Dual Drugs Anticancer Nanoformulation using Graphene Oxide-PEG as Nanocarrier for Protocatechuic Acid and Chlorogenic Acid.

BACKGROUND: The chemotherapy of cancer has been complicated by poor bioavailability, adverse side effects, high dose requirement, drug resistance and low therapeutic indices. Cancer cells have different ways to inhibit the chemotherapeutic drugs, use of dual/multiple anticancer agents may be achieve better therapeutic effects in particular for drug resistant tumors. Designing a biocompatible delivery system, dual or multiple drugs could addressing these chemotherapy drawbacks and it is the focus of many current biomedical research. METHODS: In the present study, graphene oxide-polyethylene glycol (GOPEG) nanocarrier is designed and loaded with two anticancer drugs; Protocatechuic acid (PCA) and Chlorogenic acid (CA). The designed anticancer nanocomposite was further coated with folic acid to target the cancer cells, as their surface membranes are overexpressed with folate receptors. RESULTS: The particle size distribution of the designed nanocomposite was found to be narrow, 9-40 nm. The release profiles of the loaded drugs; PCA and CA was conducted in human body simulated PBS solutions of pH 7.4 (blood pH) and pH 4.8 (intracellular lysosomal pH). Anticancer properties were evaluated against cancerous cells i.e. liver cancer, HEPG2 and human colon cancer, HT-29 cells. The cytocompatbility was assessed on normal 3T3 fibroblasts cells. CONCLUSION: The size of the final designed anticancer nanocomposite formulation, GOPEG-PCACA-FA was found to be distributed at 9-40 nm with a median of 8 nm. The in vitro release of the drugs PCA and CA was found to be of sustained manner which took more than 100 h for the release. Furthermore, the designed formulation was biocompatible with normal 3T3 cells and showed strong anticancer activity against liver and colon cancer cells.

Quantum Chemical Exploration of A-π1-D1-π2-D2-Type Compounds for the Exploration of Chemical Reactivity, Optoelectronic, and Third-order Nonlinear Optical Properties.

Organic compounds exhibit significant nonlinear optical (NLO) properties and can be utilized in various areas like optical parameters, fiber optics, and optical communication. Herein, a series of chromophores (DBTD1-DBTD6) with an A-π1-D1-π2-D2 framework was derived from a prepared compound (DBTR) by varying the structure of π-spacer and terminal acceptor. The DBTR and its investigated compounds were optimized at the M06/6-311G(d,p) level of theory. Frontier molecular orbitals (FMOs), nonlinear optical (NLO) properties, global reactivity parameters (GRPs), natural bonding orbital (NBO), transition density matrix (TDM), molecular electrostatic potential (MEP), and natural population analysis (NPA) were accomplished at the abovementioned level to describe the NLO findings. DBTD6 has the lowermost band gap (2.131 eV) among all of the derived compounds. The decreasing order of highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy gap values was DBTR > DBTD1 > DBTD2 > DBTD3 > DBTD4 > DBTD5 > DBTD6. The NBO analysis was carried out to describe noncovalent interactions such as conjugative interactions and electron delocalization. From all of the examined substances, DBTD5 showed the highest λmax value at 593.425 nm (in the gaseous phase) and 630.578 nm (in chloroform solvent). Moreover, the ßtot and ⟨γ⟩ amplitudes of DBTD5 were noticed to be relatively greater at 1.140 × 10-27 and 1.331 × 10-32 esu, respectively. So, these outcomes disclosed that DBTD5 depicted the highest linear and nonlinear properties in comparison to the other designed compounds, which underlines that it could make a significant contribution to hi-tech NLO devices.

Influence of azacycle donor moieties on the photovoltaic properties of benzo[c][1,2,5]thiadiazole based organic systems: a DFT study.

Fullerene free organic chromophores are widely utilized to improve the efficacy of photovoltaic materials. Herein, we designed D-π-A-π-D form chromophores (TAZD1-TAZD5) via end-capped redistribution of donor moieties by keeping the same π-bridge and central acceptor unit for organic solar cells (OSCs). To analyze the photovoltaic characteristics of these derivatives, DFT estimations were accomplished at B3LYP/6-311 G (d,p) functional. Different investigations like frontier molecular orbital (FMO), absorption spectra (UV-Vis), density of states (DOS), binding energy (Eb), open circuit voltage (Voc), and transition density matrix (TDMs) were performed to examine the optical, photophysical and electronic characteristics of afore-mentioned chromophores. A suitable band gap (∆E = 2.723-2.659 eV) with larger bathochromic shift (λmax = 554.218-543.261 nm in acetonitrile) was seen in TAZD1-TAZD5. An effective charge transference from donor to acceptor via spacer was observed by FMO analysis which further supported by DOS and TDM. Further, lower binding energy values also supported the higher exciton dissociation and greater CT in TAZD1-TAZD5. Among all the designed chromophores, TAZD5 exhibited the narrowest Egap (2.659 eV) and maximum red-shifted absorption in solvent as well as gas phase i.e. 554.218 nm and 533.219 nm, respectively which perhaps as a result of the phenothiazine-based donor group (MPT). In a nutshell, all the tailored chromophores can be considered as efficient compounds for promising OSCs with a good Voc response, interestingly, TAZD5 is found to be excellent chromophores as compared to all these designed compounds.

Efficient Synthesis, Spectroscopic Characterization, and Nonlinear Optical Properties of Novel Salicylaldehyde-Based Thiosemicarbazones: Experimental and Theoretical Studies.

Currently, we reported the synthesis of six novel salicylaldehyde-based thiosemicarbazones (BHCT1-HBCT6) via condensation of salicylaldehyde with respective thiosemicarbazide. Through various spectroscopic methods, UV-visible and NMR, the chemical structures of BHCT1-HBCT6 compounds were determined. Along with synthesis, a computational study was also performed at the M06/6-31G(d,p) functional. Various analyses such as natural bond orbital (NBO) analysis, natural population analysis, frontier molecular orbital (FMO) analysis, and molecular electrostatic potential surfaces were carried out to understand the nonlinear optical (NLO) characteristics of the synthesized compounds. Additionally, a comparative study was carried out between DFT and experimental results (UV-vis study), and a good agreement was observed in the results. The energy gap calculated through FMOs was found to be in decreasing order as 4.505 (FHCT2) > 4.499 (HBCT6) > 4.497 (BHCT1) = 4.497(HMCT5) > 4.386 (CHCT3) > 4.241(AHCT4) in eV. The global reactivity parameters (GRPs) were attained through E HOMO and E LUMO, which described the stability and hardness of novel compounds. The NBO approach confirmed the charge delocalization and stability of the molecules. Among all the investigated compounds, a larger value (557.085 a.u.) of first hyperpolarizability (ßtot) was possessed by CHCT3. The NLO response (ßtot) of BHCT1-HBCT6 was found to be 9.145, 9.33, 13.33, 5.43, 5.68, and 10.13 a.u. times larger than that of the standard para-nitroaniline molecule. These findings ascertained the potential of entitled ligands as best NLO materials for a variety of applications in modern technology.

Synthesis, characterization and exploration of photovoltaic behavior of hydrazide based scaffolds: a concise experimental and DFT study.

Solar energy being a non-depleting energy resource, has attracted scientists' attention to develop efficient solar cells to meet energy demands. Herein, a series of hydrazinylthiazole-4-carbohydrazide organic photovoltaic compounds (BDTC1-BDTC7) with an A1-D1-A2-D2 framework was synthesized with 48-62% yields, and their spectroscopic characterization was accomplished using FT-IR, HRMS, 1H and 13C-NMR techniques. Density functional theory (DFT) and time dependent DFT analyses were performed utilizing the M06/6-31G(d,p) functional to calculate the photovoltaic and optoelectronic properties of BDTC1-BDTC7via numerous simulations of the frontier molecular orbitals (FMOs), transition density matrix (TDM), open circuit voltage (V oc) and density of states (DOS). Moreover, the conducted analysis on the FMOs revealed efficient transference of charge from the highest occupied to the lowest unoccupied molecular orbitals (HOMO → LUMO), further supported by TDM and DOS analyses. Furthermore, the values of binding energy (E b = 0.295 to 1.150 eV), as well as reorganization energy of the holes (-0.038-0.025 eV) and electrons (-0.023-0.00 eV), were found to be smaller for all the studied compounds, which suggests a higher exciton dissociation rate with greater hole mobility in BDTC1-BDTC7. V oc analysis was accomplished with respect to HOMOPBDB-T-LUMOACCEPTOR. Among all the synthesized molecules, BDTC7 was found to have a reduced band gap (3.583 eV), with a bathochromic shift and absorption maximum at 448.990 nm, and a promising V oc (1.97 V), thus it is regarded as a potential candidate for high performance photovoltaic applications.

Theoretical Perspective toward Designing of 5-Methylbenzo [1,2-b:3,4-b':6,5-b″] trithiophene-Based Nonlinear Optical Compounds with Extended Acceptors.

A series of benzotrithiophene-based compounds (DCTM1-DCTM6) having D1-π1-D2-π2-A configuration were designed using a reference molecule (DCTMR) via incorporating pyrrole rings (n = 1-5) as the π-spacer (π2). Quantum chemical calculations were performed to determine the impact of the pyrrole ring on the nonlinear optical (NLO) behavior of the above-mentioned chromophores. The optoelectronic properties of the compounds were determined at the MW1PW91/6-311G(d,p) functional. Among all of the derivatives, DCTM5 exhibited the least highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) band gap (Eg) 0.968 eV with a high softness of 0.562 eV-1, and hence possessed the highest polarizability. Interestingly, transition density matrix (TDM) findings demonstrated that DCTM5 with an effective diagonal charge transmission proportion at the acceptor group supports the frontier molecular orbital (FMO) results. Additionally, the exciton binding energy values for DCTM1-DCTM6 were found to be less than that for DCTMR and thus, the effective charge transfer was examined in the derivatives. All of the derivatives exhibited effective NLO outcomes with the highest magnitude of linear polarizability ⟨α⟩, and first (ßtot) and second (γtot) hyperpolarizabilities relative to the parent compound. Nevertheless, the highest ßtot and γtot were obtained for DTCM1 and DTCM6, 7.0440 × 10-27 and 22.260 × 10-34 esu, respectively. Hence, through this structural tailoring with a pyrrole spacer, effective NLO materials can be obtained for optoelectronic applications.

Synthesis of Fluorinated Hydrazinylthiazole Derivatives: A Virtual and Experimental Approach to Diabetes Management.

A novel series of fluorophenyl-based thiazoles was synthesized following the Hanztsch method. All of the compounds were initially verified with physical parameters (color, melting point, retardation factor (R f)), which were further confirmed by several spectroscopic methods, including ultraviolet-visible (UV-visible), Fourier-transform infrared (FTIR), 1H, 13C, 19F NMR, and high-resolution mass spectrometry (HRMS). The binding interactions of all compounds were studied using a molecular docking simulation approach. Furthermore, each compound was evaluated for its alpha(α)-amylase, antiglycation, and antioxidant potentials. The biocompatibility of all compounds was checked with an in vitro hemolytic assay. All synthesized scaffolds were found biocompatible with minimal lysis of human erythrocytes as compared to the standard Triton X-100. Among the tested compounds, the analogue 3h (IC50 = 5.14 ± 0.03 µM) was found to be a highly potent candidate against α-amylase as compared to the standard (acarbose, IC50 = 5.55 ± 0.06 µM). The compounds 3d, 3f, 3i, and 3k exhibited excellent antiglycation inhibition potential with their IC50 values far less than the standard amino guanidine (IC50 = 0.403 ± 0.001 mg/mL). The antidiabetic potential was further supported by docking studies. Docking studies revealed that all synthesized compounds exhibited various interactions along enzyme active sites (pi-pi, H-bonding, van der Waals) with varied binding energies.

Novel Fluorinated Biphenyl Compounds Synthesized via Pd(0)-Catalyzed Reactions: Experimental and Computational Studies.

Five new difluorinated biphenyl compounds, 4'-(tert-butyl)-3,4-difluoro-1,1'-biphenyl (TBDFBP), 1-(3',4'-difluoro-[1,1'-biphenyl]-4-yl)ethanone (DFBPE), 3',4'-difluoro-2,5-dimethoxy-1,1'-biphenyl (DFDMBP), 3,4-difluoro-3'-nitro-1,1'-biphenyl (DFNBP), and (3',4'-difluoro-[1,1'-biphenyl]-3-yl)(methyl)sulfane (DFBPMS), have been successfully synthesized by the well-known Suzuki-Miyaura coupling with excellent yields averaging 78%. UV-visible, Fourier transform infrared ,and 13C NMR and 1H NMR spectroscopies along with single-crystal X-ray diffraction (SC-XRD) analysis (for TBDFBP and DFBPE) were used for the structure elucidation of the synthesized compounds. The SC-XRD results demonstrated the crystal systems of the studied compounds, TBDFBP and DFBPE, to be monoclinic, and their space groups were found to be P21/c. Also, a detailed density functional theory study was performed. The calculated structures for TBDFBP and DFBPE were found to agree quite well with the experimental results. The natural bonding orbital charge analysis suggested that molecules of these compounds should interact quite noticeably with each other in the solid phase and with polar solvent molecules. Molecular electrostatic potential analysis suggests that accumulation of positive and negative potential implies possibility of quite significant dipole-dipole intermolecular interactions in crystals of these compounds, as well as quite strong interactions with polar solvent molecules. The global reactivity parameters analysis suggests all compounds to be quite stable in redox reactions, with the compound DFNBP being relatively more reactive and the compounds TBDFBP and DFDMBP being relatively more stable.

Nanomaterials for the Treatment of Heavy Metal Contaminated Water.

Nanotechnology finds its application almost in every field of science and technology. At the same time, it also helps to find the solution to various environment-related problems, especially water contamination. Nanomaterials have many advantages over conventional materials, such as high surface area, both polar and non-polar chemistries, controlled and size-tunable, easier biodegradation, which made them ideal candidates for water and environmental remediation as well. Herein, applications of non-carbon nanomaterials, such as layered double hydroxides, iron oxide magnetite nanoparticles, nano-polymer composites, metal oxide nanomaterials and nanomembranes/fibers in heavy metal contaminated water and environmental remediation are reviewed. These non-carbon nanomaterials, due to their tunable unique chemistry and small size have greater potentials for water and environmental remediation applications.

Functionalized Activated Carbon Derived from Palm Kernel Shells for the Treatment of Simulated Heavy Metal-Contaminated Water.

Heavy metal contamination in water poses a great risk to human health as well as to the lives of other creatures. Activated carbon is a useful material to be applied for the treatment of heavy metal-contaminated water. In this study, functionalized activated carbon (FAC) was produced by the induction of nitro groups onto activated carbon using nitric acid. The resulting material was characterized in detail using the XRD, Raman, BET, FTIR, and FESEM techniques. The FAC was used for the treatment of heavy metal-contaminated water using different adsorption parameters, i.e., solution pH, contact time, adsorbent dosage and heavy metal ion concentrations, and these parameters were systematically optimized. It was found that FAC requires 90 min for the maximum adsorption of the heavy metal ions; Cr6+, Pb2+, Zn2+ and Cd2+. The kinetic study revealed that the metal ion adsorption follows the pseudo-second-order. The Freundlich and Langmuir isotherms were applied to determine the best fitting adsorption isotherm models. The adsorption capacities were also determined for each metal ion.

A Novel Para-Amino Salicylic Acid Magnesium Layered Hydroxide Nanocomposite Anti-Tuberculosis Drug Delivery System with Enhanced in vitro Therapeutic and Anti-Inflammatory Properties.

INTRODUCTION: Mycobacterium tuberculosis infections are associated with severe local inflammatory reactions, which may be life-threatening and lead to tuberculosis pathogenesis and associated complications. Inorganic nanolayers have been vastly exploited for biomedical applications (especially in drug delivery) because of their biocompatible and biodegradable nature with the ability to release a drug in a sustained manner. Herein, we report a new nanodelivery system of inorganic nanolayers based on magnesium layered hydroxides (MgLH) and a successfully intercalated anti-tuberculosis drug para-aminosalicylic acid (PAS). METHODS: The designed anti-tuberculosis nanodelivery composite, MgLH-PAS, was prepared by a novel co-precipitation method using MgNO3 as well MgO as starting materials. RESULTS: The designed nano-formulation, PAS-MgLH, showed good antimycobacterial and antimicrobial activities with significant synergistic anti-inflammatory effects on the suppression of lipopolysaccharide (LPS) stimulated inflammatory mediators in RAW 264.7 macrophages. The designed nano-formulation was also found to be biocompatible with human normal lung cells (MRC-5) and 3T3 fibroblast cells. Furthermore, the in vitro release of PAS from PAS-MgLH was found to be sustained in human body simulated phosphate buffer saline (PBS) solutions of pH 7.4 and pH 4.8. DISCUSSION: The results of the present study are highly encouraging for further in vivo studies. This new nanodelivery system, MgLH, can be exploited in the delivery of other drugs and in numerous other biomedical applications as well.

Ecofriendly Approach for Treatment of Heavy-Metal-Contaminated Water Using Activated Carbon of Kernel Shell of Oil Palm.

Heavy metal ion contamination in water poses a significant risk to human health as well as to the environment. Millions of tons of agricultural wastes are produced from oil palm plantations which are challenging to manage. In this study, we converted palm kernel shells (PKS) from a palm oil plantation into activated carbon (AC) having a surface area of 1099 m2/g using phosphoric acid as an activator. The prepared material was characterized using BET, XRD, Raman, FESEM and FTIR analyses. The AC was applied for the treatment of heavy-metal-contaminated water, and different parameters; the pH, adsorbent dosage, contact time and metal ion concentrations were varied to determine the optimal conditions for the metal ion adsorption. Different kinetic models; the zeroth, first-order and second-order, and Freundlich and Langmuir isotherm models were used to determine the mechanism of metal ion adsorption by the AC. Under the optimized conditions, Cr6+ and Pb2+ were removed completely, while Zn2+ and Cd2+ were more than 80% removed. This is a greener approach in which an agricultural waste, PKS is converted into a useful product, activated carbon and subsequently applied for the treatment of heavy metal-contaminated water.

Carbon Nanomaterials for the Treatment of Heavy Metal-Contaminated Water and Environmental Remediation.

Nanotechnology is an advanced field of science having the ability to solve the variety of environmental challenges by controlling the size and shape of the materials at a nanoscale. Carbon nanomaterials are unique because of their nontoxic nature, high surface area, easier biodegradation, and particularly useful environmental remediation. Heavy metal contamination in water is a major problem and poses a great risk to human health. Carbon nanomaterials are getting more and more attention due to their superior physicochemical properties that can be exploited for advanced treatment of heavy metal-contaminated water. Carbon nanomaterials namely carbon nanotubes, fullerenes, graphene, graphene oxide, and activated carbon have great potential for removal of heavy metals from water because of their large surface area, nanoscale size, and availability of different functionalities and they are easier to be chemically modified and recycled. In this article, we have reviewed the recent advancements in the applications of these carbon nanomaterials in the treatment of heavy metal-contaminated water and have also highlighted their application in environmental remediation. Toxicological aspects of carbon-based nanomaterials have also been discussed.

Palm Kernel Shell as an effective adsorbent for the treatment of heavy metal contaminated water.

Heavy metal contamination in water causes severe adverse effects on human health. Millions of tons of kernel shell are produced as waste from oil palm plantation every year. In this study, palm oil kernel shell (PKS), an agricultural waste is utilized as effective adsorbent for the removal of heavy metals, namely; Cr6+, Pb2+, Cd2+ and Zn2+ from water. Different parameters of adsorptions; solution pH, adsorbent dosage, metal ions concentration and contact time were optimized. The PKS was found to be effective in the adsorption of heavy metal ions Cr6+, Pb2+, Cd2+ and Zn2+ from water with percentage removal of 98.92%, 99.01%, 84.23% and 83.45%, respectively. The adsorption capacities for Cr6+, Pb2+, Cd2+ and Zn2+ were found to be 49.65 mg/g, 43.12 mg/g, 49.62 mg/g and 41.72 mg/g respectively. Kinetics of adsorption process were determined for each metal ion using different kinetic models like the pseudo-first order, pseudo-second order and parabolic diffusion models. For each metal ion the pseudo-second order model fitted well with correlation coefficient, R2 = 0.999. Different isotherm models, namely Freundlich and Langmuir were applied for the determination of adsorption interaction between metal ions and PKS. Adsorption capacity was also determined for each of the metal ions. PKS was found to be very effective adsorbent for the treatment of heavy metal contaminated water and short time of two hours is required for maximum adsorption. This is a comprehensive study almost all the parameters of adsorptions were studied in detail. This is a cost effective and greener approach to utilize the agricultural waste without any chemical treatment, making it user friendly adsorbent.