Synthesis of 6,8-diaminopurines via acid-induced cascade cyclization of 5-aminoimidazole precursors and preliminary anticancer evaluation.

Inspired by the pharmacological interest generated by 6-substituted purine roscovitine for cancer treatment, 5-aminoimidazole-4-carboxamidine precursors containing a cyanamide unit were prepared by condensation of 5-amino-N-cyanoimidazole-4-carbimidoyl cyanides with a wide range of primary amines. When these amidine precursors were combined with acids, a fast cascade cyclization occurred at room temperature, affording new 6,8-diaminopurines with the N-3 and N-6 substituents changed relatively to the original positions they occupied in the amidine and imidazole moieties of precursors. The efficacy and wide scope of this method was well demonstrated by an easy and affordable synthesis of 22 6,8-diaminopurines decorated with a wide diversity of substituents at the N-3 and N-6 positions of the purine ring. Preliminary in silico and in vitro assessments of these 22 compounds were carried out and the results showed that 13 of these tested compounds not only exhibited IC50 values between 1.4 and 7.5 µM against the colorectal cancer cell line HCT116 but also showed better binding energies than known inhibitors in docking studies with different cancer-related target proteins. In addition, good harmonization observed between in silico and in vitro results strengthens and validates this preliminary evaluation, suggesting that these novel entities are good candidates for further studies as new anticancer agents.

Multifunctional Lanthanide-Based Metal-Organic Frameworks Derived from 3-Amino-4-hydroxybenzoate: Single-Molecule Magnet Behavior, Luminescent Properties for Thermometry, and CO2 Adsorptive Capacity.

Herein, we describe and study a new family of isostructural multifunctional metal-organic frameworks (MOFs) with the formula {[Ln5L6(OH)3(DMF)3]·5H2O}n (where (H2L) is 3-amino-4-hydroxybenzoic acid ligand) for magnetism and photoluminescence. Interestingly, three of the materials (Dy-, Er-, and Yb-based MOFs) present single-molecule magnet (SMM) behavior derived from the magnetic anisotropy of the lanthanide ions as a consequence of the adequate electronic distribution of the coordination environment. Additionally, photoluminescence properties of the ligand in combination with Eu and Tb counterparts were studied, including the heterometallic Eu-Tb mixed MOF that shows potential as ratiometric luminescent thermometers. Finally, the porous nature of the framework allowed showing the CO2 sorption capacity.

Extensive characterization of choline chloride and its solid-liquid equilibrium with water.

The importance of choline chloride (ChCl) is recognized due to its widespread use in the formulation of deep eutectic solvents. The controlled addition of water in deep eutectic solvents has been proposed to overcome some of the major drawbacks of these solvents, namely their high hygroscopicities and viscosities. Recently, aqueous solutions of ChCl at specific mole ratios have been presented as a novel, low viscous deep eutectic solvent. Nevertheless, these proposals are suggested without any information about the solid-liquid phase diagram of this system or the deviations from the thermodynamic ideality of its precursors. This work contributes significantly to this matter as the phase behavior of pure ChCl and (ChCl + H2O) binary mixtures was investigated by calorimetric and analytical techniques. The thermal behavior and stability of ChCl were studied by polarized light optical microscopy and differential scanning calorimetry, confirming the existence of a solid-solid transition at 352.2 ± 0.6 K. Additionally, heat capacity measurements of pure ChCl (covering both ChCl solid phases) and aqueous solutions of ChCl (xChCl < 0.4) were performed using a heat-flow differential scanning microcalorimeter or a high-precision heat capacity drop calorimeter, allowing the estimation of a heat capacity change of (ChCl) ≈ 39.3 ± 10 J K-1 mol-1, between the hypothetical liquid and the observed crystalline phase at 298.15 K. The solid-liquid phase diagram of the ChCl + water mixture was investigated in the whole concentration range by differential scanning calorimetry and the analytical shake-flask method. The phase diagram obtained for the mixture shows an eutectic temperature of 204 K, at a mole fraction of choline chloride close to xChCl = 0.2, and a shift of the solid-solid transition of ChCl-water mixtures of 10 K below the value observed for pure choline chloride, suggesting the appearance of a new crystalline structure of ChCl in the presence of water, as confirmed by X-ray diffraction. The liquid phase presents significant negative deviations to ideality for water while COSMO-RS predicts a near ideal behaviour for ChCl.

Adsorptive Capacity, Inhibitory Activity and Processing Techniques for a Copper-MOF Based on the 3,4-Dihydroxybenzoate Ligand.

Due to the fast, emerging development of antibiotic-resistant bacteria, the need for novel, efficient routes to battle these pathogens is crucial; in this scenario, metal-organic frameworks (MOFs) are promising materials for combating them effectively. Herein, a novel Cu-MOF-namely 1-that displays the formula [Cu3L2(DMF)2]n (DMF = N,N-dimethylformamide) is described, synthesized by the combination of copper(II) and 3,4-dihydroxybenzoic acid (H3L)-both having well-known antibacterial properties. The resulting three-dimensional structure motivated us to study the antibacterial activity, adsorptive capacity and processability of the MOF in the form of pellets and membranes as a proof-of-concept to evaluate its future application in devices.

A Copper(I)-Thioarsenate(III) Inorganic Framework Directed by [Ni(en)3]2.

One novel three-dimensional (3-D) copper(I)-thioarsenate(III) [Ni(en)3]Cu4As4S9 (1, en = ethylenediamine) has been solvothermally prepared with the utilization of the in situ formation of [Ni(en)3]2+ complex as structure-directing agent (SDA). 1 contains cubane-like [Cu8S12]16- clusters and rare tetrameric [As4S9]6- units, which are interconnected to generate the first example of a 3-D anionic framework [Cu4As4S9]n2n-, topologically identical to pyrite, and having large channels filled by [Ni(en)3]2+ complex cations. 1 is a potential wide-band-gap semiconductor with an energy gap of 1.91 eV that exhibits selectively photocatalytic degradation of methylene blue under visible-light irradiation. The density functional theory calculation, photocurrent response, and magnetic properties of 1 were also investigated.

Metal-organic frameworks: a future toolbox for biomedicine?

The present review focuses on the use of Metal-Organic Frameworks, (MOFs) highlighting the most recent developments in the biological field. This review assesses, in the first instance, the cytotoxicity of MOFs (particularly those used for various biological applications described throughout this review), and shows that for standard MOFs based on metals already present in active molecules of the human body, toxicity is not a significant limitation. Here we underline the MIL-, UiO- and ZIF-series of MOFs which remain until now the most used materials in drug delivery of active pharmaceutical ingredients (APIs), such as antitumourals or retroviral drugs (with high loading and slow release time). Porosity remains undoubtedly the most studied key property of MOFs, that allows the protection of active biomolecules such as enzymes or the development of antimicrobial materials. Emphasis is given on the usage of MOFs for the detection of biomarkers in biological fluids such as urine and blood (detection of cystinuria, identification of penicillin anaphylaxis, urea, bilirubin, biomarkers related to human intoxication, tumoural indicators, among several others), for which a number of simple devices (such as paper strips) were developed. Despite the remarkable and promising results presented in recent years, the literature remains scarce (mostly non-existent) in terms of direct comparison of these novel technologies with the solutions presently available in the market. Action on this side may make the difference in the next years concerning research on MOFs, to see if some of these materials may reach the end-user as new and more efficient treatments or detection approaches.

Bone Tissue Disorders: Healing Through Coordination Chemistry.

Osteoporosis, Paget's disease and osteosarcoma are a few examples of bone tissue disorders that affect millions of people worldwide. These conditions can strictly limit the lifestyle of patients and may even lead to their demise. To prevent this or, at least, try to manage the situation, there are several treatments available on the market. Notwithstanding, research has been driven by the possibility to improve the existing therapies, as well as to find new approaches that could better respond to these diseases. In this Review the path is shown through which, in recent years, coordination compounds have been prepared and manufactured to be applied in the management of bone tissue disorders. Starting with the design and preparation of the coordination compounds with various dimensionalities, two approaches have been used: (1) they are prepared as three-dimensional cages that can act as delivery systems for therapeutic substances, or (2) they are constructed/prepared from compounds with intrinsic therapeutic properties. Following this, several strategies have been explored to manufacture the effective delivery to the patients. The versatility of coordination compounds has allowed their use in the preparation of drug tablets, coatings for titanium implants, or even scaffolds for bone tissue engineering. In the end, it becomes clear that these compounds can be a valuable approach to reach a better treatment for bone tissue disorders. Nonetheless, along the road, a few bumps have appeared concerning the therapeutic profile, such as the effect of the structural arrangement or particle size.

Unique Two-Dimensional Indium Telluride Templated by a Rare Wheel-Shaped Heterobimetallic Mn/In Cluster.

A new indium telluride, [Mn4.78In2.22(ea)12]n[In9.79Mn0.21Te17]n (where Hea = ethanolamine), containing unprecedented nonsupertetrahedral [In9.79Mn0.21Te21] units is the first example of a two-dimensional indium telluride framework templated by a rare high-nuclearity wheel-shaped heterometallic [Mn4.78In2.22(ea)12]4.22+ cluster. The photocurrent response and magnetic properties were investigated.

Empowering the Medicinal Applications of Bisphosphonates by Unveiling their Synthesis Details.

Bisphosphonates (BPs), well-known medicinal compounds used for osteoporosis management, are currently the target of intensive research, from basic pre-formulation studies to more advanced stages of clinical practice. The high demand by the pharmaceutical industry inherently requires an easy, efficient and quick preparation of BPs. Current synthetic procedures are, however, still far from ideal. This work presents a comprehensive compilation of reports on the synthesis of the commercially available bisphosphonates that are pharmaceutical active ingredients. Current limitations to the conventional synthesis are assessed, and paths towards their improvement are described, either through the use of alternative solvents and/or by selecting appropriate ratios of the reactants. Innovative processes, such as microwave-assisted synthesis, are presented as more environmental-friendly and effective methods. The main advantages and setbacks of all syntheses are provided as a way to clarify and promote the development of simpler and improved procedures. Only in this way one will be able to efficiently respond to the future high demand of BPs, mostly due to the increase in life span in occidental countries.

Coordination Polymers Based on a Biphenyl Tetraphosphonate Linker: Synthesis Control and Photoluminescence.

In this work, we used the rigid tetrapodal organic linker, [1,1'-biphenyl]-3,3',5,5'-tetrayltetrakis(phosphonic acid) (H8btp), for the preparation of two lanthanide-organic framework families of compounds: layered [Ln7(H5btp)4(H5.5btp)2(H6btp)2(H2O)12]∙23.5H2O∙MeOH [where Ln3+ = Eu3+ (1Eu) and Gd3+ (1Gd)], prepared using microwave-irradiation followed by slow evaporation; 3D [Ln4(H3btp)(H4btp)(H5btp)(H2O)8]∙3H2O [where Ln3+ = Ce3+ (2Ce), Pr3+ (2Pr), and Nd3+ (2Nd)], obtained from conventional hydro(solvo)thermal synthesis. It is shown that in this system, by carefully selecting the synthetic method and the metal centers, one can increase the dimensionality of the materials, also increasing structural robustness (particularly to the release of the various solvent molecules). Compound 1 is composed of 2D layers stacked on top of each other and maintained by weak π-π interactions, with each layer formed by discrete 1D organic cylinders stacked in a typical brick-wall-like fashion, with water molecules occupying the free space in-between cylinders. Compound 2, on the other hand, is a 3D structure with small channels filled with crystallization water molecules. A full solid-state characterization of 1 and 2 is presented (FT-IR spectroscopy, SEM microscopy, thermogravimetric studies, powder X-ray diffraction and thermodiffractometry). The photoluminescence of 1Eu was investigated.

Near-Infrared Ratiometric Luminescent Thermometer Based on a New Lanthanide Silicate.

A new lanthanide silicate system, Na2 K[Ln3 Si6 O18 ] (Ln=Lu, Yb/ Er, Lu/Eu, or Lu/Yb/Er), comprising microcrystals embedded in an amorphous siliceous matrix, obtained by sintering at 1373 K a Na3 K[Ln2 Si6 O17 ]⋅3 H2 O nano-crystalline precursor, is reported. The crystal structure of these lanthanide silicates was solved from high-resolution synchrotron power X-ray diffraction data collected at 110 K, and further supported by 29 Si MAS NMR and Eu3+ luminescence. The materials crystallize in the Pi triclinic centrosymmetric space group, exhibiting a dense framework consisting of hexameric [Si6 O18 ]12- cyclosilicate units, and chains of two distinct {LnO6 } octahedra. Na2 K[(Lu0.75 Yb0.20 Er0.05 )3 Si6 O18 ] is the first example of a lanthanide silicate operative as a near-infrared ratiometric luminescent thermometer, with good sensitivity at cryogenic temperatures (<100 K). Upon excitation at 903 nm, the ratio between the 2 F7/2 →2 F5/2 (Yb3+ ) and 4 I13/2 →4 I15/2 (Er3+ ) emissions was used for sensing temperature in the 12-450 K range, reaching a maximum thermal sensitivity of 2.6 % K-1 at 26.8 K.

Solid-state studies and antioxidant properties of the γ-cyclodextrin·fisetin inclusion compound.

Fisetin is a natural antioxidant with a wide range of nutraceutical properties, including antidiabetic, neuroprotecting, and suppression or prevention of tumors. The present work describes the preparation of a water-soluble, solid inclusion compound of fisetin with gamma-cyclodextrin (γ-CD), a cyclic oligosaccharide approved for human consumption. A detailed physicochemical analysis of the product is carried out using elemental analysis, powder X-ray diffraction (PXRD), Raman, infrared and 13C{1H} CP-MAS NMR spectroscopies, and thermal analysis (TGA) to verify fisetin inclusion and to present a hypothetical structural arrangement for the host-guest units. The antioxidant activity of the γ-CD·fisetin inclusion compound is evaluated by the DPPH assay.

A Lamellar Coordination Polymer with Remarkable Catalytic Activity.

A positively charged lamellar coordination polymer based on a flexible triphosphonic acid linker is reported. [Gd(H4 nmp)(H2 O)2 ]Cl⋅2 H2 O (1) [H6 nmp=nitrilotris(methylenephosphonic acid)] was obtained by a one-pot approach by using water as a green solvent and by forcing the inclusion of additional acid sites by employing HCl in the synthesis. Compound 1 acts as a versatile heterogeneous acid catalyst with outstanding activity in organic reactions such as alcoholysis of styrene oxide, acetalization of benzaldehyde and cyclohexanaldehyde and ketalization of cyclohexanone. For all reaction systems, very high conversions were reached (92-97 %) in only 15-30 min under mild conditions (35 °C, atmospheric pressure). The coordination polymer exhibits a protonic conductivity of 1.23×10(-5)  S cm(-1) at 98 % relative humidity and 40 °C.

Multifunctional metal-organic frameworks: from academia to industrial applications.

After three decades of intense and fundamental research on metal-organic frameworks (MOFs), is there anything left to say or to explain? The synthesis and properties of MOFs have already been comprehensively described elsewhere. It is time, however, to prove the nature of their true usability: technological applications based on these extended materials require development and implementation as a natural consequence of the up-to-known intensive research focused on their design and preparation. The current large number of reviews on MOFs emphasizes practical strategies to develop novel networks with varied crystal size, shape and topology, being mainly devoted to academic concerns. The present survey intends to push the boundaries and summarise the state-of-the-art on the preparation of promising (multi)functional MOFs in worldwide laboratories and their use as materials for industrial implementation. This review starts, on the one hand, to describe several tools and striking examples of remarkable and recent (multi)functional MOFs exhibiting outstanding properties (e.g., in gas adsorption and separation, selective sorption of harmful compounds, heterogeneous catalysis, luminescent and corrosion protectants). On the other hand, and in a second part, it intends to use these examples of MOFs to incite scientists to move towards the transference of knowledge from the laboratories to the industry. Within this context, we exhaustively review the many efforts of several worldwide commercial companies to bring functional MOFs towards the daily use, analysing the various patents and applications reported to date. Overall, this review goes from the very basic concepts of functional MOF engineering and preparation ending up in their industrial production on a large scale and direct applications in society.

Porphyrin-Based Metal-Organic Frameworks as Heterogeneous Catalysts in Oxidation Reactions.

Porphyrin-based Metal-Organic Frameworks (Por-MOFs) constitute a special branch of the wide MOF family that has proven its own value and high potential in different applications. In this mini-review the application of these materials as catalysts in oxidation reactions is highlighted.

Photodynamic inactivation of Escherichia coli with cationic ammonium Zn(II) phthalocyanines.

The aim of this work was the development of a family of novel water soluble Zinc(II) phthalocyanines (Pc) for the photodynamic inactivation of Gram-negative bacteria. Pc derivatives 1a, 2a and 3a containing trimethylammonium groups with varied number and nature of the groups at peripheral positions were synthesized by cyclotetramerization of dimethyl amino substituted phthalonitriles in the presence of zinc powder, using 1-chloronaphthalene as a solvent, followed by cationization using dimethyl sulfate. The solubility, singlet oxygen generation ((1)O2) and stability/photostability of each Pc were evaluated as well as the affinity to bacterial cells and their photosensitizing potential against a recombinant bioluminescent Escherichia coli strain, used as a biological model for Gram negative bacteria. The efficiency of photodynamic inactivation was assessed under white and red light at an irradiance of 150 mW cm(-2). All Pc were soluble in phosphate buffer saline and in dimethyl sulfoxide and demonstrated good stability/photostability. The photochemical parameters reveal that Pc 2a and 3a are more efficient singlet oxygen producers than Pc 1a, for which singlet oxygen generation could not be demonstrated. Pc 2a and 3a caused photosensitization in E. coli. The inactivation factors attained with red light were, however, generally higher than those with white light. Under red light Pc 3a and 2a caused, respectively, 5.6 and 4.9 log reduction in the bioluminescence of the E. coli while, with white light, the corresponding inactivation factors were 2.5 and 0.5 log. The order of the PDI efficiency (3a > 2a ⋙ 1a) was determined by the combined effect of solubility, singlet oxygen generation ability and affinity to bacterial cells. Ammonium phthalocyanines with eight charges or containing halogen atoms such as chlorine, when irradiated with red light can, therefore, be regarded as promising photosensitizers for the inactivation of Gram-negative bacteria.

A new 3,5-bisporphyrinylpyridine derivative as a fluorescent ratiometric probe for zinc ions.

A new 3,5-disubstituted pyridine with two porphyrin moieties was prepared through an efficient synthetic approach involving 2-formyl-5,10,15,20-tetraphenylporphyrin (1), piperidine, and catalytic amounts of [La(OTf)3]. 3,5-Bis(5,10,15,20-tetraphenylporphyrin-2-ylmethyl)pyridine (2) was fully characterized and its sensing ability towards Zn(2+), Cu(2+), Hg(2+), Cd(2+), and Ag(+) was evaluated in solution by absorption and fluorescence spectroscopy and in gas phase by using matrix-assisted laser desorption/ionization (MALDI)-TOF mass spectrometry. Strong changes in the ground and excited state were detected in the case of the soft metal ions Zn(2+), Cd(2+), Hg(2+), and Cu(2+). A three-metal-per-ligand molar ratio was obtained in all cases and a significant ratiometric behavior was observed in the presence of Zn(2+) with the appearance of a new band at 608 nm, which can be assigned to a metal-to-ligand charge transfer. The system was able to quantify 79 ppb of Zn(2+) and the theoretical calculations are in accordance with the stoichiometry observed in solution. The gas-phase sensorial ability of compound 2 towards all metal ions was confirmed by using MALDI-TOF MS and in solid state by using polymeric films of polymethylmethacrylate (PMMA) doped with ligand 2. The results showed that compound 2 can be analytically used to develop new colorimetric molecular devices that are able to discriminate between Hg(2+) and Zn(2+) in solid phase. The crystal structure of Zn(II) complex of 3,5-bisporphyrinylpyridine was unequivocally elucidated by using single-crystal X-ray diffraction studies.

Bis(4-hydroxy-2H-chromen-2-one): synthesis and effects on leukemic cell lines proliferation and NF-κB regulation.

Synthesis of the bis-4-hydroxycoumarin-type compound, 3,3'-[3-(2-hydroxyphenyl)-3-oxopropane-1,1-diyl]bis(4-hydroxy-2H-chromen-2-one), was performed by two alternative pathways, either involving a basic organocatalyzed 1,4-conjugate addition tandem reaction of 4-hydroxycoumarin on chromone-3-carboxylic acid, or a double condensation of 4-hydroxycoumarin on ω-formyl-2'-hydroxyacetophenone. The anti-proliferative effects of the bis-4-hydroxycoumarin-type compound on human K-562 (chronic myeloid leukaemia) and JURKAT (acute T-cell leukaemia) cell lines using trypan blue staining, as well as its involvement in nuclear factor-kappa B (NF-κB) regulation analyzed by luciferase reporter gene assay, gene expression analysis and western blots were analysed. This compound inhibited TNFα-induced NF-κB activation in K-562 (IC50 17.5 µM) and JURKAT (IC50 19.0 µM) cell lines, after 8h of incubation. Interestingly, it exerted mainly cytostatic effects at low doses on both cell lines tested, whereas it decreased JURKAT cell viability starting at 50 µM from 24h of treatment. Importantly, it did not affect the viability of peripheral blood mononuclear cells (PBMCs) from healthy donors, even at concentrations above 100 µM.

(E)-3-[(Di-methyl-amino)-methyl-idene]-4-phenyl-1-(prop-2-yn-yl)-1H-1,5-benzodiazepin-2(3H)-one.

The title compound, C21H19N3O, exhibits an E configuration with respect to the C=C bond between the benzodiazepine and tri-methyl-amine groups. The seven-membered diazepine ring displays a boat conformation. In the crystal, mol-ecules are linked by a C-H⋯O hydrogen bond, forming a chain along [110].