A comparative experimental investigation of torque capabilities induced by conventional and active, passive self-ligating brackets.

INTRODUCTION: A proper selected bracket-archwire combination displays a determining factor in the efficacy of torque applied to a tooth at the final stages of an orthodontic treatment. The objective of the current study was to assess the torque capabilities of various bracket systems combined with diverse archwire materials and cross-sections. METHODS: The study comprised of four different 0.018-inch slot orthodontic brackets: the passive and the active self-ligating 1. Swiss Nonligating Bracket (SNB) and 2. SPEED and the metallic and the plastic conventional ligating 3. Mini Mono and 4. Brilliant, respectively, and four different archwire types: stainless steel and Nitinol: 0.016×0.016 inch and 0.016×0.022 inch. A 20 degrees labial crown torque (+20 degrees) and then a 20 degrees palatal crown torque (-20 degrees) were applied gradually on the upper right central incisor. Maximum torquing moments and torque play were registered. RESULTS: Highest torquing moments were expressed by combining SPEED® with 0.016×0.022 inch stainless steel archwire. Lowest moments, but highest torque loss were registered by inserting a 0.016×0.016 inch Nitinol archwire in conventional ligating brackets. CONCLUSIONS: Active self-ligating system manifests the best torque effectiveness. An evident dependence of the torque expression is displayed both on the type of ligation and on the material of the archwire.