Animal Feedlots and Domestic Wastewater Discharges are Likely Sources of N-Nitrosodimethylamine (NDMA) Precursors in Midwestern Watersheds.

N-nitrosodimethylamine (NDMA) precursor concentrations along four major rivers in Minnesota, USA were quantified and correlated with watershed land cover types, anthropogenic activity, and organic matter characteristics. River water samples (36 in total) were chloraminated under uniform formation conditions (UFC) before and after lime-softening treatment, and the resulting NDMA concentrations were quantified (NDMAUFC). Regarding land cover, NDMAUFC in raw river water exhibited weak positive correlations with urban land (ρ = 0.33, p = 0.05) and cropland coverage (ρ = 0.35, p = 0.04). For anthropogenic activity, NDMAUFC in raw river water positively correlated with the number of feedlots (ρ = 0.57), total weight of animals (ρ = 0.68), and total number of domestic wastewater treatment plants (WWTPs; ρ = 0.63) with p < 0.01. NDMAUFC positively correlated with region IV fluorescence intensity from fluorescence excitation-emission spectra (ρ = 0.70, p < 0.01). Lime softening of river water typically increased NDMAUFC and preferentially removed organic matter that fluoresces in region V, suggesting that the organic matter in this region decreases NDMAUFC by competing for available chloramines. Overall, animal feedlots, along with domestic WWTPs, are predominant sources of NDMA precursors in the studied watersheds, while croplands and urban runoff are of lesser importance.

Fluorinated Pharmaceutical and Pesticide Photolysis: Investigating Reactivity and Identifying Fluorinated Products by Combining Computational Chemistry,19F NMR, and Mass Spectrometry.

Fluorinated breakdown products from photolysis of pharmaceuticals and pesticides are of environmental concern due to their potential persistence and toxicity. While mass spectrometry workflows have been shown to be useful in identifying products, they fall short for fluorinated products and may miss up to 90% of products. Studies have shown that 19F NMR measurements assist in identifying and quantifying reaction products, but this protocol can be further developed by incorporating computations. Density functional theory was used to compute 19F NMR shifts for parent and product structures in photolysis reactions. Computations predicted NMR spectra of compounds with an R2 of 0.98. Computed shifts for several isolated product structures from LC-HRMS matched the experimental shifts with <0.7 ppm error. Multiple products including products that share the same shift that were not previously reported were identified and quantified using computational shifts, including aliphatic products in the range of -80 to -88 ppm. Thus, photolysis of fluorinated pharmaceuticals and pesticides can result in compounds that are polyfluorinated alkyl substances (PFAS), including aliphatic-CF3 or vinyl-CF2 products derived from heteroaromatic-CF3 groups. C-F bond-breaking enthalpies and electron densities around the fluorine motifs agreed well with the experimentally observed defluorination of CF3 groups. Combining experimental-computational 19F NMR allows quantification of products identified via LC-HRMS without the need for authentic standards. These results have applications for studies of environmental fate and analysis of fluorinated pharmaceuticals and pesticides in development.

Fluorous Liquids for Magnetic Resonance-Based Thermometry with Enhanced Responsiveness and Environmental Degradation.

Accurate temperature measurement via magnetic resonance is valuable for both in vitro and in vivo analysis of local tissue for evaluating disease pathology and medical interventions. 1H MRI-based thermometry is used clinically but is susceptible to error from magnetic field drift and low sensitivity in fatty tissue and requires a reference for absolute temperature determination. As an alternative, perfluorotributylamine (PFTBA), a perfluorocarbon liquid for 19F MRI thermometry, is based on chemical shift responsiveness and approaches the sensitivity of 1H MRI thermometry agents; however, environmental persistence, greenhouse gas concerns, and multiple resonances which can lead to MRI artifacts indicate a need for alternative sensors. Using a 19F NMR-based structure-property study of synthetic organofluorine molecules, this research develops new organofluorine liquids with improved temperature responsiveness, high signal, and reduced nonmagnetically equivalent fluorine resonances. Environmental degradation analysis using reverse-phase HPLC and quantitative 19F NMR demonstrates a rapid degradation profile mediated via the aryl fluorine core of temperature sensors. Our findings show that our lead liquid temperature sensor, DD-1, can be made in high yield in a single step and possesses an improved responsiveness over our prior work and an 83% increase in aqueous thermal responsiveness over PFTBA. Degradation studies indicate robust degradation with half-lives of less than two hours under photolysis conditions for the parent compound and formation of other fluorinated products. The improved performance of DD-1 and its susceptibility to environmental degradation highlight a new lead fluorous liquid for thermometry applications.

Spatiotemporal Variability in N-Nitrosodimethylamine Precursor Levels in a Watershed Impacted by Agricultural Activities and Municipal Wastewater Discharges and Effects of Lime Softening.

The Crow River, a tributary of the Mississippi River in Minnesota, U.S.A., that is impacted by agricultural activities and municipal wastewater discharges, was sampled approximately monthly at 12 locations over 18 months to investigate temporal and spatial variations in N-nitrosodimethylamine (NDMA) precursor levels. NDMA precursors were quantified primarily by measuring NDMA formed under the low chloramine dose uniform formation conditions protocol (NDMAUFC) and occasionally using the high dose formation potential protocol (NDMAFP). Raw water NDMAUFC concentrations (2.2 to 128 ng/L) exhibited substantial temporal variation but relatively little spatial variation. An increase in NDMAUFC was observed for 126 of 169 water samples after lime-softening treatment. A kinetic model indicates that under chloramine-limited UFC test conditions, the increase in NDMAUFC can be attributed to a decrease in competition between precursors and natural organic matter (NOM) for chloramines and reduced interactions of precursors with NOM. NDMAUFC concentrations correlated positively with dissolved nitrogen concentration (ρ = 0.44, p < 0.01) when excluding the spring snowmelt period and negatively correlated with dissolved organic carbon concentration (ρ = -0.47, p < 0.01). Overall, NDMA precursor levels were highly dynamic and strongly affected by lime-softening treatment.

Wavelength-Dependent UV-LED Photolysis of Fluorinated Pesticides and Pharmaceuticals.

The wavelength dependence of photoproduct formation and quantum yields was evaluated for fluorinated pesticides and pharmaceuticals using UV-light emitting diodes (LEDs) with 255, 275, 308, 365, and 405 nm peak wavelengths. The fluorinated compounds chosen were saflufenacil, penoxsulam, sulfoxaflor, fluoxetine, 4-nitro-3-trifluoromethylphenol (TFM), florasulam, voriconazole, and favipiravir, covering key fluorine motifs (benzylic-CF3, heteroaromatic-CF3, aryl-F, and heteroaromatic-F). Quantum yields for the compounds were consistently higher for UV-C as compared to UV-A wavelengths and did not show the same trend as molar absorptivity. For all compounds except favipiravir and TFM, the fastest degradation was observed using 255 or 275 nm light, despite the low power of the LEDs. Using quantitative 19F NMR, fluoride, trifluoroacetate, and additional fluorinated byproducts were tracked and quantified. Trifluoroacetate was observed for both Ar-CF3 and Het-CF3 motifs and increased at longer wavelengths for Het-CF3. Fluoride formation from Het-CF3 was significantly lower as compared to other motifs. Ar-F and Het-F motifs readily formed fluoride at all wavelengths. For Het-CF3 and some Ar-CF3 motifs, 365 nm light produced either a greater number of or different major products. Aliphatic-CF2/CF3 products were stable under all wavelengths. These results assist in selecting the most efficient wavelengths for UV-LED degradation and informing future design of fluorinated compounds.

Quaternary Ammonium Compounds (QACs) in Wastewater Influent and Effluent Throughout the COVID-19 Pandemic.

Quaternary ammonium compounds (QACs) are used in consumer and industrial products, including disinfectants. Due to the COVID-19 pandemic, disinfectant use has increased, purportedly increasing loads to wastewater treatment plants and the environment. To understand how the increased usage has affected QAC loadings to treatment plants and to determine how effectively plants remove QACs from liquid effluent that is discharged to surface and groundwaters, influent and effluent wastewater samples were collected from four treatment plants (treatment capacities < 5 MGD to > 100 MGD) for 21 months beginning in May 2020. Influent QAC concentrations were hundreds of µg/L and effluent QAC concentrations were < 1 µg/L, corresponding to an average removal of 98% from all four plants. The most prevalent QACs in influent were those used most commonly in disinfectants, specifically benzylalkyldimethylammonium compounds (BACs) and short-chain dialkyldimethylammonium compounds (DADMACs), and influent levels of these compounds were correlated with QAC sales. Prior to this study, ethylbenzylalkyldimethylammonium compounds (EtBACs) had not been studied, and they comprised 13 ± 6% of QACs in influent. While removal was high at all plants, low µg/L concentrations were still continuously discharged into the environment. For QACs with equivalent alkyl chain lengths, those with aromatic substituents (BACs and EtBACs) appear to be removed more effectively than those with only alkyl chains (DADMACs).

Quaternary Ammonium Compounds: A Chemical Class of Emerging Concern.

Quaternary ammonium compounds (QACs), a large class of chemicals that includes high production volume substances, have been used for decades as antimicrobials, preservatives, and antistatic agents and for other functions in cleaning, disinfecting, personal care products, and durable consumer goods. QAC use has accelerated in response to the COVID-19 pandemic and the banning of 19 antimicrobials from several personal care products by the US Food and Drug Administration in 2016. Studies conducted before and after the onset of the pandemic indicate increased human exposure to QACs. Environmental releases of these chemicals have also increased. Emerging information on adverse environmental and human health impacts of QACs is motivating a reconsideration of the risks and benefits across the life cycle of their production, use, and disposal. This work presents a critical review of the literature and scientific perspective developed by a multidisciplinary, multi-institutional team of authors from academia, governmental, and nonprofit organizations. The review evaluates currently available information on the ecological and human health profile of QACs and identifies multiple areas of potential concern. Adverse ecological effects include acute and chronic toxicity to susceptible aquatic organisms, with concentrations of some QACs approaching levels of concern. Suspected or known adverse health outcomes include dermal and respiratory effects, developmental and reproductive toxicity, disruption of metabolic function such as lipid homeostasis, and impairment of mitochondrial function. QACs' role in antimicrobial resistance has also been demonstrated. In the US regulatory system, how a QAC is managed depends on how it is used, for example in pesticides or personal care products. This can result in the same QACs receiving different degrees of scrutiny depending on the use and the agency regulating it. Further, the US Environmental Protection Agency's current method of grouping QACs based on structure, first proposed in 1988, is insufficient to address the wide range of QAC chemistries, potential toxicities, and exposure scenarios. Consequently, exposures to common mixtures of QACs and from multiple sources remain largely unassessed. Some restrictions on the use of QACs have been implemented in the US and elsewhere, primarily focused on personal care products. Assessing the risks posed by QACs is hampered by their vast structural diversity and a lack of quantitative data on exposure and toxicity for the majority of these compounds. This review identifies important data gaps and provides research and policy recommendations for preserving the utility of QAC chemistries while also seeking to limit adverse environmental and human health effects.

Finding Fluorine: Photoproduct Formation during the Photolysis of Fluorinated Pesticides.

The photolysis of pesticides with different fluorine motifs was evaluated to quantify the formation of fluorinated products in buffered aqueous systems, advanced oxidation (AOP) and reduction processes (ARP), and river water. Simulated sunlight quantum yields at pH 7 were 0.0033, 0.0025, 0.0015, and 0.00012 for penoxsulam, florasulam, sulfoxaflor, and fluroxypyr, respectively. The bimolecular rate constants with hydroxyl radicals were 2 to 5.7 × 1010 M-1 s-1 and, with sulfate radicals, 1.6 to 2.6 × 108 M-1 s-1 for penoxsulam, florasulam, and fluroxypyr, respectively. The rate constants of sulfoxaflor were 100-fold lower. Using quantitative 19F-NMR, complete fluorine mass balances were obtained. The maximum fluoride formation was 53.4 and 87.4% for penoxsulam and florasulam under ARP conditions, and 6.1 and 100% for sulfoxaflor and fluroxypyr under AOP conditions. Heteroaromatic CF3 and aliphatic CF2 groups were retained in multiple fluorinated photoproducts. Aryl F and heteroaromatic F groups were readily defluorinated to fluoride. CF3 and CF2 groups formed trifluoroacetate and difluoroacetate, and yields increased under oxidizing conditions. 19F-NMR chemical shifts and coupling analysis provided information on hydrogen loss on adjacent bonds or changes in chirality. Mass spectrometry results were consistent with the observed 19F-NMR products. These results will assist in selecting treatment processes for specific fluorine motifs and in the design of agrochemicals to reduce byproduct formation.

Exploring the Utility of Compound-Specific Isotope Analysis for Assessing Ferrous Iron-Mediated Reduction of RDX in the Subsurface.

Subsurface contamination with the explosive hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) at ordnance production and testing sites is a problem because of the persistence, mobility, and toxicity of RDX and the formation of toxic products under anoxic conditions. While the utility of compound-specific isotope analysis for inferring natural attenuation pathways from stable isotope ratios has been demonstrated, the stable isotope fractionation for RDX reduction by iron-bearing minerals remains unknown. Here, we evaluated N and C isotope fractionation of RDX during reduction by Fe(II) associated with Fe minerals and natural sediments and applied N isotope ratios to the assessment of mineral-catalyzed RDX reduction in a contaminant plume and in sediment columns treated by in situ chemical reduction. Laboratory studies revealed that RDX was reduced to nitroso compounds without denitration and the concomitant ring cleavage. Fe(II)/iron oxide mineral-catalyzed reactions exhibited N isotope enrichment factors, εN, between -6.3±0.3‰ and -8.2±0.2‰, corresponding to an apparent 15N kinetic isotope effect of 1.04-1.05. The observed variations of the δ15N of ∼15‰ in RDX from groundwater samples suggested an extent of reductive transformation of 85% at an ammunition plant. Conversely, we observed masking of N isotope fractionation after RDX reduction in laboratory flow-through systems, which was presumably due to limited accessibility to reactive Fe(II).

Risk of Gastrointestinal Bleeding With Extended Use of Nonsteroidal Anti-Inflammatory Drug Analgesia After Joint Arthroplasty.

BACKGROUND: Chronic nonsteroidal anti-inflammatory drug (NSAID) use is associated with gastrointestinal bleeding via inhibition of endogenous mucosal protection and platelet aggregation. This study aimed to determine whether extended NSAIDs after joint arthroplasty is associated with increased risk of gastrointestinal bleeding. METHODS: This was a retrospective study examining 28,794 adults who underwent joint arthroplasty by one of 50 surgeons from 2016 to 2018. Episodes of gastrointestinal bleeding within 90 days postoperatively were identified prospectively. Postoperative medications were reported directly by patients with electronic questionnaires. The primary analysis was performed using binary logistic regression. RESULTS: A total of 74 (0.26%) episodes of gastrointestinal bleeding occurred within 90 days (median 8 days) postoperatively. Of 5086 patients with complete data included in the primary analysis, 59.6% had used NSAIDs with median duration of 2 weeks (interquartile range, 0-6 weeks). Patients with gastrointestinal bleeding were significantly older (71.3 vs 67.0 years), required longer hospitalizations (2.1 vs 1.5 days), and more commonly had a history of peptic ulcers (10.8% vs 0.9%). However, there was no positive association between NSAID use and gastrointestinal bleeding. In fact, the odds of gastrointestinal bleeding were lower in patients taking NSAIDs. Gastrointestinal bleeding was associated with anticoagulants, antiplatelet agents, and, to a lesser extent, aspirin. CONCLUSION: NSAIDs were not associated with gastrointestinal bleeding and may be prescribed safely for a majority of patients after joint arthroplasty. The greatest odds of gastrointestinal bleeding occurred in patients with peptic ulcer disease and those who received antiplatelet and anticoagulation agents. Increasing age and bilateral surgery were also associated with gastrointestinal bleeding. LEVEL OF EVIDENCE: Level III.

Assessment of 2,4-Dinitroanisole Transformation Using Compound-Specific Isotope Analysis after In Situ Chemical Reduction of Iron Oxides.

Ferrous iron-bearing minerals are important reductants in the contaminated subsurface, but their availability for the reduction of anthropogenic pollutants is often limited by competition with other electron acceptors including microorganisms and poor accessibility to Fe(II) in complex hydrogeologic settings. The supply of external electron donors through in situ chemical reduction (ISCR) has been proposed as one remediation approach, but the quantification of pollutant transformation is complicated by the perturbations introduced to the subsurface by ISCR. Here, we evaluate the application of compound specific isotope analysis (CSIA) for monitoring the reduction of 2,4-dinitroanisole (DNAN), a component of insensitive munitions formulations, by mineral-bound Fe(II) generated through ISCR of subsurface material from two field sites. Electron balances from laboratory experiments in batch and column reactors showed that 3.6% to 11% of the total Fe in the sediments was available for the reduction of DNAN and its partially reduced intermediates after dithionite treatment. The extent of DNAN reduction was successfully quantified from its N isotope fractionation measured in the column effluent based on the derivation of a N isotope enrichment factor, εN, derived from a comprehensive series of isotope fractionation experiments with numerous Fe(II)-bearing minerals as well as dithionite-reduced subsurface materials. Our observations illustrate the utility of CSIA as a robust approach to evaluate the success of in situ remediation through abiotic contaminant reduction.

In Situ Sequestration of Perfluoroalkyl Substances Using Polymer-Stabilized Powdered Activated Carbon.

Remediation of groundwater impacted by per- and polyfluoroalkyl substances (PFAS) is particularly challenging due to the resistance of the molecule to oxidation because of the strength of the carbon-fluorine bond and the need to achieve low nanogram per liter drinking water targets. Previous studies have shown that activated carbon is an effective sorbent for removal of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) in conventional water treatment systems. The objective of this study was to evaluate the in situ delivery and sorptive capacity of an aqueous suspension containing powdered activated carbon (PAC) stabilized with polydiallyldimethylammonium chloride (polyDADMAC). Batch reactor studies demonstrated substantial adsorption of PFOA and PFOS by polyDADMAC-stabilized PAC, which yielded Freundlich adsorption coefficients of 156 and 629 L/g-n, respectively. In columns packed with 40-50 mesh Ottawa sand, injection of a PAC (1000 mg/L) + polyDADMAC (5000 mg/L) suspension created a sorptive region that increased subsequent PFOA and PFOS retention by 3 orders of magnitude relative to untreated control columns, consistent with the mass of retained PAC. Experiments conducted in a heterogeneous aquifer cell further demonstrated the potential for stabilized-PAC to be an effective in situ treatment option for PFAS-impacted groundwater.

Prediction of Photochemically Produced Reactive Intermediates in Surface Waters via Satellite Remote Sensing.

Absorption of solar radiation by colored dissolved organic matter (CDOM) in surface waters results in the formation of photochemically produced reactive intermediates (PPRIs) that react with pollutants in water. Knowing the steady-state concentrations of PPRIs ([PPRI]ss) is critical to predicting the persistence of pollutants in sunlit surface waters. CDOM levels (a440) can be measured remotely for lakes over large areas using satellite imagery. Laboratory measurements of [PPRI]ss and apparent quantum yields (Φ) of three PPRIs (3DOM*, 1O2, and •OH) were made for 24 lake samples under simulated sunlight. The total rate of light absorption by the water samples (Ra), the rates of formation (Rf), and [PPRI]ss of 3DOM* and 1O2 linearly increased with increasing a440. The production rate of •OH was linearly correlated with a440, but the steady-state concentration was best fit by a logarithmic function. The relationship between measured a440 and Landsat 8 reflectance was used to map a440 for more than 10 000 lakes across Minnesota. Relationships of a440 with Rf, [PPRIs]ss, and Ra were coupled with satellite-based a440 assessments to map reactive species production rates and concentrations as well as contaminant transformation rates. This study demonstrates the potential for using satellite imagery for estimating contaminant loss via indirect photolysis in lakes.

Modeling alginate encapsulation system for biological hydrogen production.

Wastewater treatment using encapsulated biomass is a promising approach for high-rate resource recovery. Encapsulation matrices can be customized to achieve desired biomass retention and mass transport performance. This, in turn, facilitates treatment of different waste streams. In this study, a model was developed to describe calcium-alginate beads encapsulating hydrogen-producing biomass, with the goal of enabling appropriate a priori customization of the system. The model was based on a classic diffusion-reaction model, but also included the growth of encapsulated biomass and product inhibition. Experimental data were used to verify the model, which accurately described the effect of hydraulic retention time, bead size, and feed concentration on resource (hydrogen) recovery from brewery wastewater. Sensitivity analyses revealed that the hydrogen production rate was insensitive to substrate diffusivity and bead size, but sensitive to the substrate partition coefficient, initial encapsulated biomass concentration, and the total volume of beads in the reactor, demonstrating that this system was growth-limited rather than diffusion-limited under the tested conditions. Because the model quantifies the relationship between the hydrogen production rate and various input and operating parameters, it should be possible to extend the model to determine the most cost-effective system for optimal performance with a given waste stream.

Color, chlorophyll a, and suspended solids effects on Secchi depth in lakes: implications for trophic state assessment.

Secchi depth (SD), a primary metric to assess trophic state, is controlled in many lakes by algal densities, measured as chlorophyll-a (chl-a) concentration. Two other optically related water quality variables also directly affect SD: non-algal suspended solids (SSNA ) and colored dissolved organic matter (CDOM, expressed as the absorption coefficient at 440 nm, a440 ). Using a database of ~1,460 samples from ~625 inland lake basins in Minnesota and two other Upper Midwest states, Wisconsin and Michigan, we analyzed relationships among these variables, with special focus on CDOM levels that influence SD values and the Minnesota SD standards used to assess eutrophication impairment of lakes. Log-transformed chl-a, total suspended solids (TSS), and SD were strongly correlated with each other; log(a440 ) had major effects on log(SD) but was only weakly correlated with log(chl-a) and log(TSS). Multiple regression models for log(SD) and 1/SD based on the three driving variables (chl-a, SSNA , and CDOM) explained ~80% of the variance in SD in the whole data set, but substantial differences in the form of the best-fit relationships were found between major ecoregions. High chl-a concentrations (> 50 µg/L) and TSS (> 20 mg/L) rarely occurred in lakes with high CDOM (a440  > ~4 m-1 ), and all lakes with a440  > 8 m-1 had SD ≤ 2.0 m despite low chl-a values (<10 µg/L) in most lakes. Further statistical analyses revealed that CDOM has significant effects on SD at a440 values > ~ 4 m-1 . Thus, SD is not an accurate trophic state metric in moderately to highly colored lakes, and Minnesota's 2-m SD criterion should not be the sole metric to assess eutrophication impairment in warm/cool-water lakes of the Northern Lakes and Forest ecoregion. More generally, trophic state assessments using SD in regions with large landscape sources of CDOM need to account for effects of CDOM on SD.

High Pressure Size Exclusion Chromatography (HPSEC) Determination of Dissolved Organic Matter Molecular Weight Revisited: Accounting for Changes in Stationary Phases, Analytical Standards, and Isolation Methods.

We reassessed the molecular weight of dissolved organic matter (DOM) determined by high pressure size exclusion chromatography (HPSEC) using measurements made with different columns and various generations of polystyrenesulfonate (PSS) molecular weight standards. Molecular weight measurements made with a newer generation HPSEC column and PSS standards from more recent lots are roughly 200 to 400 Da lower than initial measurements made in the early 1990s. These updated numbers match DOM molecular weights measured by colligative methods and fall within a range of values calculated from hydroxyl radical kinetics. These changes suggest improved accuracy of HPSEC molecular weight measurements that we attribute to improved accuracy of PSS standards and changes in the column packing. We also isolated DOM from wetlands in the Prairie Pothole Region (PPR) using XAD-8, a cation exchange resin, and PPL, a styrene-divinylbenzene media, and observed little difference in molecular weight and specific UV absorbance at 280 nm (SUVA280) between the two solid phase extraction resins, suggesting they capture similar DOM moieties. PPR DOM also showed lower SUVA280 at similar weights compared to DOM isolates from a global range of environments, which we attribute to oxidized sulfur in PPR DOM that would increase molecular weight without affecting SUVA280.

Singlet Oxygen Phosphorescence as a Probe for Triplet-State Dissolved Organic Matter Reactivity.

Triplet-state chromophoric dissolved organic matter (3CDOM*) plays an important role in aquatic photochemistry, yet much remains unknown about the reactivity of these intermediates. To better understand the kinetic behavior and reactivity of 3CDOM*, we have developed an indirect observation method based on monitoring time-resolved singlet oxygen (1O2) phosphorescence kinetics. The underpinning principle of our approach relies on the fact that O2 quenches almost all triplets with near diffusion limited rate constants, resulting in the formation of 1O2, which is kinetically linked to the precursors. A kinetic model relating 1O2 phosphorescence kinetics to triplet excited states produced from isolated humic substances and in whole natural-water samples (hereafter referred to as 3CDOM*) was developed and used to determine rate constants governing 3CDOM* natural lifetimes and quenching by oxygen and 2,4,6-trimethylphenol (TMP), a common triplet probe molecule. 3CDOM* was found to exhibit smaller O2 and TMP quenching rate constants, ∼9 × 108 and ∼8 × 108 M-1 s-1, respectively, compared with model sensitizers, such as aromatic ketones. Findings from this report shed light on the fundamental photochemical properties of CDOM in organic matter isolates and whole waters and will help refine photochemical models to more accurately predict pollutant fate in the environment.

Reactivity of Triplet Excited States of Dissolved Natural Organic Matter in Stormflow from Mixed-Use Watersheds.

Dissolved organic matter (DOM) quantity and composition control the rate of formation (Rf,T) of triplet excited states of dissolved natural organic matter (3DOM*) and the efficiency of 3DOM* formation (the apparent quantum yield, AQYT). Here, the reactivity of 3DOM* in stormflow samples collected from watersheds with variable land covers is examined. Stormflow DOM reflects variability in DOM quantity and composition as a function of land cover and may be important in controlling the fate of cotransported pollutants. Rf,T and AQYT were measured using 2,4,6-trimethylphenol in stormflow samples under simulated sunlight. The DOM source and composition was characterized using absorbance and fluorescence spectroscopies and high-resolution mass spectrometry. Rf,T and the total rate of light absorption by the water samples (Ra) increased with the dissolved organic carbon (DOC) concentration. AQYT was independent of DOC concentration, but varied with DOM source: developed land cover (4-6%) ≈ open water > vegetated land cover (3%). AQYT was positively related to an index for microbial/algal DOM content and negatively related to DOM molecular weight, DOM aromaticity, and the content of polyphenols. This work demonstrates that TMP is an effective probe for the determination of Rf,T and AQYT in whole water samples after accounting for the inhibition of TMP photodegradation by DOM.

Photochemical Transformation of Four Ionic Liquid Cation Structures in Aqueous Solution.

Ionic liquids (ILs) are a new class of solvents expected to be used increasingly by the chemical industry in the coming years. Given their slow biodegradation and limited sorption affinities, IL cations have a high potential to reach aquatic environments. We investigated the fate of ILs in sunlit surface water by determining direct and indirect photochemical transformation rates of imidazolium, pyridinium, pyrrolidinium, and piperidinium cations. The photodegradation of all investigated IL cations was faster in solutions containing dissolved organic matter (DOM) than in ultrapure water, illustrating the importance of indirect photochemical processes. Experiments with model sensitizers and DOM isolates revealed that reactions with hydroxyl radicals dominated the transformation of tested IL cations. Bimolecular reaction rate constants with hydroxyl radicals ranged from (2.04 ± 0.37) × 109 to (8.47 ± 0.97) × 109 M-1 s-1 and showed an increase in rate constants with increasing carbon side-chain length. Consequently, average estimated half-lives of IL cations in sunlit surface water ranged from 32 ± 4 to 135 ± 25 days, highlighting the potential of IL cations to become persistent aquatic contaminants.