Formulation and performance evaluation of emulgel platform for combined skin delivery of curcumin and propolis.

The environment can modify the physiology and body protective function of the skin. Propolis (PRP) and curcumin (CUR) possess important antioxidant and antimicrobial properties, and they can be administered in a combined way and using photodynamic therapy (PDT). Emulgels can control drug release due to the physicochemical properties of the gel and the emulsion. They constitute a good strategy for achieving an improved platform for the combined delivery of PRP and CUR. There are no other studies of emulgels composed of PRP and CUR and their performance as antimicrobial and skin healing using or not PDT. This study aimed to investigate the effect of Carbopol 934 P (C934P), 974 P (C974P) or polycarbophil (PC) on physicochemical stability, antioxidant activity, drug release profile, antimicrobial activity, and ex vivo skin permeation and retention of emulgels containing PRP and CUR. Formulations containing C974P or PC displayed improved stability and antioxidant activity. They displayed activity against Staphylococcus aureus and modified (extended) drug release, governed mainly by non-Fickian anomalous transport. C974P and PC resulted in improved emulgels for combined CUR and PRP delivery, allowing the drugs to cross the stratum corneum, and permeate the epidermis, reaching the dermis. The selected emulgels are candidates for further studies to prove their action and benefits to skin health.

Thermosensitive gel based on cellulose derivative for topical delivery of propolis in acne treatment.

Thermosensitive bioadhesive formulations can display increased retention time, skin permeation, and improve the topical therapy of many drugs. Acne is an inflammatory process triggered by several factors like the proliferation of the bacteria Propionibacterium acnes. Aiming for a new alternative treatment with a natural source, propolis displays great potential due to its antibiotic, anti-inflammatory, and healing properties. This study describes the development of bioadhesive thermoresponsive platform with cellulose derivatives and poloxamer 407 for propolis skin delivery. Propolis ethanolic extract (PES) was added to the formulations with sodium carboxymethylcellulose (CMC) or hydroxypropyl methylcellulose (HPMC) and poloxamer 407 (Polox). The formulations were characterized as rheology, bioadhesion, and mechanical analysis. The selected formulations were investigated as in vitro propolis release, cytotoxicity, ex vivo skin permeation by Fourier Transform Infrared Photoacoustic Spectroscopy, and the activity against P. acnes. Formulations showed suitable sol-gel transition temperature, shear-thinning behavior, and texture profile. CMC presence decreased the cohesiveness and adhesiveness of formulations. Polox/HPMC/PES system displayed less cytotoxicity, modified propolis release governed by anomalous transport, skin permeation, and activity against P. acnes. These results indicate important advantages in the topical treatment of acne and suggest a potential formulation for clinical evaluation.

Emulgels Containing Carbopol 934P and Different Vegetable Oils for Topical Propolis Delivery: Bioadhesion, Drug Release Profile, and Ex Vivo Skin Permeation Studies.

Topical administration can enable a more efficient therapy based on the improved bioavailability and patient compliance. Wounds and infections can lead to modifications of skin physiology and body protective function. Propolis (PRP) is utilized for skin protection and treatment. However, PRP extracts do not show suitable rheological characteristics and can cause irritation, pain, ulceration, and healing difficulties when they are administered on the harmed skin. Emulgels composed of Carbopol 934P (C934P) and different vegetable oils have been proposed for propolis extract release and may be a good strategy for topical delivery. The aim of this study was to investigate the bioadhesive properties, PRP release profile, skin permeation, and retention, by Franz's diffusion cell and photoacoustic spectroscopy (PS), of these emulgels. Formulations were composed of C934P and passion fruit oil (PF), sweet almond oil (SA), or andiroba oil (AO). PRP or by-product extracts were added to the systems, drug release profile was investigated, and porcine ear skin was utilized for analyses of bioadhesive properties, skin permeation, and retention. All formulations displayed similar bioadhesive force (0.05-0.07 N); PRP release was modified (prolonged), dependent on formulation composition, and mainly governed by diffusion. PS and analysis using diffusion cell showed that the systems could provide dermal permeation and retention, which was more effective for formulations containing AO. Considering the importance of propolis for many skin therapies, the emulgels containing AO for PRP delivery are worthy of biological studies and further clinical evaluation.

A critical review about methodologies for the analysis of mucoadhesive properties of drug delivery systems.

Mucoadhesion is a useful strategy for drug delivery systems, such as tablets, patches, gels, liposomes, micro/nanoparticles, nanosuspensions, microemulsions and colloidal dispersions. Moreover, it has contributed to many benefits like increased residence time at application sites, drug protection, increased drug permeation and improved drug availability. In this context, investigation into the mucoadhesive properties of pharmaceutical dosage forms is fundamental, in order to characterize, understand and simulate the in vivo interaction between the formulation and the biological substrate, contributing to the development of new mucoadhesive systems with effectiveness, safety and quality. There are a lot of in vivo, in vitro and ex vivo methods for the evaluation of the mucoadhesive properties of drug delivery systems. However, there also is a lack of standardization of these techniques, which makes comparison between the results difficult. Therefore, this work aims to show an overview of the most commonly employed methods for mucoadhesion evaluation, relating them to different proposed systems and using artificial or natural mucosa from humans and animals.

Design and characterization of polymeric microneedles containing extracts of Brazilian green propolis.

Microneedles (MNs) are a means to break the protective skin barrier in a minimally invasive way. By creating temporary micropores, they make biologically active agents available in the skin layers. Propolis (PRP) is a gum resin with a complex chemical composition, produced by bees Apis mellifera L. and showing several therapeutic properties (i.e., antibacterial, antiviral, antifungal, anti-inflammatory, healing, and immunomodulatory properties). The administration of PRP extracts by conventional routes has some disadvantages, such as running off over the skin in liquid or emulsion form. When taken orally, the extracts have a strong and unpleasant taste. The aim of this work was to fabricate and characterize microneedles containing polyvinyl alcohol, polyvinylpyrrolidone, poloxamer P407, and an ethanolic or glycolic extract of PRP. Also, the obtained structures were microscopically and mechanically characterized. The results of the mechanical analysis showed that formulations containing 3% of P407 presented the highest compression values in a hard surface, which was also confirmed by the height and base values of the morphological analysis and by the microscopy images. It was possible to design MNs and select the best formulations for future tests. MNs containing an ethanolic extract of PRP showed to be better structured than MNs containing a glycolic extract of PRP. The MNs obtained in these studies proved to be a promising platform for the topical application of PRP.

Design and Optimization of a Natural Medicine from Copaifera reticulata Ducke for Skin Wound Care.

In this study, we developed a bioadhesive emulsion-filled gel containing a high amount of Copaifera reticulata Ducke oil-resin as a veterinary or human clinical proposal. The phytotherapeutic system had easy preparation, low cost, satisfactory healing ability, and fly repellency, making it a cost-effective clinical strategy for wound care and myiasis prevention. Mechanical, rheological, morphological, and physical stability assessments were performed. The results highlight the crosslinked nature of the gelling agent, with three-dimensional channel networks stabilizing the Copaifera reticulata Ducke oil-resin (CrD-Ore). The emulgel presented antimicrobial activity, satisfactory adhesion, hardness, cohesiveness, and viscosity profiles, ensuring the easy spreading of the formulation. Considering dermatological application, the oscillatory responses showed a viscoelastic performance that ensures emulgel retention at the action site, reducing the dosage frequencies. In Vivo evaluations were performed using a case report to treat ulcerative skin wounds aggravated by myiasis in calves and heifers, which demonstrated healing, anti-inflammatory, and repellent performance for the emulsion-filled gel. The emulgel preparation, which is low in cost, shows promise as a drug for wound therapy.

Emulgels Containing Propolis and Curcumin: The Effect of Type of Vegetable Oil, Poly(Acrylic Acid) and Bioactive Agent on Physicochemical Stability, Mechanical and Rheological Properties.

Emulgels are obtained by the entrapment of an organic phase within a three-dimensional network built by hydrophilic molecules. Polymers based on cross-linked poly(acrylic acid) have been utilized as gel matrices, improving adhesiveness, rheological and mechanical performance. Propolis (PRP) produced by Apis mellifera L. bees displays a wide range of biological activities. Together with curcumin (CUR), they may show synergic anti-inflammatory, antioxidant and antimicrobial action on skin disorders. This work investigated the effect of vegetable oils (sweet almond, andiroba, and passion fruit) with regard to the physicochemical properties of emulgels composed of Carbopol 934P®, Carbopol 974P®, or polycarbophil aiming the CUR and PRP delivery. Physicochemical stability enabled the selection of systems containing passion fruit or andiroba oil. Mechanical and rheological characteristics provided rational comprehension of how vegetable oils and bioactive agents affect the structure of emulsion gels. All formulations exhibited high physiochemical stability and properties dependent on the polymer type, oil, and bioactive agent. Formulations displayed pseudoplastic, thixotropic and viscoelastic properties. Emulgels containing andiroba oil were the most stable systems. Carbopol 934P® or polycarbophil presence resulted in formulations with improved smoothness and mechanical properties. Systems containing andiroba oil and one of these two polymers are promising for further investigations as topical delivery systems of CUR and/or PRP on the skin and mucous membranes.

The effect of erythrosine-B on the structuration of poloxamer 407 and cellulose derivative blends: In silico modelling supporting experimental studies.

Erythrosine is a dye approved for medical use that has shown promising photodynamic activity, allowing for the inactivation of microorganisms and activity against malignant cells. Despite the great photodynamic potential, erythrosine exhibits hydrophilicity, negatively impacting its action in biological membranes. Therefore, the incorporation of erythrosine in micellar polymeric systems, such as poloxamers, may overcome this limitation. Moreover, using bioadhesive and thermoresponsive polymers to combine in situ gelation and bioadhesion may enhance retention of this topically applied drug. In this work, mucoadhesive and thermoresponsive micellar systems were prepared containing erythrosine in two states: the native form (ERI) and the disodium salt (ERIs). The systems were evaluated based on the effect of ERI/ERIs on the micellar structure of the binary polymer mixtures. Optimised combinations of poloxamer 407 (polox407) and mucoadhesive sodium carboxymethylcellulose (NaCMC) or hydroxypropyl methylcellulose (HPMC) were used as micellar systems for ERI or ERIs delivery. The systems were studied with respect to theoretical interactions, qualitative composition, morphology, and micellar properties. In silico modelling indicated a higher interaction of the drug with poly(ethylene oxide) (PEO) than poly(propylene oxide) (PPO) fragments of polox407. Systems containing NaCMC displayed a repulsive effect in the presence of erythrosine, due to the polymer's charge density. Both systems could convert the photosensitizer in its monomeric form, ensuring photodynamic activity. In these mixtures, crystallinity, critical micellar temperature and enthalpy of polox407 micellisation were reduced, and micellar size, evaluated by transmission electron microscopy (TEM), showed low impact of ERI/ERIs in HPMC preparations. Aiming toward photodynamic applications, the findings showed how ERI or ERIs can affect the micellar formation of gels composed of 17.5% (w/w) polox407 and 3% (w/w) HPMC or 1% (w/w) NaCMC, important for understating their behaviour and future utilisation as erythrosine delivery systems.

Preclinical evaluation of methotrexate-loaded polyelectrolyte complexes and thermosensitive hydrogels as treatment for rheumatoid arthritis.

This work proposes new methotrexate (MTX) loaded drug delivery systems (DDS) to treat rheumatoid arthritis via the intra-articular route: a poloxamer based thermosensitive hydrogel (MTX-HG), oligochitosan and hypromellose phthalate-based polyelectrolyte complexes (MTX-PEC) and their association (MTX-PEC-HG). MTX-PEC showed 470 ± 166 nm particle size, 0.298 ± 0.108 polydispersity index, +26 ± 2 mV and 74.3 ± 5.8% MTX efficiency entrapment and particle formation was confirmed by infrared spectroscopy and thermal analysis. MTX-HG and MTX-PEC-HG gelled at 36.7°C. MTX drug release profile was prolonged for MTX-HG and MTX-PEC-HG, and faster for MTX-PEC and free MTX. The in vivo effect of the MTX-DDSs systems was evaluated in induced arthritis rats as single intra-articular dose. The assessed parameters were the mechanical nociceptive threshold, the plasmatic IL-1ß level and histological analysis of the tibiofemoral joint. MTX-HG and MTX-PEC-HG performance were similar to free MTX and worse than oral MTX, used as positive control. All DDSs showed some irritative effect, for which further studies are required. MTX-PEC was the best treatment on recovering cartilage damage and decreasing allodynia. Thus, MTX-PEC demonstrated potential to treat rheumatoid arthritis, with the possibility of decreasing the systemic exposure to the drug.

Development and in vitro evaluation of buccal mucoadhesive films for photodynamic inactivation of Candida albicans.

Candidiasis is one of the most common diseases that occur in the oral cavity, caused mainly by the species Candida albicans. Methylene blue (MB) has a potential for microbial photoinactivation and can cause the destruction of fungi when applied in Photodynamic Therapy (PDT). Mucoadhesive films are increasingly being studied as a platform for drug application due to their advantages when compared to other pharmaceutical forms. The aim of this work was to develop mucoadhesive buccal film containing poloxamer 407 (P407), alcohol polyvinyl (PVA) and polyvinylpyrrolidone (PVP) for the release of MB aiming the photoinactivation of Candida albicans in buccal infections. Different amounts of P407 were added to the binary polymeric blends composed PVA and PVP. Formulations were characterized as morphology, thickness, density, bending strength, mechanical properties, water vapor transmission, disintegration time, mucoadhesion, DSC, ATR-FTIR, in vitro drug release profile and photodynamic inactivation. The films displayed physicochemical characteristics dependent of polymeric composition, mucoadhesive properties, fast MB release and were effective in photo inactivate the local growth of Candida albicans isolates. The formulation containing the lowest PVA and P407 amounts displayed the best performance. Therefore, data obtained from the film system show its potentially useful role as a platform for buccal MB delivery in photoinactivation of C. albicans, showing its potential for in vivo evaluation.

Assessing Mucoadhesion in Polymer Gels: The Effect of Method Type and Instrument Variables.

The process of mucoadhesion has been widely studied using a wide variety of methods, which are influenced by instrumental variables and experiment design, making the comparison between the results of different studies difficult. The aim of this work was to standardize the conditions of the detachment test and the rheological methods of mucoadhesion assessment for semisolids, and introduce a texture profile analysis (TPA) method. A factorial design was developed to suggest standard conditions for performing the detachment force method. To evaluate the method, binary polymeric systems were prepared containing poloxamer 407 and Carbopol 971P®, Carbopol 974P®, or Noveon® Polycarbophil. The mucoadhesion of systems was evaluated, and the reproducibility of these measurements investigated. This detachment force method was demonstrated to be reproduceable, and gave different adhesion when mucin disk or ex vivo oral mucosa was used. The factorial design demonstrated that all evaluated parameters had an effect on measurements of mucoadhesive force, but the same was not observed for the work of adhesion. It was suggested that the work of adhesion is a more appropriate metric for evaluating mucoadhesion. Oscillatory rheology was more capable of investigating adhesive interactions than flow rheology. TPA method was demonstrated to be reproducible and can evaluate the adhesiveness interaction parameter. This investigation demonstrates the need for standardized methods to evaluate mucoadhesion and makes suggestions for a standard study design.