a comparative study of three analytical techniques.

Turkey is abundant in natural mineral water sources, thanks to its location on the Alpine-Himalayan belt. Natural mineral water is drinking water characterized by its natural mineral, trace elements, and carbon dioxide content. Because of quite insufficient data, the boron content in bottled natural mineral waters in Turkey was analyzed by three different methods and compared: inductively coupled plasma mass spectrometry technique, carminic acid, and azomethine-H methods, in this study. The boron levels in mineral waters ranged from a minimum of 0.05 mg/L to a maximum of 8.61 mg/L. It was also safe by the upper limit level estimated by the World Health Organisation. As boron plays a beneficial role in human physiology, consuming natural mineral water may offer a positive contribution to public health by supporting boron intake in our country. The other outcome of our research was that the spectrophotometric carminic acid method can yield results similar to those obtained using the inductively coupled plasma mass spectrometry technique since the boron level of Turkish mineral water was within the limits level of the carminic acid method. However, the result of the azomethine-H method was found not to be suitable. Cross-sensitivity with other elements in mineral water might have caused this.

Tetrodotoxin Derivatization with a Newly Designed Boron Reagent Leads to Conventional Reversed-Phase Liquid Chromatography.

Tetrodotoxin (TTX) is a representative natural toxin causing pufferfish food poisoning, which is especially prominent in East and Southeast Asia, including Japan. TTX has been analyzed through post-column derivatization high-performance liquid chromatography (HPLC), ion-pair LC-MS(/MS), and hydrophilic interaction liquid chromatography (HILIC)-MS(/MS) as alternatives to the mouse bioassay method. However, post-column derivatization requires a system for online derivatization reactions, and with the ion-pair LC-MS approach, it is difficult to remove residual ion-pair reagents remaining in the equipment. Moreover, HILIC-MS provides poor separation compared to reversed-phase (RP) HPLC and requires a long time to reach equilibration. Therefore, we decided to develop a TTX analytical method using pre-column derivatization and RP HPLC for the rapid assessment of outbreak samples, including food remnants. In this study, we focused on the vic-diol moiety of TTX and designed a new derivatization reagent coded as NBD-H-DAB. This NBD-H-DAB was synthesized from 4-hydrazino-7-nitro-2,1,3-benzoxadiazole (NBD-H) and 3-fluoro-2-formylphenylboronic acid (FFPBA) with a simple reaction system and rapidly converted to its boronate form, coded NBD-H-PBA, in an aqueous reaction solution. The NBD-H-PBA demonstrated appropriate hydrophobicity to be retained on the RP analytical column and successfully detected with a UV spectrometer. It was easily reacted with the vic-diol moiety of TTX (C6 and C11) to synthesized a boronic ester. The derivatized TTX could be detected using the RP HPLC-UV, and the limit of detection in the fish flesh samples was 0.06 mg/kg. This novel pre-column derivatization of TTX with NBD-H-PBA proves capable for the analysis of TTX.

Comprehensive risk assessment and interactions of fluoride and boron ions in the water-sediments interface: The Red Sea, Egypt.

This study presents a baseline evaluation of the distribution, human and ecotoxicological risk, and the potential interactions of fluoride and boron in the water-sediment interface in 25 locations from incredible Red Sea tourist destinations. Results showed comparable levels of B and F in the water and sediments with previous literature. Significant positive correlation was found between B and F (r = 0.57; P<0.01). Based on the sediment/liquid partition coefficient (Kd), F is more likely to be released from the sediment into seawater (logKd< 3) than B (3< logKd< 4). pH and alkalinity may affect water-sediment interactions of B and F, respectively, while SO42- and Cl- ions had no significant effect on adsorption ability of F and B. The majority of minerals had average saturation Index (SI) > 1 referring to the over saturation of seawater with these minerals and their inability to dissolve. The formation of CF, FAP, and CFAP may be related to the high correlation between Fw (r = 0.928, P< 0.01; r = 0.527, P< 0.01; r = 0.608, P< 0.01) and Bw (r = 0.38, P< 0.05; r = 0.38, P< 0.05; r = 0.397, P< 0.05). Total hazard quotient (THQ) for children and adults were <1, revealing no health risks from exposure to B and F through ingestion and skin contact while swimming. The risk characterization ratio; RCRmix(MEC/PNEC) showed high short-term risks to aquatic organisms. Further investigations might emphasis on emerging mitigation strategies to address these concerns.

Groundwater quality appraisal and zone mapping for agriculture utilities in Wadi Fatima, Saudi Arabia using water quality indices, boron and trace metals.

Groundwater quality in Wadi Fatimah is evaluated and demarcated for agriculture utilities using comprehensive approaches namely, international standards, agricultural water quality (AWQ) indices, irrigation water quality index (IWQI), and trace metals. Groundwater samples were collected (n = 59) and analysed for EC, pH, major and minor ions and trace metals. According to FAO recommendations, 42% of samples (EC > 3000 µS/cm) are inappropriate for agricultural uses. AWQ indices including salinity hazard, Kelly's ratio and Na% show that 50%, 19% and 37% of samples, respectively, are unsuitable for agricultural uses. USSL classification reveals that groundwater is preferable only for high-permeability soils and salt-tolerant crops. IWQI suggests that 88% of samples are moderately usable for agriculture. The interrelationship between water salinity and crop yield justified that 73%, 59%, 51% and 25% of samples are desirable to yield 90% in date palm trees, sorghum, rice and citrus fruits, respectively. Groundwater is appropriate for date palm trees except in downstream regions. Boron concentration suggests that 52%, 81% and 92% of samples are suitable for sensitive, semi-tolerant and tolerant crops, respectively. Groundwater in the central part (suitable for sensitive crops), central and upstream regions (semi-tolerant crops) and all regions except downstream (tolerant crops) are suitable for cultivation. Trace metals contents illustrate that 36%, 34%, 22%, 8%, 5% and 100% of samples are inappropriate for agriculture due to high concentrations of Cr, Cu, Ni, V, Mn and Mo, respectively in the groundwater. Further, AWQ indices, IWQI, USSL classifications and trace metals ensure that groundwater in the downstream, and a few pockets in the upstream are unfit for agricultural uses. This study recommends that groundwater in this basin is more suitable for tolerant crops (ie. date palm, sorghum) followed by semi-tolerant and sensitive crops.

From nuclear track characterization to machine learning based image classification in neutron autoradiography for boron neutron capture therapy.

Knowledge of the 10B microdistribution is of great relevance in BNCT studies. Since 10B concentration assesment through neutron autoradiography depends on the correct quantification of tracks in a nuclear track detector, image acquisition and processing conditions should be controlled and verified, in order to obtain accurate results to be applied in the frame of BNCT. With this aim, an image verification process was proposed, based on parameters extracted from the quantified nuclear tracks. Track characterization was performed by selecting a set of morphological and pixel-intensity uniformity parameters from the quantified objects (area, diameter, roundness, aspect ratio, heterogeneity and clumpiness). Their distributions were studied, leading to the observation of varying behaviours in images generated by different samples and acquisition conditions. The distributions corresponding to samples coming from the BNC reaction showed similar attributes in each analyzed parameter, proving to be robust to the experimental process, but sensitive to light and focus conditions. Considering those observations, a manual feature extraction was performed as a pre-processing step. A Support Vector Machine (SVM) and a fully dense Neural Network (NN) were optimized, trained, and tested. The final performance metrics were similar for both models: 93%-93% for the SVM, vs 94%-95% for the NN in accuracy and precision respectively. Based on the distribution of the predicted class probabilities, the latter had a better capacity to reject inadequate images, so the NN was selected to perform the image verification step prior to quantification. The trained NN was able to correctly classify the images regardless of their track density. The exhaustive characterization of the nuclear tracks provided new knowledge related to the autoradiographic images generation. The inclusion of machine learning in the analysis workflow proves to optimize the boron determination process and paves the way for further applications in the field of boron imaging.

Influence of rootstocks on growth, yield, fruit quality and leaf mineral element contents of pear cv. 'Santa Maria' in semi-arid conditions

BACKGROUND: Rootstocks play an essential role to determining orchard performance of fruit trees. Pyrus communisand Cydonia oblonga are widely used rootstocks for European pear cultivars. The lack of rootstocks adapted to different soil conditions and different grafted cultivars is widely acknowledged in pear culture. Cydonia rootstocks (clonal) and Pyrus rootstocks (seedling or clonal) have their advantages and disadvantages. In each case, site-specific environmental characteristics, specific cultivar response and production objectives must be considered before choosing the best rootstock. In this study, the influence of three Quince (BA 29, Quince A = MA, Quince C = MC) and a local European pear seedling rootstocks on the scion yield, some fruit quality characteristics and leaf macro (N, P, K, Ca and Mg) and micro element (Fe, Zn, Cu, Mn and B) content of 'Santa Maria' pear (Pyrus communis L.) were investigated. RESULTS: Trees on seedling rootstock had the highest annual yield, highest cumulative yield (kg tree(-1)), largest trunk cross-sectional area (TCSA), lowest yield efficiency and lowest cumulative yield (ton ha(-1)) in the 10th year after planting. The rootstocks had no significant effect on average fruit weight and fruit volume. Significantly higher fruit firmness was obtained on BA 29 and Quince A. The effect of rootstocks on the mineral element accumulation (N, K, Ca, Mg, Fe, Zn, Cu, Mn and B) was significant. Leaf analysis showed that rootstocks used had different mineral uptake efficiencies throughout the early season. CONCLUSION: The results showed that the rootstocks strongly affected fruit yield, fruit quality and leaf mineral element uptake of 'Santa Maria' pear cultivar. Pear seedling and BA 29 rootstock found to be more prominent in terms of several characteristics for 'Santa Maria' pear cultivar that is grown in highly calcareous soil in semi-arid climate conditions. We determined the highest N, P (although insignificant), K, Ca, Mg, Fe and Cu mineral element concentrations on the pear seedling and BA 29 rootstocks. According to the results, we recommend the seedling rootstock for normal density plantings (400 trees ha(-1)) and BA 29 rootstock for high-density plantings (800 trees ha(-1)) for 'Santa Maria' pear cultivar in semi-arid conditions.

Avaliação da força de repulsão entre magnetos de neodímeo ferro boro usados em tratamentos intra e extra bucais / Evaluation of repulsion force between Neodymium Iron Boron magnets used for intra and extra oral treatments

Os magnetos de Neodímio Ferro Boro (Nd2Fe14B) apresentam excelentes propriedades magnéticas e compatibilidade biológica, embora sejam frágeis e possuam baixa resistência à corrosão. As forças de atração magnética de magnetos de terras raras têm sido empregadas em sistemas de retenção, principalmente associadas aos implantes osseointegráveis, em próteses bucais e próteses faciais, bem como em aparelhos ortodônticos. Este estudo avalia o comportamento das forças de repulsão magnética, em função do volume e comprimento do eixo magnético, quando submetidos a afastamentos, de modo que esta propriedade física seja empregada em odontologia. Vinte e quatro corpos de prova, com um ou dois pares de magnetos de Nd2Fe14B, com diferentes formas e volumes variados, foram submetidos a ensaio mecânico para mensuração das forças de repulsão magnética, em condições de afastamentos que variaram entre 0,0 e 20,0 mm. Os dados observados mostram que, considerando-se uma mesma área superficial de polo, a força de repulsão magnética varia em função do comprimento do eixo magnético. Os dados relativos ao afastamento foram submetidos a análise de variância (p0,05), tendo-se observado que o aumento da distância entre os magnetos diminui significantemente a força de repulsão magnética na maioria dos corpos de prova. No afastamento 0,0 mm as forças magnéticas de repulsão dos subgrupos mantêm uma sequência crescente a partir do subgrupo de menor volume de magnetos ao subgrupo de maior volume de magnetos, os quais permanecem nessa sequência nos afastamentos iniciais

A força de repulsão magnética gerada por magnetos pequenos varia menos em função do aumento do afastamento. Conclui-se que a variação da força de repulsão magnética, dada a mesma área superficial de polo, apresenta uma relação direta com o volume e com o eixo magnético onde, quanto maior o volume ou o comprimento do eixo magnético, maior a força de repulsão magnética. A relação direta entre volume e força de repulsão magnética não se altera frente aos afastamentos inicais, tendendo a se tornar imensurável com o aumento da distância. A força de repulsão magnética mantém uma relação inversa com a distância entre os pares de magnetos. Este ensaio mecânico indica que a força de repulsão magnética apresenta, assim como a força de atração magnética, uma curva hiperbólica de redução frente ao aumento do afastamento.

Neodymium Iron Boron (Nd2Fe14B) magnets exhibit excellent magnetic properties and demonstrate biological compatibility, despite of their fragility and low resistance to corrosion. The magnetic attraction forces of rare earth magnets have been used in retention systems mainly associated with osseointegrated implants, in oral and facial prostheses, as well as orthodontic appliances. This study evaluates the repulsion forces of magnets, varying volume and length of magnetic axis when subjected to vertical distance, in order to assess the usefulness of such physical property in clinical situations. Twenty-four specimens, with one or two pairs of Nd2Fe14B magnets, presenting different shapes and various volumes, were subjected to mechanical testing so as to measure magnetic repulsion forces, under conditions of vertical pole face separation ranging from 0.0 to 20.0 mm. Repulsive magnetic force varies depending on the length of the magnetic axis, when considering the same surface area of a pole. Analysis of Variance - (p0.05) indicated that by increasing the distance between the pairs of magnets, magnetic repulsion force significantly reduces in most of the specimens. Starting at a 0.0 mm distance, the magnetic repulsion forces keep an enhancing sequence from lower to higher magnetic volume, holding these characteristics during initials distances. Repulsion magnetic forces generated by small magnets varies less as the distance increases.

The results indicate the repulsion magnetic force variation, fixing the same pole surface area, presenting a direct relationship between volume and magnetic axis, since the increase of the volume or of the magnetic axis length leads to a higher magnetic repulsive force. The relationship between volume and magnetic repulsion force does not vary at initial distance. Nevertheless, when such distance increases, the force between the magnets significantly decreases. The magnetic repulsion force holds an inverse relationship with respect to the distance between magnets pairs. This mechanical test indicates that the magnetic repulsion force, as well the magnetic attraction force, present a hyperbolic curve of force reduction due to the increasing vertical distance.