Lutetium Texaphyrin-Celecoxib Conjugate as a Potential Immuno-Photodynamic Therapy Agent.

Immuno-photodynamic therapy (IPDT) has emerged as a new modality for cancer treatment. Novel photosensitizers can help achieve the promise inherent in IPDT, namely, the complete eradication of a tumor without recurrence. We report here a small molecule photosensitizer conjugate, LuCXB. This IPDT agent integrates a celecoxib (cyclooxygenase-2 inhibitor) moiety with a near-infrared absorbing lutetium texaphyrin photocatalytic core. In aqueous environments, the two components of LuCXB are self-associated through inferred donor-acceptor interactions. A consequence of this intramolecular association is that upon photoirradiation with 730 nm light, LuCXB produces superoxide radicals (O2-•) via a type I photodynamic pathway; this provides a first line of defense against the tumor while promoting IPDT. For in vivo therapeutic applications, we prepared a CD133-targeting, aptamer-functionalized exosome-based nanophotosensitizer (Ex-apt@LuCXB) designed to target cancer stem cells. Ex-apt@LuCXB was found to display good photosensitivity, acceptable biocompatibility, and robust tumor targetability. Under conditions of photoirradiation, Ex-apt@LuCXB acts to amplify IPDT while exerting a significant antitumor effect in both liver and breast cancer mouse models. The observed therapeutic effects are attributed to a synergistic mechanism that combines antiangiogenesis and photoinduced cancer immunotherapy.

Microscopic Cracks Modulate Nucleation and Solid-State Crystallization Tendency of Amorphous Celecoxib.

Drugs have been classified as fast, moderate, and poor crystallizers based on their inherent solid-state crystallization tendency. Differential scanning calorimetry-based heat-cool-heat protocol serves as a valuable tool to define the solid-state crystallization tendency. This classification helps in the development of strategies for stabilizing amorphous drugs. However, microscopic characteristics of the samples were generally overlooked during these experiments. In the present study, we evaluated the influence of microscopic cracks on the crystallization tendency of a poorly water-soluble model drug, celecoxib. Cracks developed in the temperature range of 0-10 °C during the cooling cycle triggered the subsequent crystallization of the amorphous phase. Nanoindentation study suggested minimal differences in mechanical properties between samples, although the cracked sample showed relatively inhomogeneous mechanical properties. Nuclei nourishment experiments suggested crack-assisted nucleation, which was supported by Raman data that revealed subtle changes in intermolecular interactions between cracked and uncracked samples. Celecoxib has been generally classified as class II, i.e., a drug with moderate crystallization tendency. Interestingly, classification of amorphous celecoxib may change depending on the presence or absence of cracks in the amorphous sample. Hence, subtle events such as microscopic cracks should be given due consideration while defining the solid-state crystallization tendency of drugs.

Kinetic and Thermodynamic Interplay of Polymer-Mediated Liquid-Liquid Phase Separation for Poorly Water-Soluble Drugs.

Understanding the interplay between kinetics and thermodynamics of polymer-mediated liquid-liquid phase separation is crucial for designing and implementing an amorphous solid dispersion formulation strategy for poorly water-soluble drugs. This work investigates the phase behaviors of a poorly water-soluble model drug, celecoxib (CXB), in a supersaturated aqueous solution with and without polymeric additives (PVP, PVPVA, HPMCAS, and HPMCP). Drug-polymer-water ternary phase diagrams were also constructed to estimate the thermodynamic behaviors of the mixtures at room temperature. The liquid-liquid phase separation onset point for CXB was detected using an inline UV/vis spectrometer equipped with a fiber optic probe. Varying CXB concentrations were achieved using an accurate syringe pump throughout this study. The appearance of the transient nanodroplets was verified by cryo-EM and total internal reflection fluoresence microscopic techniques. The impacts of various factors, such as polymer composition, drug stock solution pumping rates, and the types of drug-polymer interactions, are tested against the onset points of the CXB liquid-liquid phase separation (LLPS). It was found that the types of drug-polymer interactions, i.e., hydrogen bonding and hydrophobic interactions, are vital to the position and shapes of LLPS in the supersaturation drug solution. A relation between the behaviors of LLPS and its location in the CXB-polymer-water ternary phase diagram was drawn from the findings.

Dual-Functionalized Mesoporous Silica Nanoparticles for Celecoxib Delivery: Amine Grafting and Imidazolyl PEI Gatekeepers for Enhanced Loading and Controlled Release with Reduced Toxicity.

The development of targeted drug delivery systems has been a pivotal area in nanomedicine, addressing challenges like low drug loading capacity, uncontrolled release, and systemic toxicity. This study aims to develop and evaluate dual-functionalized mesoporous silica nanoparticles (MSN) for targeted delivery of celecoxib, enhancing drug loading, achieving controlled release, and reducing systemic toxicity through amine grafting and imidazolyl polyethyleneimine (PEI) gatekeepers. MSN were synthesized using the sol-gel method and functionalized with (3-aminopropyl) triethoxysilane (APTES) to create amine-grafted MSN (MSN-NH2). Celecoxib was loaded into MSN-NH2, followed by conjugation of imidazole-functionalized PEI (IP) gatekeepers synthesized via carbodiimide coupling. Characterization was conducted using Fourier-transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (1H-NMR). Drug loading capacity, entrapment efficiency, and in vitro drug release at pH 5.5 and 7.4 were evaluated. Cytotoxicity was assessed using the MTT assay on RAW 264.7 macrophages. The synthesized IP was confirmed by FTIR and 1H-NMR. Amine-grafted MSN demonstrated a celecoxib loading capacity of 12.91 ± 2.02%, 2.1 times higher than non-functionalized MSN. In vitro release studies showed pH-responsive behavior with significantly higher celecoxib release from MSN-NH2-celecoxib-IP at pH 5.5 compared to pH 7.4, achieving a 33% increase in release rate within 2 h. Cytotoxicity tests indicated significantly higher cell viability for IP-treated cells compared to PEI-treated cells, confirming reduced toxicity. The dual-functionalization of MSN with amine grafting and imidazolyl PEI gatekeepers enhances celecoxib loading and provides controlled pH-responsive drug release while reducing systemic toxicity. These findings highlight the potential of this advanced drug delivery system for targeted anti-inflammatory and anticancer therapies.

Design and Evaluation of NSAID Derivatives as AKR1C3 Inhibitors for Breast Cancer Treatment through Computer-Aided Drug Design and In Vitro Analysis.

Breast cancer is a major global health issue, causing high incidence and mortality rates as well as psychological stress for patients. Chemotherapy resistance is a common challenge, and the Aldo-keto reductase family one-member C3 enzyme is associated with resistance to anthracyclines like doxorubicin. Recent studies have identified celecoxib as a potential treatment for breast cancer. Virtual screening was conducted using a quantitative structure-activity relationship model to develop similar drugs; this involved backpropagation of artificial neural networks and structure-based virtual screening. The screening revealed that the C-6 molecule had a higher affinity for the enzyme (-11.4 kcal/mol), a lower half-maximal inhibitory concentration value (1.7 µM), and a safer toxicological profile than celecoxib. The compound C-6 was synthesized with an 82% yield, and its biological activity was evaluated. The results showed that C-6 had a more substantial cytotoxic effect on MCF-7 cells (62%) compared to DOX (63%) and celecoxib (79.5%). Additionally, C-6 had a less harmful impact on healthy L929 cells than DOX and celecoxib. These findings suggest that C-6 has promising potential as a breast cancer treatment.

Celecoxib-tramadol co-crystal in patients with moderate-to-severe pain following bunionectomy with osteotomy: A phase 3, randomized, double-blind, factorial, active- and placebo-controlled trial.

BACKGROUND: Celecoxib-tramadol co-crystal (CTC) is a first-in-class analgesic co-crystal of celecoxib and racemic tramadol with an improved pharmacologic profile, conferred by the co-crystal structure, compared with its active constituents administered alone/concomitantly. AIM: We evaluated CTC in moderate-to-severe acute postoperative pain. MATERIALS AND METHODS: This randomized, double-blind, factorial, active- and placebo-controlled phase 3 trial (NCT03108482) was conducted at 6 US clinical research centers. Adults with moderate-to-severe acute pain following bunionectomy with osteotomy were randomized to oral CTC (200 mg [112 mg celecoxib/88 mg rac-tramadol hydrochloride] every 12 h), tramadol (50 mg every 6 h), celecoxib (100 mg every 12 h), or placebo for 48 h. Patients, investigators, and personnel were blinded to assignment. The primary endpoint was the 0-48 h sum of pain intensity differences (SPID0-48) in all randomized patients. Pain intensity was assessed on a 0-10 numerical rating scale (NRS). Safety was analyzed in patients who received study medication. Funded by ESTEVE Pharmaceuticals. RESULTS: In 2017 (March to November), 1323 patients were screened and 637 randomized to CTC (n = 184), tramadol (n = 183), celecoxib (n = 181), or placebo (n = 89). Mean baseline NRS was 6.7 in all active groups. CTC had a significantly greater effect on SPID0-48 (least-squares mean: -139.1 [95% confidence interval: -151.8, -126.5]) than tramadol (-109.1 [-121.7, -96.4]; p < 0.001), celecoxib (-103.7 [-116.4, -91.0]; p < 0.001), or placebo (-74.6 [-92.5, -56.6]; p < 0.001). Total treatment-emergent adverse events (TEAEs) were 358 for CTC and 394 for tramadol. Drug-related TEAEs occurred in 37.7% patients in the CTC group, compared with 48.6% in the tramadol group. There were no serious TEAEs/deaths. CONCLUSION: CTC provided greater analgesia than comparable daily doses of tramadol and celecoxib, with similar tolerability to tramadol. CTC is approved in the United States.

Low-Frequency Raman Spectroscopy as an Avenue to Determine the Transition Temperature of ß- and γ-Relaxation in Pharmaceutical Glasses.

In an earlier investigation, low-frequency Raman (LFR) spectroscopy was shown to detect the transition temperature of the ß-relaxation (Tß) in both amorphous celecoxib and various celecoxib amorphous solid dispersions [Be̅rzins, K. Mol. Pharmaceutics 2021, 18(10), 3882-3893]. In this study, we further investigated the application of this technique to determine Tß, an important parameter for estimating crystallization potency of amorphous drugs. Alongside commercially available amorphous drugs (zafirlukast and valsartan disodium salt), differently melt-quenched samples of cimetidine were also analyzed. Overall, the variable-temperature LFR measurements allowed for an easy access to the desired information, including the even lesser transition of the tertiary relaxation motions (Tγ). Thus, the obtained results not only highlighted the sensitivity, but also the practical usefulness of this technique to elucidate (subtle) changes in molecular dynamics within amorphous pharmaceutical systems.

Trimethoxyphenyl containing compounds: Synthesis, biological evaluation, nitric oxide release, modeling, histochemical and histopathological studies.

Novel series of trimethoxy phenyl containing chalcone 3, 5, 6, 7, pyrazoline 4a&b, 9a-h and pyrazole 10a&b scaffolds were designed and synthesized. They were characterized by spectral data and elemental analyses. All newly synthesized compounds were screened for their in vitro COX-1/COX-2 inhibitory activities and in vivo anti-inflammatory activity. All the target compounds showed COX-2 inhibitory activity over COX-1. Compound 5c was the most active derivative with higher COX-2 inhibitory activity (IC50 = 0.039 µM) than celecoxib (IC50 = 0.045 µM), and selectivity index value of 321.28 nearly equal to that of celecoxib (S.I. = 326.66). Four additional derivatives 5a, 6, 8b and 9f exhibited excellent COX-2 inhibitory activity (IC50 = 0.041 - 0.049 µM) if compared to the reference drug, celecoxib, with selectivity index values (S.I. = 230.61 - 278.05). Additionally, prolonged in vivo A.I activity was observed in compounds 9e, 9 g, 10a and 10b with % inhibition ranged from 33.21 to 44.52%, after 7 h from carrageenan injection. Compound 9e appeared normal without degeneration similar to celecoxib as resulted from histolopathogical study. Compounds containing NO releasing moieties, 7, 10a and 10b were assesses to overcome the gastrointestinal side effects. Molecular modeling study was operated and achieved a parallel correlation with in vitro COX-2 assay results. Pharmacokinetic study for all the prepared compounds was developed.

Anti-inflammatory, ulcerogenic and platelet activation evaluation of novel 1,4-diaryl-1,2,3-triazole neolignan-celecoxib hybrids.

This study reports the synthesis of novel neolignans-celecoxib hybrids and the evaluation of their biological activity. Analogs8-13(L13-L18) exhibited anti-inflammatory activity, inhibited glycoprotein expression (P-selectin) related to platelet activation, and were considered non- ulcerogenic in the animal model, even with the administration of 10 times higher than the dose used in reference therapy. In silico drug-likeness showed that the analogs are compliant with Lipinski's rule of five. A molecular docking study showed that the hybrids8-13(L13-L18) fitted similarly with celecoxib in the COX-2 active site. According to this data, it is possible to infer that extra hydrophobic interactions and the hydrogen interactions with the triazole core may improve the selectivity towards the COX-2 active site. Furthermore, the molecular docking study with P-selectin showed the binding affinity of the analogs in the active site, performing important interactions with amino acid residues such as Tyr 48. Whereas the P-selectin is a promising target to the design of new anti-inflammatory drugs with antithrombotic properties, a distinct butterfly-like structure of 1,4-diaryl-1,2,3-triazole neolignan-celecoxib hybrids synthesized in this work may be a safer alternative to the traditional COX-2 inhibitors.

Bioavailability of Celecoxib Formulated with Mesoporous Magnesium Carbonate-An In Vivo Evaluation.

An attractive approach to increase the aqueous apparent solubility of poorly soluble drugs is to formulate them in their amorphous state. In the present study, celecoxib, a poorly soluble drug, was successfully loaded into mesoporous magnesium carbonate (MMC) in its amorphous state via a solvent evaporation method. Crystallization of celecoxib was suppressed, and no reaction with the carrier was detected. The MMC formulation was evaluated in vitro and in vivo in terms of oral bioavailability. Celebra®, a commercially available formulation, was used as a reference. The two celecoxib formulations were orally administrated in male rats (average of n = 6 animals per group), and blood samples for plasma were taken from all animals at different time points after administration. There was no statistical difference (p > 0.05) in AUCinf between the two formulations. The results showed that MMC may be a promising drug delivery excipient for increasing the bioavailability of compounds with solubility-limited absorption.

Potent Phenylpyridine and Oxodihydrofuran Inhibitors of Cyclooxygenase-2: Optimization toward a Long Residence Time with Balanced Internal Energetics.

Long residence time enzyme inhibitors with a two-step binding mechanism are characterized by a high internal energy barrier for target association. This raises the question of whether optimizing residence time via further increasing this internal energy barrier would inevitably lead to insufficient target occupancy in vivo due to slow, time-dependent binding. We attempted to address this question during optimization of cyclooxygenase-2 (COX-2) inhibitors. Defining long residence time drugs with acceptable association and dissociation rate constants required for sufficient target occupancy and sustained efficacy, which we termed "balanced internal energetics", provides an important criterion for successful progression during lead optimization. Despite the advancement of several COX-2 inhibitors to marketed drugs, their detailed inhibition kinetics have been surprisingly limiting especially during the structure-activity relationship process mainly due to the lack of robust kinetic assays. Herein, we describe a reoptimized COX enzymatic assay and a novel MS-based assay enabling detailed mechanistic studies for identifying long residence time COX-2 inhibitors with balanced internal energetics. These efforts led to the discovery of promising leads possessing dissociation half-lives of ≤40 h, much greater than the values of 6 and 0.71 h for two marketed drugs, etoricoxib and celecoxib, respectively. Importantly, the inhibition rate constants remain comparable to those of the marketed drugs and above the lower limits set by the criteria of balanced internal energetics, predicting sufficient target occupancy required for efficacy. Taken together, this study demonstrates the feasibility of increasing the internal energy barrier as a viable approach for lead optimization toward discovering long residence time drug candidates.

Impact of Hydroxypropyl Methylcellulose Acetate Succinate Critical Aggregation Concentration on Celecoxib Supersaturation.

Polymers play an important role in amorphous solid dispersions (ASDs), enhancing stability in the solid state and maintaining supersaturation in aqueous solutions of intrinsically low-water-soluble drug candidates. Hydroxypropyl methylcellulose acetate succinate (HPMCAS) is widely used in ASDs due to its hydrophobic/hydrophilic balance and ionizability of the substituent functionalities. While colloid formation of HPMCAS in solution due to this hydrophobic/hydrophilic balance has been studied, the impact of the polymer conformation (random coil vs aggregated) on drug supersaturation of ASDs is not well understood. To our knowledge, this is the first report where the critical aggregation concentration for three grades of HPMCAS (HF/MF/LF) has been determined via fluorescence spectroscopy using the environment-sensitive probe pyrene. The specific impact of polymer conformation (random coil vs aggregate) on the model drug celecoxib (CLX) has been elucidated with fluorescence quenching and nuclear magnetic resonance (NMR) spectroscopy. A negative deviation of the Stern-Volmer plot indicated that aggregated HPMCAS effectively blocked the quencher's access to CLX. This is further supported by NMR observations, where NMR spectra indicate a larger change of chemical shift of the -NH group of CLX when HPMCAS is above its aggregated concentration, suggesting strong H-bonding interactions between aggregated HPMCAS and CLX. Finally, the supersaturation-precipitation study shows that all three grades of HPMCAS in the aggregated state significantly enhanced CLX supersaturation compared to the nonaggregated state, indicating that polymer aggregation plays a critical role in maintaining drug supersaturation.

Investigation on Formulation Strategies to Mitigate Compression-Induced Destabilization in Supersaturated Celecoxib Amorphous Solid Dispersions.

Compression-induced destabilization was investigated in various celecoxib amorphous solid dispersions containing hydroxypropyl methylcellulose (HPMC), poly(vinylpyrrolidone)/vinyl acetate copolymer (PVP/VA), or poly(vinylpyrrolidone) (PVP) at a concentration range of 1-10% w/w. Pharmaceutically relevant (125 MPa pressure with a minimal dwell time) and extreme (500 MPa pressure with a 60 s dwell time) compression conditions were applied to these systems, and the changes in their physical stability were monitored retrospectively (i.e., in the supercooled state) using dynamic differential scanning calorimetry (DSC) and low-frequency Raman (LFR) measurements over a broad temperature range (-90 to 200 and -150 to 140 °C, respectively). Both techniques revealed similar changes in the crystallization behavior between samples, where the application of a higher compression force of 500 MPa resulted in a more pronounced destabilization effect that was progressively mitigated with increasing polymer content. However, other aspects such as more favorable intermolecular interactions did not appear to have any effect on reducing this undesirable effect. Additionally, for the first time, LFR spectroscopy was used as a viable technique to determine the secondary or local glass-transition temperature, Tg,ß, a major indicator of the physical stability of neat amorphous pharmaceutical systems.

Utilizing Laser Activation of Photothermal Plasmonic Nanoparticles to Induce On-Demand Drug Amorphization inside a Tablet.

Poor aqueous drug solubility represents a major challenge in oral drug delivery. A novel approach to overcome this challenge is drug amorphization inside a tablet, that is, on-demand drug amorphization. The amorphous form is a thermodynamically instable, disordered solid-state with increased dissolution rate and solubility compared to its crystalline counterpart. During on-demand drug amorphization, the drug molecularly disperses into a polymer to form an amorphous solid at elevated temperatures inside a tablet. This study investigates, for the first time, the utilization of photothermal plasmonic nanoparticles for on-demand drug amorphization as a new pharmaceutical application. For this, near-IR photothermal plasmonic nanoparticles were tableted together with a crystalline drug (celecoxib) and a polymer (polyvinylpyrrolidone). The tablets were subjected to a near-IR laser at different intensities and durations to study the rate of drug amorphization under each condition. During laser irradiation, the plasmonic nanoparticles homogeneously heated the tablet. The temperature was directly related to the rate and degree of amorphization. Exposure times as low as 180 s at 1.12 W cm-2 laser intensity with only 0.25 wt % plasmonic nanoparticles and up to 50 wt % drug load resulted in complete drug amorphization. Therefore, near-IR photothermal plasmonic nanoparticles are promising excipients for on-demand drug amorphization with laser irradiation.

Amorphous Salts Solid Dispersions of Celecoxib: Enhanced Biopharmaceutical Performance and Physical Stability.

Numerous amorphous solid dispersion (ASD) formulations of celecoxib (CEL) have been attempted for enhancing the solubility, dissolution rate, and in vivo pharmacokinetics via high drug loading, polymer combination, or by surfactant addition. However, physical stability for long-term shelf life and desired in vivo pharmacokinetics remains elusive. Therefore, newer formulation strategies are always warranted to address poor aqueous solubility and oral bioavailability with extended shelf life. The present investigation elaborates a combined strategy of amorphization and salt formation for CEL, providing the benefits of enhanced solubility, dissolution rate, in vivo pharmacokinetics, and physical stability. We generated amorphous salts solid dispersion (ASSD) formulations of CEL via an in situ acid-base reaction involving counterions (Na+ and K+) and a polymer (Soluplus) using the spray-drying technique. The generated CEL-Na and CEL-K salts were homogeneously and molecularly dispersed in the matrix of Soluplus polymer. The characterization of generated ASSDs by differential scanning calorimetry revealed a much higher glass-transition temperature (Tg) than the pure amorphous CEL, confirming the salt formation of CEL in solid dispersions. The micro-Raman and proton nuclear magnetic resonance spectroscopy further confirmed the formation of salt at the -S═O position in the CEL molecules. CEL-Na-Soluplus ASSD exhibited a synergistic enhancement in the aqueous solubility (332.82-fold) and in vivo pharmacokinetics (9.83-fold enhancement in the blood plasma concentration) than the crystalline CEL. Furthermore, ASSD formulations were physically stable for nearly 1 year (352 days) in long-term stability studies at ambient conditions. Hence, we concluded that the ASSD is a promising strategy for CEL in improving the physicochemical properties and biopharmaceutical performance.

Combined Effect of the Preparation Method and Compression on the Physical Stability and Dissolution Behavior of Melt-Quenched Amorphous Celecoxib.

In an earlier investigation, amorphous celecoxib was shown to be sensitive to compression-induced destabilization. This was established by evaluating the physical stability of uncompressed/compressed phases in the supercooled state (Be̅rzins . Mol. Pharmaceutics, 2019, 16(8), 3678-3686). In this study, we investigated the ramifications of compression-induced destabilization in the glassy state as well as the impact of compression on the dissolution behavior. Slow and fast melt-quenched celecoxib disks were compressed with a range of compression pressures (125-500 MPa) and dwell times (0-60 s). These were then monitored for crystallization using low-frequency Raman spectroscopy when kept under dry (∼20 °C; <5% RH) and humid (∼20 °C; 97% RH) storage conditions. Faster crystallization was observed from the samples, which were compressed using more severe compression parameters. Furthermore, crystallization was also affected by the cooling rate used to form the amorphous phases; slow melt-quenched samples exhibited higher sensitivity to compression-induced destabilization. The behavior of the melt-quench disks, subjected to different compression conditions, was continuously monitored during dissolution using low-frequency Raman and UV/vis for the solid-state form and dissolution properties, respectively. Surprisingly the compressed samples exhibited higher apparent dissolution (i.e., higher area under the dissolution curve and initial celecoxib concentration in solution) than the uncompressed samples; however, this is attributed to biaxial fracturing throughout the compressed compacts yielding a greater effective surface area. Differences between the slow and fast melt quenched samples showed some trends similar to those observed for their storage stability.

Celebrex derivatives: Synthesis, α-glucosidase inhibition, crystal structures and molecular docking studies.

Celebrex (1), commonly used as an anti-inflammatory drug, was functionalized (compounds 2-9) to identify new α-glucosidase inhibitors. Initially, all the synthesized derivatives were evaluated for anti-inflammatory activity but none was found to be active. Subsequently a random biological screening was carried out. Interestingly many of them were found to be potent α-glucosidase inhibitors in vitro. All the structures of synthesized derivatives were deduced through 1H NMR, FAB-MS, HR-MS, FT-IR analysis. The single-crystal X-ray structures of compounds 1, and 5 further confirmed the assigned structures. Compounds exhibited a potent α-glucosidase inhibitory activity (IC50 = 92.32 ± 1.530-445.20 ± 1.04 µM) against tested standard acarbose (IC50 = 875.75 ± 2.08 µM), except compounds 2 and 4, which appeared as inactive. Among them, compound 9 (IC50 = 92.32 ± 1.530 µM) was the most potent inhibitor of α-glucosidase enzyme. Molecular docking studies revealed that compounds 6, and 9 interacted with the key amino acid residues of α-glucosidase via H-bonding, and π-π stacking interactions. α-Glucosidase is a key target for the anti-diabetic drug development, and its inhibitors are known to exert anti hyperglycemic effect and help in lowering of post-prandial blood glucose levels.

Synthesis and Biological Evaluation of Salicylic Acid Analogues of Celecoxib as a New Class of Selective Cyclooxygenase-1 Inhibitor.

A series of salicylic acid analogues of celecoxib where the phenylsulfonamide moiety in the structure of celecoxib is replaced by salicylic acid moiety was synthesized and tested for in vitro cyclooxygenase (COX)-1 and COX-2 enzyme inhibition. Among the series, 5-substituted-2-hydroxy-benzoic acid analogues (7a-7h) generally showed better inhibitory activities on both enzymes than 4-substituted-2-hydroxy-benzoic acid analogues (12a-12h). In particular, the chloro analogue 7f which had the highest inhibitory effect (IC50 = 0.0057 µM) to COX-1 with excellent COX-1 selectivity (SI = 768) can be classified as a new potent and selective COX-1 inhibitor. The high inhibitory potency of 7f was rationalized through the docking simulation of this analogue in the active site of COX-1 enzyme.

The Effect of the Molecular Weight of Polyvinylpyrrolidone and the Model Drug on Laser-Induced In Situ Amorphization.

Laser radiation has been shown to be a promising approach for in situ amorphization, i.e., drug amorphization inside the final dosage form. Upon exposure to laser radiation, elevated temperatures in the compacts are obtained. At temperatures above the glass transition temperature (Tg) of the polymer, the drug dissolves into the mobile polymer. Hence, the dissolution kinetics are dependent on the viscosity of the polymer, indirectly determined by the molecular weight (Mw) of the polymer, the solubility of the drug in the polymer, the particle size of the drug and the molecular size of the drug. Using compacts containing 30 wt% of the drug celecoxib (CCX), 69.25 wt% of three different Mw of polyvinylpyrrolidone (PVP: PVP12, PVP17 or PVP25), 0.25 wt% plasmonic nanoaggregates (PNs) and 0.5 wt% lubricant, the effect of the polymer Mw on the dissolution kinetics upon exposure to laser radiation was investigated. Furthermore, the effect of the model drug on the dissolution kinetics was investigated using compacts containing 30 wt% of three different drugs (CCX, indomethacin (IND) and naproxen (NAP)), 69.25 wt% PVP12, 0.25 wt% PN and 0.5 wt% lubricant. In perfect correlation to the Noyes-Whitney equation, this study showed that the use of PVP with the lowest viscosity, i.e., the lowest Mw (here PVP12), led to the fastest rate of amorphization compared to PVP17 and PVP25. Furthermore, NAP showed the fastest rate of amorphization, followed by IND and CCX in PVP12 due to its high solubility and small molecular size.

Increasing the Transport of Celecoxib over a Simulated Intestine Cell Membrane Model Using Mesoporous Magnesium Carbonate.

In the current work, mesoporous magnesium carbonate (MMC) was used to suppress crystallization of the poorly soluble drug celecoxib (CXB). This resulted in both a higher dissolution rate and supersaturation of the substance in vitro as well as an increased transfer of CXB over a Caco-2 cell membrane mimicking the membrane in the small intestine. The CXB flux over the cell membrane showed a linear behavior over the explored time period. These results indicate that MMC may be helpful in increasing the bioavailability and obtaining a continuous release of CXB, and similar substances, in vivo. Neusilin US2 was used as a reference material and showed a more rapid initial release with subsequent crystallization of the incorporated CXB in the release media. The presented results form the foundation of future development of MMC as a potential carrier for poorly soluble drugs.