Country-specific net-zero strategies of the pulp and paper industry.

The pulp and paper industry is an important contributor to global greenhouse gas emissions1,2. Country-specific strategies are essential for the industry to achieve net-zero emissions by 2050, given its vast heterogeneities across countries3,4. Here we develop a comprehensive bottom-up assessment of net greenhouse gas emissions of the domestic paper-related sectors for 30 major countries from 1961 to 2019-about 3.2% of global anthropogenic greenhouse gas emissions from the same period5-and explore mitigation strategies through 2,160 scenarios covering key factors. Our results show substantial differences across countries in terms of historical emissions evolution trends and structure. All countries can achieve net-zero emissions for their pulp and paper industry by 2050, with a single measure for most developed countries and several measures for most developing countries. Except for energy-efficiency improvement and energy-system decarbonization, tropical developing countries with abundant forest resources should give priority to sustainable forest management, whereas other developing countries should pay more attention to enhancing methane capture rate and reducing recycling. These insights are crucial for developing net-zero strategies tailored to each country and achieving net-zero emissions by 2050 for the pulp and paper industry.

Designing a circular carbon and plastics economy for a sustainable future.

The linear production and consumption of plastics today is unsustainable. It creates large amounts of unnecessary and mismanaged waste, pollution and carbon dioxide emissions, undermining global climate targets and the Sustainable Development Goals. This Perspective provides an integrated technological, economic and legal view on how to deliver a circular carbon and plastics economy that minimizes carbon dioxide emissions. Different pathways that maximize recirculation of carbon (dioxide) between plastics waste and feedstocks are outlined, including mechanical, chemical and biological recycling, and those involving the use of biomass and carbon dioxide. Four future scenarios are described, only one of which achieves sufficient greenhouse gas savings in line with global climate targets. Such a bold system change requires 50% reduction in future plastic demand, complete phase-out of fossil-derived plastics, 95% recycling rates of retrievable plastics and use of renewable energy. It is hard to overstate the challenge of achieving this goal. We therefore present a roadmap outlining the scale and timing of the economic and legal interventions that could possibly support this. Assessing the service lifespan and recoverability of plastic products, along with considerations of sufficiency and smart design, can moreover provide design principles to guide future manufacturing, use and disposal of plastics.

Computer-designed repurposing of chemical wastes into drugs.

As the chemical industry continues to produce considerable quantities of waste chemicals1,2, it is essential to devise 'circular chemistry'3-8 schemes to productively back-convert at least a portion of these unwanted materials into useful products. Despite substantial progress in the degradation of some classes of harmful chemicals9, work on 'closing the circle'-transforming waste substrates into valuable products-remains fragmented and focused on well known areas10-15. Comprehensive analyses of which valuable products are synthesizable from diverse chemical wastes are difficult because even small sets of waste substrates can, within few steps, generate millions of putative products, each synthesizable by multiple routes forming densely connected networks. Tracing all such syntheses and selecting those that also meet criteria of process and 'green' chemistries is, arguably, beyond the cognition of human chemists. Here we show how computers equipped with broad synthetic knowledge can help address this challenge. Using the forward-synthesis Allchemy platform16, we generate giant synthetic networks emanating from approximately 200 waste chemicals recycled on commercial scales, retrieve from these networks tens of thousands of routes leading to approximately 300 important drugs and agrochemicals, and algorithmically rank these syntheses according to the accepted metrics of sustainable chemistry17-19. Several of these routes we validate by experiment, including an industrially realistic demonstration on a 'pharmacy on demand' flow-chemistry platform20. Wide adoption of computerized waste-to-valuable algorithms can accelerate productive reuse of chemicals that would otherwise incur storage or disposal costs, or even pose environmental hazards.

Carbon reduction and water saving potentials for growing corrugated boxes for express delivery services in China.

Corrugated packaging for express grew by 90 times to 16.5 Mt y-1 in China, where 81% of recent global express delivery growth occurred. However, the environmental impacts of production, usage, disposal, and recycling of corrugated boxes under the entire supply chain remain unclear. Here, we estimate the magnitudes, drivers, and mitigation potentials of cradle-to-grave life-cycle carbon footprint (CF) and three colors of water footprints (WFs) for corrugated cardboard packaging in China. Over 2007 to 2021, CF, blue and gray WFs per unit package decreased by 45%, 60%, and 84%, respectively, while green WF increased by 23% with growing imports of virgin pulp and China's waste ban. National total CF and WFs were 21 to 102 folded with the scale effects. Only a combination of the supply chain reconstruction, lighter single-piece packaging, and increased recycling rate can possibly reduce the environmental footprints by 24 to 44% by 2035.

Unique acyl chains mark phosphoinositides for recycling.

Two recent complementary studies show that, after phospholipase C cleavage, the characteristic acyl chain composition of phosphoinositide-derived diacylglycerol funnels them back into the PI cycle.

An engineered PET depolymerase to break down and recycle plastic bottles.

Present estimates suggest that of the 359 million tons of plastics produced annually worldwide1, 150-200 million tons accumulate in landfill or in the natural environment2. Poly(ethylene terephthalate) (PET) is the most abundant polyester plastic, with almost 70 million tons manufactured annually worldwide for use in textiles and packaging3. The main recycling process for PET, via thermomechanical means, results in a loss of mechanical properties4. Consequently, de novo synthesis is preferred and PET waste continues to accumulate. With a high ratio of aromatic terephthalate units-which reduce chain mobility-PET is a polyester that is extremely difficult to hydrolyse5. Several PET hydrolase enzymes have been reported, but show limited productivity6,7. Here we describe an improved PET hydrolase that ultimately achieves, over 10 hours, a minimum of 90 per cent PET depolymerization into monomers, with a productivity of 16.7 grams of terephthalate per litre per hour (200 grams per kilogram of PET suspension, with an enzyme concentration of 3 milligrams per gram of PET). This highly efficient, optimized enzyme outperforms all PET hydrolases reported so far, including an enzyme8,9 from the bacterium Ideonella sakaiensis strain 201-F6 (even assisted by a secondary enzyme10) and related improved variants11-14 that have attracted recent interest. We also show that biologically recycled PET exhibiting the same properties as petrochemical PET can be produced from enzymatically depolymerized PET waste, before being processed into bottles, thereby contributing towards the concept of a circular PET economy.

Analysis of Poly(ethylene terephthalate) degradation kinetics of evolved IsPETase variants using a surface crowding model.

Poly(ethylene terephthalate) (PET) is a major plastic polymer utilized in the single-use and textile industries. The discovery of PET-degrading enzymes (PETases) has led to an increased interest in the biological recycling of PET in addition to mechanical recycling. IsPETase from Ideonella sakaiensis is a candidate catalyst, but little is understood about its structure-function relationships with regards to PET degradation. To understand the effects of mutations on IsPETase productivity, we develop a directed evolution assay to identify mutations beneficial to PET film degradation at 30 °C. IsPETase also displays enzyme concentration-dependent inhibition effects, and surface crowding has been proposed as a causal phenomenon. Based on total internal reflectance fluorescence microscopy and adsorption experiments, IsPETase is likely experiencing crowded conditions on PET films. Molecular dynamics simulations of IsPETase variants reveal a decrease in active site flexibility in free enzymes and reduced probability of productive active site formation in substrate-bound enzymes under crowding. Hence, we develop a surface crowding model to analyze the biochemical effects of three hit mutations (T116P, S238N, S290P) that enhanced ambient temperature activity and/or thermostability. We find that T116P decreases susceptibility to crowding, resulting in higher PET degradation product accumulation despite no change in intrinsic catalytic rate. In conclusion, we show that a macromolecular crowding-based biochemical model can be used to analyze the effects of mutations on properties of PETases and that crowding behavior is a major property to be targeted for enzyme engineering for improved PET degradation.

Enzymes' Power for Plastics Degradation.

Plastics are everywhere in our modern way of living, and their production keeps increasing every year, causing major environmental concerns. Nowadays, the end-of-life management involves accumulation in landfills, incineration, and recycling to a lower extent. This ecological threat to the environment is inspiring alternative bio-based solutions for plastic waste treatment and recycling toward a circular economy. Over the past decade, considerable efforts have been made to degrade commodity plastics using biocatalytic approaches. Here, we provide a comprehensive review on the recent advances in enzyme-based biocatalysis and in the design of related biocatalytic processes to recycle or upcycle commodity plastics, including polyesters, polyamides, polyurethanes, and polyolefins. We also discuss scope and limitations, challenges, and opportunities of this field of research. An important message from this review is that polymer-assimilating enzymes are very likely part of the solution to reaching a circular plastic economy.

Functional enzyme-polymer complexes.

SignificanceThe use of biological enzyme catalysts could have huge ramifications for chemical industries. However, these enzymes are often inactive in nonbiological conditions, such as high temperatures, present in industrial settings. Here, we show that the enzyme PETase (polyethylene terephthalate [PET]), with potential application in plastic recycling, is stabilized at elevated temperature through complexation with random copolymers. We demonstrate this through simulations and experiments on different types of substrates. Our simulations also provide strategies for designing more enzymatically active complexes by altering polymer composition and enzyme charge distribution.

Cascade degradation and upcycling of polystyrene waste to high-value chemicals.

Plastic waste represents one of the most urgent environmental challenges facing humankind. Upcycling has been proposed to solve the low profitability and high market sensitivity of known recycling methods. Existing upcycling methods operate under energy-intense conditions and use precious-metal catalysts, but produce low-value oligomers, monomers, and common aromatics. Herein, we report a tandem degradation-upcycling strategy to exploit high-value chemicals from polystyrene (PS) waste with high selectivity. We first degrade PS waste to aromatics using ultraviolet (UV) light and then valorize the intermediate to diphenylmethane. Low-cost AlCl3 catalyzes both the reactions of degradation and upcycling at ambient temperatures under atmospheric pressure. The degraded intermediates can advantageously serve as solvents for processing the solid plastic wastes, forming a self-sustainable circuitry. The low-value-input and high-value-output approach is thus substantially more sustainable and economically viable than conventional thermal processes, which operate at high-temperature, high-pressure conditions and use precious-metal catalysts, but produce low-value oligomers, monomers, and common aromatics. The cascade strategy is resilient to impurities from plastic waste streams and is generalizable to other high-value chemicals (e.g., benzophenone, 1,2-diphenylethane, and 4-phenyl-4-oxo butyric acid). The upcycling to diphenylmethane was tested at 1-kg laboratory scale and attested by industrial-scale techno-economic analysis, demonstrating sustainability and economic viability without government subsidies or tax credits.

Tandem Integration of Biological and Electrochemical Catalysis for Efficient Polyester Upcycling under Ambient Conditions.

Excessive production of waste polyethylene terephthalate (PET) poses an ecological challenge, which necessitates developing technologies to extract the values from end-of-life PET. Upcycling has proven effective in addressing the low profitability of current recycling strategies, yet existing upcycling technologies operate under energy-intensive conditions. Here we report a cascade strategy to steer the transformation of PET waste into glycolate in an overall yield of 92.6% under ambient conditions. The cascade approach involves setting up a robust hydrolase with 95.6% PET depolymerization into ethylene glycol (EG) monomer within 12 h, followed by an electrochemical process initiated by a CO-tolerant Pd/Ni(OH)2 catalyst to convert the EG intermediate into glycolate with high Faradaic efficiency of 97.5%. Techno-economic analysis and life cycle assessment indicate that, compared with the widely adopted electrochemical technology that heavily relies on alkaline pretreatment for PET depolymerization, our designed enzymatic-electrochemical approach offers a cost-effective and low-carbon pathway to upgrade PET.

A novel closed-loop biotechnology for recovery of cobalt from a lithium-ion battery active cathode material.

In recent years, the demand for lithium-ion batteries (LIBs) has been increasing rapidly. Conventional recycling strategies (based on pyro- and hydrometallurgy) are damaging for the environment and more sustainable methods need to be developed. Bioleaching is a promising environmentally friendly approach that uses microorganisms to solubilize metals. However, a bioleaching-based technology has not yet been applied to recover valuable metals from waste LIBs on an industrial scale. A series of experiments was performed to improve metal recovery rates from an active cathode material (LiCoO2; LCO). (i) Direct bioleaching of ≤0.5 % LCO with two prokaryotic acidophilic consortia achieved >80 % Co and 90 % Li extraction. Significantly lower metal recovery rates were obtained at 30 °C than at 45 °C. (ii) In contrast, during direct bioleaching of 3 % LCO with consortia adapted to elevated LCO levels, the 30 °C consortium performed significantly better than the 45 °C consortium, solubilizing 73 and 93 % of the Co and Li, respectively, during one-step bioleaching, and 83 and 99 % of the Co and Li, respectively, during a two-step process. (iii) The adapted 30°C consortium was used for indirect leaching in a low-waste closed-loop system (with 10 % LCO). The process involved generation of sulfuric acid in an acid-generating bioreactor (AGB), 2-3 week leaching of LCO with the biogenic acid (pH 0.9), selective precipitation of Co as hydroxide, and recirculation of the metal-free liquor back into the AGB. In total, 58.2 % Co and 100 % Li were solubilized in seven phases, and >99.9 % of the dissolved Co was recovered after each phase as a high-purity Co hydroxide. Additionally, Co nanoparticles were generated from the obtained Co-rich leachates, using Desulfovibrio alaskensis, and Co electrowinning was optimized as an alternative recovery technique, yielding high recovery rates (91.1 and 73.6% on carbon felt and roughened steel, respectively) from bioleachates that contained significantly lower Co concentrations than industrial hydrometallurgical liquors. The closed-loop system was highly dominated by the mixotrophic archaeon Ferroplasma and sulfur-oxidizing bacteria Acidithiobacillus caldus and Acidithiobacillus thiooxidans. The developed system achieved high metal recovery rates and provided high-purity solid products suitable for a battery supply chain, while minimizing waste production and the inhibitory effects of elevated concentrations of dissolved metals on the leaching prokaryotes. The system is suitable for scale-up applications and has the potential to be adapted to different battery chemistries.

Effect of Pb-exposure and B vitamin deficiencies on δ-aminolevulinic acid dehydratase activity among workers from Pb recycling plants.

Previous studies reported that Pb exposure causes a negative association with delta-aminolevulinic acid dehydratase activity (δ-ALAD), but the impact of Pb exposure (dose and time), B vitamin deficiencies, and lifestyle factors needs to be explored. In this study, the impact of Pb exposure, B vitamin deficiencies, and lifestyle factors on δ-ALAD activity among workers exposed to Pb from the Pb-recycling process was evaluated. Blood lead levels (BLLs), B vitamins (B6, B9, and B12), hematological factors (Hb% and HCT), lifestyle factors, and δ-ALAD activity was assessed in 170 male Pb-exposed workers engaged in the Pb recycling process. BLLs are estimated using the ICP-OES method. B vitamins in serum samples from workers were determined using the ELISA method. The δ-ALAD activity in whole blood samples was determined using the spectrophotometer method. The lifestyle factors were collected using a standard questionnaire. The δ-ALAD activity was significantly decreased in workers with the habits of alcohol use, tobacco consumption, hematocrit < 41%, mild and moderate categories of anemia, vitamin B6 and B12 deficiency, and BLL categories of 10-30, 30-50, and > 50 µg/dL. Multiple regression analysis revealed that the independent variables of alcohol consumption (ß = - 0.170; P = 0.025), BLLs (ß = - 0.589; P = 0.001) and Hb% (ß = 0.183; P = 0.001) significantly influenced the δ-ALAD activity with 44.2% (R2 = 0.442). Among the workers exposed to Pb from the Pb recycling plant, δ-ALAD activity was considerably reduced by Pb exposure, B vitamin deficiency, hematological parameters, and lifestyle factors.

Sustainable strategies towards better utilization of synthetic polymers.

The abstract provides an overview of a study focused on analyzing diverse strategies to achieve sustainable utilization of synthetic polymers through effective waste management. The escalating global consumption of synthetic polymers has precipitated a concerning increase in plastic waste and environmental degradation. To address this challenge, novel materials with specified application goals, such as engineered plastic, have been developed and are intended for recycling and reuse. Despite the reuse and recycling, when plastic gets disposed into the environment, the degradation properties of plastics render a direct disposal hazard, posing a significant environmental threat. To mitigate these issues, the concept of replacing specific monomers of engineered synthetic plastics with bio-alternatives or blending them with other polymers to enhance sustainability and environmental compatibility has emerged. In this study, Acrylonitrile Butadiene Styrene (ABS) plastic is the focal material, and three distinct investigations were conducted. First, replacing ABS plastic's butadiene monomer with natural rubber was explored for its properties and environmental impact. Second, ABS plastic was blended with virgin, recycled, and bio-alternatives of PET (polyethylene terephthalate) and PVC (polyvinyl chloride) polymers. Lastly, recycled ABS blended with recycled PET and PVC was analyzed for mechanical properties. Comparative assessments of these blends were made based on mechanical properties, carbon emissions, and cost-effectiveness. The study determined that the r-ABS/r-PVC (recycled) blend exhibited the most favorable characteristics for practical application.

High-Quality Cellulosic Fibers Engineered from Cotton-Elastane Textile Waste.

Even small amounts of elastane in cotton-elastane blended textiles can prevent fiber-to-fiber recycling strategies in textile recycling. Herein, the selective separation of elastane from cotton blends was addressed by the aminolytic degradation of the synthetic component. Polar aprotic solvents were tested as elastane solvents, but side reactions impeded aminolysis with some of them. Aminolysis of elastane succeeded under mild conditions using dimethyl sulfoxide in combination with diethylenetriamine and 1,5-diazabicyclo[4.3.0]non-5-ene as a cleaving agent and catalyst, respectively. The analysis of the nitrogen content in the recovered cellulose fraction demonstrated that 2 h of reaction at 80 °C reduced the elastane content to values lower than 0.08%. The characterization of the recovered cellulose showed that the applied conditions did not affect the macromolecular properties of cellulose and maintained a cellulose I crystal structure. Degraded elastane products were recovered through precipitation with water. Finally, the cellulosic component was turned into new fibers by dry-jet wet spinning with excellent tensile properties.

Sustainable practices in hospital and operating theaters.

PURPOSE OF REVIEW: This review aims to provide an update on the results of studies published in the last two years involving the development of sustainable practices in hospital and operating theaters (OT). RECENT FINDINGS: Recently, many studies evaluated various initiatives to better understand the environmental impact of the OT but also to minimize its environmental impact. Many trials evidenced the positive impact of the instrument's reuse using an appropriate reprocessing procedure. Better waste segregation is associated with a reduction of produced waste and contributes to a significant reduction in CO 2 equivalent emissions. Regarding anaesthetic gas, Desflurane is known to have the worst environmental impact and the majority of the study evidenced that its reduction permits to drastically reduce greenhouse gas emission of the OT. SUMMARY: Greening the OT necessitates climate-smart actions such as waste reduction, the improvement of reusable instruments, recycling of our waste and better anaesthetic gas management. Within the last two years, many efforts have been made to reduce and better segregate waste produced in the OT and also to better understand the environmental impact of disposable and reusable devices.

Materials Challenges in the Electric Vehicle Transition.

The ongoing transition toward electric vehicles (EVs) is changing materials used for vehicle production, of which the consequences for the environmental performance of EVs are not well understood and managed. We demonstrate that electrification coupled with lightweighting of automobiles will lead to significant changes in the industry's demand not only for battery materials but also for other materials used throughout the entire vehicle. Given the automotive industry's substantial consumption of raw materials, changes in its material demands are expected to trigger volatilities in material prices, consequently impacting the material composition and attractiveness of EVs. In addition, the materials recovered during end-of-life recycling of EVs as the vehicle fleet turns over will impact recycled material supplies both positively and negatively, impacting material availabilities and the economic incentive to engage in recycling. These supply chain impacts will influence material usage and the associated environmental performance of not only the automotive sector but also other metal-heavy industries such as construction. In light of these challenges, we propose the need for new research to understand the dynamic materials impacts of the EV transition that encompasses its implications on EV adoption and fleet life cycle environmental performance. Effectively coordinating the coevolution of material supply chains is crucial for making the sustainable transition to EVs a reality.