Exposures from chrysotile-containing joint compound: evaluation of new model relating respirable dust to fiber concentrations.

The potential for fiber exposure during historical use of chrysotile-containing joint compounds (JCC) has been documented, but the published data are of limited use for reconstructing exposures and assessing worker risk. Consequently, fiber concentration distributions for workers sanding JCC were independently derived by applying a recently developed model based on published dust measurements from sanding modern-day (asbestos-free) joint compound and compared to fiber concentration distributions based on limited historical measurements. This new procedure relies on factors that account for (i) differences in emission rates between modern-day and JCC and (ii) the number of fibers (quantified by phase contrast microscopy [PCM]) per mass of dust generated by sanding JCC, as determined in a bench-scale chamber study using a recreated JCC, that convert respirable dust concentrations to fiber concentrations. Airborne respirable PCM-fiber concentration medians (and 95% confidence intervals) derived for output variables using the new procedure were 0.26 (0.039, 1.7) f/cm(3) and 0.078 (0.013, 0.47) f/cm(3) , and corresponding total fiber concentrations were 1.2 (0.17, 9.2) f/cm(3) and 0.37 (0.056, 2.5) f/cm(3) , in enclosed and nonenclosed environments, respectively. Corresponding estimates of respirable and total PCM fiber concentrations measured historically during sanding of asbestos-containing joint compound-adjusted for differences between peak and time-weighted average (TWA) concentrations and documented analytical preparation and sampling artifacts-were 0.15 (0.019, 0.95) f/cm(3) and 0.86 (0.11, 5.4) f/cm(3) , respectively. The PCM-fiber concentration distributions estimated using the new procedure bound the distribution estimated from adjusted TWA historical fiber measurements, suggesting reasonable consistency of these estimates taking into account uncertainties addressed in this study.

An update of a mortality study of talc miners and millers in Italy.

BACKGROUND: While talc containing asbestiform fibers is considered a human carcinogen, only limited animal and human data are available on non-asbestiform talc. To provide further evaluation on the issue, we updated the analysis of an Italian cohort of talc miners and millers in Val Chisone; talc found here is free from asbestiform fibers. METHODS: The cohort was comprised of 1,795 men who had worked for at least 1 year in the mine and/or in the factory between 1946 and 1995. Vital status and death certificates were obtained from registration offices in the municipality of death or of birth. Employment, termination of employment, and detailed job history were obtained from personnel records at the plant. RESULTS: No excess was found for total cancer mortality, nor mortality for lung cancer. No case of mesothelioma was reported. There was a significant excess mortality from non-neoplastic respiratory diseases (SMR 228.2, 95% CI 190.2-271.5). Mortality excess for non-neoplastic respiratory diseases was mainly due to silicosis. CONCLUSIONS: This study provides additional support for an association between talc in mining and milling and non-neoplastic respiratory diseases, while showing no significant excess risk for lung cancer and mesothelioma. The results also provide additional information of interest to evaluate the potential association between silica and lung cancer.