Efficient Synthesis of Imine-Carboxylic Acid Functionalized Compounds: Single Crystal, Hirshfeld Surface and Quantum Chemical Exploration.

Two aminobenzoic acid based crystalline imines (HMBA and DHBA) were synthesized through a condensation reaction of 4-aminobenzoic acid and substituted benzaldehydes. Single-crystal X-ray diffraction was employed for the determination of structures of prepared Schiff bases. The stability of super molecular structures of both molecules was achieved by intramolecular H-bonding accompanied by strong, as well as comparatively weak, intermolecular attractive forces. The comparative analysis of the non-covalent forces in HMBA and DHBA was performed by Hirshfeld surface analysis and an interaction energy study between the molecular pairs. Along with the synthesis, quantum chemical calculations were also accomplished at M06/6-311G (d, p) functional of density functional theory (DFT). The frontier molecular orbitals (FMOs), molecular electrostatic potential (MEP), natural bond orbitals (NBOs), global reactivity parameters (GRPs) and natural population (NPA) analyses were also carried out. The findings of FMOs found that Egap for HMBA was examined to be smaller (3.477 eV) than that of DHBA (3.7933 eV), which indicated a greater charge transference rate in HMBA. Further, the NBO analysis showed the efficient intramolecular charge transfer (ICT), as studied by Hirshfeld surface analysis.

Designing a Beryllium-Free Deep-Ultraviolet Nonlinear Optical Material without a Structural Instability Problem.

A beryllium-free deep-ultraviolet (deep-UV) nonlinear optical (NLO) material K3Ba3Li2Al4B6O20F is developed mainly by the element substitution of Be for Al and Li from Sr2Be2B2O7 that was considered as one of the most promising deep-UV NLO materials. K3Ba3Li2Al4B6O20F preserves the structural merits of Sr2Be2B2O7 and thus exhibits no layering growth tendency and possesses the optical properties required for deep-UV NLO applications, including deep-UV transparency, phase-matchability, and sufficiently large second-harmonic generation (1.5 × KH2PO4). Furthermore, it overcomes the structural instability problem of Sr2Be2B2O7, which is confirmed by the obtainment of large single crystals and phonon dispersion calculations. These attributes make it very attractive for next-generation deep-UV NLO materials. The substitution of Be for Al and Li in beryllium borates provides a new opportunity to design beryllium-free deep-UV NLO materials with good performance.

Bistable N-H···N hydrogen bonds for reversibly modulating the dynamic motion in an organic co-crystal.

Bistable N-H···N hydrogen bonds between rotors and stators enable delicate modulation of dynamic molecular motion by slowing down the fast rotation in a N-H···N hydrogen-bonded organic co-crystal of 1,2-diazabicyclo(2.2.2)octane bis(thiourea), which has been elucidated by the combination of variable-temperature (VT) X-ray structure analyses and VT solid-state nuclear magnetic resonance techniques.

A Photoferroelectric Perovskite-Type Organometallic Halide with Exceptional Anisotropy of Bulk Photovoltaic Effects.

Perovskite-type ferroelectrics composed of organometallic halides are emerging as a promising alternative to conventional photovoltaic devices because of their unique photovoltaic effects (PVEs). A new layered perovskite-type photoferroelectric, bis(cyclohexylaminium) tetrabromo lead (1), is presented. The material exhibits an exceptional anisotropy of bulk PVEs. Upon photoexcitation, superior photovoltaic behaviors are created along its inorganic layers, which are composed of corner-sharing PbBr6 octahedra. Semiconducting activity with remarkable photoconductivity is achieved in the vertical direction, showing sizeable on/off current ratios (>10(4) ), which compete with the most active photovoltaic material CH3 NH3 PbI3 . In 1 the temperature-dependence of photovoltage coincides fairly well with that of polarization, confirming the dominant role of ferroelectricity in such highly anisotropic PVEs. This finding sheds light on bulk PVEs in ferroelectric materials, and promotes their application in optoelectronic devices.

Beryllium-free Rb3Al3B3O10F with reinforced interlayer bonding as a deep-ultraviolet nonlinear optical crystal.

A new beryllium-free borate Rb3Al3B3O10F has been synthesized and characterized by single-crystal X-ray diffraction. It features a framework structure consisting of alveolate [Al3(BO3)3OF]∞ layers tightly bound via Al-O and Al-F bridged bonds, with the in-layer [BO3](3-) groups in nearly coplanar and aligned arrangement. This compound is transparent down to 200 nm and is phase-matchable with a powder second-harmonic generation efficiency of 1.2 times that of KH2PO4. Remarkably, it exhibits a strong interlayer bonding which is about one order larger than that of the benchmark KBe2BO3F2, thus no layering tendency was observed during the crystal growth. In addition, it is nonhygroscopic and thermally stable up to ∼1462 K. These attributes make Rb3Al3B3O10F a promising nonlinear optical crystal in the deep-ultraviolet region. First-principles calculations, combined with the anionic group theory, were adopted to rationalize the optical properties.

Synthesis, Characterizations, Hirshfeld Surface Analysis, DFT, and NLO Study of a Schiff Base Derived from Trifluoromethyl Amine.

We synthesized an imine-based (Schiff base) crystalline organic chromophore, i.e., (E)-2-ethoxy-6-(((3-(trifluoromethyl)phenyl)imino)methyl)phenol (ETPMP), and explored its nonlinear optical (NLO) properties. The crystalline structure of ETPMP was determined by the XRD technique and equated with the associated structures utilizing a Cambridge Structural Database search. The supramolecular assembly of ETPMP was investigated regarding intermolecular interactions and short contacts by Hirshfeld surface analysis. Void analysis was performed to check the mechanical response of the crystal. Supramolecular assembly was further inspected by interaction energy calculations that were performed with the B3LYP/6-31G(d,p) functional. Besides this, the NLO properties of ETPMP and other already reported crystal TFMOS were explored utilizing the M06/6-31G(d,p) functional of the DFT approach. An excellent agreement was observed between XRD and DFT results of geometric parameters of the above-mentioned crystals. Narrow band gap along with bathochromic shift (3.489 eV and 317.225 nm, respectively) were investigated in TFMOS than that of ETPMP. Owing to these unique properties, TFMOS possesses higher linear (⟨a⟩ = 3.835 × 10-23 esu) and nonlinear (γtot. = 1.346 × 10-34 esu) response as compared to ETPMP. The outcomes explicitly show the higher nonlinearity in TFMOS, highlighting its importance in potential NLO applications.

Quantum Chemical Exploration of A-π1-D1-π2-D2-Type Compounds for the Exploration of Chemical Reactivity, Optoelectronic, and Third-order Nonlinear Optical Properties.

Organic compounds exhibit significant nonlinear optical (NLO) properties and can be utilized in various areas like optical parameters, fiber optics, and optical communication. Herein, a series of chromophores (DBTD1-DBTD6) with an A-π1-D1-π2-D2 framework was derived from a prepared compound (DBTR) by varying the structure of π-spacer and terminal acceptor. The DBTR and its investigated compounds were optimized at the M06/6-311G(d,p) level of theory. Frontier molecular orbitals (FMOs), nonlinear optical (NLO) properties, global reactivity parameters (GRPs), natural bonding orbital (NBO), transition density matrix (TDM), molecular electrostatic potential (MEP), and natural population analysis (NPA) were accomplished at the abovementioned level to describe the NLO findings. DBTD6 has the lowermost band gap (2.131 eV) among all of the derived compounds. The decreasing order of highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy gap values was DBTR > DBTD1 > DBTD2 > DBTD3 > DBTD4 > DBTD5 > DBTD6. The NBO analysis was carried out to describe noncovalent interactions such as conjugative interactions and electron delocalization. From all of the examined substances, DBTD5 showed the highest λmax value at 593.425 nm (in the gaseous phase) and 630.578 nm (in chloroform solvent). Moreover, the ßtot and ⟨γ⟩ amplitudes of DBTD5 were noticed to be relatively greater at 1.140 × 10-27 and 1.331 × 10-32 esu, respectively. So, these outcomes disclosed that DBTD5 depicted the highest linear and nonlinear properties in comparison to the other designed compounds, which underlines that it could make a significant contribution to hi-tech NLO devices.

Influence of azacycle donor moieties on the photovoltaic properties of benzo[c][1,2,5]thiadiazole based organic systems: a DFT study.

Fullerene free organic chromophores are widely utilized to improve the efficacy of photovoltaic materials. Herein, we designed D-π-A-π-D form chromophores (TAZD1-TAZD5) via end-capped redistribution of donor moieties by keeping the same π-bridge and central acceptor unit for organic solar cells (OSCs). To analyze the photovoltaic characteristics of these derivatives, DFT estimations were accomplished at B3LYP/6-311 G (d,p) functional. Different investigations like frontier molecular orbital (FMO), absorption spectra (UV-Vis), density of states (DOS), binding energy (Eb), open circuit voltage (Voc), and transition density matrix (TDMs) were performed to examine the optical, photophysical and electronic characteristics of afore-mentioned chromophores. A suitable band gap (∆E = 2.723-2.659 eV) with larger bathochromic shift (λmax = 554.218-543.261 nm in acetonitrile) was seen in TAZD1-TAZD5. An effective charge transference from donor to acceptor via spacer was observed by FMO analysis which further supported by DOS and TDM. Further, lower binding energy values also supported the higher exciton dissociation and greater CT in TAZD1-TAZD5. Among all the designed chromophores, TAZD5 exhibited the narrowest Egap (2.659 eV) and maximum red-shifted absorption in solvent as well as gas phase i.e. 554.218 nm and 533.219 nm, respectively which perhaps as a result of the phenothiazine-based donor group (MPT). In a nutshell, all the tailored chromophores can be considered as efficient compounds for promising OSCs with a good Voc response, interestingly, TAZD5 is found to be excellent chromophores as compared to all these designed compounds.

Designing of banana shaped chromophores via molecular engineering of terminal groups to probe photovoltaic behavior of organic solar cell materials.

To meet the rising requirement of photovoltaic compounds for modernized hi-tech purpose, we designed six new molecules (DTPD1-DTPD6) from banana shaped small fullerene free chromophore (DTPR) by structural tailoring at terminal acceptors. Frontier molecular orbitals (FMOs), density of states (DOS), open circuit voltage (Voc), transition density matrix (TDM) analysis, optical properties, reorganization energy value of hole and electron were determined utilizing density function theory (DFT) and time-dependent density function theory (TD-DFT) approaches, to analyze photovoltaic properties of said compounds. Band gap contraction (∆E = 2.717-2.167 eV) accompanied by larger bathochromic shift (λmax = 585.490-709.693 nm) was observed in derivatives contrary to DTPR. The FMOs, DOS and TDMs investigations explored that central acceptor moiety played significant role for charge transformation. The minimum binding energy values for DTPD1-DTPD6 demonstrated the higher exciton dissociation rate with greater charge transferal rate than DTPR, which was further endorsed by TDM and DOS analyses. A comparable Voc (1.49-2.535 V) with respect to the HOMOPBDBT-LUMOacceptor for entitled compounds was investigated. In a nutshell, all the tailored chromophores can be considered as highly efficient compounds for promising OSCs with a good Voc response.

Design, Synthesis, and Density Functional Theory Studies of Indole Hydrazones as Colorimetric "Naked Eye" Sensors for F Ions.

A new series of sensors SM-1 to SM-3 was designed and synthesized using indole carboxaldehydes (2a-2c) and 2,4-dinitrophenyl hydrazine. Accompanied by the synthesis, density functional theory investigation was also accomplished at the M06-2X/6-311G+(d,p) functional. A reduction in band gap (ΔE = 4.702-4.230 eV) along with a bathochromic shift (λmax = 433.223-471.584 nm) was seen in deprotonated chromophores than their neutral sensors. Further, significant charge transference from indole toward dinitrophenyl hydrazine was also examined. Global reactivity parameters also expressed the greater stability of sensors than that of their deprotonated form. SM-3 displayed high selectivity toward F ions as compared to SM-1 and SM-2, which respond to both F- and CN- ions. The electronic absorption spectrum was recorded in CH3CN. The sensor SM-3 showed high selectivity toward F- ions with a low detection limit (8.69 × 10-8), and the binding constant for SM-3 was determined as 7.7 × 105. The sensor displayed naked eye views as the color of solution changed from mustard to purple with a red shift of 96 nm. The mechanism suggests deprotonation from the NH group, which was confirmed by 1H NMR. The sensor is found to be useful for detection of F- ions in the real sample and for analytical application (test strip).

Efficient Synthesis, Spectroscopic Characterization, and Nonlinear Optical Properties of Novel Salicylaldehyde-Based Thiosemicarbazones: Experimental and Theoretical Studies.

Currently, we reported the synthesis of six novel salicylaldehyde-based thiosemicarbazones (BHCT1-HBCT6) via condensation of salicylaldehyde with respective thiosemicarbazide. Through various spectroscopic methods, UV-visible and NMR, the chemical structures of BHCT1-HBCT6 compounds were determined. Along with synthesis, a computational study was also performed at the M06/6-31G(d,p) functional. Various analyses such as natural bond orbital (NBO) analysis, natural population analysis, frontier molecular orbital (FMO) analysis, and molecular electrostatic potential surfaces were carried out to understand the nonlinear optical (NLO) characteristics of the synthesized compounds. Additionally, a comparative study was carried out between DFT and experimental results (UV-vis study), and a good agreement was observed in the results. The energy gap calculated through FMOs was found to be in decreasing order as 4.505 (FHCT2) > 4.499 (HBCT6) > 4.497 (BHCT1) = 4.497(HMCT5) > 4.386 (CHCT3) > 4.241(AHCT4) in eV. The global reactivity parameters (GRPs) were attained through E HOMO and E LUMO, which described the stability and hardness of novel compounds. The NBO approach confirmed the charge delocalization and stability of the molecules. Among all the investigated compounds, a larger value (557.085 a.u.) of first hyperpolarizability (ßtot) was possessed by CHCT3. The NLO response (ßtot) of BHCT1-HBCT6 was found to be 9.145, 9.33, 13.33, 5.43, 5.68, and 10.13 a.u. times larger than that of the standard para-nitroaniline molecule. These findings ascertained the potential of entitled ligands as best NLO materials for a variety of applications in modern technology.

Synthesis, characterization and exploration of photovoltaic behavior of hydrazide based scaffolds: a concise experimental and DFT study.

Solar energy being a non-depleting energy resource, has attracted scientists' attention to develop efficient solar cells to meet energy demands. Herein, a series of hydrazinylthiazole-4-carbohydrazide organic photovoltaic compounds (BDTC1-BDTC7) with an A1-D1-A2-D2 framework was synthesized with 48-62% yields, and their spectroscopic characterization was accomplished using FT-IR, HRMS, 1H and 13C-NMR techniques. Density functional theory (DFT) and time dependent DFT analyses were performed utilizing the M06/6-31G(d,p) functional to calculate the photovoltaic and optoelectronic properties of BDTC1-BDTC7via numerous simulations of the frontier molecular orbitals (FMOs), transition density matrix (TDM), open circuit voltage (V oc) and density of states (DOS). Moreover, the conducted analysis on the FMOs revealed efficient transference of charge from the highest occupied to the lowest unoccupied molecular orbitals (HOMO → LUMO), further supported by TDM and DOS analyses. Furthermore, the values of binding energy (E b = 0.295 to 1.150 eV), as well as reorganization energy of the holes (-0.038-0.025 eV) and electrons (-0.023-0.00 eV), were found to be smaller for all the studied compounds, which suggests a higher exciton dissociation rate with greater hole mobility in BDTC1-BDTC7. V oc analysis was accomplished with respect to HOMOPBDB-T-LUMOACCEPTOR. Among all the synthesized molecules, BDTC7 was found to have a reduced band gap (3.583 eV), with a bathochromic shift and absorption maximum at 448.990 nm, and a promising V oc (1.97 V), thus it is regarded as a potential candidate for high performance photovoltaic applications.

Promising impact of push-pull configuration into designed octacyclic naphthalene-based organic scaffolds for nonlinear optical amplitudes: a quantum chemical approach.

In opto-electronics, non-fullerene (NF) derivatives are regarded as efficient non-linear optical (NLO) materials. The present investigation was based on designing NF naphthalene-based derivatives (PCMD1-D9) with D-π-A configuration from PCMR. DFT analysis at M06/6-311G (d,p) level was accomplished to explore the photonic behavior of PCMD1-D9 compounds. Various kind of analysis like; UV-Vis, density of state (DOS), natural bond orbitals (NBOs), transition density matrix (TDM) and frontier molecular orbitals (FMOs) analyses were accomplished to understand the NLO properties of said chromophores. The configuration change led to considerable charge distribution over highest occupied and lowest unoccupied molecular orbitals with minimum band difference. The energy gap trend for all the entitled compounds was observed as; PCMD8 < PCMD5 = PCMD9 < PCMD6 < PCMD7 < PCMD4 < PCMD3 < PCMD2 < PCMD1 with the least band gap of 2.048 eV in PCMD8 among all the compounds. The UV-Visible spectrum of the entitled chromophores manifested high values of λmax in derivatives contrary to PCMR. Additionally, NBO findings explored effective intramolecular charge transfer and maximum energy of stabilization (34.31 kcal/mol) for PCMD8 chromophore. The highest linear polarizability (<α>) and dipole moment (µtot) values were exhibited by PCMD5 at 2.712 × 10-22. and 1.995 × 10-17 esu, respectively. PCMD8 push-pull configured molecular entity exhibited highest first hyper-polarizability (ßtot) at 4.747 × 10-27 esu and second hyper-polarizability at 6.867 × 10-32 esu. Overall, all the formulated chromophores exhibited significant NLO results contrary to PCMR. Hence, through this structural tailoring via various acceptors, effective NLO materials were obtained for optoelectronic applications.

Theoretical Perspective toward Designing of 5-Methylbenzo [1,2-b:3,4-b':6,5-b″] trithiophene-Based Nonlinear Optical Compounds with Extended Acceptors.

A series of benzotrithiophene-based compounds (DCTM1-DCTM6) having D1-π1-D2-π2-A configuration were designed using a reference molecule (DCTMR) via incorporating pyrrole rings (n = 1-5) as the π-spacer (π2). Quantum chemical calculations were performed to determine the impact of the pyrrole ring on the nonlinear optical (NLO) behavior of the above-mentioned chromophores. The optoelectronic properties of the compounds were determined at the MW1PW91/6-311G(d,p) functional. Among all of the derivatives, DCTM5 exhibited the least highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) band gap (Eg) 0.968 eV with a high softness of 0.562 eV-1, and hence possessed the highest polarizability. Interestingly, transition density matrix (TDM) findings demonstrated that DCTM5 with an effective diagonal charge transmission proportion at the acceptor group supports the frontier molecular orbital (FMO) results. Additionally, the exciton binding energy values for DCTM1-DCTM6 were found to be less than that for DCTMR and thus, the effective charge transfer was examined in the derivatives. All of the derivatives exhibited effective NLO outcomes with the highest magnitude of linear polarizability ⟨α⟩, and first (ßtot) and second (γtot) hyperpolarizabilities relative to the parent compound. Nevertheless, the highest ßtot and γtot were obtained for DTCM1 and DTCM6, 7.0440 × 10-27 and 22.260 × 10-34 esu, respectively. Hence, through this structural tailoring with a pyrrole spacer, effective NLO materials can be obtained for optoelectronic applications.

Synthesis of Fluorinated Hydrazinylthiazole Derivatives: A Virtual and Experimental Approach to Diabetes Management.

A novel series of fluorophenyl-based thiazoles was synthesized following the Hanztsch method. All of the compounds were initially verified with physical parameters (color, melting point, retardation factor (R f)), which were further confirmed by several spectroscopic methods, including ultraviolet-visible (UV-visible), Fourier-transform infrared (FTIR), 1H, 13C, 19F NMR, and high-resolution mass spectrometry (HRMS). The binding interactions of all compounds were studied using a molecular docking simulation approach. Furthermore, each compound was evaluated for its alpha(α)-amylase, antiglycation, and antioxidant potentials. The biocompatibility of all compounds was checked with an in vitro hemolytic assay. All synthesized scaffolds were found biocompatible with minimal lysis of human erythrocytes as compared to the standard Triton X-100. Among the tested compounds, the analogue 3h (IC50 = 5.14 ± 0.03 µM) was found to be a highly potent candidate against α-amylase as compared to the standard (acarbose, IC50 = 5.55 ± 0.06 µM). The compounds 3d, 3f, 3i, and 3k exhibited excellent antiglycation inhibition potential with their IC50 values far less than the standard amino guanidine (IC50 = 0.403 ± 0.001 mg/mL). The antidiabetic potential was further supported by docking studies. Docking studies revealed that all synthesized compounds exhibited various interactions along enzyme active sites (pi-pi, H-bonding, van der Waals) with varied binding energies.

Facile Synthesis and DFT Analysis of Novel Thiazole-Based Hydrazones: An Experimental and Theoretical Perspective.

Hydrazone compounds with remarkable nonlinear optical (NLO) properties were found with vast applications due to their cost-effective synthesis and greater stability. Therefore, we synthesized hydrazone scaffolds (TCAH1-TCAH8) by condensation reaction, and their structural confirmation was accomplished with spectroscopic methods (1H-, 13C-NMR, and HRMS). Quantum chemical calculations were also performed at B3PW91/6-311G(d,p) functional of DFT to explore electronic, structural, and chemical properties. To understand the NLO responses of afore-said chromophores, various kinds of analyses such as natural bonding orbitals (NBOs), frontier molecular orbitals (FMOs), UV-vis analysis, and density of states (DOS) were performed. Findings showed that the HOMO-LUMO energy gap in TCAH8 (3.595 eV) was found to be lower than the TCAH1-TCAH7 (4.123-3.932 eV) with a large red shift which leads to a substantial NLO response. Furthermore, strong intramolecular interactions showed the highest stabilization energy (24.1 kcal mol-1) for TCAH8 in the NBO transitions, combined with the least binding energy. The significant NLO response of TCAH4 was explored with ⟨α⟩, ßtot, and ⟨γ⟩ values as 5.157 × 10-23, and 2.185 × 10-29, and 2.753 × 10-34 esu, respectively, among the entitled compounds. The recent findings may inspire scientists to develop extremely effective NLO materials for forthcoming hi-tech applications.

Synthesis of novel 3-hydroxy-2-naphthoic hydrazones as selective chemosensors for cyanide ions.

The development of an effective and selective chemosensor for CN- ions has become the need of the hour due to their hazardous impact on the environment and humans. Herein, we report the synthesis of two novel chemosensors, IF-1 and IF-2 based on 3-hydroxy-2-naphthohydrazide and aldehyde derivatives that have shown selective sensing of CN- ions. IF-2 exhibited exclusive binding with CN- ions that is further confirmed by the binding constant value of 4.77 × 104 M-1 with a low detection limit (8.2 µM). The chemosensory potential is attributed to deprotonation of the labile Schiff base center by CN- ions that results in a color change from colorless to yellow as visible by the naked eye. Accompanying this, a DFT study was also performed in order to find the interaction between the sensor (IF-1) and its ions (F-). A notable charge transfer from 3-hydroxy-2-naphthamide to 2,4-di-tert-butyl-6-methylphenol, was indicated by the FMO analysis. The QTAIM analysis revealed that in the complex compound, the strongest pure hydrogen-hydrogen bonding was observed between H53 and H58, indicated by a ρ value of +0.017807. Due to its selective response, IF-2 can be successfully used for making test strips for the detection of CN- ions.

Novel Fluorinated Biphenyl Compounds Synthesized via Pd(0)-Catalyzed Reactions: Experimental and Computational Studies.

Five new difluorinated biphenyl compounds, 4'-(tert-butyl)-3,4-difluoro-1,1'-biphenyl (TBDFBP), 1-(3',4'-difluoro-[1,1'-biphenyl]-4-yl)ethanone (DFBPE), 3',4'-difluoro-2,5-dimethoxy-1,1'-biphenyl (DFDMBP), 3,4-difluoro-3'-nitro-1,1'-biphenyl (DFNBP), and (3',4'-difluoro-[1,1'-biphenyl]-3-yl)(methyl)sulfane (DFBPMS), have been successfully synthesized by the well-known Suzuki-Miyaura coupling with excellent yields averaging 78%. UV-visible, Fourier transform infrared ,and 13C NMR and 1H NMR spectroscopies along with single-crystal X-ray diffraction (SC-XRD) analysis (for TBDFBP and DFBPE) were used for the structure elucidation of the synthesized compounds. The SC-XRD results demonstrated the crystal systems of the studied compounds, TBDFBP and DFBPE, to be monoclinic, and their space groups were found to be P21/c. Also, a detailed density functional theory study was performed. The calculated structures for TBDFBP and DFBPE were found to agree quite well with the experimental results. The natural bonding orbital charge analysis suggested that molecules of these compounds should interact quite noticeably with each other in the solid phase and with polar solvent molecules. Molecular electrostatic potential analysis suggests that accumulation of positive and negative potential implies possibility of quite significant dipole-dipole intermolecular interactions in crystals of these compounds, as well as quite strong interactions with polar solvent molecules. The global reactivity parameters analysis suggests all compounds to be quite stable in redox reactions, with the compound DFNBP being relatively more reactive and the compounds TBDFBP and DFDMBP being relatively more stable.

Influence of End-Capped Modifications in the Nonlinear Optical Amplitude of Nonfullerene-Based Chromophores with a D-π-A Architecture: A DFT/TDDFT Study.

Nonlinear optical (NLO) materials have several uses in many fields such as solid physics, biology, medicine, nuclear physics, and material research. Therefore, a series of nonfullerene-based derivatives (CC10D1-CC10D8) with a D-π-A configuration was planned for the NLO investigation using CC10R as the reference molecule with structural alternations at acceptor moieties. Natural bonding orbital (NBO), UV-vis spectra, frontier molecular orbitals (FMOs), global reactivity parameters (GRPs), transition density matrix (TDM), and density of states (DOS) were analyzed using the M06/6-311G(d,p) functional in chloroform solvent to understand the NLO responses of CC10R and CC10D1-CC10D8. The highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) band gaps of CC10D1-CC10D6 were illustrated to be lower than that of CC10R, with the larger bathochromic shift (726.408-782.674 nm) resulting in a significant NLO response. Along with the band gap, the FMO method also identified an efficient interfacial charge transfer from D to A moieties via a π-bridge, which was further supported by the DOS and TDM map. Moreover, NBO calculations demonstrated that extended hyperconjugation and strong internal molecular interactions were important in their stabilization. The dipole moment (µ), linear polarizability ⟨α⟩, hyperpolarizability (ßtotal), and second-order hyperpolarizability (γtotal.) were studied for CC10R and CC10D1-CC10D8. Among all of the derivatives, CC10D2 was proven to be the most appropriate candidate because of its suitable NLO behavior such as being well-supported by a reduced band gap (2.093 eV) and having a suitable maximum absorption wavelength (782.674 nm). Therefore, CC10D2 was reported to have a greater value of first hyperpolarizability (208 659.330 a.u.) compared with other derivatives and CC10R. For the second hyperpolarizability, a greater value was obtained for CC10R (5.855 × 107 a.u.), and its derivatives showed results comparable to that of the parent chromophore for γtotal. This theoretical framework reveals that structural customization with different acceptor units plays a significant role in obtaining attractive NLO materials for optoelectronic applications.

First theoretical framework for highly efficient photovoltaic parameters by structural modification with benzothiophene-incorporated acceptors in dithiophene based chromophores.

Now a days, researchers are constantly doing efforts to upgrade the performance of solar based devices with the aim of increasing the role of photovoltaic materials in modern hi-tech optoelectronic applications. Realizing the recent energy conditions across the globe, research is diverted from fullerene to non-fullerene electron acceptor moieties in this era, considering their remarkable contribution in organic solar cells (OSCs). Therefore, we designed seven novel non-fullerene fused ring electron acceptor chromophores (MD2-MD8) from DOC2C6-2F by structural tailoring with different acceptors at end-capped units. DFT study was performed at B3LYP functional to discover the opto-electronic characteristics of the newly tailored chromophores. Various analysis such as frontier molecular orbitals (FMOs), transition density matrix (TDM), density of states (DOS), binding energy (Eb), reorganization energy, open circuit voltage (Voc) was carried out to comprehend the photovoltaic response of MD2-MD8. Decrease in band gaps (1.940-1.571 eV) with wider absorption spectrum (725.690-939.844 nm in chloroform) along with greater charge transfer rate from HOMO towards LUMO were examined in derivatives as compared to MR1 (Egap = 1.976 eV, λmax = 738.221 nm) except MD7. Further, in all derivatives, smaller values of Eb (0.252-0.279 eV) were examined than that of reference (0.296 eV). These lower binding energy values of MD2-MD8 indicated the higher rate of excitation dissociation with lager charger transfer rate than MR1, which further supported by DOS and TDM analyses. Additionally, least reorganization energy in the aforesaid compounds for hole with electron was also inspected. Moreover, Voc a good photovoltaic response was noted for all studied compounds which indicated that these compounds are suitable to synthesize OSCs in future.