Glyphosate detection by means of a voltammetric electronic tongue and discrimination of potential interferents.

A new electronic tongue to monitor the presence of glyphosate (a non-selective systemic herbicide) has been developed. It is based on pulse voltammetry and consists in an array of three working electrodes (Pt, Co and Cu) encapsulated on a methacrylate cylinder. The electrochemical response of the sensing array was characteristic of the presence of glyphosate in buffered water (phosphate buffer 0.1 mol · dm-3, pH 6.7). Rotating disc electrode (RDE) studies were carried out with Pt, Co and Cu electrodes in water at room temperature and at pH 6.7 using 0.1 mol · dm-3 of phosphate as a buffer. In the presence of glyphosate, the corrosion current of the Cu and Co electrodes increased significantly, probably due to the formation of Cu2+ or Co2+ complexes. The pulse array waveform for the voltammetric tongue was designed by taking into account some of the redox processes observed in the electrochemical studies. The PCA statistical analysis required four dimensions to explain 95% of variance. Moreover, a two-dimensional representation of the two principal components differentiated the water mixtures containing glyphosate. Furthermore, the PLS statistical analyses allowed the creation of a model to correlate the electrochemical response of the electrodes with glyphosate concentrations, even in the presence of potential interferents such as humic acids and Ca2+. The system offers a PLS prediction model for glyphosate detection with values of 098, -2.3 × 10-5 and 0.94 for the slope, the intercept and the regression coefficient, respectively, which is in agreement with the good fit between the predicted and measured concentrations. The results suggest the feasibility of this system to help develop electronic tongues for glyphosate detection.

New bladder cancer non-invasive surveillance method based on voltammetric electronic tongue measurement of urine.

Bladder cancer (BC) is the sixth leading cause of death by cancer. Depending on the invasiveness of tumors, patients with BC will undergo surgery and surveillance lifelong, owing the high rate of recurrence and progression. In this context, the development of strategies to support non-invasive BC diagnosis is focusing attention. Voltammetric electronic tongue (VET) has been demonstrated to be of use in the analysis of biofluids. Here, we present the implementation of a VET to study 207 urines to discriminate BC and non-BC for diagnosis and surveillance to detect recurrences. Special attention has been paid to the experimental setup to improve reproducibility in the measurements. PLSDA analysis together with variable selection provided a model with high sensitivity, specificity, and area under the ROC curve AUC (0.844, 0.882, and 0.917, respectively). These results pave the way for the development of non-invasive low-cost and easy-to-use strategies to support BC diagnosis and follow-up.

Electro-responsive films containing voltage responsive gated mesoporous silica nanoparticles grafted onto PEDOT-based conducting polymer.

The characteristics and electromechanical properties of conductive polymers together to their biocompatibility have boosted their application as a suitable tool in regenerative medicine and tissue engineering. However, conducting polymers as drug release materials are far from being ideal. A possibility to overcome this drawback is to combine conducting polymers with on-command delivery particles with inherent high-loading capacity. In this scenario, we report here the preparation of conduction polymers containing gated mesoporous silica nanoparticles (MSN) loaded with a cargo that is delivered on command by electro-chemical stimuli increasing the potential use of conducting polymers as controlled delivery systems. MSNs are loaded with Rhodamine B (Rh B), anchored to the conductive polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with poly[(4-styrenesulfonic acid)-co-(maleic acid)], functionalized with a bipyridinium derivative and pores are capped with heparin (P3) by electrostatic interactions. P3 releases the entrapped cargo after the application of -640 mV voltage versus the saturated calomel electrode (SCE). Pore opening in the nanoparticles and dye delivery is ascribed to both (i) the reduction of the grafted bipyridinium derivative and (ii) the polarization of the conducting polymer electrode to negative potentials that induce detachment of positively charged heparin from the surface of the nanoparticles. Biocompatibility and cargo release studies were carried out in HeLa cells cultures.

Influence of potential pulses amplitude sequence in a voltammetric electronic tongue (VET) applied to assess antioxidant capacity in aliso.

Four signals configurations were studied, two of them built by small increases of potential and two with bigger increments. The highest current values were obtained when pulses with bigger change of potential were used although the best results were shown by the pulse sequence which included an intermediate pulse before the relevant pulse. A mathematical model based on trolox pattern was developed to predict antioxidant capacity of aliso, employing information obtained from all the electrodes, although model validation could be done only employing the information from gold electrode.

Assessing heat treatment of chicken breast cuts by impedance spectroscopy.

The aim of this work was to develop a new system based on impedance spectroscopy to assess the heat treatment of previously cooked chicken meat by two experiments; in the first, samples were cooked at different temperatures (from 60 to 90 ℃) until core temperature of the meat reached the water bath temperature. In the second approach, temperature was 80 ℃ and the samples were cooked for different times (from 5 to 55 min). Impedance was measured once samples had cooled. The examined processing parameters were the maximum temperature reached in thermal centre of the samples, weight loss, moisture and the integral of the temperature profile during the cooking-cooling process. The correlation between the processing parameters and impedance was studied by partial least square regressions. The models were able to predict the studied parameters. Our results are essential for developing a new system to control the technological, sensory and safety aspects of cooked meat products on the whole meat processing line.

Innovative nondestructive measurements of water activity and the content of salts in low-salt hake minces.

Impedance spectroscopy (IS), low-field proton nuclear magnetic resonance (LF (1)H NMR), chloride titration, ion chromatography, and an ion selective electrode were used to investigate the physicochemical parameters and measure sodium and potassium contents in low-salt brines and fish. Salt solutions (0-3 w/w, %) and model products of minced hake with added NaCl (0.5-3.0 w/w, %), or a mixture of NaCl and KCl (50/50 w/w, %), were analyzed. Good correlation was observed between the sodium content determined by using the ion selective electrode method and ion chromatography (R(2) = 0.97). In both salt solutions and fish minces, the impedance spectroscopy measurements could detect the difference in salt contents in mince with salt contents down to 0.5%. The NMR transversal relaxation time T2 measurements clearly distinguished samples with 0, 0.5, and 1.0-3.0% salt, based on principal component analysis (PCA). Therefore, LF (1)H NMR seems to be a suitable technique for studies of low-salt products.

Classification of unaltered and altered dry-cured ham by impedance spectroscopy: a preliminary study.

The aims of this work were characterized by the physicochemical and microbiological features of dried-cured hams classified by the manufacturer as altered (deep spoilage and swollen) and unaltered, as well as, correlated these results with the electronic measurements of impedance spectroscopy, in order to lay the groundwork to design a suitable electrode to be used for checking in line all dry-cured ham elaborated. Double electrode and coaxial needle electrode were used in a frequency range of 100Hz to 1MHz. The electronic measurements of the two electrodes were able undoubtedly to discriminate between altered and unaltered dry-cured hams; moreover a tendency to classify between deep spoilage and swollen hams was shown. The values into the range of frequencies between 100Hz-1000Hz, for both electrodes, showed the best clustering results. More studies are needed to select the best electrode which can be transformed in a robust and versatile electrode which could be used for checking in line all dry-cured ham elaborated.

Quantification of organic acids using voltammetric tongues.

Recently, electronic tongues (ET) have appeared as an excellent alternative to traditional techniques for the evaluation of food quality and processes. ET systems are based on arrays of low selectivity sensors that are simultaneously sensitive to several components in a measured sample (cross-sensitivity). The aim of this study was to determine the ability of an ET based on pulse voltammetry to quantify organic acids (ascorbic, citric and malic acids) in simple (SS) and binary solutions (BS) using different electrodes. The most significant electrodes for ascorbic acid prediction were Ni and Ag for SS, and Ag and Ir for BS where positive pulses were more suitable than negative ones. The prediction of citric and malic acids in SS and BS were suitable using Ir, Rh, Pt, Ag and Cu electrodes, using both positive and negative pulses.

A voltammetric electronic tongue as tool for water quality monitoring in wastewater treatment plants.

The use of a voltammetric electronic tongue as tool for the prediction of concentration levels of certain water quality parameters from influent and effluent wastewater from a Submerged Anaerobic Membrane Bioreactor pilot plant applied to domestic wastewater treatment is proposed here. The electronic tongue consists of a set of noble (Au, Pt, Rh, Ir, and Ag) and non-noble (Ni, Co and Cu) electrodes that were housed inside a stainless steel cylinder which was used as the body of the electronic tongue system. As a previous step an electrochemical study of the response of the ions sulphate, orthophosphate, acetate, bicarbonate and ammonium was carried out in water using the electrodes contained in the electronic tongue. The second part of the work was devoted to the application of the electronic tongue to the characterization of the influent and effluent waters from the wastewater treatment plant. Partial Least Squares analysis was used to obtain a correlation between the data from the tongue and the pollution parameters measured in the laboratory such as soluble chemical oxygen demand (CODs), soluble biological oxygen demand (BODs), ammonia (NH(4)-N), orthophosphate (PO(4)-P), Sulphate (SO(4)-S), acetic acid (HAC) and alkalinity (Alk). A total of 28 and 11 samples were used in the training and the validation steps, respectively, for both influent and effluent water samples. The electronic tongue showed relatively good predictive power for the determination of BOD, COD, NH(4)-N, PO(4)-P, SO(4)-S, and Alk.