RESUMEN
BACKGROUND: The long reads of the third-generation sequencing significantly benefit the quality of the de novo genome assembly. However, its relatively high single-base error rate has been criticized. Currently, sequencing accuracy and throughput continue to improve, and many advanced tools are constantly emerging. PacBio HiFi sequencing and Oxford Nanopore Technologies (ONT) PromethION are two up-to-date platforms with low error rates and ultralong high-throughput reads. Therefore, it is urgently needed to select the appropriate sequencing platforms, depths and genome assembly tools for high-quality genomes in the era of explosive data production. METHODS: We performed 455 (7 assemblers with 4 polishing pipelines or without polishing on 13 subsets with different depths) and 88 (4 assemblers with or without polishing on 11 subsets with different depths) de novo assemblies of Yeast S288C on high-coverage ONT and HiFi datasets, respectively. The assembly quality was evaluated by Quality Assessment Tool (QUAST), Benchmarking Universal Single-Copy Orthologs (BUSCO) and the newly proposed Comprehensive_score (C_score). In addition, we applied four preferable pipelines to assemble the genome of nonreference yeast strains. RESULTS: The assembler plays an essential role in genome construction, especially for low-depth datasets. For ONT datasets, Flye is superior to other tools through C_score evaluation. Polishing by Pilon and Medaka improve accuracy and continuity of the preassemblies, respectively, and their combination pipeline worked well in most quality metrics. For HiFi datasets, Flye and NextDenovo performed better than other tools, and polishing is also necessary. Enough data depth is required for high-quality genome construction by ONT (>80X) and HiFi (>20X) datasets.
Asunto(s)
Genoma Fúngico , Secuenciación de Nucleótidos de Alto Rendimiento , Saccharomyces cerevisiae , Genoma , Secuenciación de Nucleótidos de Alto Rendimiento/métodos , Saccharomyces cerevisiae/genética , Análisis de Secuencia de ADN/métodosRESUMEN
Effective utilization of glucose, xylose, and acetate, common carbon sources in lignocellulose hydrolysate, can boost biomanufacturing economics. However, carbon leaks into biomass biosynthesis pathways instead of the intended target product remain to be optimized. This study aimed to enhance α-carotene production by optimizing glucose, xylose, and acetate utilization in a high-efficiency Corynebacterium glutamicum cell factory. Heterologous xylose pathway expression in C. glutamicum resulted in strain m4, exhibiting a two-fold increase in α-carotene production from xylose compared to glucose. Xylose utilization was found to boost the biosynthesis of pyruvate and acetyl-CoA, essential precursors for carotenoid biosynthesis. Additionally, metabolic engineering including pck, pyc, ppc, and aceE deletion, completely disrupted the metabolic connection between glycolysis and the TCA cycle, further enhancing α-carotene production. This strategic intervention directed glucose and xylose primarily towards target chemical production, while acetate supplied essential metabolites for cell growth recovery. The engineered strain C. glutamicum m8 achieved 30 mg/g α-carotene, 67% higher than strain m4. In fed-batch fermentation, strain m8 produced 1802 mg/L of α-carotene, marking the highest titer reported to date in microbial fermentation. Moreover, it exhibited excellent performance in authentic lignocellulosic hydrolysate, producing 216 mg/L α-carotene, 1.45 times higher than the initial strain (m4). These labor-division strategies significantly contribute to the development of clean processes for producing various valuable chemicals from lignocellulosic resources.
Asunto(s)
Corynebacterium glutamicum , Ingeniería Metabólica , Corynebacterium glutamicum/metabolismo , Corynebacterium glutamicum/genética , Glucosa/metabolismo , Xilosa/metabolismo , Carotenoides/metabolismo , Carbono/metabolismo , Proteínas Bacterianas/genética , Proteínas Bacterianas/metabolismo , Proteínas Bacterianas/biosíntesisRESUMEN
Diversifying radiation of domain families within specific lineages of life indicates the importance of their functionality for the organisms. The foundation for the diversifying radiation of the cyclic di-GMP signalling network that occurred within the bacterial kingdom is most likely based in the outmost adaptability, flexibility and plasticity of the system. Integrative sensing of multiple diverse extra- and intracellular signals is made possible by the N-terminal sensory domains of the modular cyclic di-GMP turnover proteins, mutations in the protein scaffolds and subsequent signal reception by diverse receptors, which eventually rewires opposite host-associated as well as environmental life styles including parallel regulated target outputs. Natural, laboratory and microcosm derived microbial variants often with an altered multicellular biofilm behaviour as reading output demonstrated single amino acid substitutions to substantially alter catalytic activity including substrate specificity. Truncations and domain swapping of cyclic di-GMP signalling genes and horizontal gene transfer suggest rewiring of the network. Presence of cyclic di-GMP signalling genes on horizontally transferable elements in particular observed in extreme acidophilic bacteria indicates that cyclic di-GMP signalling and biofilm components are under selective pressure in these types of environments. On a short and long term evolutionary scale, within a species and in families within bacterial orders, respectively, the cyclic di-GMP signalling network can also rapidly disappear. To investigate variability of the cyclic di-GMP signalling system on various levels will give clues about evolutionary forces and discover novel physiological and metabolic pathways affected by this intriguing second messenger signalling system.
Asunto(s)
Sistemas de Mensajero Secundario , Transducción de Señal , Humanos , Sustitución de Aminoácidos , Biopelículas , Transferencia de Gen HorizontalRESUMEN
Zymomonas mobilis is an emerging chassis for being engineered to produce bulk products due to its unique glycolysis through the Entner-Doudoroff pathway with less ATP produced for lower biomass accumulation and higher product yield. When self-flocculated, the bacterial cells are more productive, since they can self-immobilize within bioreactors for high density, and are more tolerant to stresses for higher product titers, but this morphology needs to be controlled properly to avoid internal mass transfer limitation associated with their strong self-flocculation. Herewith we explored the regulation of cyclic diguanosine monophosphate (c-di-GMP) on self-flocculation of the bacterial cells through activating cellulose biosynthesis. While ZMO1365 and ZMO0919 with GGDEF domains for diguanylate cyclase activity catalyze c-di-GMP biosynthesis, ZMO1487 with an EAL domain for phosphodiesterase activity catalyzes c-di-GMP degradation, but ZMO1055 and ZMO0401 contain the dual domains with phosphodiesterase activity predominated. Since c-di-GMP is synthesized from GTP, the intracellular accumulation of this signal molecule through deactivating phosphodiesterase activity is preferred for activating cellulose biosynthesis to flocculate the bacterial cells, because such a strategy exerts less perturbance on intracellular processes regulated by GTP. These discoveries are significant for not only engineering unicellular Z. mobilis strains with the self-flocculating morphology to boost production but also understanding mechanism underlying c-di-GMP biosynthesis and degradation in the bacterium.
RESUMEN
Zymomonas mobilis metabolizes sugar anaerobically through the Entner-Doudoroff pathway with less ATP generated for lower biomass accumulation to direct more sugar for product formation with improved yield, making it a suitable host to be engineered as microbial cell factories for producing bulk commodities with major costs from feedstock consumption. Self-flocculation of the bacterial cells presents many advantages, such as enhanced tolerance to environmental stresses, a prerequisite for achieving high product titers by using concentrated substrates. ZM401, a self-flocculating mutant developed from ZM4, the unicellular model strain of Z. mobilis, was employed in this work to explore the molecular mechanism underlying this self-flocculating phenotype. Comparative studies between ZM401 and ZM4 indicate that a frameshift caused by a single nucleotide deletion in the poly-T tract of ZMO1082 fused the putative gene with the open reading frame of ZMO1083, encoding the catalytic subunit BcsA of the bacterial cellulose synthase to catalyze cellulose biosynthesis. Furthermore, the single nucleotide polymorphism mutation in the open reading frame of ZMO1055, encoding a bifunctional GGDEF-EAL protein with apparent diguanylate cyclase/phosphodiesterase activities, resulted in the Ala526Val substitution, which consequently compromised in vivo specific phosphodiesterase activity for the degradation of cyclic diguanylic acid, leading to intracellular accumulation of the signaling molecule to activate cellulose biosynthesis. These discoveries are significant for engineering other unicellular strains from Z. mobilis with the self-flocculating phenotype for robust production. IMPORTANCE Stress tolerance is a prerequisite for microbial cell factories to be robust in production, particularly for biorefinery of lignocellulosic biomass to produce biofuels, bioenergy, and bio-based chemicals for sustainable socioeconomic development, since various inhibitors are released during the pretreatment to destroy the recalcitrant lignin-carbohydrate complex for sugar production through enzymatic hydrolysis of the cellulose component, and their detoxification is too costly for producing bulk commodities. Although tolerance to individual stress has been intensively studied, the progress seems less significant since microbial cells are inevitably suffering from multiple stresses simultaneously under production conditions. When self-flocculating, microbial cells are more tolerant to multiple stresses through the general stress response due to enhanced quorum sensing associated with the morphological change for physiological and metabolic advantages. Therefore, elucidation of the molecular mechanism underlying such a self-flocculating phenotype is significant for engineering microbial cells with the unique multicellular morphology through rational design to boost their production performance.
Asunto(s)
Zymomonas , Celulosa/metabolismo , Floculación , Hidrolasas Diéster Fosfóricas/metabolismo , Azúcares/metabolismo , Zymomonas/genética , Zymomonas/metabolismoRESUMEN
During continuous very-high-gravity (VHG) ethanol fermentation with Saccharomyces cerevisiae, the process exhibits sustained oscillation in residual glucose, ethanol, and biomass, raising a question: how do yeast cells respond to this phenomenon? In this study, the oscillatory behavior of yeast cells was characterized through transcriptome and metabolome analysis for one complete oscillatory period. By analyzing the accumulation of 26 intracellular metabolites and the expression of 90 genes related to central carbon metabolism and stress response, we confirmed that the process oscillation was attributed to intracellular metabolic oscillation with phase difference, and the expression of HXK1, HXT1,2,4, and PFK1 was significantly different from other genes in the Embden-Meyerhof-Parnas pathway, indicating that glucose transport and phosphorylation could be key nodes for regulating the intracellular metabolism under oscillatory conditions. Moreover, the expression of stress response genes was triggered and affected predominately by ethanol inhibition in yeast cells. This progress not only contributes to the understanding of mechanisms underlying the process oscillation observed for continuous VHG ethanol fermentation, but also provides insights for understanding unsteady state that might develop in other continuous fermentation processes operated under VHG conditions to increase product titers for robust production.
Asunto(s)
Relojes Biológicos , Etanol/metabolismo , Regulación Fúngica de la Expresión Génica , Modelos Biológicos , Proteínas de Saccharomyces cerevisiae/biosíntesis , Saccharomyces cerevisiae/crecimiento & desarrollo , Metabolómica , Saccharomyces cerevisiae/genética , Proteínas de Saccharomyces cerevisiae/genéticaRESUMEN
BACKGROUND: Scenedesmus obliquus belongs to green microalgae and is widely used in aquaculture as feed, which is also explored for lipid production and bioremediation. However, genomic studies of this microalga have been very limited. Cell self-flocculation of microalgal cells can be used as a simple and economic method for harvesting biomass, and it is of great importance to perform genome-scale studies for the self-flocculating S. obliquus strains to promote their biotechnological applications. RESULTS: We employed the Pacific Biosciences sequencing platform for sequencing the genome of the self-flocculating microalga S. obliquus AS-6-11, and used the MECAT software for de novo genome assembly. The estimated genome size of S. obliquus AS-6-11 is 172.3 Mbp with an N50 of 94,410 bp, and 31,964 protein-coding genes were identified. Gene Ontology (GO) and KEGG pathway analyses revealed 65 GO terms and 428 biosynthetic pathways. Comparing to the genome sequences of the well-studied green microalgae Chlamydomonas reinhardtii, Chlorella variabilis, Volvox carteri and Micractinium conductrix, the genome of S. obliquus AS-6-11 encodes more unique proteins, including one gene that encodes D-mannose binding lectin. Genes encoding the glycosylphosphatidylinositol (GPI)-anchored cell wall proteins, and proteins with fasciclin domains that are commonly found in cell wall proteins might be responsible for the self-flocculating phenotype, and were analyzed in detail. Four genes encoding both GPI-anchored cell wall proteins and fasciclin domain proteins are the most interesting targets for further studies. CONCLUSIONS: The genome sequence of the self-flocculating microalgal S. obliquus AS-6-11 was annotated and analyzed. To our best knowledge, this is the first report on the in-depth annotation of the S. obliquus genome, and the results will facilitate functional genomic studies and metabolic engineering of this important microalga. The comparative genomic analysis here also provides new insights into the evolution of green microalgae. Furthermore, identification of the potential genes encoding self-flocculating proteins will benefit studies on the molecular mechanism underlying this phenotype for its better control and biotechnological applications as well.
Asunto(s)
Chlorella , Microalgas , Scenedesmus , Biomasa , Glicolatos , Microalgas/genéticaRESUMEN
Strains from Trichoderma reesei have been used for cellulase production with a long history. It has been well known that cellulase biosynthesis by the fungal species is controlled through regulators, and elucidation of their regulation network is of great importance for engineering T. reesei with robust cellulase production. However, progress in this regard is still very limited. In this study, T. reesei RUT-C30 was transformed with an artificial zinc finger protein (AZFP) library, and the mutant T. reesei M2 with improved cellulase production was screened. Compared to its parent strain, the filter paper activity and endo-ß-glucanase activity in cellulases produced by T. reesei M2 increased 67.2% and 35.3%, respectively. Analysis by quantitative reverse transcription polymerase chain reaction indicated significant downregulation of the putative gene ctf1 in T. reesei M2, and its deletion mutants were thus developed for further studies. An increase of 36.9% in cellulase production was observed in the deletion mutants, but when ctf1 was constitutively overexpressed in T. reesei RUT-C30 under the control of the strong pdc1 promoter, cellulase production was substantially compromised. Comparative transcriptomic analysis revealed that the deletion of ctf1 upregulated transcription of gene encoding the regulator VIB1, but downregulated transcription of gene encoding another regulator RCE1, which consequently upregulated genes encoding the transcription factors XYR1 and ACE3 for the activation of genes encoding cellulolytic enzymes. As a result, ctf1 was characterized as a gene encoding a repressor for cellulase production in T. reesei RUT-C30, which is significant for further elucidating molecular mechanism underlying cellulase biosynthesis by the fungal species for rational design to develop robust strains for cellulase production. And in the meantime, AZFP transformation was validated to be an effective strategy for identifying functions of putative genes in the genome of T. reesei.
Asunto(s)
Celulasa/genética , Proteínas Fúngicas/genética , Hypocreales/genética , Biosíntesis de Proteínas , Celulasa/metabolismo , Proteínas Fúngicas/metabolismo , Regulación Fúngica de la Expresión Génica , Hypocreales/metabolismo , Regiones Promotoras Genéticas , Ingeniería de Proteínas , Dedos de ZincRESUMEN
Lignocellulosic biomass has been widely studied as the renewable feedstock for the production of biofuels and biochemicals. Budding yeast Saccharomyces cerevisiae is commonly used as a cell factory for bioconversion of lignocellulosic biomass. However, economic bioproduction using fermentable sugars released from lignocellulosic feedstocks is still challenging. Due to impaired cell viability and fermentation performance by various inhibitors that are present in the cellulosic hydrolysates, robust yeast strains resistant to various stress environments are highly desired. Here, we summarize recent progress on yeast strain development for the production of biofuels and biochemical using lignocellulosic biomass. Genome-wide studies which have contributed to the elucidation of mechanisms of yeast stress tolerance are reviewed. Key gene targets recently identified based on multiomics analysis such as transcriptomic, proteomic, and metabolomics studies are summarized. Physiological genomic studies based on zinc sulfate supplementation are highlighted, and novel zinc-responsive genes involved in yeast stress tolerance are focused. The dependence of host genetic background of yeast stress tolerance and roles of histones and their modifications are emphasized. The development of robust yeast strains based on multiomics analysis benefits economic bioconversion of lignocellulosic biomass.
Asunto(s)
Biocombustibles/provisión & distribución , Etanol/metabolismo , Estudio de Asociación del Genoma Completo , Lignina/metabolismo , Saccharomyces cerevisiae/clasificación , Saccharomyces cerevisiae/metabolismo , Perfilación de la Expresión Génica , Metabolómica , Proteómica , Saccharomyces cerevisiae/genéticaRESUMEN
BACKGROUND: L-Alanyl-L-glutamine (Ala-Gln) represents the great application potential in clinic due to the unique physicochemical properties. A new approach was developed to synthesize Ala-Gln by recombinant Escherichia coli OPA, which could overcome the disadvantages of traditional chemical synthesis. Although satisfactory results had been obtained with recombinant E. coli OPA, endotoxin and the use of multiple antibiotics along with toxic inducer brought the potential biosafety hazard for the clinical application of Ala-Gln. RESULTS: In this study, the safer host Pichia pastoris was applied as an alternative to E. coli. A recombinant P. pastoris (named GPA) with the original gene of α-amino acid ester acyltransferase (SsAet) from Sphingobacterium siyangensis SY1, was constructed to produce Ala-Gln. To improve the expression efficiency of SsAet in P. pastoris, codon optimization was conducted to obtain the strain GPAp. Here, we report that Ala-Gln production by GPAp was approximately 2.5-fold more than that of GPA. The optimal induction conditions (cultivated for 3 days at 26 °C with a daily 1.5% of methanol supplement), the optimum reaction conditions (28 °C and pH 8.5), and the suitable substrate conditions (AlaOMe/Gln = 1.5/1) were also achieved for GPAp. Although most of the metal ions had no effects, the catalytic activity of GPAp showed a slight decrease in the presence of Fe3+ and an obvious increase when cysteine or PMSF were added. Under the optimum conditions, the Ala-Gln generation by GPAp realized the maximum molar yield of 63.5% and the catalytic activity of GPAp by agar embedding maintained extremely stable after 10 cycles. CONCLUSIONS: Characterized by economy, efficiency and practicability, production of Ala-Gln by recycling immobilized GPAp (whole-cell biocatalyst) is represents a green and promising way in industrial.
Asunto(s)
Aciltransferasas/metabolismo , Dipéptidos/biosíntesis , Pichia/genética , Aciltransferasas/genética , Enzimas , Glutamina/metabolismo , Microbiología Industrial/métodos , Pichia/metabolismo , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Sphingobacterium/enzimología , Sphingobacterium/genéticaRESUMEN
Due to the unique Entner-Doudoroff pathway, Zymomonas mobilis has been acknowledged as a potential host to be engineered for biorefinery to produce biofuels and biobased chemicals. The self-flocculation of Z. mobilis can make the bacterial cells self-immobilized within bioreactors for high density to improve product productivities, and in the meantime enhance their tolerance to stresses, particularly product inhibition and the toxicity of byproducts released during the pretreatment of lignocellulosic biomass. In this work, we explored mechanism underlying such a phenotype with the self-flocculating strain ZM401 developed from the regular non-flocculating strain ZM4. Cellulase de-flocculation and the restoration of the self-flocculating phenotype for the de-flocculated bacterial cells subjected to culture confirmed the essential role of cellulose biosynthesis in the self-flocculation of ZM401. Furthermore, the deactivation of both Type I and Type IV restriction-modification systems was performed for ZM4 and ZM401 to improve their transformation efficiencies. Comparative genome analysis detected the deletion of a thymine from ZMO1082 in ZM401, leading to a frame-shift mutation for the putative gene to be integrated into the neighboring downstream gene ZMO1083 encoding the catalytic subunit A of cellulose synthase, and consequently created a new gene to encode a larger transmembrane protein BcsA_401 for more efficient synthesis of cellulose as well as the development of cellulose fibrils and their entanglement for the self-flocculation of the mutant. These speculations were confirmed by the morphological observation of the bacterial cells under scanning electron microscopy, the impact of the gene deletion on the self-flocculation of ZM401, and the restoration of the self-flocculating phenotype of ZM401 ΔbcsA by the gene complementation. The progress will lay a foundation not only for fundamental research in deciphering molecular mechanisms underlying the self-flocculation of Z. mobilis and stress tolerance associated with the morphological change but also for technological innovations in engineering non-flocculating Z. mobilis and other bacterial species with the self-flocculating phenotype.
Asunto(s)
Adhesión Bacteriana , Células Inmovilizadas/enzimología , Células Inmovilizadas/metabolismo , Celulosa/metabolismo , Glucosiltransferasas/metabolismo , Zymomonas/enzimología , Zymomonas/metabolismo , Células Inmovilizadas/fisiología , Enzimas de Restricción-Modificación del ADN , Floculación , Eliminación de Gen , Genómica , Glucosiltransferasas/genética , Lignina/metabolismo , Ingeniería Metabólica , Microscopía Electrónica de Rastreo , Transformación Bacteriana , Zymomonas/citología , Zymomonas/genéticaRESUMEN
BACKGROUND: Saccharomyces cerevisiae is widely studied for production of biofuels and biochemicals. To improve production efficiency under industrially relevant conditions, coordinated expression of multiple genes by manipulating promoter strengths is an efficient approach. It is known that gene expression is highly dependent on the practically used environmental conditions and is subject to dynamic changes. Therefore, investigating promoter activities of S. cerevisiae under different culture conditions in different time points, especially under stressful conditions is of great importance. RESULTS: In this study, the activities of various promoters in S. cerevisiae under stressful conditions and in the presence of xylose were characterized using yeast enhanced green fluorescent protein (yEGFP) as a reporter. The stresses include toxic levels of acetic acid and furfural, and high temperature, which are related to fermentation of lignocellulosic hydrolysates. In addition to investigating eight native promoters, the synthetic hybrid promoter P3xC-TEF1 was also evaluated. The results revealed that P TDH3 and the synthetic promoter P3xC-TEF1 showed the highest strengths under almost all the conditions. Importantly, these two promoters also exhibited high stabilities throughout the cultivation. However, the strengths of P ADH1 and P PGK1 , which are generally regarded as 'constitutive' promoters, decreased significantly under certain conditions, suggesting that cautions should be taken to use such constitutive promoters to drive gene expression under stressful conditions. Interestingly, P HSP12 and P HSP26 were able to response to both high temperature and acetic acid stress. Moreover, P HSP12 also led to moderate yEGFP expression when xylose was used as the sole carbon source, indicating that this promoter could be used for inducing proper gene expression for xylose utilization. CONCLUSION: The results here revealed dynamic changes of promoter activities in S. cerevisiae throughout batch fermentation in the presence of inhibitors as well as using xylose. These results provide insights in selection of promoters to construct S. cerevisiae strains for efficient bioproduction under practical conditions. Our results also encouraged applications of synthetic promoters with high stability for yeast strain development.
Asunto(s)
Regulación Fúngica de la Expresión Génica , Microbiología Industrial , Regiones Promotoras Genéticas , Proteínas de Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/genética , Ácido Acético/farmacología , Biocombustibles , Fermentación , Furaldehído/farmacología , Proteínas Fluorescentes Verdes/genética , Calor , Saccharomyces cerevisiae/crecimiento & desarrollo , Estrés Fisiológico , Xilosa/químicaRESUMEN
Marine actinobacterium Streptomyces xinghaiensis NRRL B-24674T has been characterized as a novel species, but thus far, its biosynthetic potential remains unexplored. In this study, the high-quality genome sequence of S. xinghaiensis NRRL B-24674T was obtained, and the production of anticomplement agents, xiamycin analogs, and siderophores was investigated by genome mining. Anticomplement compounds are valuable for combating numerous diseases caused by the abnormal activation of the human complement system. The biosynthetic gene cluster (BGC) nrps1 resembles that of complestatins, which are potent microbial-derived anticomplement agents. The identification of the nrps1 BGC revealed a core peptide that differed from that in complestatin; thus, we studied the anticomplement activity of this strain. The culture broth of S. xinghaiensis NRRL B-24674T displayed good anticomplement activity. Subsequently, the disruption of the genes in the nrps1 BGC resulted in the loss of anticomplement activity, confirming the involvement of this BGC in the biosynthesis of anticomplement agents. In addition, the mining of the BGC tep5, which resembles that of the antiviral pentacyclic indolosesquiterpene xiamycin, resulted in the discovery of nine xiamycin analogs, including three novel compounds. In addition to the BGCs responsible for desferrioxamine B, neomycin, ectoine, and carotenoid, 18 BGCs present in the genome are predicted to be novel. The results of this study unveil the potential of S. xinghaiensis as a producer of novel anticomplement agents and provide a basis for further exploration of the biosynthetic potential of S. xinghaiensis NRRL B-24674T for the discovery of novel bioactive compounds by genome mining.
Asunto(s)
Proteínas Bacterianas/genética , Proteínas Inactivadoras de Complemento/biosíntesis , Genoma Bacteriano , Familia de Multigenes , Sesquiterpenos/metabolismo , Streptomyces/genética , Secuencia de Aminoácidos , Proteínas Bacterianas/metabolismo , Proteínas Inactivadoras de Complemento/química , Datos de Secuencia Molecular , Estructura Molecular , Filogenia , Alineación de Secuencia , Sesquiterpenos/química , Streptomyces/química , Streptomyces/clasificación , Streptomyces/metabolismoRESUMEN
Ethanol fermentation from Jerusalem artichoke tubers was performed at elevated temperatures by the consolidated bioprocessing strategy using Saccharomyces cerevisiae MK01 expressing inulinase through cell surface display. No significant difference was observed in yeast growth when temperature was controlled at 38 and 40 °C, respectively, but inulinase activity with yeast cells was substantially enhanced at 40 °C. As a result, enzymatic hydrolysis of inulin was facilitated and ethanol production was improved with 89.3 g/L ethanol produced within 72 h from 198.2 g/L total inulin sugars consumed. Similar results were also observed in ethanol production from Jerusalem artichoke tubers with 85.2 g/L ethanol produced within 72 h from 185.7 g/L total sugars consumed. On the other hand, capital investment on cooling facilities and energy consumption for running the facilities would be saved, since regular cooling water instead of chill water could be used to cool down the fermentation system.
Asunto(s)
Etanol/metabolismo , Glicósido Hidrolasas/genética , Helianthus/química , Microbiología Industrial/métodos , Saccharomyces cerevisiae/enzimología , Saccharomyces cerevisiae/genética , Glicósido Hidrolasas/metabolismo , Hidrólisis , Inulina/metabolismo , Microorganismos Modificados Genéticamente/genética , Tubérculos de la Planta/química , TemperaturaRESUMEN
Butanol has recently gained increasing interest due to escalating prices in petroleum fuels and concerns on the energy crisis. However, the butanol production cost with conventional acetone-butanol-ethanol fermentation by Clostridium spp. was higher than that of petrochemical processes due to the low butanol titer, yield, and productivity in bioprocesses. In particular, a low butanol titer usually leads to an extremely high recovery cost. Conventional biobutanol recovery by distillation is an energy-intensive process, which has largely restricted the economic production of biobutanol. This article thus reviews the latest studies on butanol recovery techniques including gas stripping, liquid-liquid extraction, adsorption, and membrane-based techniques, which can be used for in situ recovery of inhibitory products to enhance butanol production. The productivity of the fermentation system is improved efficiently using the in situ recovery technology; however, the recovered butanol titer remains low due to the limitations from each one of these recovery technologies, especially when the feed butanol concentration is lower than 1 % (w/v). Therefore, several innovative multi-stage hybrid processes have been proposed and are discussed in this review. These hybrid processes including two-stage gas stripping and multi-stage pervaporation have high butanol selectivity, considerably higher energy and production efficiency, and should outperform the conventional processes using single separation step or method. The development of these new integrated processes will give a momentum for the sustainable production of industrial biobutanol.
Asunto(s)
Biocombustibles , Biotecnología/métodos , Butanoles/aislamiento & purificación , Butanoles/metabolismo , Clostridium/metabolismo , FermentaciónRESUMEN
Lignocellulose is an alternative to fossil resources, but its biochemical conversion is not economically competitive. While decentralized processing can reduce logistical cost for this feedstock, sugar platforms need to be developed with energy-saving pretreatment technologies and cost-effective cellulases, and products must be selected correctly. Anaerobic fermentation with less energy consumption and lower contamination risk is preferred, particularly for producing biofuels. Great effort has been devoted to producing cellulosic ethanol, but CO2 released with large quantities during ethanol fermentation must be utilized in situ for credit. Unless titer and yield are improved substantially, butanol cannot be produced as an advanced biofuel. Microbial lipids produced through aerobic fermentation with low yield and intensive energy consumption are not affordable as feedstocks for biodiesel production.
Asunto(s)
Etanol , Lignina , Lignina/metabolismo , Etanol/metabolismo , Fermentación , Butanoles , BiocombustiblesRESUMEN
Lignocellulose presents a promising alternative to fossil fuels. Monitoring the mass and size changes of lignocellulosic particles without disrupting the process can assist in adjusting pretreatment and enzymatic hydrolysis, where conventional sieving methods fall short. A method utilizing focused beam reflectance measurement (FBRM) was developed to establish mathematical correlations between FBRM chord information (chord length and count) and particle characteristics (weight and size) quantified through sieving. Results indicate particle size exhibits a linear correlation with the square weighted median chord length (Lsqr) with R2 at 0.93. Further, real-time bulk particle mass can be predicted using Lsqr and chord count (R2 0.98). These correlations are applicable in range 53 µm to 358.5 µm. Real-time monitoring of enzymatic hydrolysis of corn stalks has demonstrated the practical applicability of FBRM. This study introduces a novel approach for online characterization of lignocellulosic particles, thereby enhancing lignocellulosic biorefineries.
Asunto(s)
Lignina , Tamaño de la Partícula , Lignina/química , Zea mays/química , Hidrólisis , Biotecnología/métodosRESUMEN
Formate as an ideal mediator between the physicochemical and biological realms can be obtained from electrochemical reduction of CO2 and used to produce bio-chemicals. Yet, limitations arise when employing natural formate-utilizing microorganisms due to restricted product range and low biomass yield. This study presents a breakthrough: engineered Corynebacterium glutamicum strains (L2-L4) through modular engineering. L2 incorporates the formate-tetrahydrofolate cycle and reverse glycine cleavage pathway, L3 enhances NAD(P)H regeneration, and L4 reinforces metabolic flux. Metabolic modeling elucidates C1 assimilation, guiding strain optimization for co-fermentation of formate and glucose. Strain L4 achieves an OD600 of 0.5 and produces 0.6 g/L succinic acid. 13C-labeled formate confirms C1 assimilation, and further laboratory evolution yields 1.3 g/L succinic acid. This study showcases a successful model for biologically assimilating formate in C. glutamicum that could be applied in C1-based biotechnological production, ultimately forming a formate-based bioeconomy.
Asunto(s)
Biomasa , Corynebacterium glutamicum , Formiatos , Ingeniería Metabólica , Ácido Succínico , Corynebacterium glutamicum/metabolismo , Formiatos/metabolismo , Ingeniería Metabólica/métodos , Ácido Succínico/metabolismo , Fermentación , Modelos Biológicos , Glucosa/metabolismoRESUMEN
Anaerobic digestion (AD) is an effective and applicable technology for treating organic wastes to recover bioenergy, but it is limited by various drawbacks, such as long start-up time for establishing a stable process, the toxicity of accumulated volatile fatty acids and ammonia nitrogen to methanogens resulting in extremely low biogas productivities, and a large amount of impurities in biogas for upgrading thereafter with high cost. Microbial electrolysis cell (MEC) is a device developed for electrosynthesis from organic wastes by electroactive microorganisms, but MEC alone is not practical for production at large scales. When AD is integrated with MEC, not only can biogas production be enhanced substantially, but also upgrading of the biogas product performed in situ. In this critical review, the state-of-the-art progress in developing AD-MEC systems is commented, and fundamentals underlying methanogenesis and bioelectrochemical reactions, technological innovations with electrode materials and configurations, designs and applications of AD-MEC systems, and strategies for their enhancement, such as driving the MEC device by electricity that is generated by burning the biogas to improve their energy efficiencies, are specifically addressed. Moreover, perspectives and challenges for the scale up of AD-MEC systems are highlighted for in-depth studies in the future to further improve their performance.
Asunto(s)
Fuentes de Energía Bioeléctrica , Biocombustibles , Electrólisis , Anaerobiosis , Fuentes de Energía Bioeléctrica/microbiología , Reactores Biológicos , Metano/metabolismoRESUMEN
Manipulation of multiple genes is a common experience in metabolic engineering and synthetic biology studies. Chromosome integration of multiple genes in one single position is always performed, however, there is so far no study on the integration of multiple genes separately in various positions (here in after referred to as "scattered integration") and its effect on fine-tuning of cellular metabolism. In this study, scattered integration of the xylose assimilation genes PsXR, PsXDH and ScXK was investigated in Saccharomyces cerevisiae, and transcription analysis of these genes as well as their enzyme activities were compared with those observed when the genes were integrated into one single site (defined as "tandem integration" here). Not only notable differences in transcription levels and enzyme activities were observed when the genes were integrated by the two strategies, but also change of the cofactor preference of PsXR gene was validated. Xylose fermentation was further studied with the strains developed with these strategies, and elevated xylose utilization rate was obtained in the scattered integration strain. These results proved that by positioning multiple genes on different chromosomes, fine-tuning of cellular metabolism could be achieved in recombinant S. cerevisiae.