Effects of Cold Rolling Reduction Rate on the Microstructure and Properties of Cu-1.16Ni-0.36Cr Alloy after Thermo-Mechanical Treatment.
Materials (Basel)
; 16(19)2023 Sep 30.
Article
em En
| MEDLINE
| ID: mdl-37834645
ABSTRACT
In this paper, a Cu-Ni-Cr alloy was prepared by adding a Ni-Cr intermediate alloy to copper. The effects of the cold rolling reduction rate on the microstructure and properties of the Cu-1.16Ni-0.36Cr alloy after thermo-mechanical treatment were studied. The results show that the tensile strength of the alloy increased while the electrical conductivity slightly decreased with an increase of the cold rolling reduction rate. At a rolling strain of 3.2, the tensile strength was 512.0 MPa and the conductivity was 45.5% IACS. At a rolling strain of 4.3, the strength further increased to 536.1 MPa and the conductivity decreased to 41.9% IACS. The grain size and dislocation density decreased with an increase of the reduction rate in the thermo-mechanical treatment. However, when the rolling strain reached 4.3, the recrystallization degree of the alloy increased due to an accumulation of the dislocation density and deformation energy, resulting in a slight increase in the grain size and a decrease in the dislocation density. The texture strength of the brass increased due to the induced shear band, with an increase of the cold rolling reduction rate. The reduction rate promoted a uniform distribution of nano-scale Cr precipitates and further enhanced the strength via precipitation strengthening.
Texto completo:
1
Coleções:
01-internacional
Base de dados:
MEDLINE
Idioma:
En
Revista:
Materials (Basel)
Ano de publicação:
2023
Tipo de documento:
Article
País de afiliação:
China