Coffee-stained tooth enamel color restoration and surface abrasion with whitening and regular toothpaste.

PURPOSE: To evaluate the effectiveness of whitening toothpaste in restoring tooth color after coffee staining and its potential impact on enamel surfaces compared with regular toothpaste. METHODS: Bovine tooth enamel specimens were prepared and stained with coffee solutions before undergoing brushing simulation with different toothpaste slurries (whitening, regular, reference). For precise evaluation, spectrophotometric measurements were taken at intervals to assess color changes using the CIELAB (Commission Internationale de l'Éclairage Lab*) color space. Additionally, profilometric measurements were taken to determine the impact of toothpaste type on the roughness and abraded depth of the enamel surface. To understand the effects of toothpaste and brushing on color change, surface roughness, and abraded depth, while also considering correlations between these factors, the findings were analyzed using mixed-effects models. RESULTS: The whitening toothpaste group demonstrated the highest recovery rate (71%) after 10,000 brushstrokes, followed by the regular toothpaste group (48%) and the reference slurry group (43%). The mixed-effects model analysis revealed that the reference group had a smaller change in lightness (ΔL) than those in the regular toothpaste group. The whitening toothpaste group showed a greater change in lightness on average than those in the regular toothpaste group, with an increase in lightness as the number of brushstrokes increased. According to the roughness and abraded depth data, the whitening toothpaste group was least affected by brushing, while the reference and regular toothpaste groups showed higher levels of roughness and abraded depth at all intervals. CLINICAL SIGNIFICANCE: Gaining a thorough understanding of the effectiveness of whitening toothpaste and its impact on the enamel surface plays a crucial role in refining toothpaste formulations and advancing tooth whitening techniques in dental care.

Effect of fluoride or chitosan toothpaste and at-home bleaching in enamel roughness, tooth color, and staining susceptibility.

PURPOSE: To evaluate how fluoride- or chitosan-based toothpaste used during at-home bleaching affects enamel roughness, tooth color, and staining susceptibility. METHODS: Bovine enamel blocks were submitted to a 14-day cycling regime considering a factorial design (bleaching agent x toothpaste, 2 x 3), with n=10: (1) bleaching with 16% carbamide peroxide (CP) or 6% hydrogen peroxide (HP), and (2) daily exposure of a fluoride (1,450 ppm F-NaF) toothpaste (FT), chitosan-based toothpaste (CBT), or distilled water (control). Then, 24 hours after the last day of bleaching procedure the samples were exposed to a coffee solution. Color (ΔEab, ΔE00, L*, a*, b*) and roughness (Ra, µm) analyses were performed to compare the samples initially (baseline), after bleaching, and after coffee staining. The results were evaluated by linear models for repeated measures (L*, a*, b*, and Ra), 2-way ANOVA (ΔEab, ΔE00) and Tukey's test (α= 0.05). RESULTS: After the at-home bleaching procedure (toothpaste vs. time, P< 0.0001), the toothpaste groups presented a statistically lower Ra than the control (CBT 0.05). After coffee exposure, CBT presented lower ΔEab and ΔE00 values in the HP groups (toothpaste, P< 0.0001), and lower b* and a* values in the CP groups (toothpaste vs. time, P= 0.004). CLINICAL SIGNIFICANCE: Fluoride or chitosan delivered by toothpaste can reduce surface alterations of the enamel during at-home bleaching, without affecting bleaching efficacy.

Effects of natural products-based dentifrices on acrylic resin for denture bases: A simulated period of 4 years.

PURPOSE: To evaluate the antimicrobial activity of dentifrices based on Malva sylvestris and propolis and the effect on the acrylic resin. METHODS: The inhibitory effect against Candida albicans, Enterococcus faecalis and Streptococcus mutans was determined. The specimens of resin were divided into groups: Control (brushing with distilled water); brushing with Colgate; brushing with Protex; brushing with Malvatricin, brushing with Proporalcare Dental Gel and brushing with Green Propolis Dental Gel. Brushing was carried out in a brushing machine. Roughness and color were assessed. The data were analyzed by ANOVA, followed by the Bonferroni post test (α= 0.05). RESULTS: The products evaluated showed antimicrobial activity against all microorganisms (P< 0.05), except Proporalcare Dental Gel, which was not effective against E. faecalis. Greater roughness (P< 0.05) was observed in the samples treated with Colgate. The samples from control and Protex groups showed the lowest color variation and the highest luminosity, with a difference in relation to the others (P< 0.05), which showed higher values, although clinically acceptable. CLINICAL SIGNIFICANCE: The dentifrices based on natural products can be indicated for cleaning prostheses, since they showed antimicrobial activity and did not cause perceptible color changes of the resin tested. The dentifrices did not produce adverse effects on the surface of the resin or did so less than the conventional dentifrice.

Examination of cytotoxic and antimicrobial effect of whitening toothpastes: an in vitro study.

OBJECTIVE: Toothpastes are widely used to protect oral and teeth health. This study aims to examine the cytotoxic and antimicrobial effects of whitening toothpastes. METHODS: In this study, extracts were prepared according to ISO 10993-12:2021 standard (0.2 g/mL) using whitening and conventional toothpastes. The prepared extracts were added to human gingival fibroblast cell lines (HGF-1) in different dilutions (1:1, 1:2, 1:4, 1:8, 1:16, and 1:32) and a cytotoxicity test was performed. Antimicrobial analysis of toothpastes was performed on Streptococcus mutans, Staphylococcus aureus, and Candida albicans using the hole-plate diffusion method. Cell viability and microbial analysis data were examined using two-way analysis of variance (ANOVA) and Tukey post-hoc test (p < 0.05). RESULTS: Toothpastes with sodium lauryl sulfate (SLS) in their composition showed statistically more toxic effects (p < 0.05). The activated carbon toothpastes without SLS showed over 90% cell viability after dilution. Although the dilution rate of toothpastes containing SLS increased, cell viability remained below 70%. All toothpastes used in the study showed antimicrobial effects on S. mutans, S. aureus, and C. albicans. Toothpaste containing hydrogen peroxide and SLS produced more antibacterial effects than activated carbon, blue covarine, microparticles, and conventional toothpaste. CONCLUSIONS: SLS-containing toothpastes showed more toxicity on HGF-1 cells. Toothpaste containing hydroxyapatite did not show toxic effects on HGF-1 cells. SLS, sodium lauryl sarcosinate and hydrogen peroxide in toothpastes increase antimicrobial effects.

Ultrastructural investigation of the effect of toothpastes containing different remineralizing agents on demineralized enamel.

OBJECTIVE: The present study aimed to evaluate the effect of remineralizing agents on demineralized enamel intended for use as fluoride substitutes or supplements for oral hygiene applications. METHODOLOGY: Enamel samples were obtained from 30 bovine teeth. The enamel blocks were stored in 20 mL of demineralization solution for 72 h. They were then brushed with the following toothpaste for the remineralization protocol: NaF, NaF/SnF2 combination, NovaMin, or nano-hydroxyapatite. SEM/EDX examinations and microhardness measurements of the samples were performed to investigate the remineralization efficacy of the studied toothpaste. One-way analysis of variance (ANOVA) with post hoc Tukey's HSD test was used to analyze the change in microhardness values in different remineralization protocols (p < 0.05). RESULTS: Differences in the mean remineralization (%RP) and hardness recovery (%HR) were determined between the groups (p < 0.05). Groups 1 and 4 showed significant differences in %RP (p < 0.05). In the SEM/EDX examinations, the samples treated with n-HAp showed an accumulation of crystal deposits on the enamel surface, although at a lower density than those treated with NaF and NaF/SnF2 combination. CONCLUSION: The remineralization strategy in toothpaste plays an important role in enamel remineralization. NovaMin-containing toothpaste showed positive effects on the enamel surface with better Ca/P ratio. Toothpastes containing n-HAp triggered less change in the increase of microhardness values compared to other toothpastes. The use of SnF2 in toothpaste in combination with NaF significantly increased the binding of fluoride to demineralized enamel compared to toothpaste containing NaF alone.

Color stability of bleached tooth enamel brushed with different stain-removing toothpastes.

OBJECTIVE: The effects of four toothpastes on the color stability of in-office bleached tooth specimens were determined. MATERIALS AND METHODS: We evaluated an experimental toothpaste (EXP) and three commercially available toothpastes: Colgate Optic White (OPW), Aquafresh White & Protect (AWP), and Crest 3D White (CDW). OPW, AWP, and CDW contained inorganic abrasives, whereas EXP and AWP contained sodium polyphosphate. Forty-eight randomly selected human-extracted maxillary central incisors were bleached and brushed twice daily over 30 days. We analyzed the final color difference (ΔE*ab, ΔE00 , ΔWID ), arithmetic average surface roughness (Ra) of the enamel measured on days 0 and 30, and scanning electron microscopy images of enamel surfaces and toothpastes. ΔE*ab, ΔE00 , ΔWID , and Ra were analyzed using one-way analysis of variance and Tukey's test (α = 0.05). RESULTS: ΔE*ab and ΔE00 values were significantly lower after toothbrushing with EXP, OPW, and CDW than with AWP. OPW induced the greatest positive ΔWID . Ra was significantly increased by OPW and CDW, but slightly increased by AWP, with cube-like particles, and EXP, with no particle-like structures. CONCLUSIONS: Only EXP stabilized the color of bleached teeth without increasing the enamel surface roughness. Sodium polyphosphate with approximately 10 phosphate groups was effective at removing stains. CLINICAL SIGNIFICANCE: The effect of toothpaste on the color stability of bleached teeth depends on the constituting abrasives and chemical components. Polyphosphoric acid has different stain-removal effects depending on its degree of polymerization. Additionally, although certain types of abrasives may be effective for color stability, they also increase the surface roughness of the enamel.

Potential of microbial-derived biosurfactants for oral applications-a systematic review.

BACKGROUND: Biosurfactants are amphiphilic compounds produced by various microorganisms. Current research evaluates diverse types of biosurfactants against a range of oral pathogens. OBJECTIVES: This systematic review aims to explore the potential of microbial-derived biosurfactants for oral applications. METHODOLOGY: A systematic literature search was performed utilizing PubMed-MEDLINE, Scopus, and Web of Science databases with designated keywords. The results were registered in the PROSPERO database and conducted following the PRISMA checklist. Criteria for eligibility, guided by the PICOS framework, were established for both inclusion and exclusion criteria. The QUIN tool was used to assess the bias risk for in vitro dentistry studies. RESULTS: Among the initial 357 findings, ten studies were selected for further analysis. The outcomes of this systematic review reveal that both crude and purified forms of biosurfactants exhibit antimicrobial and antibiofilm properties against various oral pathogens. Noteworthy applications of biosurfactants in oral products include mouthwash, toothpaste, and implant coating. CONCLUSION: Biosurfactants have garnered considerable interest and demonstrated their potential for application in oral health. This is attributed to their surface-active properties, antiadhesive activity, biodegradability, and antimicrobial effectiveness against a variety of oral microorganisms, including bacteria and fungi.

Antibacterial effects of dentifrices against Streptococcus mutans in children: a comparative in vitro study.

Fluoridated dentifrices have antibacterial effects on children's teeth. On the other hand, the side effects encountered with the use of them have led researchers to look for safe alternatives. This study aimed to determine the antibacterial effect of different commercially available fluoride-free dentifrices on Streptococcus mutans (S. mutans) in comparison with different concentrations of fluoridated dentifrices. Study groups comprised of fluoride-free dentifrices, which contain Probiotic (Activated Charcoal Probiotic Dentifrice-Group P), Aloe Vera-Group AV and Salivary Proteins-Group SP. Fluoridated dentifrices containing 1450 ppm fluoride-Control Group 1 and 500 ppm fluoride-Control Group 2 served as control groups. Antibacterial activity was assessed by Minimum Inhibitory Concentrations and agar well diffusion assays on S. mutans. Biofilm inhibition assay was performed with dentifrices, which had antibacterial activities, and a negative control phosphate-buffered saline (Group PBS) on sterile hydroxyapatite discs against S. mutans. Statistical evaluation was performed. Only group AV showed an antibacterial effect on S. mutans, while control groups showed a similar antibacterial effect. The mean number of viable bacteria present in S. mutans biofilm in Control Group 1 and 2 and Group AV were statistically significantly lower than that in Group PBS, but there were no statistically significant differences between Control Groups and Group AV. Antibacterial activity of commercial dentifrices against S. mutans may be exerted by antibacterial components other than fluoride. Aloe vera-containing toothpaste showed an antibacterial effect on S. mutans, although not as much as the fluoride-containing toothpastes in the control groups. However, further in vivo and long-term studies are required.

Effect of experimental toothpaste containing hydroxyapatite nanoparticles and propolis, with and without fluoride, on the microcosm biofilm and enamel demineralization.

This study evaluated the antimicrobial and anticaries effects of toothpaste containing hydroxyapatite nanoparticles (nanoHAP - 5 or 10%), xylitol (2 or 3%) and propolis (1 or 2%), associated or not with 1500 ppm fluoride (F). An in vitro model was used with microcosm biofilm produced from a pool of human saliva and McBain saliva (1:50) in the first 8 h of culture on 162 bovine enamel specimens. At the end of the experimental period, analyses of metabolic activity, colony forming units (CFU) and transverse microradiography (TMR) were performed. This study showed a possible decrease in demineralization and increase in remineralization by the commercial toothpaste (1500 ppm F) and for the experimental toothpaste containing the highest concentration of all agents, combined with F. In addition, a reduction in antimicrobial activity possibly caused by propolis and xylitol, mainly in relation to cariogenic bacteria, was observed.

Interaction between Hexametaphosphate, Other Active Ingredients of Toothpastes, and Erosion-Abrasion in Enamel in vitro.

Sodium hexametaphosphate (HMP) as toothpaste additive is claimed to reduce erosive tooth wear and to stabilize stannous ions. However, little is known about the impact of concentration and its interactions with fluoride (F) or stannous+fluoride ions (F/Sn) on enamel erosion and erosion-abrasion. In a 10 day cyclic in vitro erosion-abrasion model, 320 flat human enamel specimens were divided into ten groups (n = 32 each) and daily subjected to six erosive challenges (0.5% citric acid, 2 min) and two toothpaste suspension applications (2 min, 1:3 F-free toothpaste:mineral-salt solution, 0.23% sodium gluconate). Half of specimens per group were additionally brushed twice/day (200 g, 15 s) during suspension immersion. Nine suspensions contained HMP (0.25%, 1.75%, 3.25%), either on its own or combined with F (373 ppm F-) or F/Sn (800 ppm Sn2+, 373 ppm F-). One suspension contained sodium gluconate only (NegContr). After 10 days, specimens' surfaces were analysed with profilometry, energy dispersive X-ray spectroscopy, and scanning electron microscopy. Tissue loss (µm, mean ± standard deviation) in NegContr was 10.9 ± 2.0 (erosion), 22.2 ± 1.6 (erosion-abrasion). Under erosive conditions, only 0.25% HMP in any combination and 1.75% HMP with F/Sn reduced loss significantly (-28% to -54%); 3.25% HMP without F and F/Sn increased loss significantly (+35%). With additional abrasion, no suspension reduced loss significantly compared to NegContr, instead, in groups without F and F/Sn or with 3.25% HMP loss was increased (+15% to +30%). Conclusively, at higher concentrations, HMP increased erosive tooth wear and seemed to reduce anti-erosive effects of fluoride and stannous ions.

Immediate and Sustained Root Caries Prevention of Fluoride Varnish Combined with Toothpastes.

The aim of this study was to determine the immediate and sustained effect of a fluoride varnish and its combinations with toothpastes in preventing root caries development using a salivary microcosm in vitro model. Human root dentin specimens (n = 150) were randomly divided into 5 experimental protocols (n = 30): (1) Fluoride Varnish (V); (2) V followed by Paste One (V + PO); (3) V followed by Paste Plus (V + PP); (4) V followed by PO and PP (V + PO + PP); and (5) No treatment (control). One varnish layer was applied on the specimens (except for the control group) and kept for 18 h. Then, the varnish was removed and toothpaste treatments were initiated according to experimental groups. For the short-term incubation model (n = 15), the specimens were also immediately subjected to 7-day cariogenic challenge. For that, human saliva was used as bacterial inoculum and McBain artificial saliva containing 2% sucrose as growth medium. The other half of the specimens (n = 15) were used to study the varnish's sustained effect by long-term incubation (8 weeks) before cariogenic challenge. The protocols' anti-caries properties were evaluated by dentin porosity (rhodamine intensity; RI) and mineral density, while their anti-biofilm effects were evaluated using biofilm's biomass and viability assays. For short- and long-term incubation models, all experimental regimens resulted in statistically significant decreases (p < 0.05) in the RI (up to 180 µm and 120 µm, respectively) as well as higher mineral density compared to No treatment (p < 0.001). V + PO + PP and/or V + PO resulted in statistically lower RI compared to V for some depths (p < 0.05) in both models. There were changes in RI and mineral density within groups over time. All experimental treatments exhibited anti-biofilm effects. All prevention protocols exhibited immediate and sustained anti-caries effect against root caries development. The combination of a fluoride varnish with PO resulted in superior additional anti-caries effects.

Comparative evaluation of fluoride-free remineralization agents with and without Er,Cr:YSGG laser on artificial enamel remineralization.

This study aimed to evaluate the efficacy of fluoride-free remineralizing agents in initial enamel caries, with and without combined Er,Cr:YSGG laser application. The remineralization effect of various agents and their combinations on artificial initial caries was investigated using 10 experimental groups (n = 7): NC, negative control; PC, positive control; TM, calcium-phosphate compounds (CPP-ACP); TD, theobromine-containing toothpaste; RG, ROCS® remineralizing gel; L, Er,Cr:YSGG laser (2780 nm; 0.25 W; repetition rate, 20 Hz; pulse duration, 140 µs; tip diameter, 600 µm; without air/water cooling); L + fluoride toothpaste; L + TM; L + TD; and L + RG. The demineralized bovine enamel specimens were subjected to an 8-day pH cycle by daily application of the remineralizing agents and laser therapy once prior to the pH cycle and paste application. The enamel samples underwent the Vickers surface microhardness test, and one sample per group was analyzed with scanning electron microscopy. The Kruskal Wallis test was used to compare the microhardness recovery percentage (SMHR%) for each group, and multiple comparisons were made with the Dunn test. Groups L (p = 0.003), RG (p = 0.019), L + TM (p < 0.001), L + fluoride toothpaste (p = 0.001),and L + RG (p = 0.036) exhibited significant increase in SMHR%. The tested remineralizing agents exhibited no statistically significant difference in effect when used alone and in combination with Er,Cr:YSGG laser. Combined application of Er,Cr:YSGG laser and ROCS® remineralization gel effectively promoted enamel remineralization, while use of CPP-ACP and fluoride toothpaste alone was ineffective. Theobromine-containing toothpaste exhibited the least SMHR%. Long-term evaluation of these agents is recommended.

Combined use of stannous fluoride-containing mouth rinse and toothpaste prevents enamel erosion in vitro.

OBJECTIVE: To compare the protective effect of commercial stannous-containing mouth rinses on enamel erosion in a simulated 5-day in vitro cycling model. MATERIALS AND METHODS: 81 human enamel specimens were embedded in resin blocks and divided into nine groups as follows; group 1: stannous fluoride (1000SnF2) toothpaste; groups 2,3, and 4 were the same as group 1 plus Elmex®, PerioMed™, and Meridol®, respectively, group 5: stannous fluoride (1450SnF2) toothpaste, groups 6, 7, and 8 were the same as group 5 plus Elmex®, PerioMed™, and Meridol®, respectively, group 9: negative control. An erosive challenge was induced with a 1 min hydrochloric acid (0.01 M, pH 2.2) treatment 3 times per day. Each cycle included immersing in the toothpaste slurry twice for two minutes and a one-minute rinse. The enamel slabs were immersed in artificial saliva between each erosive cycle and incubated overnight at 37 °C. Surface hardness loss and enamel loss were determined by Knoop surface hardness and non-contact profilometry, respectively. Finally, enamel surfaces were analyzed by scanning electron microscopy and X-ray energy dispersive spectroscopy (SEM/EDS). RESULTS: All three mouth rinses had similar protective effects against erosion when using adjunct with 1000 SnF2 toothpaste (p > 0.05). With 1450 SnF2 toothpaste, Elmex® presented significantly lower surface hardness loss than Meridol® (p < 0.05). The combined use of Elmex® or PerioMed™ with toothpaste provided significantly better erosion protection than toothpaste alone, either 1000 or 1450 SnF2. In addition, 1000SnF2 toothpaste adjunct with mouth rinse is comparable to 1450 SnF2 toothpaste alone in preventing enamel erosion. CONCLUSION: All three mouth rinses reduced enamel erosion. The additional use of a high concentration stannous containing mouth rinse with 1450 SnF2 toothpaste increases the protective effect against enamel erosion in vitro. CLINICAL SIGNIFICANCE: To date, no standard protocol for preventing dental erosion is available. There are three stannous-containing mouth rinses on the market; however, no study compared their efficacy or indicated whether using adjuncts with anti-erosion toothpaste provides additional benefits. This study found that adding stannous mouth rinse to twice-daily toothpaste increases erosion protection.

Multidisciplinary evaluation of the remineralization potential of three fluoride-based toothpastes on natural white spot lesions.

OBJECTIVES: This in vitro study aimed assessing the remineralization potential of three commercial fluoride-based toothpastes in permanent teeth with natural white spot lesions (WSLs). A multidisciplinary approach based on Raman microspectroscopy (RMS), Scanning electron microscopy (SEM), Energy-dispersive x-ray spectroscopy (EDS), and Vickers microhardness (VMH) was exploited. METHODS: N = 12 human molars with natural WSLs in the proximal-vestibular zone were selected and divided into 4 groups (n = 3) according to the different treatments: HAF (hydroxyapatite with fluoride ions); SMF (sodium monofluorophosphate with arginine); SF (sodium fluoride with enzymes), and CTRL (untreated group). All toothpastes tested contained 1450 ppm of fluoride. Teeth samples were submitted to the following protocol: a 7-day pH cycling treatment, with two daily exposures (2 min each time) to the commercial toothpastes described above. The surface micromorphology (SEM), the chemical/elemental composition (RMS and EDS), and the Vickers microhardness (VMH) were evaluated. Statistical analysis was performed. RESULTS: A remarkable remineralization of WSLs in SEM images was observed in all treated groups compared to CTRL. In particular, HAF and SF displayed higher values of VMH, phosphates amount (I960), crystallinity (FWHM960), and lower ones of C/P (I1070/I960) with respect to CTRL. Intermediate values were found in SMF, higher than CTRL but lower with respect to HAF and SF. As regards the Ca/P ratio, statistically significant differences (p < 0.05) were found between SF and the other groups. CONCLUSIONS: All the tested dentifrices have shown to remineralize the WSLs. SF and HAF have comparable capability in hardness recovery and crystallinity; however, SF shows the best remineralizing potential according to both micromorphological and chemical analyses. Clinical relevance The daily use of toothpastes containing hydroxyapatite partially replaced with fluoride, sodium monofluorophosphate with arginine and sodium fluoride toothpaste associated with enzymes represents a preventive, therapeutic, effective, and non-invasive tool for remineralize WSLs.

Dentin abrasion using whitening toothpaste with various hydrogen peroxide concentrations.

PURPOSE: To compare the amount of abrasion of four whitening toothpastes, two conventional toothpastes, and seven experimental toothpastes with varying concentrations of hydrogen peroxide. METHODS: Bovine dentin specimens were treated with the four whitening toothpastes (containing three different concentrations of hydrogen peroxide: 0.75%, 1.50%, and 2.80%), two conventional toothpastes without hydrogen peroxide, seven experimental toothpastes (concentrations of hydrogen peroxide: 0.75%, 1.50%, 3.0%, 4.50%, 6.0%, 7.50%, and 9.0%), and distilled water. After 10,000 strokes of toothbrushing, the amount of abrasion on the dentin surface was measured with a contactless 3D surface profiler (n= 8). The pH of all solutions, the weight percentages of the particles, and the component of particles in the toothpaste were analyzed. The correlations between the dentin abrasion, pH, and weight percentages of the particles in the toothpastes were investigated. RESULTS: The amount of abrasion of the two conventional toothpastes were 1.1-3.6 times higher than those of the four whitening toothpastes. Likewise, the pH of the conventional toothpaste was higher than those of the other whitening toothpastes. No significant differences were found among the four whitening toothpastes. The four whitening toothpastes consisted of a relatively lower weight percentage of particles compared to the two conventional toothpastes. A strong positive correlation was observed between the dentin abrasion and the weight percentages of the particles (r= 0.913; P< 0.05). Furthermore, no significant differences in the amount of abrasion were observed between the specimens treated with seven experimental toothpastes and those treated with distilled water. CLINICAL SIGNIFICANCE: The whitening toothpastes containing less than 9% hydrogen peroxide did not seem to harm the dentin surface significantly. These findings can serve as a reference for consumers, patients, and dental professionals.

A randomized controlled clinical evaluation of desensitization efficacy of a newly developed toothpaste with highly stabilized SnF2.

PURPOSE: To assess the relief of dentin hypersensitivity of the new toothpaste with stabilized stannous fluoride (SnF2) versus a marketed standard fluoride toothpaste as a negative control and a marketed anhydrous SnF2 toothpaste as a positive control. METHODS: This was a single-centered, randomized, controlled, double blind, clinical trial. 96 participants with hypersensitivity were enrolled in this 4-week clinical study. Electrical stimulation and evaporative air tests were performed to evaluate the desensitization efficacy. Clinical assessments were made at baseline, and after 3 days, 1 week, 2 weeks and 4 weeks of twice-daily brushing. Additionally, the influence of Sn² ⁺ species on desensitization was evaluated using bovine dentin specimens treated with toothpaste. RESULTS: All 96 enrolled participants were randomized. 96 participants completed all evaluations. Participants had an average age (SD) of 47.0 (10.5) years; 45% of participants were female. Both SnF2 toothpastes showed superior desensitization efficacy compared to the negative control toothpaste, the conventional sodium monofluorophosphate (SMFP) toothpaste, after a week. The new stabilized SnF2 toothpaste demonstrated improved electrical stimulation benefits compared to the negative control toothpaste, with increases of 15.1% after 3 days, 34.2% after 1 week, 66.3% after 2 weeks, and 111.6% after 4 weeks. Additionally, it showed relative verbal evaluation scale (VES) benefits of 14.2% after 3 days, 37.6% after 1 week, 28.9% after 2 weeks, and 37.4% after 4 weeks. The stabilized SnF2 toothpaste exhibited desensitization properties comparable to those of a commercial anhydrous SnF2 toothpaste, which typically produces undesirable side effects in the mouth. Toothpastes containing 0.454 % SnF2 exhibited perfect occlusion of dentin tubules. CLINICAL SIGNIFICANCE: The stabilized 0.454% SnF2 toothpaste exhibited significantly greater dentin hypersensitivity relief within only a week and comparable property to commercial anhydrous SnF2 toothpaste.

Which whitening toothpaste with different contents is more effective on color and bond strength of enamel?

OBJECTIVE: To evaluate the effects of six whitening toothpastes with different whitening ingredients as follows: abrasives, polyphosphates, activated charcoal and hydrogen peroxide on the color, and shear bond strength (SBS) of enamel. MATERIALS AND METHODS: Thirty-five extracted human molars were sectioned in mesiodistal direction, providing 70 enamel specimens and randomly divided into seven groups having different whitening ingredients (n = 10). After baseline color measurements, the specimens were brushed three times daily for the 30 s. At the end of 2 weeks, spectrophotometric readings were repeated, and color change parameters were calculated. Then, composite cylinders were built on the enamel surfaces and the specimens were subjected to SBS test. Failure modes were determined under a stereomicroscope (×10). One specimen from each group was examined with scanning electron microscope (SEM). The data were statistically analyzed using Kruskal-Wallis, Wilcoxon signed, one-way-ANOVA (p = 0.05). RESULTS: Clinically acceptable color change was observed in all whitening toothpastes. There were no significant differences among the groups for Δa, ΔL, ΔE00 , and ΔWID (p > 0.05). The differences among the groups were not significant regarding SBS and failure mode distributions (p > 0.05). SEM findings were in line with the SBS test and failure mode distribution results. CONCLUSIONS: All the tested whitening toothpastes showed similar and clinically acceptable efficacy on the color change of the enamel and led to comparable SBS values. CLINICAL SIGNIFICANCE: The tested whitening toothpastes had an acceptable whitening efficacy and did not have a negative effect on the bond strength to the enamel.

Remineralization, color stability and surface roughness of tooth enamel brushed with activated charcoal-based products.

OBJECTIVE: To evaluate the effect of activated charcoal-based (AC) products on color alteration, remineralizing potential and surface roughness of dental enamel. MATERIALS AND METHODS: Bovine incisors were cut into 6 × 6 × 2 mm fragments. Initial color (EasyShade, Vita) and surface roughness (Surfcorder SE1700, Kosakalab) readings were performed. Fragments were separated into five groups (n = 17) according to the treatment: Control: Fluoride toothpaste (Colgate Total 12, Colgate); Charcoal + NaF: AC toothpaste (ACT) with sodium fluoride (Colgate Natural Extracts, Colgate); Charcoal + MFP + n-HA: ACT with sodium monofluorophosphate and nanohydroxyapatite (Black is White, Curaprox); Charcoal: Fluoride-free ACT (ProActive, Hinode); and Charcoal powder: AC powder. Simulated toothbrushing was performed and final color and surface roughness readings were obtained. Fragments were then polished, and initial microhardness (HMV-2, Shimatzu) readings were done. Samples were artificially demineralized and brushed again. Final microhardness readings were taken. Data were statistically analyzed. RESULTS: Fluoride-free charcoal presented the lowest surface roughness alteration (p < 0.05). Charcoal powder had the lowest color change (p < 0.05) and negative values for whiteness index for dentistry alteration. All the groups presented values below whiteness acceptability threshold and negative relative microhardness values. Control showed the highest remineralizing potential (p < 0.05). CONCLUSIONS: ACPs did not produce color alteration different from the fluoride toothpaste, except for Charcoal powder that caused less color change. ACPs caused surface roughness alteration similar to the fluoride toothpaste. ACT with fluoride and AC powder did not have remineralizing potential. CLINICAL SIGNIFICANCE: Activated charcoal-based products (ACP) promise effective tooth whitening and quick results, without teeth damage. In addition, some ACPs contain fluoride in toothpaste composition and promise rehardening potential. However, ACPs are not as effective as other whitening agents and can alter the surface roughness of the enamel. Even if the ACPs contain fluoride or other remineralizing agents, they might be ineffective.

[Effect of Neodymium-Doped Yttrium Aluminum Garnet Laser Combined With Desensitizing Toothpaste on Dentinal Tubule Occlusion Against Acid Challenge].

Objective To assess the effects of different application sequences of neodymium-doped yttrium aluminum garnet(Nd∶YAG)laser and the desensitizing toothpaste containing stannous fluoride on dentinal tubule occlusion.Methods Twelve intact third molars freshly extracted from human were selected and prepared into dentin slices with a thickness of 0.8 mm.Each dentin slice was subdivided into four small slices,three of which were etched with 6% citric acid and randomly assigned to the following three groups(n=12):(1)control group:no treatment;(2)Nd∶YAG+toothbrushing(TB)group:first irradiated with Nd∶YAG laser and then brushed with desensitizing toothpaste;(3)TB+Nd∶YAG group:first brushed with desensitizing toothpaste and then irradiated with Nd∶YAG laser.The Nd∶YAG laser irradiation were carried out at 1 W,15 pulses/s,and the pulse width of 150 µs for 10 s(for a total of 6 cycles).After the above treatment,the 12 dentin slices from the Nd∶YAG+TB and TB+Nd∶YAG groups were randomly assigned to four subgroups(n=3)and subjected to acid etching in the Coca-Cola solution for 0,5,10,and 15 min.A scanning electron microscope was used to observe and photograph the dentin slices in each group,and eight single-blinded examiners scored the slices according to uniform criteria.The analysis of variance was carried out to compared the scores between groups.Results Before acid etching,the dentin tubule occlusion scores of the Nd∶YAG+TB and TB+Nd∶YAG groups were(4.83±0.09) scores and(3.85±0.66) scores,respectively,which had no significant difference between each other(P=0.0590)and were higher than that[(0.10±0.07)scores]of the control group(both P<0.0001).The dentin tubule occlusion scores of the Nd∶YAG+TB group after acid etching for 5,10,and 15 min were(4.33±0.60)scores,(4.27±0.24)scores,and(3.63±0.07)scores,respectively,which were not significantly different from those[(4.04±0.10)scores,(3.76±0.59)scores,and(3.17±0.29)scores,respectively]of the TB+Nd∶YAG group(all P>0.05).In the Nd∶YAG+TB subgroup,the dentin tubule occlusion score after acid etching for 15 min was significantly lower than that before acid etching(P=0.0011).In the TB+Nd∶YAG group,there was no statistically significant difference in the score between before and after acid etching(P>0.05).Conclusions Nd∶YAG laser irradiation with appropriate parameters combined with the use of desensitizing toothpaste could produce an excellent occluding effect on dentinal tubules regardless of the sequence.However,brushing with desensitizing toothpaste followed by Nd∶YAG laser irradiation produced more consistent dentin sealing after acid etching.

Direct and indirect effects of different dentifrices on the initial bacterial colonization of enamel in situ overnight.

OBJECTIVE: The aim of this study was to investigate the direct and indirect influence of fluoridated toothpastes and fluoride-free toothpaste with hydroxyapatite (HAP) as active ingredient on initial bacterial colonization on enamel in situ. METHODS: For this clinical-experimental pilot study, eight subjects were instructed to brush their teeth with three different toothpastes (Elmex® : 1400 ppm AmF, Meridol® : 1400 ppm AmF +SnF2, Karex® : HAP), using each for two consecutive days. As a control, brushing without toothpaste was performed. To evaluate bacterial colonization, subject wore splints with buccally placed bovine enamel platelets overnight. Two modes were tested. In a first pass (regimen A), the splints were inserted after toothbrushing to examine the indirect effects of the dentifrices. In order to investigate the direct effects, the specimens were brushed in situ in a second pass (regimen B). Biofilm formation was visualized and quantified using fluorescence microscopy (DAPI and BacLight) and transmission electron microscopy (TEM). RESULTS: For brushing regimen A (indirect effect of dentifrices), no statistical differences were detected between any of the tested dentifrices or the control. Likewise, no statistically significant differences were recorded for brushing regimen B (direct effect of dentifrices). Furthermore, no differences between the different brushing techniques were determined with regard to the ultrastructure of the overnight biofilm. CONCLUSION: Within the limitations of the present pilot study, it can be concluded that in patients with good oral hygiene, dentifrices and their chemical composition have no statistically significant effect on the initial bacterial colonization of enamel platelets in situ, irrespectively of the mode of application.