Investigation on the physico-chemical properties of soil and mineralization of three selected tropical tree leaf litter.

Plant leaf litter has a major role in the structure and function of soil ecosystems as it is associated with nutrient release and cycling. The present study is aimed to understand how well the decomposing leaf litter kept soil organic carbon and nitrogen levels stable during an incubation experiment that was carried out in a lab setting under controlled conditions and the results were compared to those from a natural plantation. In natural site soil samples, Anacardium. occidentale showed a higher value of organic carbon at surface (1.14%) and subsurface (0.93%) and Azadirachta. indica exhibited a higher value of total nitrogen at surface (0.28%) and subsurface sample (0.14%). In the incubation experiment, Acacia auriculiformis had the highest organic carbon content initially (5.26%), whereas A. occidentale had the highest nitrogen level on 30th day (0.67%). The overall carbon-nitrogen ratio showed a varied tendency, which may be due to dynamic changes in the complex decomposition cycle. The higher rate of mass loss and decay was observed in A. indica leaf litter, the range of the decay constant is 1.26-2.22. The morphological and chemical changes of soil sample and the vermicast were substantained using scanning electron microscopy (SEM) and Fourier transmission infrared spectroscopy (FT-IR).

Performance of aerobic denitrifying fungal community for promoting nitrogen reduction and its application in drinking water reservoirs.

The effect of mix-cultured aerobic denitrifying microorganisms on the water remediation has been extensively explored, but little is known about the performance of mix-cultured low efficiency fungi on denitrification. In this study, two kinds of aerobic denitrifying fungi (Trichoderma afroharzianum H1 and Aspergillus niger C1) were isolated from reservoirs, improved the capacity by mix-cultured. The results showed a difference between northern and southern reservoirs, the dominants of genera were Cystobasidium and Acremonium. The removals of total nitrogen (TN) was 12.00%, 7.53% and 69.33% in Trichoderma afroharzianum H1, Aspergillus niger C1 and mix-cultured (C1 and H1) under the denitrification medium. The contents of ATP and electron transport system activity in mix-cultured amendment were increased by 42.54% and 67.52%, 1.72 and 2.91 times, respectively. Besides, the raw water experiment indicated that TN removals were 24.05%, 12.66% and 73.42% in Trichoderma afroharzianum H1, Aspergillus niger C1 and mix-cultured. The removals of dissolved organic carbon in mix-cultured were increased 35.02% and 50.46% compared to Trichoderma afroharzianum H1 and Aspergillus niger C1. Therefore, mix-cultured of two low efficiency aerobic denitrifying fungi has been considered as a novelty perspective for mitigation of drinking water source.

Enhanced thermophilic high-solids anaerobic digestion of organic fraction of municipal solid waste with spatial separation from conductive materials in a single reactor volume.

Despite benefits such as lower water and working volume requirements, thermophilic high solids anaerobic digestion (THSAD) often fails due to the rapid build-up of volatile fatty acids (VFAs) and the associated drop in pH. Use of conductive materials (CM) can promote THSAD through stimulation of direct interspecies electron transfer (DIET), while the need for their constant dosing due to poor separation from effluent impairs economic feasibility. This study used an approach of spatially separating magnetite and granular activated carbon (GAC) from the organic fraction of municipal solid waste (OFMSW) in a single reactor for THSAD. GAC and magnetite addition could both mitigate the severe inhibition of methanogenesis after VFAs build-up to ∼28-30 g/L, while negligible methane production was observed in the control group. The highest methane yield (286 mL CH4/g volatile solids (VS)) was achieved in magnetite-added reactors, while the highest maximum CH4 production rates (26.38 mL CH4/g VS/d) and lowest lag-phase (2.83 days) were obtained in GAC-added reactors. The enrichment of GAC and magnetite biofilms with various syntrophic and potentially electroactive microbial groups (Ruminiclostridium 1, Clostridia MBA03, Defluviitoga, Lentimicrobiaceae) in different relative abundances indicates the existence of specific preferences of these groups for the nature of CM. According to predicted basic metabolic functions, CM can enhance cellular processes and signals, lipid transport and metabolism, and methane metabolism, resulting in improved methane production. Rearrangement of metabolic pathways, formation of pili-like structures, enrichment of biofilms with electroactive groups and a significant improvement in THSAD performance was attributed to the enhancement of the DIET pathway. Promising results obtained in this work due to the spatial separation of the bulk OFMSW and CM can be useful for modeling larger-scale THSAD systems with better recovery of CM and cost-effectiveness.

Utilising standard samples instead of randomly collected food waste in composting: Implementation strategy and feasibility evaluation.

Randomly collected food waste results in inaccurate experimental data with poor reproducibility for composting. This study investigated standard food waste samples as replacements for randomly collected food waste. A response surface methodology was utilised to analyse data from a 28-day compost process optimisation experiment using collected food waste, and the optimal combination of composting parameters was derived. Experiments using different standard food waste samples (high oil and salt, high oil and sugar, balanced diet, and vegetarian) were conducted for 28 days under optimal conditions. The ranking of differences between the standard samples and collected food waste was vegetarian > balanced diet > high oil and sugar > high oil and salt. Statistical analysis indicated t-tests for increased oil and salt samples and collected food waste were not significant, and Cohen's d effect values were minimal. High oil and salt samples can be used as replacements for collected food waste in composting experiments.

The way forward to produce nutraceuticals from agri-food processing residues: obstacle, solution, and possibility.

Food matrices contain bioactive compounds that have health benefits beyond nutritional value. The bulk of bioactive chemicals are still present in agro-industrial by-products as food matrices. Throughout the food production chain, there is a lot of agro-industrial waste that, if not managed effectively, could harm the environment, company, and how nutritiously and adequately people eat. It's important to establish processes that maximise the use of agro-industrial by-products, such as biological technologies that improve the extraction and acquisition of bioactive compounds for the food and pharmaceutical industries. As opposed to nonbiological processes, biological procedures provide high-quality, bioactive extracts with minimum toxicity and environmental impact. Fermentation and enzymatic treatment are biological processes for obtaining bioactive compounds from agro-industrial waste. In this context, this article summarises the principal bioactive components in agro-industrial byproducts and the biological methods employed to extract them. In this review efficient utilization of bioactive compounds from agro-industrial waste more effectively in food and pharmaceutical industries has been described.

Bioactives from citrus food waste: types, extraction technologies and application.

The Citrus fruits belong to the category where the groups of fruits are recognized to be an admirable repository of bioactive elements and phytochemical constituents, with strong biological potentials. The prominent use of Citrus fruits for nutrition as well as food processing has led to the release of a large amount of waste into the environment and surrounding, and it simultaneously burdens the nature and existence of many organisms including the human population. In order to rectify such consequences, the reuse of food waste from citrus for various advantageous effects. In this regard, the first part of the article primarily focussed on the various strategies available for the extraction of chemical elements from citrus waste and the remaining strand of the article focussed on the various bioactive compounds with special reference to their pharmacological as well as the medicinal benefits and future prospects.

Microbial production of nutraceuticals: Metabolic engineering interventions in phenolic compounds, poly unsaturated fatty acids and carotenoids synthesis.

Nutraceuticals have attained substantial attention due to their health-boosting or disease-prevention characteristics. Growing awareness about the potential of nutraceuticals for the prevention and management of diseases affecting human has led to an increase in the market value of nutraceuticals in several billion dollars. Nevertheless, limitations in supply and isolation complications from plants, animals or fungi, limit the large-scale production of nutraceuticals. Microbial engineering at metabolic level has been proved as an environment friendly substitute for the chemical synthesis of nutraceuticals. Extensively used microbial systems such as E. coli and S. cerevisiae have been modified as versatile cell factories for the synthesis of diverse nutraceuticals. This review describes current interventions in metabolic engineering for synthesising some of the therapeutically important nutraceuticals (phenolic compounds, polyunsaturated fatty acids and carotenoids). We focus on the interventions in enhancing product yield through engineering at gene level or pathway level.

A critical review on valorization of food processing wastes and by-products for pullulan production.

Pullulan is a commercially available exopolymer biosynthesized by Aureobasidium pullulans supplemented with nitrogen, carbon and other vital components through submerged and solid-state fermentation. These nutrients are very expensive and it raises the cost for the production of pullulan. Hence, the need of alternative cost-effective raw materials for its production is a prerequisite. Owing to its unique physicochemical features, pullulan has various applications in the food, pharmacological, and biomedical domains. Food industrial wastes generate a considerable number of by-products which accumulates and has a negative influence on the environment. These by-products are made up of proteins, carbohydrates, and other components, can be employed as substrates for the production of pullulan. The present review briefs on the pullulan production using food processing waste and by-products and the elements that impact it. It provides an insight into versatile applications of pullulan in food industries. Various challenges and future prospects in the field of research on pullulan production have been uncovered.

Heavy metal pollution in a black shale post-mining site of southern China: Pollution pattern, source apportionment and health risk assessment.

Source apportionment is critical but remains largely unknown for heavy metals in the soil surrounding black shale mining areas. Herein, the distribution, potential hazards, and sources of heavy metals in the soil around a black shale post-mining site were investigated. The content of Cadmium (Cd) in topsoil samples (0.77-50.29 mg/kg, N = 84) all exceeded the Chinese agricultural soil standard (0.3 mg/kg). The majority of Cd in the soil existed in the mobile fraction posing a high potential risk to the local ecosystem. and Zn and V in soils existed in the residual form. The percentages of HQing > 1 and 0.6-1 for Vanadium (V) in soil were 8.3% and 31.0%, respectively, and the percentages of HQing > 0.5 for Cd in soil were 3.7% showed that V and Cd were the main factors that increased the potential non-cancer risk. Five potential sources were identified using the geostatistical and positive matrix factorization (PMF) model, among which Cd was mainly derived from the short-term weathering process of black shale (81.06%), most Zinc (Zn) was from the long-term weathering of black shale (67.35%), whereas V was contributed by many factors including long-term weathering of black shale (42.99%), traffic emissions (31.12%) and agricultural activities (21.05%). This study reveals the potential risk and identifies the sources of heavy metals, which is helpful to manage the contaminated soil in black shale mining areas.

Green route for recycling of low-cost waste resources for the biosynthesis of nanoparticles (NPs) and nanomaterials (NMs)-A review.

Nowadays, nanoparticles (NPs) and nanomaterials (NMs) are used extensively in various streams such as medical science, solar energy, drug delivery, water treatment, and detection of persistent pollutants. Intensive synthesis of NPs/NMs carried out via physico-chemical technologies is deteriorating the environment globally. Therefore, an urgent need to adopt cost-effective and green technologies to synthesize NPs/NMs by recycling of secondary waste resources is highly required. Environmental wastes such as metallurgical slag, electronics (e-waste), and acid mine drainage (AMD) are rich sources of metals to produce NPs. This concept can remediate the environment on the one hand and the other hand, it can provide a future roadmap for economic benefits at industrial scale operations. The waste-derived NPs will reduce the industrial consumption of limited primary resources. In this review article, green emerging technologies involving lignocellulosic waste to synthesize the NPs from the waste streams and the role of potential microorganisms such as microalgae, fungi, yeast, bacteria for the synthesis of NPs have been discussed. A critical insight is also given on use of recycling technologies and the incorporation of NMs in the membrane bioreactors (MBRs) to improve membrane functioning and process performance. Finally, this study aims to mitigate various persisting scientific and technological challenges for the safe disposal and recycling of organic and inorganic waste for future use in the circular economy.

Bioremediation of Endocrine Disrupting Chemicals- Advancements and Challenges.

Endocrine Disrupting Chemicals (EDCs), major group of recalcitrant compounds, poses a serious threat to the health and future of millions of human beings, and other flora and fauna for years to come. A close analysis of various xenobiotics undermines the fact that EDC is structurally diverse chemical compounds generated as a part of anthropogenic advancements as well as part of their degradation. Regardless of such structural diversity, EDC is common in their ultimate drastic effect of impeding the proper functioning of the endocrinal system, basic physiologic systems, resulting in deregulated growth, malformations, and cancerous outcomes in animals as well as humans. The current review outlines an overview of various EDCs, their toxic effects on the ecosystem and its inhabitants. Conventional remediation methods such as physico-chemical methods and enzymatic approaches have been put into action as some form of mitigation measures. However, the last decade has seen the hunt for newer technologies and methodologies at an accelerated pace. Genetically engineered microbial degradation, gene editing strategies, metabolic and protein engineering, and in-silico predictive approaches - modern day's additions to our armamentarium in combating the EDCs are addressed. These additions have greater acceptance socially with lesser dissonance owing to reduced toxic by-products, lower health trepidations, better degradation, and ultimately the prevention of bioaccumulation. The positive impact of such new approaches on controlling the menace of EDCs has been outlaid. This review will shed light on sources of EDCs, their impact, significance, and the different remediation and bioremediation approaches, with a special emphasis on the recent trends and perspectives in using sustainable approaches for bioremediation of EDCs. Strict regulations to prevent the release of estrogenic chemicals to the ecosystem, adoption of combinatorial methods to remove EDC and prevalent use of bioremediation techniques should be followed in all future endeavors to combat EDC pollution. Moreover, the proper development, growth and functioning of future living forms relies on their non-exposure to EDCs, thus remediation of such chemicals present even in nano-concentrations should be addressed gravely.

Synthetic organic antibiotics residues as emerging contaminants waste-to-resources processing for a circular economy in China: Challenges and perspective.

Synthetic antibiotics have been known for years to combat bacterial antibiotics. But their overuse and resistance have become a concern recently. The antibiotics reach the environment, including soil from the manufacturing process and undigested excretion by cattle and humans. It leads to overburden and contamination of the environment. These organic antibiotics remain in the environment for a very long period. During this period, antibiotics come in contact with various flora and fauna. The ill manufacturing practices and inadequate wastewater treatment cause a severe problem to the water bodies. After pretreatment from pharmaceutical industries, the effluents are released to the water bodies such as rivers. Even after pretreatment, effluents contain a significant number of antibiotic residues, which affect the living organisms living in the water bodies. Ultimately, river contaminated water reaches the ocean, spreading the contamination to a vast environment. This review paper discusses the impact of synthetic organic contamination on the environment and its hazardous effect on health. In addition, it analyzes and suggests the biotechnological strategies to tackle organic antibiotic residue proliferation. Moreover, the degradation of organic antibiotic residues by biocatalyst and biochar is analyzed. The circular economy approach for waste-to-resource technology for organic antibiotic residue in China is analyzed for a sustainable solution. Overall, the significant challenges related to synthetic antibiotic residues and future aspects are analyzed in this review paper.

Multi-omics approaches for remediation of bisphenol A: Toxicity, risk analysis, road blocks and research perspectives.

In this "plastic era" with the increased use of plastic in day today's life the accumulation of its degraded products like microplastics or plastic additives such as Bisphenol A(BPA) is also increasing. BPA is an endocrine-disrupting chemical used as a plasticizing agent in clear plastic, building materials, coatings, and epoxy resin. Several enzymes including laccases and lipases have been studied for the reduction of BPA toxicity. Over the decades of encountering these toxicants, microorganisms have evolved to degrade different classes of plastic additives. Since the degradation of BPA is a long process thus meta-omics approaches have been employed to identify the active microbiota and microbial dynamics involved in the mitigation of BPA. It is also necessary to investigate the impact of processing activities on transit of BPA in food items and to limit its entrance in food world. This review summarizes a comprehensive overview on BPA sources, toxicity, bio-based mitigation approaches along with a deeper understanding of multi-omics approaches for its reduction and risk analysis. Knowledge gaps and opportunities have been comprehensively compiled that would aid the state-of-the-art information in the available literature for the researchers to further address this issue.

Bioactive metabolites in functional and fermented foods and their role as immunity booster and anti-viral innate mechanisms.

Live microorganisms in the fermented foods termed probiotics and their secondary metabolites with bioactive potential were considered as potential anti-viral capabilities through various mechanisms. Given the importance of functional and fermented foods in disease prevention, there is a need to discuss the contextualization and deep understanding of the mechanism of action of these foods, particularly considering the appearance of coronavirus (COVID-19) pandemic, which is causing health concerns and increased social services globally. The mechanism of probiotic strains or their bioactive metabolites is due to stimulation of immune response through boosting T-lymphocytes, cytokines, and cell toxicity of natural killer cells. Proper consumption of these functional and fermented foods may provide additional antiviral approaches for public benefit by modulating the immune functions in the hosts. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-022-05528-8.

Customized yeast cell factories for biopharmaceuticals: from cell engineering to process scale up.

The manufacture of recombinant therapeutics is a fastest-developing section of therapeutic pharmaceuticals and presently plays a significant role in disease management. Yeasts are established eukaryotic host for heterologous protein production and offer distinctive benefits in synthesising pharmaceutical recombinants. Yeasts are proficient of vigorous growth on inexpensive media, easy for gene manipulations, and are capable of adding post translational changes of eukaryotes. Saccharomyces cerevisiae is model yeast that has been applied as a main host for the manufacture of pharmaceuticals and is the major tool box for genetic studies; nevertheless, numerous other yeasts comprising Pichia pastoris, Kluyveromyces lactis, Hansenula polymorpha, and Yarrowia lipolytica have attained huge attention as non-conventional partners intended for the industrial manufacture of heterologous proteins. Here we review the advances in yeast gene manipulation tools and techniques for heterologous pharmaceutical protein synthesis. Application of secretory pathway engineering, glycosylation engineering strategies and fermentation scale-up strategies in customizing yeast cells for the synthesis of therapeutic proteins has been meticulously described.

Emerging prospects of macro- and microalgae as prebiotic.

Macro- and microalgae-based foods are becoming popular due to their high nutritious value. The algal biomass is enriched with polysaccharides, protein, polyunsaturated fatty acids, carotenoids, vitamins and minerals. However, the most promising fraction is polysaccharides (PS) or their derivatives (as dietary fibers) which are not entirely fermented by colonic bacteria hence act as potential prebiotic. Primarily, algae become famous as prominent protein sources. Recently, these are widely adopted as functional food (e.g., desserts, dairy products, oil-derivatives, pastas etc.) or animal feed (for poultry, cattle, fish etc.). Besides prebiotic and balanced amino acids source, algae derived compounds implied as therapeutics due to comprising bioactive properties to elicit immunomodulatory, antioxidative, anticancerous, anticoagulant, hepato-protective, and antihypertensive responses. Despite the above potentials, broader research determinations are inevitable to explore these algal compounds until microalgae become a business reality for broader and specific applications in all health domains. However, scale up of algal bioprocess remains a major challenge until commercial affordability is accomplished which can be possible by discovering their hidden potentials and increasing their value and application prospects. This review provides an overview of the significance of algae consumption for several health benefits in humans and animals mainly as prebiotics, however their functional food and animal feed potential are briefly covered. Moreover, their potential to develop an algal-based food industry to meet the people's requirements not only as a sustainable food solution with several health benefits but also as therapeutics is inevitable.

Study of heat and mass transport on the instability of a swirling viscoelastic liquid film.

In this article, we examine the response of transport of mass and heat at the viscous gas-viscoelastic liquid interface, while the instability of the interface is defined by capillary instability. The fluids are enclosed in an annular region bounded by two rigid cylinders. The Oldroyd B-type viscoelastic fluid is considered and the outer cylinder is swirling with a uniform angular velocity. The governing mathematical equations are work out through the viscoelastic-viscous potential flow theory. The well-known normal mode procedure is utilized and a critical value of wave-number is calculated to determine the stability/instability norm for the interface. Various plots showing the effect of swirling, heat/mass transfer, etc. have been made and illustrated physically. The addition of swirl prevents the development of disturbance waves. We achieve that the transport of mass/heat at the interface reduces the amplitudes of perturbations.

Time-course transcriptome analysis reveals the mechanisms of Burkholderia sp. adaptation to high phenol concentrations.

Microbial tolerance to phenolic pollutants is the key to their efficient biodegradation. However, the metabolic mechanisms that allow some microorganisms to adapt to high phenol concentrations remain unclear. In this study, to reveal the underlying mechanisms of how Burkholderia sp. adapt to high phenol concentrations, the strain's tolerance ability and time-course transcriptome in combination with cell phenotype were evaluated. Surprisingly, Burkholderia sp. still grew normally after a long adaptation to a relatively high phenol concentration (1500 mg/L) and exhibited some time-dependent changes compared to unstressed cells prior to the phenol addition. Time-course transcriptome analysis results revealed that the mechanism of adaptations to phenol was an evolutionary process that transitioned from tolerance to positive degradation through precise gene regulation at appropriate times. Specifically, basal stress gene expression was upregulated and contributed to phenol tolerance, which involved stress, DNA repair, membrane, efflux pump and antioxidant protein-coding genes, while a phenol degradation gene cluster was specifically induced. Interestingly, both the catechol and protocatechuate branches of the ß-ketoadipate pathway contributed to the early stage of phenol degradation, but only the catechol branch was used in the late stage. In addition, pathways involving flagella, chemotaxis, ATP-binding cassette transporters and two-component systems were positively associated with strain survival under phenolic stress. This study provides the first insights into the specific response of Burkholderia sp. to high phenol stress and shows potential for application in remediation of polluted environments. KEY POINTS: • Shock, DNA repair and antioxidant-related genes contributed to phenol tolerance. • ß-Ketoadipate pathway branches differed at different stages of phenol degradation. • Adaptation mechanisms transitioned from negative tolerance to positive degradation.

Effects of black soldier fly larvae (Diptera: Stratiomyidae) on food waste and sewage sludge composting.

With the rapid development of the economy and population, the improvement of life level, enormous organic wastes have been generated. Black soldier fly larvae (BSFL) treatment is an attractive management method as it provides a strategy for waste treatment while also generate biofertilizers. The aim of this study was to evaluate the BSFL processing residue quality through the physical and chemical parameters. The sewage sludge (T1) and food waste (T2) were employed with BSFL (7:1.2 ration on fresh weight basis) and without BSFL T3 and T4 was marked control and composted for 9 days. The results showed that the BSFL composting reduced the organic matter by 14.51-21.98% and the accumulation of volatile fatty acids by 10.12-28.50%. While BSFL composting greatly increased total kjeldahl nitrogen by 23.15% compared with T4, T1 remained essentially unchanged. The additive of BSFL was significantly increased the total phosphorous and potassium in T2, but T1 remained stable compared with control. These results showed that the BSFL could improve the quality of end product and promote the food waste degradation. The current study indicates that the BSFL management provides an environmentally relevant alternative with very convenience in food waste. Further research should focus on residue sanitation.

Mulching practices alter soil microbial functional diversity and benefit to soil quality in orchards on the Loess Plateau.

To improve our understanding about the responses of microbial functional diversity to different mulching practices, this study used a metagenomic approach to reveal soil microbial functional specificity under four tillage regimes: conventional tillage (CT), organic mulch practices with ryegrass (Lolium perenne L.) intercropping cover (RE) and cornstalk mulch (CS), and inorganic mulching with black ground fabric (BF) in a 7-year field experiment in an apple orchard of the Loess Plateau in China. Enzyme activity and soil physicochemical properties were measured. A redundancy analysis showed that the RE and CS treatments had positive effects on soil nutrient and enzyme activity compared to that of the BF and CT treatments. The CS and RE treatments increased ß-glucosidase, cellobiohydrolase, and ß-xylosidase activities. In addition, the CS treatment significantly enhanced the ß-N-acetylglucosaminidase and urease activities compared to that under CT treatment. However, the activity of these enzyme was reduced in the BF treatment compared with that of the CT treatment. The results also indicated that the enzymes activities were not completely consistent with the changing trends of the genes encoding these enzymes. In addition, the RE and CS treatments also increased the abundance of genes encoding carbohydrate enzymes. It is interesting that the RE and CS treatments had more pathway genes associated with the carbon cycle, nitrogen cycle, and amino acid metabolism compared with the BF treatment. Remarkably, RE and CS treatments effectively increased the abundance of carbon fixation gene cbbL compared to CT treatment. In summary, organic mulching practices increased the soil microbiological functional diversity related to the carbon and nitrogen cycle, while inorganic mulching practice reduced them. This study enhanced our understanding of how mulching practices may alter soil microbial functional diversity and benefit soil quality.