Preparation and in vitro characterization of vascular endothelial growth factor (VEGF)-loaded poly(D,L-lactic-co-glycolic acid) microspheres using a double emulsion/solvent evaporation technique.

Biodegradable Poly(lactic-co-glycolic acid; PLGA), microspheres encapsulating the angiogenic protein recombinant human vascular endothelial growth factor (rhVEGF) were formed to achieve VEGF release in a sustained manner. These microspheres are a promising delivery system which can be used for therapeutic angiogenesis. The PLGA microspheres incorporating two different initial loading amounts of rhVEGF have been prepared by a modified water-in-oil-in-water (w/o/w) double emulsion/solvent evaporation technique. The microspheres have been characterized by particle size distribution, environmental scanning electron microscopy (ESEM), light microscopy, encapsulation efficiency and their degradation was studied in vitro. The rhVEGF released from microspheres was quantified by the competitive enzyme-linked immunosorbent assay (ELISA) and human umbilical vein endothelial cell (HUVEC) proliferation assay was used to assess biological activity of the released VEGF. The microspheres were spherical with diameters of 10-60 µm and the encapsulation efficiency was between 46% and 60%. The release kinetics of rhVEGF was studied for two different amounts: 5 µg VEGF (V5) and 50 µg VEGF (V50) per 500 mg starting polymer. The total protein (VEGF:BSA) release increased up to 4 weeks for two rhVEGF concentrations. The ELISA results showed that the burst release for V5 and V50 microspheres were 4 and 27 ng/mL, respectively. For V5, the microspheres showed an initial burst release, followed by a higher steady-state release until 14 days. VEGF release increased up to 2 weeks for V50 microsphere. HUVEC proliferation assay showed that endothelial cells responded to bioactive VEGF by proliferating and migrating.

Preparation of poly(N-isopropylacrylamide/itaconic acid) copolymeric hydrogels and their drug release behavior.

N-isopropylacrylamide/itaconic acid copolymeric hydrogels were prepared by irradiation of the ternary mixtures of N-isopropylacrylamide/itaconic acid/water by gamma-rays at ambient temperature. The effect of comonomer concentration, irradiation dose and pH on the swelling equilibria were studied. Lidocaine was used as a model drug for the investigation of drug release behaviour of hydrogels. Lidocaine adsorption capacity of the hydrogels were found to increase from 3.6 to 862.1 (mg lidocaine/g dry gel) with increasing amount of itaconic acid in the gel structure. Adsorption and release processes were followed at 4 and 37 degrees C, respectively. The release studies showed that the basic parameters affecting the drug release behaviour of the hydrogels were pH and temperature of the solution and cross-link density of the gels.

Alginate/polyoxyethylene and alginate/gelatin hydrogels: preparation, characterization, and application in tissue engineering.

Hydrogels are attractive biomaterials for three-dimensional cell culture and tissue engineering applications. The preparation of hydrogels using alginate and gelatin provides cross-linked hydrophilic polymers that can swell but do not dissolve in water. In this work, we first reinforced pure alginate by using polyoxyethylene as a supporting material. In an alginate/PEO sample that contains 20 % polyoxyethylene, we obtained a stable hydrogel for cell culture experiments. We also prepared a stable alginate/gelatin hydrogel by cross-linking a periodate-oxidized alginate with another functional component such as gelatin. The hydrogels were found to have a high fluid uptake. In this work, preparation, characterization, swelling, and surface properties of these scaffold materials were described. Lyophilized scaffolds obtained from hydrogels were used for cell viability experiments, and the results were presented in detail.

Chitosan/alginate crosslinked hydrogels: preparation, characterization and application for cell growth purposes.

Chitosan hydrogels may be formed by various mechanisms. In this study, we aimed to form hybrid polymer networks of chitosan with alginate using a crosslinker which enabled the covalent binding of the two macromolecules. The structural and thermal characterization of these hydrogels was performed by using Fourier transform infrared (FTIR) and differential scanning calorimeter (DSC). The morphological analysis of the crosslinked material was investigated by scanning electron microscopy (SEM) and a scanning probe microscope with atomic force microscope (AFM) attachment. The swelling properties of these gels were analyzed in water and in phosphate buffered saline (PBS) solution. The presence of alginate in a chitosan/alginate hydrogel was shown to support the hydrogel stability. Compared to chitosan/alginate (1/2) hydrogel prepared with 1wt% DCC, the swelling of chitosan/alginate (1/2) hydrogels prepared with 3wt% DCC was limited. To measure the degree of cell proliferation, the hydrogels were seeded with L929 mouse fibroblasts and cell numbers measured by neutral red uptake assay. The cell attachment was also followed by (SEM) photography. It was observed that chitosan/alginate (1/2) hydrogels with 1wt% (DCC) provides a better environment for cell attachment and proliferation. This study presents functional hydrogel formation by crosslinked chitosan and alginate, a novel biomaterial which also supports cell growth.

Synthesis and characterization of poly(L-lactic acid-co-ethylene oxide-co-aspartic acid) and its interaction with cells.

Multiblock terpolymer of poly(L-lactic acid)/poly(ethylene oxide)/poly(L-aspartic acid), (PLLA/PEO/PAsp) was synthesized by ring opening polymerization of beta -benzyl L-aspartate N-carboxyanhydride, Asp(OBzl)-NCA with alpha-omega -hydroxy terminated triblock PLLA/PEO/PLLA copolymer. The resulting multiblock terpolymer was characterized by several techniques including Fourier transform infrared spectroscopy and differential scanning calorimetry.(1)H nuclear magnetic resonance spectra indicated the molar ratio of PLLA/PEO/PAsp (OBzl) to be 86/10/4. Thermal gravimetric analysis and environmental scanning electron microscopy data showed that PLLA/PEO/PAsp had crystalline and brittle structure. In order to improve its mechanical and physical properties, the terpolymer was blended with high molecular weight poly(L-lactic-co-glycolic acid) copolymer, PLGA(85/15) (M(w): 95000 gmol(-1)) in 25/75 and 50/50 mole ratios. The hydrolytical degradation properties of these polymers were studied. Degradation experiments were performed during a 48-day period in pH:7.4 phosphate-buffered saline (PBS) at 37 degrees C. The observed molecular weight losses were 91% and 67% for the 25/75 and 50/50 mixtures, respectively. In vitro attachment and growth of L929 mouse fibroblasts on these biopolymers were also investigated. Cell growth experiments indicated that the copolymer blend allowed the attachment and growth of cells.

Synthesis and characterization of poly(ethylene glycol)-poly(D,L-lactide-co-glycolide) poly(ethylene glycol) tri-block co-polymers modified with collagen: a model surface suitable for cell interaction.

This study focused on the synthesis and characterization of poly(ethylene glycol)-poly(D,L-lactide-co-glycolide)-poly(ethylene glycol) tri-block co-polymer (PEG-PDLLG-PEG), and its modification with type-I collagen. To this aim, a PEG-PDLLG-PEG tri-block co-polymer was synthesized in two steps by reacting poly(ethylene glycol)bis(carboxymethyl)ether with thionyl chloride to obtain an acyl-halide-terminated poly(ethylene glycol) and subsequently coupling this compound to hydroxyl-terminated poly(D,L-lactide-co-glycolide) (PDLLG). The new carboxyl endgroups of PEG-PDLLG-PEG were subsequently reacted with N-hydroxysuccinimide (NHS) in the presence of the hetero-bifunctional cross-linking agent dicyclohexylcarbodiimide (DCC) in order to activate the co-polymer for coupling with collagen. PEG-PDLLG-PEG and its activated form PEG-PDLLG-NHS were characterized by Fourier transform infrared (FT-IR) and 1H-NMR spectroscopy. Molecular weights of the polymeric products were determined by SEC. Type-I collagen in phosphate buffer was reacted with PEG-PDLLG-NHS. The resultant product, PEG-PDLLG-Col, was characterized by FT-IR. This biopolymer was used for preparation of a suitable surface for cell growth experiment. To measure the degree of cell proliferation, the films prepared with PDLLG, PEG-PDLLG-NHS and PEG-PDLLG-Col were seeded with L929 mouse fibroblasts. Cell growth was followed by SEM photography and quantitated by the neutral red uptake assay. It was shown that the attachment of collagen significantly increased the number of cells on the co-polymers.

Synthesis and characterization of glycolide, L-lactide, and PDMS-based terpolymers as a support for cell cultures.

Poly(lactic acid)/poly(glycolic acid)/poly(dimethylsiloxane) (PLGA/TEGOMER) terpolymers have been synthesized by the ring-opening polymerization of L-lactide and glycolide with alpha,omega-amine-terminated poly(dimethylsiloxane) prepolymer, using stannous octoate as a catalyst. The resulting terpolymers were characterized by various analytical techniques including size exclusion chromatography, 1H-nuclear magnetic resonance (1H-NMR), Fourier transform infrared spectroscopy, and differential scanning calorimetry. The data showed that the terpolymers presented an amorphous structure. The glass transition temperature decreased with increasing TEGOMER unit content. For in vitro degradation studies, porous films were fabricated using a solvent-casting, particulate leaching technique. Degradation of the PLGA/TEGOMER terpolymer was studied in phosphate-buffered saline at pH 7.4 and 37 degrees C. The degradation was followed by intrinsic viscosity, mass loss, and molecular weight measurements, and 1H-NMR spectroscopy. The mass loss after 55 days was 76% for the PLGA/TEGOMER (71/24/5) sample. Cell growth experiments using Swiss 3T3 fibroblasts demonstrated that PLGA/TEGOMER terpolymer matrices allow the attachment and growth of cells.