Bioaerosol Exposures and Respiratory Diseases in Cannabis Workers.

PURPOSE OF REVIEW: This review investigates occupational inhalation hazards associated with biologically derived airborne particles (bioaerosols) generated in indoor cannabis cultivation and manufacturing facilities. RECENT FINDINGS: Indoor cannabis production is growing across the US as are recent reports of respiratory diseases among cannabis workers, including occupational asthma morbidity and mortality. More information is needed to understand how bioaerosol exposure in cannabis facilities impacts worker health and occupational disease risk. Preliminary studies demonstrate a significant fraction of airborne particles in cannabis facilities are comprised of fungal spores, bacteria, and plant material, which may also contain hazardous microbial metabolites and allergens. These bioaerosols may pose pathogenic, allergenic, toxigenic, and pro-inflammatory risks to workers. The absence of multi-level, holistic bioaerosol research in cannabis work environments necessitates further characterization of the potential respiratory hazards and effective risk prevention methods to safeguard occupational health as the cannabis industry continues to expand across the US and beyond.

Thin seams and small mines are associated with higher exposures to respirable crystalline silica in US underground coal mines.

OBJECTIVES: Previous radiologic and histopathologic studies suggest respirable crystalline silica (RCS) overexposure has been driving the resurgence of pneumoconiosis among contemporary US coal miners, with a higher prevalence of severe disease in Central Appalachia. We sought to better understand RCS exposure among US underground coal miners. METHODS: We analysed RCS levels, as measured by respirable quartz, from coal mine dust compliance data from 1982 to 2021. RESULTS: We analysed 322 919 respirable quartz samples from 5064 US underground coal mines. Mean mine-level respirable quartz percentage and mass concentrations were consistently higher for Central Appalachian mines than the rest of the USA. Mean mine-level respirable quartz mass concentrations decreased significantly over time, from 0.116 mg/m3 in 1982 to as low as 0.017 mg/m3 for Central Appalachian mines, and from 0.089 mg/m3 in 1983 to 0.015 mg/m3 in 2020 for the rest of the USA. Smaller mine size, location in Central Appalachia, lack of mine safety committee and thinner coal seams were predictive of higher respirable quartz mass concentrations. CONCLUSIONS: These data substantially support the association between RCS overexposure and the resurgence of coal workers' pneumoconiosis in the USA, particularly in smaller mines in Central Appalachia.

Occupational particle exposure and chronic kidney disease: a cohort study in Swedish construction workers.

OBJECTIVES: Increasing epidemiological and experimental evidence suggests that particle exposure is an environmental risk factor for chronic kidney disease (CKD). However, only a few case-control studies have investigated this association in an occupational setting. Hence, our objective was to investigate associations between particle exposure and CKD in a large cohort of Swedish construction workers. METHODS: We performed a retrospective cohort study in the Swedish Construction Workers' Cohort, recruited 1971-1993 (n=286 089). A job-exposure matrix was used to identify workers exposed to nine different particulate exposures, which were combined into three main categories (inorganic dust and fumes, wood dust and fibres). Incident CKD and start of renal replacement therapy (RRT) were obtained from validated national registries until 2021 and analysed using adjusted Cox proportional hazards models. RESULTS: Exposure to inorganic dust and fumes was associated with an increased risk of CKD and RRT during working age (adjusted HR for CKD at age <65 years 1.15, 95% CI 1.05 to 1.26). The elevated risk did not persist after retirement age. Exposure to cement dust, concrete dust and diesel exhaust was associated with CKD. Elevated HRs were also found for quartz dust and welding fumes. CONCLUSIONS: Workers exposed to inorganic particles seem to be at elevated risk of CKD and RRT. Our results are in line with previous evidence of renal effects of ambient air pollution and warrant further efforts to reduce occupational and ambient particle exposure.

Evaluating silicosis risk: Assessing dust constitution and influence of water as a primary prevention measure in cutting and polishing of silica agglomerates, granite and marble.

An increasing number of silicosis cases have been reported related to the use of silica agglomerates. Many studies agree on the severity of this disease, which often presents with severe clinical forms in young workers and after a short latency period. Are there differences in the composition of dust generated by cutting and polishing with silica agglomerates versus granite and marble? Does the use of water injection reduce the risk associated with the use of these materials? We carried out a comparative observational-analytical study, measuring the concentration of dust generated during different machining operations on three different materials: granite, marble, and silica agglomerates. The effect of water injection on dust generation was evaluated. Personal sampling pumps were used, connected to a cyclone with polyvinyl chloride filters. The flow rate of the pumps was adjusted using a piston flowmeter. Measurements with a cascade impactor were made to assess the size distribution of respirable crystalline silica particles within the respirable fraction. In addition, environmental measurements with a spectrometer were made. 10 tests were carried out on granite and silica agglomerates for each procedure. In the case of marble, with very low silica content, only 2 tests of each type were carried out. Duration of each measurement was between 6 and 25 min. Cleaning times were set for each of the operations. The amount of dust collected in the respirable fraction was 70.85, 32.50 and 35.78 mg/m3 for dry cutting; 6.50, 3.75 and 3.95 mg/m3 for wet cutting; and 21.35, 13.68 and 17.50 mg/m3 for dry polishing, for granite, marble, and silica agglomerates respectively. Dry procedures in marble, silica agglomerates and granite showed higher dust concentration of particles smaller than 0.5 µm. Silica agglomerates showed higher concentrations of respirable crystalline silica particles than granite and marble, mainly with dry procedures. The greater production of small particles in dry and wet procedures with silica agglomerates shows that water injection is an insufficient preventive measure.

TERT-independent telomere elongation and shelterin dysregulation after pulmonary exposure to stainless-steel welding fume in-vivo.

Telomeres are inert DNA sequences (TTAGGG) at the end of chromosomes that protect genetic information and maintain DNA integrity. Emerging evidence has demonstrated that telomere alteration can be closely related to occupational exposure and the development of various disease conditions, including cancer. However, the functions and underlying molecular mechanisms of telomere alteration and shelterin dysregulation after welding fume exposures have not been broadly defined. In this study, we analyzed telomere length and shelterin complex proteins in peripheral blood mononuclear cells (PBMCs) and in lung tissue recovered from male Sprague-Dawley rats following exposure by intratracheal instillation (ITI) to 2 mg/rat of manual metal arc-stainless steel (MMA-SS) welding fume particulate or saline (vehicle control). PBMCs and lung tissue were harvested at 30 d after instillation. Our study identified telomere elongation and shelterin dysregulation in PBMCs and lung tissue after welding fume exposure. Mechanistically, telomere elongation was independent of telomerase reverse transcriptase (TERT) activation. Collectively, our findings demonstrated that welding fume-induced telomere elongation was (a) TERT-independent and (b) associated with shelterin complex dysregulation. It is possible that an alteration of telomere length and its regulatory proteins may be utilized as predictive biomarkers for various disease conditions after welding fume exposure. This needs further investigation.

Worse pulmonary function in association with cumulative exposure to nanomaterials. Hints of a mediation effect via pulmonary inflammation.

BACKGROUND: Today, nanomaterials are broadly used in a wide range of industrial applications. Such large utilization and the limited knowledge on to the possible health effects have raised concerns about potential consequences on human health and safety, beyond the environmental burden. Given that inhalation is the main exposure route, workers exposed to nanomaterials might be at risk of occurrence of respiratory morbidity and/or reduced pulmonary function. However, epidemiological evidence regarding the association between cumulative exposure to nanomaterials and respiratory health is still scarce. This study focused on the association between cumulative exposure to nanomaterials and pulmonary function among 136 workers enrolled in the framework of the European multicentric NanoExplore project. RESULTS: Our findings suggest that, independently of lifelong tobacco smoking, ethnicity, age, sex, body mass index and physical activity habits, 10-year cumulative exposure to nanomaterials is associated to worse FEV1 and FEF25 - 75%, which might be consistent with the involvement of both large and small airway components and early signs of airflow obstruction. We further explored the hypothesis of a mediating effect via airway inflammation, assessed by interleukin (IL-)10, IL-1ß and Tumor Necrosis Factor alpha (TNF-α), all quantified in the Exhaled Breath Condensate of workers. The mediation analysis results suggest that IL-10, TNF-α and their ratio (i.e., anti-pro inflammatory ratio) may fully mediate the negative association between cumulative exposure to nanomaterials and the FEV1/FVC ratio. This pattern was not observed for other pulmonary function parameters. CONCLUSIONS: Safeguarding the respiratory health of workers exposed to nanomaterials should be of primary importance. The observed association between cumulative exposure to nanomaterials and worse pulmonary function parameters underscores the importance of implementing adequate protective measures in the nanocomposite sector. The mitigation of harmful exposures may ensure that workers can continue to contribute productively to their workplaces while preserving their respiratory health over time.

The role of genetic polymorphisms for inducing genotoxicity in workers occupationally exposed to benzene: a systematic review.

Benzene is used worldwide as a major raw material in a number of industrial processes and also a potent airborne pollutant emitted from traffic exhaust fume. The present systematic review aimed to identify potential associations between genetic polymorphisms and occupational benzene-induced genotoxicity. For this purpose, a total of 22 selected studies were carefully analysed. Our results revealed a positive relation between gene polymorphism and genotoxicity in individuals exposed to benzene, since 17 studies (out of 22) observed positive relations between genotoxicity and polymorphisms in xenobiotics metabolizing genes influencing, therefore, individuals' susceptibility to genomic damage induced by benzene. In other words, individuals with some genotypes may show increase or decrease DNA damage and/or higher or lower DNA-repair potential. As for the quality assessment, 17 studies (out of 22) were categorized as Strong or Moderate and, therefore, we consider our findings to be trustworthy. Taken together, such findings are consistent with the notion that benzene induces genotoxicity in mammalian cells being strongly dependent on the genetic polymorphism. Certainly, such findings are important for clarifying the role of biomarkers related to genotoxicity in human biomonitoring studies.

Welding fume exposure and prevalence of chronic respiratory symptoms among welders in micro- and small-scale enterprise in Akaki Kality sub-city, Addis Ababa, Ethiopia: a comparative cross-sectional study.

BACKGROUND: Exposure to welding fumes can lead to different respiratory health disorders, including lung cancer, due to long-term exposures. In Ethiopia, large numbers of people are engaged in the welding sector. Often, these workers are exposed to welding fumes at their workplaces, however, the level of exposure and its health effects have never been studied. OBJECTIVE: To measure the level of personal welding fume exposure and assess chronic respiratory symptoms and associated factors, among micro and small-scale enterprise metal workshop workers, in Akaki Kality Sub city, Ethiopia. METHODS: A comparative cross-sectional study involving 226 welders and 217 controls. Chronic respiratory symptoms were assessed using a standardized questionnaire adopted from the American Thoracic Society (ATS). Welding fumes were collected from the welder's breathing zone using 37 mm close-faced plastic cassettes fitted with Polyvinyl Chloride (PVC) filters connected to Casella pumps at an airflow rate of 2 L/min. RESULT: The overall prevalence of chronic respiratory symptoms among welders and controls were 54 (23.9%) and 20 (9.2%) respectively. The geometric mean and geometric standard deviation (GSD) of personal welding fume exposure, among welders was 5.98 mg/m3 (± GSD = 1.54). In this study, 53.3% of the samples exceeded the Occupational Exposure Limit defined by the American Conference of Governmental Industrial Hygiene. Chronic respiratory symptoms were significantly associated with educational status (Adjusted Odds Ratio (AOR): 5.11, 95% CI: 1.35, 19.33), respiratory protective equipment use (AOR: 3.33, 95% CI: 1.52, 7.31), safety training (AOR: 2.41, 95% CI: 1.10, 5.28), smoking (AOR:3.57, 95% CI: 1.54, 8.23), welding machine maintenance (AOR: 1.87, 95% CI: 1.01, 3.59) and welding site (i.e. indoors vs. outdoor) (AOR: 6.85. 95% CI: 2.36, 19.89). CONCLUSIONS: The prevalence of chronic respiratory symptoms among welding workers was significantly higher than controls. More than half of the samples exceeded the Occupational Exposure Limit. Educational status, implementation of safety training, and welding sites were significantly associated with chronic respiratory symptoms. The results suggested a need to reduce welding fume exposure to improve the respiratory health of the workers.

Impact of welding occupation on serum aluminium level and its association with physical health, cognitive function, and quality of life: a cross-sectional study.

OBJECTIVE: There is an occupational health concern about welders' inhalation of toxic aluminium fumes. We investigated whether serum aluminium level (SAL) and demographic variables can significantly predict physical health parameters, cognition, and quality of life (QoL) among welders. METHODS: The cross-sectional study involved 100 age- and location-matched men (50 welders and 50 non-welders). SAL obtained using a graphite furnace atomic absorption spectrometer, and data collected using blood pressure and body mass index (BMI) apparatuses, biodata form, pain rating scale, General Practitioner Assessment of Cognition, WHOQoL-BREF, and Nordic musculoskeletal symptoms (MSS) questionnaire were analysed using independent samples t test, chi-square, Pearson's correlation, and hierarchical linear regression. RESULTS: Welders had significantly higher SAL (mean difference [MD] = 1.77 µg/L, p < 0.001), lower QoL (MD = 3.92, p = 0.039), and higher prevalence of MSS on the neck (χ2 = 10.187, p = 0.001), shoulder (χ2 = 9.007, p = 0.003), upper back (χ2 = 6.832, p = 0.009), and knee (χ2 = 12.190, p < 0.001) than non-welders. There was a significant bivariate association between SAL, systolic blood pressure (ß = 0.313, p = 0.002), and BMI (ß = 0.279, p = 0.005), but not pain intensity, cognition, or QoL. SAL remained a significant predictor of systolic blood pressure after adjustment for physical health and QoL parameters (ß = 0.191, p = 0.044). The association between SAL and social QoL became significant after adjustment for physical health and other QoL domains (ß = - 0.210, p = 0.032) and demographic variables (ß = - 0.233, p = 0.046). CONCLUSION: Welders had significantly higher SAL, musculoskeletal symptoms, blood pressure, and lower QoL than non-welders. SAL was associated with adverse physical health parameters and social-related QoL, not cognition. We recommend routine aluminium bioavailability and physical health checks among welders.

Relationship between exposure to metalworking fluids and nonalcoholic fatty liver disease.

OBJECTIVE: The relationship between metalworking fluids (MWFs) and nonalcoholic fatty liver disease (NAFLD) has not been previously explored. We aim to investigate the relationship between occupational exposure to MWFs and the prevalence of NAFLD and to determine the cumulative exposure threshold per day. METHODS: In 2020, 2079 employees were selected randomly from one computer numerical control machining factory in Wuxi for a questionnaire survey, and occupational health examinations were conducted at the affiliated branch of Wuxi Eighth People's Hospital. MWF samples were collected within the factory using the National Institute for Occupational Safety and Health (NIOSH) 5524 method. NAFLD was defined as having a hepatic steatosis index (HSI) ≥ 36 without significant alcohol consumption. The relationship between NAFLD and MWFs was analyzed using logistic regression, and the daily exposure threshold was calculated using R software. RESULTS: MWF exposure was found to be a risk factor for NAFLD in exposed workers compared to the non-exposed group. The OR for NAFLD in workers exposed to MWFs compared to controls was 1.42 (95% CI: 1.04-1.95). An increased risk of NAFLD was shown to be associated with an increasing dose. The daily exposure dose threshold to MWFs was found to be 6.54 mg/m3 (OR = 2.09, 95% CI: 1.24-3.52). CONCLUSION: An association between occupational exposure to MWFs and NAFLD was found. As the concentration of exposure rose, the prevalence of NAFLD was also escalated.

Association between exposure to metalworking fluid aerosols, occupational noise and chronic kidney disease: a cross-sectional study in China.

BACKGROUND: Chronic kidney disease (CKD) carries a high public health burden yet little is known about the relationship between metalworking fluid (MWF) aerosols, occupational noise and CKD. We aimed to explore the relationship between occupational MWF aerosols, occupational noise and CKD. METHODS: A total of 2,738 machinists were sampled from three machining companies in Wuxi, China, in 2022. We used the National Institute for Occupational Safety and Health (NIOSH) method 5524 to collect individual samples for MWF aerosols exposure, and the Chinese national standard (GBZ/T 189.8-2007) method to test individual occupational noise exposure. The diagnostic criteria for CKD were urinary albumin/creatinine ratio (UACR) of ≥ 30 mg/g and reduced renal function (eGFR < 60 mL.min- 1. 1.73 m- 2) lasting longer than 3 months. Smooth curve fitting was conducted to analyze the associations of MWF aerosols and occupational noise with CKD. A segmented regression model was used to analyze the threshold effects. RESULTS: Workers exposed to MWF aerosols (odds ratio [OR] = 2.03, 95% confidence interval [CI]: 1.21-3.41) and occupational noise (OR = 1.77, 95%CI: 1.06-2.96) had higher prevalence of CKD than nonexposed workers. A nonlinear and positive association was found between increasing MWF aerosols and occupational noise dose and the risk of CKD. When daily cumulative exposure dose of MWF aerosols exceeded 8.03 mg/m3, the OR was 1.24 (95%CI: 1.03-1.58), and when occupational noise exceeded 87.22 dB(A), the OR was 1.16 (95%CI: 1.04-1.20). In the interactive analysis between MWF aerosols and occupational noise, the workers exposed to both MWF aerosols (cumulative exposure ≥ 8.03 mg/m3-day) and occupational noise (LEX,8 h ≥ 87.22 dB(A)) had an increased prevalence of CKD (OR = 2.71, 95%CI: 1.48-4.96). MWF aerosols and occupational noise had a positive interaction in prevalence of CKD. CONCLUSIONS: Occupational MWF aerosols and noise were positively and nonlinearly associated with CKD, and cumulative MWF aerosols and noise exposure showed a positive interaction with CKD. These findings emphasize the importance of assessing kidney function of workers exposed to MWF aerosols and occupational noise. Prospective and longitudinal cohort studies are necessary to elucidate the causality of these associations.

A study of inflammatory biomarkers in crystalline silica exposed rock drillers.

BACKGROUND: Crystalline silica (CS) exposure can cause serious lung disease in humans, but mechanisms of pulmonary toxicity have not been completely elucidated. AIMS: To assess pro-inflammatory and anti-inflammatory biomarkers and biomarkers related to the development of chronic obstructive pulmonary disease and fibrosis in serum of rock drillers exposed to CS. METHODS: Rock drillers (N = 123) exposed to CS and non-specified particulate matter (PM) were compared to 48 referents without current or past exposure to PM in a cross-sectional study. RESULTS: The rock drillers had been exposed to CS for 10.7 years on average. Geometric mean (GM) current exposure was estimated to 36 µg/m3. Their GM concentration of matrix metalloproteinase 12 (MMP-12) was significantly higher (16 vs. 13 ng/L; p = 0.04), while interleukin (IL) 6 and IL-8 were significantly lower compared to the referents. Also pentraxin 3 was significantly lower (3558 vs. 4592 ng/L; p = 0.01) in the rock drillers. A dose-response relationship was observed between cumulative exposure to CS and MMP-12, the highest exposed subgroup having significantly higher MMP-12 concentrations than the referents. CONCLUSION: Exposure to CS may increase circulating MMP-12 concentrations in a dose-response related fashion. The results may also suggest a down-regulation of pro-inflammatory pathways.

Characterization of fire investigators' polyaromatic hydrocarbon exposures using silicone wristbands.

BACKGROUND: Exposures to polyaromatic hydrocarbons (PAHs) contribute to cancer in the fire service. Fire investigators are involved in evaluations of post-fire scenes. In the US, it is estimated that there are up to 9000 fire investigators, compared to approximately 1.1 million total firefighting personnel. This exploratory study contributes initial evidence of PAH exposures sustained by this understudied group using worn silicone passive samplers. OBJECTIVES: Evaluate PAH exposures sustained by fire investigators at post-fire scenes using worn silicone passive samplers. Assess explanatory factors and health risks of PAH exposure at post-fire scenes. METHODS: As part of a cross-sectional study design, silicone wristbands were distributed to 16 North Carolina fire investigators, including eight public, seven private, and one public and private. Wristbands were worn during 46 post-fire scene investigations. Fire investigators completed pre- and post-surveys providing sociodemographic, occupational, and post-fire scene characteristics. Solvent extracts from wristbands were analyzed via gas chromatography-mass spectrometry (GC-MS). Results were used to estimate vapor-phase PAH concentration in the air at post-fire scenes. RESULTS: Fire investigations lasted an average of 148 minutes, standard deviation ± 93 minutes. A significant positive correlation (r=0.455, p<.001) was found between investigation duration and PAH concentrations on wristbands. Significantly greater time-normalized PAH exposures (p=0.039) were observed for investigations of newer post-fire scenes compared to older post-fire scenes. Regulatory airborne PAH exposure limits were exceeded in six investigations, based on exposure to estimated vapor-phase PAH concentrations in the air at post-fire scenes. DISCUSSION: Higher levels of off-gassing and suspended particulates at younger post-fire scenes may explain greater PAH exposure. Weaker correlations are found between wristband PAH concentration and investigation duration at older post-fire scenes, suggesting reduction of off-gassing PAHs over time. Exceedances of regulatory PAH limits indicate a need for protection against vapor-phase contaminants, especially at more recent post-fire scenes.

Stone mining work and dust pollution in Birbhum district, West Bengal, India.

Dust pollution is common in Indian roads and several industrial settings (including mines) that affects human health. Identification and characterization of the dust particles in the mining area is essential for knowing the properties of the dust that effectively causes ailments to humans, particularly among workers those who are working in unorganized industrial settings. The present study aimed to determine the level of dust pollution and to know the size and characterize the dust particles in the Pachami-Hatgacha stone mine areas of Birbhum district, West Bengal, India. Dust samples were collected and analysed for Dynamic Light Scattering (DLS) to determine the size and shape of the particles, Fourier Transform Infrared Spectroscopy (FT-IR) to determine the free silica content, and X-ray Florence (XRF) analysis for quantitative estimation of components in the sample. All the analyses were done following standard instrumentation and techniques. The size of the dust particles was much less (ranges 101-298 nm) than the size of respirable particles (2500 nm). Those were mostly generated as well as precipitated during peak working hours of the day. Presence of considerable amounts of silica was confirmed by the FT-IR (strong and broad band at 1000 cm-1) and XRF analysis (76.85% SiO2). Exposure to these dust particles may cause severe health impairments. Therefore, interventions like wet drilling and blasting, sprinkling of water during peak working hours, and awareness of use of personal protective devices among workers are required to reduce the risk and hazards associated with dust pollution to the health of miners and inhabitants around the mines.

Asbestos exposures associated with the use and handling of drilling mud additives.

This paper summarizes historical asbestos exposure data collected during the handling of short-fiber chrysotile asbestos that was used as an additive to drilling fluid in oil and gas exploration. A total of 1171 industrial hygiene (IH) personal and area air samples were collected and analyzed from more than 20 drilling rigs between 1972 and 1985. The dataset consists of 1097 short-term samples (<240 min) with more than 80% having sample durations less than 30 min. Average airborne fiber concentrations measured during asbestos handling activities ranged from 0.62 f/cc to 3.39 f/cc using phase-contrast microscopy (PCM). An additional 14 samples were considered long-term samples (>240 min) and there were 60 samples with no reported sample duration. Eight-hour time-weighted average (8-h TWA) results, calculated using short-term samples, along with long-term samples greater than 240 min, did not exceed contemporaneous Occupational Safety and Health Administration (OSHA) permissible exposure limits (PELs). This analysis fills a data gap in the evaluation of asbestos exposures from the use of drilling mud additives (DMAs) that contained chrysotile asbestos.

Exposure to occupational air pollution and vascular endothelial dysfunction in workers of the steel industry in Iran.

Air pollution is recognized as a risk factor for cardiovascular diseases; however, the precise underlying mechanisms remain unclear. This study investigated the impact of occupational air pollution exposure on endothelial function in workers within the steel industry. Specifically, we examined male employees in the coke-making division of the Isfahan Steel Company in Iran, as well as those in administrative roles with no known history of cardiovascular risk. Data on age, body mass index, duration of employment, blood pressure, fasting blood sugar, and lipid profile were collected. To assess endothelial function, flow-mediated dilation (FMD) was measured. The baseline brachial artery diameter was greater (mean difference [95% CI] = 0.068 mm [0.008 to 0.128]), while the FMD was lower (mean difference [95% CI] = -0.908 % [-1.740 to -0.075]) in the coke-making group than in the control group. After controlling for potential confounding variables, it was observed that working in the coke-making sector of the industry was associated with lower FMD (F = 3.954, p = .049). These findings indicated that occupational air pollution exposure among workers in the steel industry is linked to impaired endothelium-dependent vasodilation.

Health risk assessment of occupational exposure to heavy metals among green space workers in Iran.

Exposure to heavy metals can result in various adverse health effects. Tehran is rated as one of the world's most polluted cities. Green space workers are continuously exposed to such pollutants in this city. Thus, this study aimed to estimate the health risks caused by exposure to heavy metals among green space workers. Eighty-eight workers and office personnel in two regions with different air quality levels were chosen for sampling. Air samples were collected using the NIOSH-7300 method and analyzed using an Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) instrument. The hazard quotient (HQ) and the lifetime cancer risk (LTCR) were calculated to assess carcinogenic and non-carcinogenic risk levels. The results revealed that the rank order of heavy metals was determined as Zn, Pb, Mn, Ni, Co, and Cd. Workers were subjected to higher concentrations of Ni, Pb, Zn, and Co than office personnel. Furthermore, the Cd, Co, and Zn exposure levels stood significantly higher in region 6 than in region 14. Non-carcinogenic risk levels for all participants fell within the acceptable range. Moreover, no employee had a carcinogenic risk level within the acceptable range when exposed to Cd. Also, 2.3% of individuals demonstrated Ni's acceptable carcinogenic risk level. Owing unacceptable risk levels, proper interventions are required to minimize occupational exposure to heavy metals. These interventions include optimizing shift schedules, using personal protective equipment, and conducting regular health assessments.

Assessment of genotoxicity biomarkers in gasoline station attendants due to occupational exposure.

Gasoline station attendants are exposed to numerous chemicals that might have genotoxic and carcinogenic potential, such as benzene in fuel vapor and particulate matter and polycyclic aromatic hydrocarbons in vehicle exhaust emission. According to IARC, benzene and diesel particulates are Group 1 human carcinogens, and gasoline has been classified as Group 2A "possibly carcinogenic to humans." At gas stations, self-service is not implemented in Turkey; fuel-filling service is provided entirely by employees, and therefore they are exposed to those chemicals in the workplace during all working hours. Genetic monitoring of workers with occupational exposure to possible genotoxic agents allows early detection of cancer. We aimed to investigate the genotoxic damage due to exposures in gasoline station attendants in Turkey. Genotoxicity was evaluated by the Comet, chromosomal aberration, and cytokinesis-block micronucleus assays in peripheral blood lymphocytes. Gasoline station attendants (n = 53) had higher tail length, tail intensity, and tail moment values than controls (n = 61). In gasoline station attendants (n = 46), the frequencies of chromatid gaps, chromosome gaps, and total aberrations were higher compared with controls (n = 59). Increased frequencies of micronuclei and nucleoplasmic bridges were determined in gasoline station attendants (n = 47) compared with controls (n = 40). Factors such as age, duration of working, and smoking did not have any significant impact on genotoxic endpoints. Only exposure increased genotoxic damage in gasoline station attendants independently from demographic and clinical characteristics. Occupational exposure-related genotoxicity risk may increase in gasoline station attendants who are chronically exposed to gasoline and various chemicals in vehicle exhaust emissions.

Prediction of size-selective permitted daily exposures for mineral oil mist based on an in vitro study in different scenarios.

The incidence of DNA damage from exposure to specific types of metalworking fluids has been reported. In this research, size-selective permissible limits to prevent genotoxic damage in A549 cell lines exposed to two types of mineral oil were estimated for the first time using a benchmark dose approach and extrapolated to workers. The comet assay was performed based on Olive and Banath protocol to determine DNA damage. Then, the Benchmark Dose, the 95% lower bound confidence limit BMD, and the 95% upper-bound confidence limit BMD were determined using continuous response data. Finally, the four Benchmark Dose levels reported in the A549 cell line were extrapolated to the human population in occupational settings in two phases. This study showed when determining the permissible limits, the type used or unused, the type of injury, the organ affected in the body and the size of the particles should also be considered.

Levels and control of welding fume exposure to total particulate, hexavalent chromium, and manganese in contracted activities in an oil refinery setting (2008-2018).

In response to increasing focus on occupational exposures to welding fume, a 10-year series of personal exposure measurements was analyzed for the two main welding processes (Shielded Metal Arc Welding or Stick and Tungsten Inert Gas welding or TIG) used in an oil refinery setting. Exposures from ancillary gouging and grinding were also analyzed. The operations were conducted under a permit-to-work system, which stipulated control measures in the form of ventilation and respiratory protective equipment (RPE) depending on the work environment, base metal, and welding process. The analysis focused on three health hazards of interest: total particulate (TP); hexavalent chromium (Cr (VI)); and manganese (Mn). The study's aims were the analysis of exposure levels related to operational conditions to verify the adequacy of required control measures and the generation of quantitative information for the development of predictive exposure models. Arithmetic mean exposures were 2.01 mg/m3 for TP (n = 94), 13.86 µg/m3 for Cr (VI) (n = 160), and 0.024 mg/m3 for Mn (n = 95). Requirements and practices for ventilation and use of RPE appeared adequate for maintaining exposure levels below maximum use concentrations. Predictive models for mean exposure levels were developed using multiple linear regression. Different patterns emerged for TP, Cr (VI), and Mn exposure determinants. Enclosed or confined work environments were associated with elevated exposure levels, regardless of the provision of local exhaust or general dilution ventilation. Carbon arc, used with gouging and grinding, contributed significantly to TP exposure (p = 0.006). The relative TP source strengths of the two main welding processes were comparable to the literature data. For Cr (VI), stick welding was associated with approximately 50-fold (p < 0.001) higher exposure potential than TIG welding. For Mn, this difference was approximately 2.5-fold. Differences were observed across the three analytes in exposure reduction efficiency of local exhaust ventilation (LEV) compared to natural ventilation, possibly due to ineffective use in confined spaces. These findings contribute to the overall understanding of TP, Cr (VI), and Mn exposures from welding and required controls in an oil refinery setting.