Bioavailability testing of a newly developed clindamycin oral suspension in a pediatric porcine model.

Background: Clindamycin's bitter taste and odor is known to affect treatment adherence in children. Recently, a formulation of clindamycin HCl complexed with ion exchange resin IRP 69 was shown to mask the bitter taste. Because of the potential benefit of this formulation for children, a pilot study using a porcine model was conducted to evaluate its relative bioavailability. Methods: A randomized two-way crossover study design using six (n = 6) healthy male piglets 10-12 kg was used to evaluate the absorption profiles and pharmacokinetic parameters of clindamycin from the resinate complex formulation (Test) compared to a commercialized reference suspension. A dose of 15 mg/kg was administered orally by gastric gavage to each piglet followed by repeated blood sampling over 12 h. A wash-out period of 48 h occurred between treatments. Plasma concentration vs. time data was analyzed by non-compartmental analysis. Results: The mean relative bioavailability of clindamycin from the resinate formulation was 78.8%. A two-tailed, paired Student t test yielded a p < 0.05 for AUC∞ and Tmax parameters. A two one-sided test (TOST) suggested a difference in AUC∞ and Cmax for the Test formulation compared to the reference formulation according to the FDA's criteria for bioequivalence. Conclusion: The bioavailability of clindamycin from this novel oral formulation supports continued evaluation of the drug in humans for potential pediatric applications.

Effect of a pharmaceutical cationic exchange resin on the properties of controlled release diphenhydramine hydrochloride matrices using Methocel K4M or Ethocel 7cP as matrix formers.

This work was aimed at evaluating the effect of a pharmaceutical cationic exchange resin (Amberlite IRP-69) on the properties of controlled release matrices using Methocel K4M (HPMC) or Ethocel 7cP (EC) as matrix formers. Diphenhydramine hydrochloride (DPH), which was cationic and water soluble, was chosen as a model drug. HPMC- and EC-based matrices with varying amounts (0-40%w/w) of resin incorporation were prepared by a direct compression. Matrix properties including diameter, thickness, hardness, friability, surface morphology and drug release were evaluated. The obtained matrices were comparable in diameter and thickness regardless of the amount of resin incorporation. Increasing the incorporated resin decreased the hardness of HPMC- and EC-based matrices, correlating with the degree of rupturing on the matrix surfaces. The friability of HPMC-based matrices increased with increasing the incorporated resin, corresponding to their decreased hardness. In contrast, the EC-based matrices showed no significant change in friability in spite of decreasing hardness. The incorporated resin differently influenced DPH release from HPMC- and EC-based matrices in deionized water. The resin further retarded DPH release from HPMC-based matrices due to the gelling property of HPMC and the ion exchange property of the resin. In contrast, the release from EC-based matrices initially increased because of the disintegrating property of the resin, but thereafter declined due to the complex formation between released drug and dispersed resin via the ion exchange process. The release in ionic solutions was also described. In conclusion, the incorporated resin could alter the release and physical properties of matrices.

Ion-exchange fibers and drugs: a transient study.

The objective of this study was to theoretically model and experimentally measure the kinetics and extent of drug release from different ion-exchange materials using an in-house-designed flow-cell. Ion-exchange fibers (staple fibers and fiber cloth) were compared with commercially available ion-exchange materials (resins and gels). The functional ion-exchange groups in all the materials were weak -COOH or strong -SO3H groups. The rate and extent of drug release from the fibers (staple fiber>fiber cloth) was much higher than that from the resin or the gel. An increase in the hydrophilicity of the model drugs resulted in markedly higher rates of drug release from the fibers (nadolol>metoprolol>propranolol>tacrine). Theoretical modelling of the kinetics of ion exchange provided satisfactory explanations for the experimental observations: firstly, a change in the equilibrium constant of the ion-exchange reaction depending on the drug and the ion-exchange material and, secondly, a decrease in the Peclet number (Pe) with decreasing flow-rate of the drug-releasing salt solution.

A study of doxorubicin loading onto and release from sulfopropyl dextran ion-exchange microspheres.

The objective of this study was to investigate various factors that influence doxorubicin (Dox) loading onto and release from sulfopropyl dextran ion-exchange microspheres (MS), and to evaluate the anticancer activity of the released drug in vitro. Dox was incorporated into the MS by incubating the MS with aqueous solutions of Dox at room temperature. The drug release was carried out at 37 degrees C in aqueous solutions containing NaCl with or without CaCl2. The kinetics of drug absorption and release, the amount of Dox released, and the stability of Dox after loading, freeze-drying, and release were determined by spectrophotometry. The cytotoxicity of Dox (the original drug or that released from MS) against murine EMT6 breast cancer cells was assessed using a clonogenic assay. An increase in the MS to drug ratio resulted in a higher absorption rate and a higher fraction of the drug extracted from the solution. The release rate and the equilibrium fraction of Dox released increased with a decrease in the initial amount of Dox loaded or an increase in the salt concentration. The addition of divalent ions (Ca2+) promoted drug release compared to NaCl alone. The percent loss of colony forming ability of the cells, a measure of cytotoxicity of the released Dox, was the same as parent Dox solutions, indicating that the drug bioactivity was fully preserved after the drug loading and release cycle. This work demonstrated that various drug release rates were achieved by varying the drug loading and that the MS-delivered Dox was effective against the cancer cells in vitro.

In-vitro evaluation of ion-exchange microspheres for the sustained release of liposomal-adenoviral conjugates.

This study looks at the development of a novel combination vector consisting of adenovirus conjugated to liposomes (AL complexes) bound to cation-exchanging microspheres (MAL complexes). With adenovirus having a net negative charge and the liposomes a net positive charge it was possible to modify the net charge of the AL complexes by varying the concentrations of adenovirus to liposomes. The modification of the net charge resulted in altered binding and release characteristics. Of the complexes tested, the 5:1 and 2:1 ratio AL complexes were able to be efficiently bound by the microspheres and exhibited sustained release over 24 h. The 1:1 and 1:2 AL complexes, however, bound poorly to the microspheres and were rapidly released. In addition the MAL complexes also were able to reduce the toxicity of the AL complexes, which was seen with the 10:1 ratio. The AL complexes showed considerably more toxicity alone than in combination with microspheres, highlighting a potential benefit of this vector.

Effective therapy of enteric hyperoxaluria: in vitro binding of oxalate by anion-exchange resins and aluminum hydroxide.

Hyperabsorption of dietary oxalate is a major factor in the pathogenesis of enteric hyperoxaluria and a frequent complication of inflammatory bowel disease and ileojejunal bypass surgery. Successful treatment requires reduction in oxalate intake or inhibition of absorption of dietary oxalate by oral ingestion of oxalate binding agents. To identify such agents, oxalate binding by anion-exchange resins, gums, and aluminum hydroxide was measured under conditions that simulated those present in the intestinal lumen. Of the agents tested, those that bound oxalate best were colestipol and aluminum hydroxide. Strongly basic anion-exchange resins readily bound oxalate only in the absence of chloride. These results suggest that colestipol and aluminum hydroxide administration might reduce dietary oxalate absorption in patients with enteric hyperoxaluria.

Intragastric distribution of ion-exchange resins: a drug delivery system for the topical treatment of the gastric mucosa.

Previous studies by this group on freeze-dried oral dosage forms containing finely-divided ion-exchange resins revealed prolonged gastric residence and uniform distribution within the stomach. The present study was carried out to ascertain whether this was due to freeze-drying, properties of the radiolabelled ionic exchange resin, or the small dosing volume used. 99mTc-labelled cholestyramine resin was administered in two dosage forms, a freeze-dried tablet which dissolved in the oral cavity (orally dissolving tablet; ODT) and a 1.5 mL aqueous suspension. Two resin particle sizes (20-40 and 90-125 microns) were studied. Oesophageal transit and intragastric distribution and residence were followed by gamma scintigraphy. In a second study, in six subjects, gastric emptying of the water-soluble fraction of the ODT and 1.5 mL of water, was measured using 99mTc diethylenetriaminepentaacetic acid. Oesophageal transit of a water-soluble marker and resin in suspension was rapid, but the transit of the resin in the ODTs was significantly prolonged. Regardless of particle size or dosage form, the resin was evenly distributed throughout the stomach with 20-25% remaining for 5.5 h. In contrast, the water-soluble marker cleared from the stomach rapidly from both dosage forms. We suggest that oral dose forms containing finely-divided ion-exchange resins may form a useful system for topical treatment of the gastric mucosa, for example in targeting to Helicobacter pylori infection.

Improvement of low bioavailability of a novel factor Xa inhibitor through formulation of cationic additives in its oral dosage form.

A clinical trial of (2S)-2-[4-[[(3S)-1-acetimidoyl-3-pyrrolidinyl]oxy]phenyl]-3-(7-amidino-2-naphtyl) propanoic acid (DX-9065) revealed that its oral bioavailability was only 3% when it was administered as a conventional capsule formulation. The low bioavailability of DX-9065 was likely caused by both its poor membrane permeability and its electrostatic interaction with anionic bile acids. We hypothesized that DX-9065 absorption would be enhanced when the cationic drug was free from the complex through its replacement with other cationic substances. Polystyrene nanospheres coated with cationic poly(vinylamine) and cholestyramine, which is clinically used as a cholesterol-lowering agent, dramatically prevented DX-9065 from interacting with chenodeoxycholic acid in vitro. Successive animal experiments showed that bioavailability of DX-9065 administered with these cationic substances was 2-3 times that of DX-9065 administered solely. A dry syrup formulation with one-half of a minimal cholesterol-lowering equivalent dose of cholestyramine was designed, and the clinical trial was resumed. A 1.3-fold increase in bioavailability of DX-9065 was observed when the dry syrup was administered. We successfully demonstrated that DX-9065 absorption was enhanced when the drug was administered with cationic additives; however, it appeared that the absorption-enhancing function of cholestyramine largely depended on its dose. The dose escalation is probably prerequisite for the significant improvement of DX-9065 absorption in humans.

Development and evaluation of ofloxacin orally disintegrating tablets

Bitter taste of ofloxacin, a broad spectrum bactericidal agent, is masked and orally disintegrating tablets were formulated. The bitter taste is masked by forming complex between drug and weak cation exchange resins, Tulsion 335 and Indion 204. Effect of pH and drug:resin ratio on the drug loading was studied. Maximum drug loading was observed at pH 6. Ratio of 1:2 of drug:resin masked almost complete bitterness of ofloxacin. Formation of complexes was confirmed by IR spectroscopy. Physical characterization of taste masked complexes was carried out. Present work envisages the taste masking of ofloxacin and development of orally disintegrating tablets. The effect of pH and resin quantities on drug loading were studied to find the optimum conditions of drug loading for complete taste masking. Effect of superdisintegrants like sodium starch glycolate, croscarmellose sodium and polyplasdone XL at varying level on physical parameters of compressed tablets was also assessed. The formulations containing 5 % w/w polyplasdone XL showed about 90 % of drug release within 5 minutes. No significant differences were observed in the physical parameters of resinates as well as tablets prepared from Tulsion 335 and Indion 204.

O gosto amargo de ofloxacina, agente bactericida de largo espectro, é mascarado e formularam-se comprimidos dispersíveis. O sabor amargo é mascarado pela formação de complexo entre o fármaco e resinas de troca catiônica fraca, Tulsion 335 e Indion 204. Efeito do pH e da proporção fármaco: resina sobre a carga de fármaco foi estudada. Carga de fármaco máxima foi observada em pH 6. Proporção 1:2 do fármaco: resina mascarou quase completamente o gosto amargo de ofloxacina. A formação de complexos foi confirmada por espectroscopia no IV. Caracterização física dos complexos de sabor mascarado foi realizada. O presente trabalho preconiza o mascaramento do gosto de ofloxacina e desenvolvimento decomprimidos por via oral, se desintegrando. O efeito do pH e da resina quantidades de carga de fármaco foram estudadas paraencontrar as condições óptimas de carga de fármaco para dissimulação do saborcompleto. Efeito da superdisintegrants como amido glicolato de sódio, croscarmelose sódica e Polyplasdone XL em diferentes níveis de parâmetros físicos de comprimidos também avaliados foi avaliada. As formulações contendo 5 %w/w Polyplasdone XL mostraram cerca de 90% de libertação do fármaco no prazo de 5 minutos. Não foram observadas diferenças significativas nos parâmetros físicos de resinatosbem como comprimidos preparados a partir de Tulsion 335 e Indion 204.

Preparation and characterization of a novel pH-sensitive ion exchange resin.

Methylacrylic acid/styrene cross-linked with divinylbenzene is a novel pH-sensitive ion exchange resin. Microspheres of this resin were characterized by Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The microspheres showed a pulsatile swelling behavior when the pH of the media changed. The pH-sensitive microspheres were loaded with salbutamol sulfate and the drug-release characteristics were studied under both simulated gastric and intestinal pH conditions. The results obtained showed that the drug release also depended on the pH of the release media.

Platelet multielemental composition, lability, and subcellular localization.

Diagnostic X-ray spectrometry (DXS), based on X-ray fluorescence, was used to quantitate directly the multiple elemental composition of washed, intact human platelets (n = 16), with the following results: K = 3.08 +/- 1.00 mg/g, Ca = 1.18 +/- 0.29 mg/g, Zn = 35 +/- 9 micrograms/g. These values show that washed platelets contain significant pools of K, Ca, and Zn, the latter some 30-60-fold higher than plasma levels. Dialysis of whole platelets against cation exchange resin (Chelex-100) did not extract Ca(II) and Zn(II) sequestered within whole cells. To identify the subcellular locale of the elements, platelet lysate was subjected to 30-70% sucrose gradient ultracentrifugation and subcellular enriched fractions were obtained. Fractions were analyzed by DXS (for elements), electron microscopy (for dense granules), and subcellular markers fibrinogen and von Willebrand factor. In contrast to Ca and K, which accumulate in the dense granules and the cytoplasm, respectively, Zn appears to be distributed in the alpha-granules (40%) and the cytoplasm (60%). The subcellular distribution of Zn(II) is discussed within the context of the sensitivity of platelet response to the availability of Zn(II) and the platelet release reactions following stimulation.