Polyelectrolyte-multivalent molecule complexes: physicochemical properties and applications.

The complexation of polyelectrolytes with other oppositely charged structures gives rise to a great variety of functional materials with potential applications in a wide spectrum of technological fields. Depending on the assembly conditions, polyelectrolyte complexes can acquire different macroscopic configurations such as dense precipitates, nanosized colloids and liquid coacervates. In the past 50 years, much progress has been achieved to understand the principles behind the phase separation induced by the interaction of two oppositely charged polyelectrolytes in aqueous solutions, especially for symmetric systems (systems in which both polyions have similar molecular weight and concentration). However, in recent years, the complexation of polyelectrolytes with alternative building blocks such as small charged molecules (multivalent inorganic species, oligopeptides, and oligoamines, among others) has gained attention in different areas. In this review, we discuss the physicochemical characteristics of the complexes formed by polyelectrolytes and multivalent small molecules, putting a special emphasis on their similarities with the well-known polycation-polyanion complexes. In addition, we analyze the potential of these complexes to act as versatile functional platforms in various technological fields, such as biomedicine and advanced materials engineering.

A novel tricationic fullerene C60 as broad-spectrum antimicrobial photosensitizer: mechanisms of action and potentiation with potassium iodide.

A novel amphiphilic photosensitizing agent based on a tricationic fullerene C60 (DMC603+) was efficiently synthesized from its non-charged analogue MMC60. These fullerenes presented strong UV absorptions, with a broad range of less intense absorption up to 710 nm. Both compounds showed low fluorescence emission and were able to photosensitize the production of reactive oxygen species. Furthermore, photodecomposition of L-tryptophan sensitized by both fullerenes indicated an involvement of type II pathway. DMC603+ was an effective agent to produce the photodynamic inactivation (PDI) of Staphylococcus aureus, Escherichia coli and Candida albicans. Mechanistic insight indicated that the photodynamic action sensitized by DMC603+ was mainly mediated by both photoprocesses in bacteria, while a greater preponderance of the type II pathway was found in C. albicans. In presence of potassium iodide, a potentiation of PDI was observed due to the formation of reactive iodine species. Therefore, the amphiphilic DMC603+ can be used as an effective potential broad-spectrum antimicrobial photosensitizer.

Insulin Delivery from Glucose-Responsive, Self-Assembled, Polyamine Nanoparticles: Smart "Sense-and-Treat" Nanocarriers Made Easy.

Polyamine-salt aggregates (PSA) are biomimetic soft materials that have attracted great attention due to their straightforward fabrication methods, high drug-loading efficiencies, and attractive properties for pH-triggered release. Herein, a simple and fast multicomponent self-assembly process was used to construct cross-linked poly(allylamine hydrochloride)/phosphate PSAs (hydrodynamic diameter of 360 nm) containing glucose oxidase enzyme, as a glucose-responsive element, and human recombinant insulin, as a therapeutic agent for the treatment of diabetes mellitus (GI-PSA). The addition of increasing glucose concentrations promotes the release of insulin due to the disassembly of the GI-PSAs triggered by the catalytic in situ formation of gluconic acid. Under normoglycemia, the GI-PSA integrity remained intact for at least 24 h, whereas hyperglycemic conditions resulted in 100 % cargo release after 4 h of glucose addition. This entirely supramolecular strategy presents great potential for the construction of smart glucose-responsive delivery nanocarriers.

Diketopyrrolopyrrole-fullerene C60 architectures as highly efficient heavy atom-free photosensitizers: synthesis, photophysical properties and photodynamic activity.

Chromophore-fullerene C60 hybrids possess interesting properties that enable them to act as heavy atom-free photosensitizers and reactive oxygen species (ROS) producers. Here, two new diketopyrrolopyrrole-C60 conjugates were efficiently synthesized and characterized. The conjugates show broadband absorption in the visible spectral region, in which diketopyrrolopyrrole dyes act as light-harvesting antenna with very high capacity to populate excited triplet states. Furthermore, the ability of diketopyrrolopyrrole-C60 systems to generate singlet molecular oxygen was explored for the first time in solvents of different polarities. The experimental results show that these architectures exhibit very high production rates of this ROS. In addition, a preliminary study on Staphylococcus aureus cell suspensions indicates that both conjugates exhibit phototoxicity after irradiation with green LED light. Thus, the data obtained provide evidence that these diketopyrrolopyrrole-C60 architectures act as potential heavy atom-free photosensitizers in photodynamic inactivation of microorganisms and other singlet oxygen-mediated applications.

Redox-active polyamine-salt aggregates as multistimuli-responsive soft nanoparticles.

Polyamine-salt aggregates have become promising soft materials in nanotechnology due to their easy preparation process and pH-responsiveness. Here, we report the use of hexacyanoferrate(ii) and hexacyanoferrate(iii) as electroactive crosslinking agents for the formation of nanometer-sized redox-active polyamine-redox-salt aggregates (rPSA) in bulk suspension. This nanoplatform can be selectively assembled or disassembled under different stimuli such as redox environment, pH and ionic strength. By changing the charge of the building blocks, external triggers allow switching the system between two phase states: aggregate-free solution or colloidal rPSA dispersion. The stimuli-activated modulation of the assembly/disassembly processes opens a path to exploit rPSA in technologies based on smart nanomaterials.

Light-Harvesting Antenna and Proton-Activated Photodynamic Effect of a Novel BODIPY-Fullerene C60 Dyad as Potential Antimicrobial Agent.

A covalently linked BODIPY-fullerene C60 dyad (BDP-C60 ) was synthesized as a two-segment structure, which consists of a visible light-harvesting antenna attached to an energy or electron acceptor moiety. This structure was designed to improve the photodynamic action of fullerene C60 to inactivate bacteria. The absorption spectrum of BDP-C60 was found to be a superposition of the spectra of its constitutional moieties, whereas the fluorescence emission of the BODIPY unit was strongly quenched by the fullerene C60 . Spectroscopic, calculations, and redox studies indicate a competence between photoinduced energy and electron transfer. Protonating the dimethylaminophenyl substituent through addition of an acidic medium led to a substantial increase in the fluorescence emission, triplet excited state formation, and singlet molecular oxygen production. At physiological pH, photosensitized inactivation of Staphylococcus aureus mediated by 1 µM BDP-C60 exhibited a 4.5 log decrease of cell survival (>99.997 %) after 15 min irradiation. A similar result was obtained with Escherichia coli using 30 min irradiation. Moreover, proton-activated photodynamic action of BDP-C60 turned this dyad into a highly effective photosensitizer to eradicate E. coli. Therefore, BDP-C60 is an interesting photosensitizing structure in which the light-harvesting antenna effect of the BODIPY unit combined with the protonation of dimethylaminophenyl group can be used to improve the photoinactivation of bacteria.

Polyamine Colloids Cross-Linked with Phosphate Ions: Towards Understanding the Solution Phase Behavior.

Ionically crosslinked poly(allylamine)/phosphate (PAH/Pi) colloids consist of self-assembled nanostructures stabilized by supramolecular interactions. Under physiological conditions, these interactions should be present at high ionic strength and only in a narrow pH window to be effective as drug delivery agents. In this work we study the effect of the pH and ionic strength in the chemical behaviour of inorganic phosphate (Pi), poly(allylamine hydrochloride) (PAH) and their mixture in aqueous solution (PAH-Pi). By combination of experimental measurements and a theoretical model, we demonstrate that the driving force that leads to the formation of colloids is the electrostatic pairing between the positively charged amino groups in PAH and negatively charged HPO42- ions. Increasing the ionic strength of the system by addition of KCl weakens the PAH-Pi interactions and narrows the pH stability window from 4 to 1.8 pH units. In addition, a fully reversible system was obtained in which the colloids assemble and disassemble by changing the pH between 6.8 and 7.1 at high ionic strength, making them suitable for use as pH-responsive nanocarriers.

Continuous assembly of supramolecular polyamine-phosphate networks on surfaces: preparation and permeability properties of nanofilms.

Supramolecular self-assembly of molecular building blocks represents a powerful "nanoarchitectonic" tool to create new functional materials with molecular-level feature control. Here, we propose a simple method to create tunable phosphate/polyamine-based films on surfaces by successive assembly of poly(allylamine hydrochloride) (PAH)/phosphate anions (Pi) supramolecular networks. The growth of the films showed a great linearity and regularity with the number of steps. The coating thickness can be easily modulated by the bulk concentration of PAH and the deposition cycles. The PAH/Pi networks showed chemical stability between pH 4 and 10. The transport properties of the surface assemblies formed from different deposition cycles were evaluated electrochemically by using different redox probes in aqueous solution. The results revealed that either highly permeable films or efficient anion transport selectivity can be created by simply varying the concentration of PAH. This experimental evidence indicates that this new strategy of supramolecular self-assembly can be useful for the rational construction of single polyelectrolyte nanoarchitectures with multiple functionalities.

Photodynamic inactivation of microorganisms sensitized by cationic BODIPY derivatives potentiated by potassium iodide.

The photodynamic inactivation mediated by 1,3,5,7-tetramethyl-8-[4-(N,N,N-trimethylamino)phenyl]-4,4-difluoro-4-bora-3a,4a-diaza-s-indacene 3 and 8-[4-(3-(N,N,N-trimethylamino)propoxy)phenyl]-4,4-difluoro-4-bora-3a,4a-diaza-s-indacene 4 was investigated on Staphylococcus aureus, Escherichia coli and Candida albicans. In vitro experiments indicated that BODIPYs 3 and 4 were rapidly bound to microbial cells at short incubation periods. Also, fluorescence microscopy images showed green emission of BODIPYs bound to microbial cells. Photosensitized inactivation improved with an increase of the irradiation time. Similar photoinactivation activities were found for both BODIPYs in bacteria. The photoinactivation induced by these BODIPYs was effective for both bacteria. However, the Gram-positive bacterium was inactivated sooner and with a lower concentration of a photosensitizer than the Gram-negative bacterium. After 15 min irradiation, the complete eradication of S. aureus was obtained with 1 µM photosensitizer. A reduction of 4.5 log in the E. coli viability was found when using 5 µM photosensitizer and 30 min irradiation. Also, the last conditions produced a decrease of 4.5 log in C. albicans cells treated with BODIPY 3, while 4 was poorly effective. On the other hand, the effect of the addition of KI on photoinactivation at different irradiation periods and salt concentrations was investigated. A smaller effect was observed in S. aureus because the photosensitizers alone were already very effective. In E. coli, photokilling potentiation was mainly found at longer irradiation periods. Moreover, the photoinactivation of C. albicans mediated by these BODIPYs was increased in the presence of KI. In solution, an increase in the formation of the BODIPY triplet states was observed with the addition of the salt, due to the effect of external heavy atoms. The greater intersystem crossing together with the formation of reactive iodine species induced by BODIPYs may be contributing to enhance the inactivation of microorganisms. Therefore, these BODIPYs represent interesting photosensitizers to inactivate microorganisms. In particular, BODIPY 3 in combination with KI was highly effective as a broad spectrum antimicrobial photosensitizer.

Approaches to unravel pathways of reactive oxygen species in the photoinactivation of bacteria induced by a dicationic fulleropyrrolidinium derivative.

The photodynamic mechanism sensitized by N,N-dimethyl-2-[4-(3-N,N,N-trimethylammoniopropoxy)phenyl]fulleropyrrolidinium (DPC602+) was investigated in Staphylococcus aureus cells. Different experimental conditions were used to detect reactive oxygen species (ROS) in S. aureus cell suspensions. First, a photoinactivation of 4 log decrease of S. aureus viability was chosen using 0.5µM DPC602+ and 15min irradiation. An anoxic atmosphere indicated that oxygen was required for an effective photoinactivation. Also, photoprotection was found in the presence of sodium azide, whereas the photocytotoxicity induced by DPC602+ increased in D2O. The addition of diazabicyclo[2.2.2]octane or d-mannitol produced a reduction in the S. aureus photokilling. Moreover, singlet molecular oxygen, O2(1Δg), was detected by the reaction with 9,10-dimethylanthracene into the S. aureus cells. A decrease in the photoinactivation of S. aureus was observed in the presence of ß-nicotinamide adenine dinucleotide reduced form, which was dependent on the NADH concentration. Therefore, under aerobic condition the photocytotoxicity activity induced by DPC602+ was mediated by mainly a contribution of type II process. Moreover, photoinactivation of S. aureus was possible with DPC602+ in the presence of azide anions under anoxic condition. However, these conditions were not effective to photoinactivate Escherichia coli. On the other hand, the addition of potassium iodide produced an increase in the photokilling of bacteria, depending on the KI concentration and irradiation times. The formation of reactive iodine species may be contributing to inactivate S. aureus cells photoinduced by DPC602+.

Self-assembled peptide dendrigraft supraparticles with potential application in pH/enzyme-triggered multistage drug release.

Multistage delivery systems with size reduction capacity have been proposed as a powerful strategy for improving tissue drug penetration. Here we developed a simple and fast supramolecular approach to construct size-shrinkable polyamine-salt aggregates by ionic cross-linking of biodegradable poly-L-lysine dendrigraft with tripolyphosphate anion. The use of a peptide dendrimer as a nanobuilding block (∼7 nm in diameter) allows the formation of supraparticles (SPs) with well-defined dimensions (∼200 nm in diameter), narrow size distribution and great capacity to encapsulate different molecules, including chemotherapeutic agents as Curcumin and Doxorubicin. When exposed to slightly acidic environments, the crosslinked matrix is instantaneously disassembled to free dendrimer units. Subsequently, model cargo molecules entrapped in the dendrimer architecture can be released by the action of trypsin enzyme through peptide biodegradation. Therefore, these SPs with proved sequential pH and enzyme-responsiveness could be exploited as nanocarriers in multistage drug delivery systems.

Phenotypic Resistance in Photodynamic Inactivation Unravelled at the Single Bacterium Level.

Herein we report a simple fluorescence microscopy methodology that, jointly with four photosensitizers (PSs) and a cell viability marker, allows monitoring of phenotypic bacterial resistance to photodynamic inactivation (PDI) treatments. The PSs, composed of BODIPY dyes, were selected according to their ability to interact with the cell wall and the photoinactivating mechanism involved (type I or type II). In a first approach, the phenotypic heterogeneity allowing bacteria to persist during PDI treatment was evaluated in methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli as Gram-positive and Gram-negative models, respectively. By means of propidium iodide (PI), we monitored with spatiotemporal resolution cell viability at the single bacterium level. All the PSs were effective at inactivating pathogens; however, the cationic nonhalogenated PS (compound 1) surpassed the others and was capable of photoinactivating E. coli even under optimal growth conditions. Compound 1 was further tested on two other Gram-negative strains, Pseudomonas aeruginosa and Klebsiella pneumoniae, with outstanding results. All bacterial strains used here are well-known ESKAPE pathogens, which are the leading cause of nosocomial infections worldwide. Thorough data analysis of individual cell survival times revealed clear phenotypic variation expressed in the cell wall that affected PI permeation and thus its intercalation with DNA. For the same bacterial sample, death times may vary from seconds to hours. In addition, the PI incorporation time is also a parameter governed by the phenotypic characteristics of the microbes. Finally, we demonstrate that the results gathered for the bacteria provide direct and unique experimental evidence that supports the time-kill curve profiles.

Multitasking polyamine/ferrioxalate nano-sized assemblies: thermo-, photo-, and redox-responsive soft materials made easy.

Responsive nanomaterials have emerged as key components in materials sciences. Herein, we report the one-step preparation of multi-stimuli responsive polyamine-salt aggregates (PSA) by ionically crosslinking polyethylenimine with potassium ferrioxalate (FeOx). The unique properties of FeOx enables a novel class of soft nanomaterial that disassembles by exposure to light, reducing environments and temperature.

Synthesis, spectroscopic properties and photodynamic activity of two cationic BODIPY derivatives with application in the photoinactivation of microorganisms.

Two cationic BODIPYs 3 and 4 were synthesized by acid-catalyzed condensation of the corresponding pyrrole and benzaldehyde, followed by complexation with boron and methylation. Compound 3 contains methyl at the 1,3,5 and 7 positions of the s-indacene ring and a N,N,N-trimethylamino group attached to the phenylene unit, while 4 is not substituted by methyl groups and the cationic group is bound by an aliphatic spacer. UV-visible absorption spectra of these BODIPYs show an intense band at ∼500 nm in solvents of different polarities and n-heptane/sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/water reverse micelles. Compound 3 exhibits a higher fluorescence quantum yield (ΦF = 0.29) than 4 (ΦF = 0.030) in N,N-dimethylformamide (DMF) due to sterically hindered rotation of the phenylene ring. BODIPYs 3 and 4 induce photosensitized oxidation of 1,3-diphenylisobenzofuran (DPBF) with yields of singlet molecular oxygen of 0.07 and 0.03, respectively. However, the photodynamic activity increases in a microheterogenic medium formed by AOT micelles. Also, both BODIPYs sensitize the photodecomposition of l-tryptophan (Trp). In presence of diazabicyclo[2.2.2]octane (DABCO) or D-mannitol, a reduction in the photooxidation of Trp was found, indicating a contribution of type I photoprocess. Moreover, the addition of KI produces fluorescence quenching of BODIPYs and reduces the photooxidation of DPBF. In contrast, this inorganic salt increases the photoinduced decomposition of Trp, possibly due to the formation of reactive iodine species. The effect of KI was also observed in the potentiation of the photoinactivation of microorganisms. Therefore, the presence of KI could increase the decomposition of biomolecules induced by these BODIPYs in a biological media, leading to a higher cell photoinactivation.